[U-Boot] [PATCH 1/3] armv7/fsl-ls102xa: Workaround for DDR erratum A008514

[York Sun]

On 08/13/2015 11:54 PM, Yuan Yao wrote:
> Affects: DDR
> Description: Memory controller performance is not optimal with default
> internal target queue register values.
> Impact: Memory controller performance is not optimal.
> Workaround: Write a value of 63b2_0002h to address: 157_020Ch.
> 
> Signed-off-by: Yuan Yao <yao.yuan at freescale.com>
> ---
>  arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h |  2 +-
>  board/freescale/ls1021aqds/ls1021aqds.c           | 10 ++++++++++
>  board/freescale/ls1021atwr/ls1021atwr.c           | 10 ++++++++++
>  3 files changed, 21 insertions(+), 1 deletion(-)

Yuan,

This is a wrong place to implement this workaround. It is a SoC erratum, not a
board erratum. This erratum applies to both LS1021A and LS2085A. The workaround
for LS2085A is already implemented in drivers/ddr/fsl/fsl_ddr_gen4.c. LS1021A
supports both DDR3 and DDR4 modes. I started a discussion (CC'ed you) with the
designer to clarify if both modes are impacted. If yes, you can add the
workaround in drivers/ddr/fsl/arm_ddr_gen3.c, and make sure to add proper
address offset in drivers/ddr/fsl/fsl_ddr_gen4.c.

York