[U-Boot] [PATCH] sf: Remove #ifdef #endif in Makefile

[Bin Meng]

Hi Jagan,

On Thu, Dec 3, 2015 at 6:17 PM, Jagan Teki <jteki at openedev.com> wrote:
> Hi Bin,
>
> On 1 December 2015 at 15:37, Bin Meng <bmeng.cn at gmail.com> wrote:
>> The #ifdef #endif in drivers/mtd/spi/Makefile actually does nothing
>> but causes confusion. Remove it.
>>
>> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
>> ---
>>
>>  drivers/mtd/spi/Makefile | 2 --
>>  1 file changed, 2 deletions(-)
>>
>> diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
>> index cf4e7e1..6ca1b72 100644
>> --- a/drivers/mtd/spi/Makefile
>> +++ b/drivers/mtd/spi/Makefile
>> @@ -12,9 +12,7 @@ obj-$(CONFIG_SPL_SPI_LOAD)    += spi_spl_load.o
>>  obj-$(CONFIG_SPL_SPI_BOOT)     += fsl_espi_spl.o
>>  endif
>>
>> -#ifndef CONFIG_DM_SPI
>>  obj-$(CONFIG_SPI_FLASH) += sf_probe.o
>> -#endif
>>  obj-$(CONFIG_CMD_SF) += sf.o
>>  obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o
>>  obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o
>
> Sent similar change on this [1] patch
>
> [1] https://patchwork.ozlabs.org/patch/549041/
>

Ah, yes! Thanks.

> thanks!
> --

Regards,
Bin