[U-Boot] [PATCH] sf: Remove #ifdef #endif in Makefile

[Jagan Teki]

Hi Bin,

On 1 December 2015 at 15:37, Bin Meng <bmeng.cn at gmail.com> wrote:
> The #ifdef #endif in drivers/mtd/spi/Makefile actually does nothing
> but causes confusion. Remove it.
>
> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
> ---
>
>  drivers/mtd/spi/Makefile | 2 --
>  1 file changed, 2 deletions(-)
>
> diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
> index cf4e7e1..6ca1b72 100644
> --- a/drivers/mtd/spi/Makefile
> +++ b/drivers/mtd/spi/Makefile
> @@ -12,9 +12,7 @@ obj-$(CONFIG_SPL_SPI_LOAD)    += spi_spl_load.o
>  obj-$(CONFIG_SPL_SPI_BOOT)     += fsl_espi_spl.o
>  endif
>
> -#ifndef CONFIG_DM_SPI
>  obj-$(CONFIG_SPI_FLASH) += sf_probe.o
> -#endif
>  obj-$(CONFIG_CMD_SF) += sf.o
>  obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o
>  obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o

Sent similar change on this [1] patch

[1] https://patchwork.ozlabs.org/patch/549041/

thanks!
-- 
Jagan .