[U-Boot] [PATCHv4 4/9] arm: socfpga: arria10: add misc functions for Arria10

[Dinh Nguyen]

On 12/02/2015 08:47 PM, Marek Vasut wrote:
> On Wednesday, December 02, 2015 at 08:31:28 PM, dinguyen at opensource.altera.com 
> wrote:
>> From: Dinh Nguyen <dinh.linux at gmail.com>
>>
>> Add arch_early_init_r function. The Arria10 has a firewall protection
>> around the SDRAM and OCRAM. These firewalls are to be disabled in order
>> for U-Boot to function.
>>
>> Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
>> ---
>> v4: be consistent and use #if->else throughout
>> v3:
>> s/reset_assert_all_peripherals_except_l4wd0_l4timer0/socfpga_per_reset_all
>> use CONFIG_SOCFPGA_GEN5
>> v2: reuse misc functions from a5/c5
>> ---
>>  arch/arm/mach-socfpga/misc.c | 51
>> ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51
>> insertions(+)
>>
>> diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
>> index b110f5b..78774d5 100644
>> --- a/arch/arm/mach-socfpga/misc.c
>> +++ b/arch/arm/mach-socfpga/misc.c
>> @@ -15,6 +15,7 @@
>>  #include <watchdog.h>
>>  #include <asm/arch/reset_manager.h>
>>  #include <asm/arch/scan_manager.h>
>> +#include <asm/arch/sdram_a10.h>
>>  #include <asm/arch/system_manager.h>
>>  #include <asm/arch/dwmmc.h>
>>  #include <asm/arch/nic301.h>
>> @@ -31,8 +32,15 @@ static struct socfpga_system_manager *sysmgr_regs =
>>  	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
>>  static struct socfpga_reset_manager *reset_manager_base =
>>  	(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
>> +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>>  static struct nic301_registers *nic301_regs =
>>  	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
>> +#else
>> +static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base =
>> +	(void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS;
>> +static const struct socfpga_noc_fw_ddr_l3 *noc_fw_ddr_l3_base =
>> +	(void *)SOCFPGA_SDR_FIREWALL_L3_ADDRESS;
>> +#endif
>>  static struct scu_registers *scu_regs =
>>  	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
>>
>> @@ -207,9 +215,14 @@ static int socfpga_fpga_id(const bool print_id)
>>  #if defined(CONFIG_DISPLAY_CPUINFO)
>>  int print_cpuinfo(void)
>>  {
>> +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>>  	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
>>  	puts("CPU:   Altera SoCFPGA Platform\n");
>>  	socfpga_fpga_id(1);
>> +#else
>> +	const u32 bsel = (readl(&sysmgr_regs->bootinfo) >> 12) & 0x7;
> 
> Is the bsel meaning the same for both Gen5 and Gen10 ? If so, that's fine.
> You can improve this code here by defining some bootinfo offset, 0 for gen5
> and 12 for gen10 and then you'd only need to ifdef the puts() and the invocation
> of socfpga_fpga_id();
> 
> Can you send a subsequent patch for this ?
> 

Yes, the bsel meaning is the same for Gen5 and Gen10. I'll send a follow
up patch with Pavel's comment taken into consideration.

Dinh