[U-Boot] [PATCH v3 0/4] sunxi: nand: Basic NAND driver for SPL

[Hans de Goede]

Hi,

On 01-08-15 21:22, Scott Wood wrote:
> On Sat, 2015-08-01 at 14:30 +0200, Boris Brezillon wrote:
>> Hi Hans,
>>
>> On Sat, 1 Aug 2015 14:15:53 +0200
>> Hans de Goede <hdegoede at redhat.com> wrote:
>>
>>> Hi,
>>>
>>> On 23-07-15 14:33, Piotr Zierhoffer wrote:
>>>> This is a basic driver for the sunxi NAND controller for Allwinner A20.
>>>> It supports only SPL.
>>>>
>>>> The driver uses DMA for data transfers. It does not support writing.
>>>
>>> Thanks for your work on this.
>>>
>>> I've merged patches 1 - 3 in my sunxi-wip branch,
>>> and I'll include them in the next u-boot-sunxi pull-req.
>>
>> Shouldn't we at least wait for Scoot's approval?
>
> Or Scott's. :-)
>
> ACK

Thanks.

> though I'd encourage quickly implementing multiple spl payload locations
> to work around the breakage of the bad block marker mechanism, as was
> discussed.

I agree 100%, I've added note to my sunxi todo list for this. Note I only
have this on my todo list as a reminder, since a few other people are actively
working on sunxi nand support I hope that someone else will tackle this.

Regards,

Hans