[U-Boot] [PATCH v2 05/14] net: emaclite: Use indirect register access for rx_ping/pong

[Michal Simek]

Do initialization via indirect register access.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

Changes in v2:
- Fix subject to point to rx instead of tx

 drivers/net/xilinx_emaclite.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 654ad58cea3c..724b61e0b7e1 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -364,11 +364,10 @@ static int emaclite_init(struct eth_device *dev, bd_t *bis)
  * RX - RX_PING & RX_PONG initialization
  */
 	/* Write out the value to flush the RX buffer */
-	out_be32 (dev->iobase + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
+	out_be32(&regs->rx_ping_rsr, XEL_RSR_RECV_IE_MASK);
 
 	if (emaclite->rxpp)
-		out_be32 (dev->iobase + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
-			XEL_RSR_RECV_IE_MASK);
+		out_be32(&regs->rx_pong_rsr, XEL_RSR_RECV_IE_MASK);
 
 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
 	out_be32(&regs->mdioctrl, XEL_MDIOCTRL_MDIOEN_MASK);
-- 
1.9.1