[U-Boot] [RFC PATCH 00/11] Add support for 96boards Dragonboard410C board

[sk.syed2]

>
> With a slight delay (Sorry Syed) I'm finally ready to show code
> I've been working recently on.

Thanks for the patches. I will update my git tree for snapdragon_810
with these changes. I only have serial and cache support working on 810
and it boots to u-boot prompt. The
arch/arm/cpu/armv8/cache_v8.c/mmu_setup() causes the board to reset. I
didn't dig deeper. I switched to use
mmu_setup() as implemented in arch/arm/cpu/armv8/zynqmp/cpu.c and
everything works fine.

>create mode 100644 arch/arm/mach-snapdragon/reset.c
Can you rename this  arch/arm/mach-snapdragon/reset-apq8016.c as I
have arch/arm/mach-snapdragon/reset-apq8094.c to be added.

Will provide more feedback going forward.

Thanks
-syed