[U-Boot] [PATCH v4 6/8] mips: ath79: add AP121 reference board
Wills Wang
wills.wang at live.com
Sat Dec 26 17:59:08 CET 2015
On 12/26/2015 09:52 PM, Daniel Schwierzeck wrote:
>
> Am 25.12.2015 um 19:56 schrieb Wills Wang:
>> Signed-off-by: Wills Wang <wills.wang at live.com>
>> ---
>>
>> Changes in v4: None
>> Changes in v3: None
>> Changes in v2: None
>>
>> arch/mips/Kconfig | 8 +++++
>> arch/mips/dts/Makefile | 2 +-
>> arch/mips/dts/ap121.dts | 37 +++++++++++++++++++
>> arch/mips/dts/ar933x.dtsi | 64 +++++++++++++++++++++++++++++++++
>> board/ath79/ap121/Kconfig | 15 ++++++++
>> board/ath79/ap121/MAINTAINERS | 6 ++++
>> board/ath79/ap121/Makefile | 8 +++++
>> board/ath79/ap121/README | 18 ++++++++++
>> board/ath79/ap121/ap121.c | 17 +++++++++
>> board/ath79/ap121/config.mk | 16 +++++++++
>> configs/ap121_defconfig | 42 ++++++++++++++++++++++
>> include/configs/ap121.h | 82 +++++++++++++++++++++++++++++++++++++++++++
>> 12 files changed, 314 insertions(+), 1 deletion(-)
>> create mode 100644 arch/mips/dts/ap121.dts
>> create mode 100644 arch/mips/dts/ar933x.dtsi
>> create mode 100644 board/ath79/ap121/Kconfig
>> create mode 100644 board/ath79/ap121/MAINTAINERS
>> create mode 100644 board/ath79/ap121/Makefile
>> create mode 100644 board/ath79/ap121/README
>> create mode 100644 board/ath79/ap121/ap121.c
>> create mode 100644 board/ath79/ap121/config.mk
>> create mode 100644 configs/ap121_defconfig
>> create mode 100644 include/configs/ap121.h
>>
>> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
>> index 7f7e258..09b8709 100644
>> --- a/arch/mips/Kconfig
>> +++ b/arch/mips/Kconfig
>> @@ -51,6 +51,13 @@ config TARGET_PB1X00
>> select SUPPORTS_CPU_MIPS32_R2
>> select SYS_MIPS_CACHE_INIT_RAM_LOAD
>>
>> +config TARGET_AP121
>> + bool "Support ap121"
>> + select SUPPORTS_BIG_ENDIAN
>> + select SUPPORTS_CPU_MIPS32_R1
>> + select SUPPORTS_CPU_MIPS32_R2
>> + select SYS_MIPS_CACHE_INIT_RAM_LOAD
>> +
> please create a dedicated Kconfig in arch/mips/mach-ath79/ and add this
> board there. Have a look at following links for examples:
>
> https://github.com/danielschwierzeck/u-boot-lantiq/blob/lantiq/upstream/arch/mips/mach-lantiq/Kconfig
>
> http://patchwork.ozlabs.org/patch/558465/
> http://patchwork.ozlabs.org/patch/558469/
Ok.
>>
>> endchoice
>>
>> @@ -59,6 +66,7 @@ source "board/imgtec/malta/Kconfig"
>> source "board/micronas/vct/Kconfig"
>> source "board/pb1x00/Kconfig"
>> source "board/qemu-mips/Kconfig"
>> +source "board/ath79/ap121/Kconfig"
>>
>> if MIPS
>>
>> diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
>> index 47b6eb5..6f8b413 100644
>> --- a/arch/mips/dts/Makefile
>> +++ b/arch/mips/dts/Makefile
>> @@ -2,7 +2,7 @@
>> # SPDX-License-Identifier: GPL-2.0+
>> #
>>
>> -dtb-y +=
>> +dtb-$(CONFIG_TARGET_AP121) += ap121.dtb
>>
>> targets += $(dtb-y)
>>
>> diff --git a/arch/mips/dts/ap121.dts b/arch/mips/dts/ap121.dts
>> new file mode 100644
>> index 0000000..769458a
>> --- /dev/null
>> +++ b/arch/mips/dts/ap121.dts
>> @@ -0,0 +1,37 @@
>> +/dts-v1/;
>> +#include "ar933x.dtsi"
>> +
>> +/ {
>> + model = "AP121 Reference Board";
>> + compatible = "ath79,ap121", "ath79,ar933x";
>> +
>> + aliases {
>> + spi0 = &spi0;
>> + serial0 = &uart0;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +};
>> +
>> +&xtal {
>> + clock-frequency = <25000000>;
>> +};
>> +
>> +&uart0 {
>> + status = "okay";
>> +};
>> +
>> +&spi0 {
>> + spi-max-frequency = <25000000>;
>> + status = "okay";
>> + spi-flash at 0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "spi-flash";
>> + memory-map = <0x9f000000 0x00800000>;
>> + spi-max-frequency = <25000000>;
>> + reg = <0>;
>> + };
>> +};
>> diff --git a/arch/mips/dts/ar933x.dtsi b/arch/mips/dts/ar933x.dtsi
>> new file mode 100644
>> index 0000000..64b30f7
>> --- /dev/null
>> +++ b/arch/mips/dts/ar933x.dtsi
>> @@ -0,0 +1,64 @@
>> +#include "skeleton.dtsi"
>> +
>> +/ {
>> + compatible = "ath79,ar933x";
> the first part should be a vendor name and according to device-trees
> from kernel this should be "qca"
Ok.
>> +
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + cpu at 0 {
>> + device_type = "cpu";
>> + compatible = "mips,mips24Kc";
>> + reg = <0>;
>> + };
>> + };
>> +
>> + clocks {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + xtal: xtal {
>> + #clock-cells = <0>;
>> + compatible = "fixed-clock";
>> + clock-output-names = "xtal";
>> + };
>> + };
>> +
>> + ahb {
>> + compatible = "simple-bus";
>> + ranges;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + apb {
>> + compatible = "simple-bus";
>> + ranges;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + uart0: uart at 18020000 {
>> + compatible = "ath79,ar933x-uart";
> I suggest to use "qca,ar9330-uart" like the kernel driver
>
Ok.
>> + reg = <0x18020000 0x20>;
>> +
>> + status = "disabled";
>> + };
>> + };
>> +
>> + spi0: spi at 1f000000 {
>> + compatible = "ath79,ath79-spi";
> I suggest to use "qca,ar7100-spi" like the kernel driver
Ok.
>> + reg = <0x1f000000 0x10>;
>> +
>> + status = "disabled";
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + };
>> + };
>> +};
>> diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
>> new file mode 100644
>> index 0000000..88d9eff
>> --- /dev/null
>> +++ b/board/ath79/ap121/Kconfig
>> @@ -0,0 +1,15 @@
>> +if TARGET_AP121
>> +
>> +config SYS_BOARD
>> + default "ap121"
>> +
>> +config SYS_VENDOR
>> + default "ath79"
>> +
>> +config SYS_SOC
>> + default "ath79"
>> +
>> +config SYS_CONFIG_NAME
>> + default "ap121"
>> +
>> +endif
>> diff --git a/board/ath79/ap121/MAINTAINERS b/board/ath79/ap121/MAINTAINERS
>> new file mode 100644
>> index 0000000..319b521
>> --- /dev/null
>> +++ b/board/ath79/ap121/MAINTAINERS
>> @@ -0,0 +1,6 @@
>> +AP121 BOARD
>> +M: Wills Wang <wills.wang at live.com>
>> +S: Maintained
>> +F: board/ath79/ap121/
>> +F: include/configs/ap121.h
>> +F: configs/ap121_defconfig
>> diff --git a/board/ath79/ap121/Makefile b/board/ath79/ap121/Makefile
>> new file mode 100644
>> index 0000000..9132118
>> --- /dev/null
>> +++ b/board/ath79/ap121/Makefile
>> @@ -0,0 +1,8 @@
>> +#
>> +# (C) Copyright 2003-2006
>> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> again, no historic copyright needed for a simple one-line Makefile
Ok.
>> +#
>> +# SPDX-License-Identifier: GPL-2.0+
>> +#
>> +
>> +obj-y = ap121.o
>> diff --git a/board/ath79/ap121/README b/board/ath79/ap121/README
>> new file mode 100644
>> index 0000000..104850f
>> --- /dev/null
>> +++ b/board/ath79/ap121/README
>> @@ -0,0 +1,18 @@
>> +ATHEROS AP121
>> +==================
>> +
>> +Supported hardware: AP121 referance board.
>> +
>> +Files of the AP121 port
>> +--------------------------
>> +
>> +arch/mips/mach-ath79/ar933x/ - The CPU support code for the Atheros ar933x
>> +arch/mips/include/asm/arch-ath79 - Header files for the Atheros ath79
>> +board/ath79/ap121/ - AP121 board specific files
>> +include/configs/ap121.h - AP121 configuration file
>> +
>> +Configure
>> +-------------------
>> +
>> +To configure for the current board
>> + make ap121_defconfig
> you can drop this README. There is no new or relevant information in it
>
Ok.
>> diff --git a/board/ath79/ap121/ap121.c b/board/ath79/ap121/ap121.c
>> new file mode 100644
>> index 0000000..f60f88b
>> --- /dev/null
>> +++ b/board/ath79/ap121/ap121.c
>> @@ -0,0 +1,17 @@
>> +/*
>> + * (C) Copyright 2015
>> + * Wills Wang, <wills.wang at live.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +#include <command.h>
>> +#include <asm/mipsregs.h>
>> +#include <asm/addrspace.h>
>> +#include <asm/io.h>
>> +
>> +int checkboard(void)
>> +{
>> + return 0;
>> +}
> you could/should print your board name here
U-boot print the board model property from device tree when power up,
I think it's duplicated.
>> diff --git a/board/ath79/ap121/config.mk b/board/ath79/ap121/config.mk
>> new file mode 100644
>> index 0000000..f7dd3b7
>> --- /dev/null
>> +++ b/board/ath79/ap121/config.mk
>> @@ -0,0 +1,16 @@
>> +#
>> +# (C) Copyright 2003
>> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
>> +#
>> +# SPDX-License-Identifier: GPL-2.0+
>> +#
>> +
>> +#
>> +# AP121 referance board, MIPS32 core
>> +#
>> +
>> +# ROM version
>> +CONFIG_SYS_TEXT_BASE = 0x9f000000
>> +
>> +# RAM version
>> +#CONFIG_SYS_TEXT_BASE = 0x80010000
> config.mk files in board directory are also deprecated. Please add
> "#define CONFIG_SYS_TEXT_BASE 0x9f000000" to include/configs/ap121.h
Ok.
>> diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig
>> new file mode 100644
>> index 0000000..cec0bb7
>> --- /dev/null
>> +++ b/configs/ap121_defconfig
>> @@ -0,0 +1,42 @@
>> +CONFIG_MIPS=y
>> +CONFIG_TARGET_AP121=y
>> +CONFIG_SYS_MALLOC_F_LEN=0x2000
>> +CONFIG_SYS_PROMPT="ap121 # "
>> +CONFIG_OF_CONTROL=y
>> +CONFIG_DEFAULT_DEVICE_TREE="ap121"
>> +CONFIG_DM=y
> options like CONFIG_OF_CONTROL and CONFIG_DM should be pre-selected by
> the mach or SoC specific Kconfig file if you always require it. An user
> of your board should not be able to disable those options.
>
Ok.
>> +CONFIG_DM_SERIAL=y
>> +CONFIG_DM_SPI=y
>> +CONFIG_DM_SPI_FLASH=y
>> +CONFIG_ATH79_SPI=y
>> +CONFIG_SPI_FLASH=y
>> +CONFIG_SPI_FLASH_BAR=y
>> +CONFIG_SPI_FLASH_ATMEL=y
>> +CONFIG_SPI_FLASH_EON=y
>> +CONFIG_SPI_FLASH_GIGADEVICE=y
>> +CONFIG_SPI_FLASH_MACRONIX=y
>> +CONFIG_SPI_FLASH_SPANSION=y
>> +CONFIG_SPI_FLASH_STMICRO=y
>> +CONFIG_SPI_FLASH_SST=y
>> +CONFIG_SPI_FLASH_WINBOND=y
>> +CONFIG_SPI_FLASH_USE_4K_SECTORS=y
>> +CONFIG_SPI_FLASH_DATAFLASH=y
>> +CONFIG_SPI_FLASH_MTD=y
>> +CONFIG_CMD_DM=y
>> +CONFIG_CMD_SF=y
>> +CONFIG_CMD_SPI=y
>> +# CONFIG_NET is not set
>> +# CONFIG_CMD_BDI is not set
>> +# CONFIG_CMD_CONSOLE is not set
>> +# CONFIG_CMD_IMLS is not set
>> +# CONFIG_CMD_XIMG is not set
>> +# CONFIG_CMD_ELF is not set
>> +# CONFIG_CMD_EXPORTENV is not set
>> +# CONFIG_CMD_IMPORTENV is not set
>> +# CONFIG_CMD_EDITENV is not set
>> +# CONFIG_CMD_CRC32 is not set
>> +# CONFIG_CMD_FLASH is not set
>> +# CONFIG_CMD_FPGA is not set
>> +# CONFIG_CMD_NFS is not set
>> +# CONFIG_CMD_NET is not set
>> +CONFIG_USE_PRIVATE_LIBGCC=y
>> diff --git a/include/configs/ap121.h b/include/configs/ap121.h
>> new file mode 100644
>> index 0000000..5a01d11
>> --- /dev/null
>> +++ b/include/configs/ap121.h
>> @@ -0,0 +1,82 @@
>> +#ifndef __CONFIG_H
>> +#define __CONFIG_H
>> +
>> +#include <linux/kconfig.h>
>> +#include <linux/sizes.h>
> those includes are not needed in a board config header file respectively
> they are already included implicitely
Ok.
>> +
>> +#define CONFIG_ARCH_ATH79
>> +#define CONFIG_SOC_AR933X
> this is already configured by Kconfig
>
Ok.
>> +
>> +#define CONFIG_DISPLAY_CPUINFO
>> +#define CONFIG_DISPLAY_BOARDINFO
>> +
>> +#define CONFIG_OF_LIBFDT
>> +
>> +#define CONFIG_SYS_HZ 1000
>> +#define CONFIG_SYS_MHZ 200
>> +#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
>> +
>> +/* Cache Configuration */
>> +#define CONFIG_SYS_DCACHE_SIZE 32 * SZ_1K
>> +#define CONFIG_SYS_ICACHE_SIZE 64 * SZ_1K
>> +#define CONFIG_SYS_CACHELINE_SIZE 32
> you can drop this, the cache sizes will be detected automatically
I have a try later, i will drop this if it work fine.
>> +
>> +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
>> +
>> +#define CONFIG_SYS_MALLOC_LEN ROUND(0x30000 + 128 * SZ_1K, 0x1000)
> no need for a magic calculation, please choose a fixed value
Ok.
>> +
>> +#define CONFIG_SYS_BOOTPARAMS_LEN 128 * SZ_1K
>> +
>> +#define CONFIG_SYS_SDRAM_BASE 0x80000000
>> +#define CONFIG_SYS_LOAD_ADDR 0x81000000
>> +
>> +#define CONFIG_SYS_INIT_SP_OFFSET 0x20000
>> +#define CONFIG_SYS_NO_FLASH
>> +
>> +#define CONFIG_AR933X_SERIAL
> this is already configured by Kconfig
Ok.
>> +#define CONFIG_BAUDRATE 115200
>> +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
>> +
>> +#define CONFIG_BOOTDELAY 3
>> +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
>> + "root=/dev/mtdblock2 " \
>> + "rootfstype=squashfs"
>> +#define CONFIG_BOOTCOMMAND "sf probe;" \
>> + "mtdparts default;" \
>> + "bootm 0x9f300000"
>> +#define CONFIG_LZMA
>> +
>> +#define MTDIDS_DEFAULT "nor0=spi-flash.0"
>> +#define MTDPARTS_DEFAULT "mtdparts=spi-flash.0:256k(u-boot)," \
>> + "64k(u-boot-env),2752k(rootfs),896k(uImage),64k(NVRAM),64k(ART)"
>> +
>> +#define CONFIG_ENV_SPI_MAX_HZ 25000000
>> +#define CONFIG_ENV_IS_IN_SPI_FLASH
>> +#define CONFIG_ENV_OFFSET (256 * SZ_1K)
>> +#define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
>> +#define CONFIG_ENV_SIZE (64 * SZ_1K)
>> +
>> +/*
>> + * Command
>> + */
>> +#define CONFIG_CMD_MTDPARTS
>> +
>> +/* Miscellaneous configurable options */
>> +#define CONFIG_SYS_CBSIZE 256
>> +#define CONFIG_SYS_MAXARGS 16
>> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
>> + sizeof(CONFIG_SYS_PROMPT) + 16)
>> +#define CONFIG_SYS_LONGHELP
>> +#define CONFIG_CMDLINE_EDITING
>> +#define CONFIG_AUTO_COMPLETE
>> +#define CONFIG_SYS_HUSH_PARSER
>> +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
> this is already configured by Kconfig
Ok.
>> +
>> +/*
>> + * Diagnostics
>> + */
>> +#define CONFIG_SYS_MEMTEST_START 0x80100000
>> +#define CONFIG_SYS_MEMTEST_END 0x83f00000
>> +#define CONFIG_CMD_MEMTEST
>> +
>> +#endif /* __CONFIG_H */
>>
More information about the U-Boot
mailing list