[U-Boot] [PATCH v2 06/19] cros_ec: Support the LDO access method used by spring
Simon Glass
sjg at chromium.org
Mon Aug 3 16:19:24 CEST 2015
Add a driver to support the special LDO access used by spring. This is a
custom method in the cros_ec protocol - it does not use an I2C
pass-through.
There are two implementation choices:
1. Write a special LDO driver which can talk across the EC. Duplicate all
the logic from TPS65090 for retrying when the LDO fails to come up.
2. Write a special I2C bus driver which pretends to be a TPS65090 and
transfers reads and writes using the LDO message.
Either is distasteful. The latter method is chosen since it results in less
code duplication and a fairly simple (30-line) implementation of the core
logic.
The crosec 'ldo' subcommand could be removed (since i2c md/mw will work
instead) but is retained as a convenience.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
drivers/i2c/Kconfig | 13 ++++++++
drivers/i2c/Makefile | 1 +
drivers/i2c/cros_ec_ldo.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/misc/cros_ec.c | 21 +++++++------
include/cros_ec.h | 4 +--
5 files changed, 104 insertions(+), 12 deletions(-)
create mode 100644 drivers/i2c/cros_ec_ldo.c
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index e861b53..9a62ddd 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -29,6 +29,19 @@ config I2C_CROS_EC_TUNNEL
I2C or LPC). Some Chromebooks use this when the hardware design
does not allow direct access to the main PMIC from the AP.
+config I2C_CROS_EC_LDO
+ bool "Provide access to LDOs on the Chrome OS EC"
+ depends on CROS_EC
+ ---help---
+ On many Chromebooks the main PMIC is inaccessible to the AP. This is
+ often dealt with by using an I2C pass-through interface provided by
+ the EC. On some unfortunate models (e.g. Spring) the pass-through
+ is not available, and an LDO message is available instead. This
+ option enables a driver which provides very basic access to those
+ regulators, via the EC. We implement this as an I2C bus which
+ emulates just the TPS65090 messages we know about. This is done to
+ avoid duplicating the logic in the TPS65090 regulator driver for
+ enabling/disabling an LDO.
config DM_I2C_GPIO
bool "Enable Driver Model for software emulated I2C bus driver"
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 7f01fce..9b45248 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_DM_I2C) += i2c-uclass.o
obj-$(CONFIG_DM_I2C_COMPAT) += i2c-uclass-compat.o
obj-$(CONFIG_DM_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += cros_ec_tunnel.o
+obj-$(CONFIG_I2C_CROS_EC_LDO) += cros_ec_ldo.o
obj-$(CONFIG_SYS_I2C_ADI) += adi_i2c.o
obj-$(CONFIG_I2C_MV) += mv_i2c.o
diff --git a/drivers/i2c/cros_ec_ldo.c b/drivers/i2c/cros_ec_ldo.c
new file mode 100644
index 0000000..b817c61
--- /dev/null
+++ b/drivers/i2c/cros_ec_ldo.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Written by Simon Glass <sjg at chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <cros_ec.h>
+#include <errno.h>
+#include <i2c.h>
+#include <power/tps65090.h>
+
+static int cros_ec_ldo_set_bus_speed(struct udevice *dev, unsigned int speed)
+{
+ return 0;
+}
+
+static int cros_ec_ldo_xfer(struct udevice *dev, struct i2c_msg *msg,
+ int nmsgs)
+{
+ bool is_read = nmsgs > 1;
+ int fet_id, ret;
+
+ /*
+ * Look for reads and writes of the LDO registers. In either case the
+ * first message is a write with the register number as the first byte.
+ */
+ if (!nmsgs || !msg->len || (msg->flags & I2C_M_RD)) {
+ debug("%s: Invalid message\n", __func__);
+ goto err;
+ }
+
+ fet_id = msg->buf[0] - REG_FET_BASE;
+ if (fet_id < 1 || fet_id > MAX_FET_NUM) {
+ debug("%s: Invalid FET %d\n", __func__, fet_id);
+ goto err;
+ }
+
+ if (is_read) {
+ uint8_t state;
+
+ ret = cros_ec_get_ldo(dev->parent, fet_id, &state);
+ if (!ret)
+ msg[1].buf[0] = state ?
+ FET_CTRL_ENFET | FET_CTRL_PGFET : 0;
+ } else {
+ bool on = msg->buf[1] & FET_CTRL_ENFET;
+
+ ret = cros_ec_set_ldo(dev->parent, fet_id, on);
+ }
+
+ return ret;
+
+err:
+ /* Indicate that the message is unimplemented */
+ return -ENOSYS;
+}
+
+static const struct dm_i2c_ops cros_ec_i2c_ops = {
+ .xfer = cros_ec_ldo_xfer,
+ .set_bus_speed = cros_ec_ldo_set_bus_speed,
+};
+
+static const struct udevice_id cros_ec_i2c_ids[] = {
+ { .compatible = "google,cros-ec-ldo-tunnel" },
+ { }
+};
+
+U_BOOT_DRIVER(cros_ec_ldo) = {
+ .name = "cros_ec_ldo_tunnel",
+ .id = UCLASS_I2C,
+ .of_match = cros_ec_i2c_ids,
+ .per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
+ .ops = &cros_ec_i2c_ops,
+};
diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c
index ae52561..6027177 100644
--- a/drivers/misc/cros_ec.c
+++ b/drivers/misc/cros_ec.c
@@ -931,31 +931,32 @@ int cros_ec_write_vbnvcontext(struct cros_ec_dev *dev, const uint8_t *block)
return 0;
}
-int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state)
+int cros_ec_set_ldo(struct udevice *dev, uint8_t index, uint8_t state)
{
+ struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
struct ec_params_ldo_set params;
params.index = index;
params.state = state;
- if (ec_command_inptr(dev, EC_CMD_LDO_SET, 0,
- ¶ms, sizeof(params),
- NULL, 0))
+ if (ec_command_inptr(cdev, EC_CMD_LDO_SET, 0, ¶ms, sizeof(params),
+ NULL, 0))
return -1;
return 0;
}
-int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state)
+int cros_ec_get_ldo(struct udevice *dev, uint8_t index, uint8_t *state)
{
+ struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
struct ec_params_ldo_get params;
struct ec_response_ldo_get *resp;
params.index = index;
- if (ec_command_inptr(dev, EC_CMD_LDO_GET, 0,
- ¶ms, sizeof(params),
- (uint8_t **)&resp, sizeof(*resp)) != sizeof(*resp))
+ if (ec_command_inptr(cdev, EC_CMD_LDO_GET, 0, ¶ms, sizeof(params),
+ (uint8_t **)&resp, sizeof(*resp)) !=
+ sizeof(*resp))
return -1;
*state = resp->state;
@@ -1681,9 +1682,9 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
state = simple_strtoul(argv[3], &endp, 10);
if (*argv[3] == 0 || *endp != 0)
return CMD_RET_USAGE;
- ret = cros_ec_set_ldo(dev, index, state);
+ ret = cros_ec_set_ldo(udev, index, state);
} else {
- ret = cros_ec_get_ldo(dev, index, &state);
+ ret = cros_ec_get_ldo(udev, index, &state);
if (!ret) {
printf("LDO%d: %s\n", index,
state == EC_LDO_STATE_ON ?
diff --git a/include/cros_ec.h b/include/cros_ec.h
index 41951c3..0ad9d81 100644
--- a/include/cros_ec.h
+++ b/include/cros_ec.h
@@ -350,7 +350,7 @@ int cros_ec_read_build_info(struct cros_ec_dev *dev, char **strp);
* @param state new state of the LDO/FET : EC_LDO_STATE_ON|OFF
* @return 0 if ok, -1 on error
*/
-int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state);
+int cros_ec_set_ldo(struct udevice *dev, uint8_t index, uint8_t state);
/**
* Read back a LDO / FET current state.
@@ -360,7 +360,7 @@ int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state);
* @param state current state of the LDO/FET : EC_LDO_STATE_ON|OFF
* @return 0 if ok, -1 on error
*/
-int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state);
+int cros_ec_get_ldo(struct udevice *dev, uint8_t index, uint8_t *state);
/**
* Get access to the error reported when cros_ec_board_init() was called
--
2.5.0.rc2.392.g76e840b
More information about the U-Boot
mailing list