[U-Boot] [PATCH 1/2] add generic stubs for GPIO LEDs

[Bernhard Nortmann]

For boards that support LEDs driven via GPIO (CONFIG_GPIO_LED),
it may be useful to have some generic stubs (wrapper functions)
for the "colored" LEDs.

This allows defining STATUS_LED_* values directly to GPIO numbers,
e.g.: #define STATUS_LED_GREEN	248 /* = PH24 */

To keep those optional, it's probably best to introduce an additional
configuration setting. I've chosen CONFIG_GPIO_LED_STUBS for that.
Placing the code in drivers/misc/gpio_led.c also ensures that it
automatically depends on CONFIG_GPIO_LED too.

Signed-off-by: Bernhard Nortmann <bernhard.nortmann at web.de>
---

 drivers/misc/gpio_led.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/drivers/misc/gpio_led.c b/drivers/misc/gpio_led.c
index 3e95727..164c30d 100644
--- a/drivers/misc/gpio_led.c
+++ b/drivers/misc/gpio_led.c
@@ -51,3 +51,57 @@ void __led_toggle(led_id_t mask)
 {
 	gpio_set_value(mask, !gpio_get_value(mask));
 }
+
+#ifdef CONFIG_GPIO_LED_STUBS
+
+/* 'generic' override of colored LED stubs, to use GPIO functions instead */
+
+#ifdef STATUS_LED_RED
+void red_led_on(void)
+{
+	__led_set(STATUS_LED_RED, STATUS_LED_ON);
+}
+
+void red_led_off(void)
+{
+	__led_set(STATUS_LED_RED, STATUS_LED_OFF);
+}
+#endif
+
+#ifdef STATUS_LED_GREEN
+void green_led_on(void)
+{
+	__led_set(STATUS_LED_GREEN, STATUS_LED_ON);
+}
+
+void green_led_off(void)
+{
+	__led_set(STATUS_LED_GREEN, STATUS_LED_OFF);
+}
+#endif
+
+#ifdef STATUS_LED_YELLOW
+void yellow_led_on(void)
+{
+	__led_set(STATUS_LED_YELLOW, STATUS_LED_ON);
+}
+
+void yellow_led_off(void)
+{
+	__led_set(STATUS_LED_YELLOW, STATUS_LED_OFF);
+}
+#endif
+
+#ifdef STATUS_LED_BLUE
+void blue_led_on(void)
+{
+	__led_set(STATUS_LED_BLUE, STATUS_LED_ON);
+}
+
+void blue_led_off(void)
+{
+	__led_set(STATUS_LED_BLUE, STATUS_LED_OFF);
+}
+#endif
+
+#endif /* CONFIG_GPIO_LED_STUBS */
-- 
2.4.6