[U-Boot] [PATCH v4 6/8] mips: ath79: add AP121 reference board
Daniel Schwierzeck
daniel.schwierzeck at gmail.com
Sat Dec 26 18:07:25 CET 2015
Am 26.12.2015 um 17:59 schrieb Wills Wang:
>
>
> On 12/26/2015 09:52 PM, Daniel Schwierzeck wrote:
>>
>> Am 25.12.2015 um 19:56 schrieb Wills Wang:
>>> Signed-off-by: Wills Wang <wills.wang at live.com>
>>> ---
>>>
>>> Changes in v4: None
>>> Changes in v3: None
>>> Changes in v2: None
>>>
>>> arch/mips/Kconfig | 8 +++++
>>> arch/mips/dts/Makefile | 2 +-
>>> arch/mips/dts/ap121.dts | 37 +++++++++++++++++++
>>> arch/mips/dts/ar933x.dtsi | 64 +++++++++++++++++++++++++++++++++
>>> board/ath79/ap121/Kconfig | 15 ++++++++
>>> board/ath79/ap121/MAINTAINERS | 6 ++++
>>> board/ath79/ap121/Makefile | 8 +++++
>>> board/ath79/ap121/README | 18 ++++++++++
>>> board/ath79/ap121/ap121.c | 17 +++++++++
>>> board/ath79/ap121/config.mk | 16 +++++++++
>>> configs/ap121_defconfig | 42 ++++++++++++++++++++++
>>> include/configs/ap121.h | 82
>>> +++++++++++++++++++++++++++++++++++++++++++
>>> 12 files changed, 314 insertions(+), 1 deletion(-)
>>> create mode 100644 arch/mips/dts/ap121.dts
>>> create mode 100644 arch/mips/dts/ar933x.dtsi
>>> create mode 100644 board/ath79/ap121/Kconfig
>>> create mode 100644 board/ath79/ap121/MAINTAINERS
>>> create mode 100644 board/ath79/ap121/Makefile
>>> create mode 100644 board/ath79/ap121/README
>>> create mode 100644 board/ath79/ap121/ap121.c
>>> create mode 100644 board/ath79/ap121/config.mk
>>> create mode 100644 configs/ap121_defconfig
>>> create mode 100644 include/configs/ap121.h
>>>
>>> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
>>> index 7f7e258..09b8709 100644
>>> --- a/arch/mips/Kconfig
>>> +++ b/arch/mips/Kconfig
>>> @@ -51,6 +51,13 @@ config TARGET_PB1X00
>>> select SUPPORTS_CPU_MIPS32_R2
>>> select SYS_MIPS_CACHE_INIT_RAM_LOAD
>>> +config TARGET_AP121
>>> + bool "Support ap121"
>>> + select SUPPORTS_BIG_ENDIAN
>>> + select SUPPORTS_CPU_MIPS32_R1
>>> + select SUPPORTS_CPU_MIPS32_R2
>>> + select SYS_MIPS_CACHE_INIT_RAM_LOAD
>>> +
>> please create a dedicated Kconfig in arch/mips/mach-ath79/ and add this
>> board there. Have a look at following links for examples:
>>
>> https://github.com/danielschwierzeck/u-boot-lantiq/blob/lantiq/upstream/arch/mips/mach-lantiq/Kconfig
>>
>>
>> http://patchwork.ozlabs.org/patch/558465/
>> http://patchwork.ozlabs.org/patch/558469/
> Ok.
>>> endchoice
>>> @@ -59,6 +66,7 @@ source "board/imgtec/malta/Kconfig"
>>> source "board/micronas/vct/Kconfig"
>>> source "board/pb1x00/Kconfig"
>>> source "board/qemu-mips/Kconfig"
>>> +source "board/ath79/ap121/Kconfig"
>>> if MIPS
>>> diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
>>> index 47b6eb5..6f8b413 100644
>>> --- a/arch/mips/dts/Makefile
>>> +++ b/arch/mips/dts/Makefile
>>> @@ -2,7 +2,7 @@
>>> # SPDX-License-Identifier: GPL-2.0+
>>> #
>>> -dtb-y +=
>>> +dtb-$(CONFIG_TARGET_AP121) += ap121.dtb
>>> targets += $(dtb-y)
>>> diff --git a/arch/mips/dts/ap121.dts b/arch/mips/dts/ap121.dts
>>> new file mode 100644
>>> index 0000000..769458a
>>> --- /dev/null
>>> +++ b/arch/mips/dts/ap121.dts
>>> @@ -0,0 +1,37 @@
>>> +/dts-v1/;
>>> +#include "ar933x.dtsi"
>>> +
>>> +/ {
>>> + model = "AP121 Reference Board";
>>> + compatible = "ath79,ap121", "ath79,ar933x";
>>> +
>>> + aliases {
>>> + spi0 = &spi0;
>>> + serial0 = &uart0;
>>> + };
>>> +
>>> + chosen {
>>> + stdout-path = "serial0:115200n8";
>>> + };
>>> +};
>>> +
>>> +&xtal {
>>> + clock-frequency = <25000000>;
>>> +};
>>> +
>>> +&uart0 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&spi0 {
>>> + spi-max-frequency = <25000000>;
>>> + status = "okay";
>>> + spi-flash at 0 {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + compatible = "spi-flash";
>>> + memory-map = <0x9f000000 0x00800000>;
>>> + spi-max-frequency = <25000000>;
>>> + reg = <0>;
>>> + };
>>> +};
>>> diff --git a/arch/mips/dts/ar933x.dtsi b/arch/mips/dts/ar933x.dtsi
>>> new file mode 100644
>>> index 0000000..64b30f7
>>> --- /dev/null
>>> +++ b/arch/mips/dts/ar933x.dtsi
>>> @@ -0,0 +1,64 @@
>>> +#include "skeleton.dtsi"
>>> +
>>> +/ {
>>> + compatible = "ath79,ar933x";
>> the first part should be a vendor name and according to device-trees
>> from kernel this should be "qca"
> Ok.
>>> +
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> +
>>> + cpus {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + cpu at 0 {
>>> + device_type = "cpu";
>>> + compatible = "mips,mips24Kc";
>>> + reg = <0>;
>>> + };
>>> + };
>>> +
>>> + clocks {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges;
>>> +
>>> + xtal: xtal {
>>> + #clock-cells = <0>;
>>> + compatible = "fixed-clock";
>>> + clock-output-names = "xtal";
>>> + };
>>> + };
>>> +
>>> + ahb {
>>> + compatible = "simple-bus";
>>> + ranges;
>>> +
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> +
>>> + apb {
>>> + compatible = "simple-bus";
>>> + ranges;
>>> +
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> +
>>> + uart0: uart at 18020000 {
>>> + compatible = "ath79,ar933x-uart";
>> I suggest to use "qca,ar9330-uart" like the kernel driver
>>
> Ok.
>>> + reg = <0x18020000 0x20>;
>>> +
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + spi0: spi at 1f000000 {
>>> + compatible = "ath79,ath79-spi";
>> I suggest to use "qca,ar7100-spi" like the kernel driver
> Ok.
>>> + reg = <0x1f000000 0x10>;
>>> +
>>> + status = "disabled";
>>> +
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + };
>>> + };
>>> +};
>>> diff --git a/board/ath79/ap121/Kconfig b/board/ath79/ap121/Kconfig
>>> new file mode 100644
>>> index 0000000..88d9eff
>>> --- /dev/null
>>> +++ b/board/ath79/ap121/Kconfig
>>> @@ -0,0 +1,15 @@
>>> +if TARGET_AP121
>>> +
>>> +config SYS_BOARD
>>> + default "ap121"
>>> +
>>> +config SYS_VENDOR
>>> + default "ath79"
>>> +
>>> +config SYS_SOC
>>> + default "ath79"
>>> +
>>> +config SYS_CONFIG_NAME
>>> + default "ap121"
>>> +
>>> +endif
>>> diff --git a/board/ath79/ap121/MAINTAINERS
>>> b/board/ath79/ap121/MAINTAINERS
>>> new file mode 100644
>>> index 0000000..319b521
>>> --- /dev/null
>>> +++ b/board/ath79/ap121/MAINTAINERS
>>> @@ -0,0 +1,6 @@
>>> +AP121 BOARD
>>> +M: Wills Wang <wills.wang at live.com>
>>> +S: Maintained
>>> +F: board/ath79/ap121/
>>> +F: include/configs/ap121.h
>>> +F: configs/ap121_defconfig
>>> diff --git a/board/ath79/ap121/Makefile b/board/ath79/ap121/Makefile
>>> new file mode 100644
>>> index 0000000..9132118
>>> --- /dev/null
>>> +++ b/board/ath79/ap121/Makefile
>>> @@ -0,0 +1,8 @@
>>> +#
>>> +# (C) Copyright 2003-2006
>>> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
>> again, no historic copyright needed for a simple one-line Makefile
> Ok.
>>> +#
>>> +# SPDX-License-Identifier: GPL-2.0+
>>> +#
>>> +
>>> +obj-y = ap121.o
>>> diff --git a/board/ath79/ap121/README b/board/ath79/ap121/README
>>> new file mode 100644
>>> index 0000000..104850f
>>> --- /dev/null
>>> +++ b/board/ath79/ap121/README
>>> @@ -0,0 +1,18 @@
>>> +ATHEROS AP121
>>> +==================
>>> +
>>> +Supported hardware: AP121 referance board.
>>> +
>>> +Files of the AP121 port
>>> +--------------------------
>>> +
>>> +arch/mips/mach-ath79/ar933x/ - The CPU support code for the
>>> Atheros ar933x
>>> +arch/mips/include/asm/arch-ath79 - Header files for the Atheros
>>> ath79
>>> +board/ath79/ap121/ - AP121 board specific files
>>> +include/configs/ap121.h - AP121 configuration file
>>> +
>>> +Configure
>>> +-------------------
>>> +
>>> +To configure for the current board
>>> + make ap121_defconfig
>> you can drop this README. There is no new or relevant information in it
>>
> Ok.
>>> diff --git a/board/ath79/ap121/ap121.c b/board/ath79/ap121/ap121.c
>>> new file mode 100644
>>> index 0000000..f60f88b
>>> --- /dev/null
>>> +++ b/board/ath79/ap121/ap121.c
>>> @@ -0,0 +1,17 @@
>>> +/*
>>> + * (C) Copyright 2015
>>> + * Wills Wang, <wills.wang at live.com>
>>> + *
>>> + * SPDX-License-Identifier: GPL-2.0+
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <command.h>
>>> +#include <asm/mipsregs.h>
>>> +#include <asm/addrspace.h>
>>> +#include <asm/io.h>
>>> +
>>> +int checkboard(void)
>>> +{
>>> + return 0;
>>> +}
>> you could/should print your board name here
> U-boot print the board model property from device tree when power up,
> I think it's duplicated.
yes, you are right. But checkboard is already implemented in
common/board_info.c as empty and weak function. Thus you can drop your
implementation.
>>> diff --git a/board/ath79/ap121/config.mk b/board/ath79/ap121/config.mk
>>> new file mode 100644
>>> index 0000000..f7dd3b7
>>> --- /dev/null
>>> +++ b/board/ath79/ap121/config.mk
>>> @@ -0,0 +1,16 @@
>>> +#
>>> +# (C) Copyright 2003
>>> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
>>> +#
>>> +# SPDX-License-Identifier: GPL-2.0+
>>> +#
>>> +
>>> +#
>>> +# AP121 referance board, MIPS32 core
>>> +#
>>> +
>>> +# ROM version
>>> +CONFIG_SYS_TEXT_BASE = 0x9f000000
>>> +
>>> +# RAM version
>>> +#CONFIG_SYS_TEXT_BASE = 0x80010000
>> config.mk files in board directory are also deprecated. Please add
>> "#define CONFIG_SYS_TEXT_BASE 0x9f000000" to include/configs/ap121.h
> Ok.
>>> diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig
>>> new file mode 100644
>>> index 0000000..cec0bb7
>>> --- /dev/null
>>> +++ b/configs/ap121_defconfig
>>> @@ -0,0 +1,42 @@
>>> +CONFIG_MIPS=y
>>> +CONFIG_TARGET_AP121=y
>>> +CONFIG_SYS_MALLOC_F_LEN=0x2000
>>> +CONFIG_SYS_PROMPT="ap121 # "
>>> +CONFIG_OF_CONTROL=y
>>> +CONFIG_DEFAULT_DEVICE_TREE="ap121"
>>> +CONFIG_DM=y
>> options like CONFIG_OF_CONTROL and CONFIG_DM should be pre-selected by
>> the mach or SoC specific Kconfig file if you always require it. An user
>> of your board should not be able to disable those options.
>>
> Ok.
>>> +CONFIG_DM_SERIAL=y
>>> +CONFIG_DM_SPI=y
>>> +CONFIG_DM_SPI_FLASH=y
>>> +CONFIG_ATH79_SPI=y
>>> +CONFIG_SPI_FLASH=y
>>> +CONFIG_SPI_FLASH_BAR=y
>>> +CONFIG_SPI_FLASH_ATMEL=y
>>> +CONFIG_SPI_FLASH_EON=y
>>> +CONFIG_SPI_FLASH_GIGADEVICE=y
>>> +CONFIG_SPI_FLASH_MACRONIX=y
>>> +CONFIG_SPI_FLASH_SPANSION=y
>>> +CONFIG_SPI_FLASH_STMICRO=y
>>> +CONFIG_SPI_FLASH_SST=y
>>> +CONFIG_SPI_FLASH_WINBOND=y
>>> +CONFIG_SPI_FLASH_USE_4K_SECTORS=y
>>> +CONFIG_SPI_FLASH_DATAFLASH=y
>>> +CONFIG_SPI_FLASH_MTD=y
>>> +CONFIG_CMD_DM=y
>>> +CONFIG_CMD_SF=y
>>> +CONFIG_CMD_SPI=y
>>> +# CONFIG_NET is not set
>>> +# CONFIG_CMD_BDI is not set
>>> +# CONFIG_CMD_CONSOLE is not set
>>> +# CONFIG_CMD_IMLS is not set
>>> +# CONFIG_CMD_XIMG is not set
>>> +# CONFIG_CMD_ELF is not set
>>> +# CONFIG_CMD_EXPORTENV is not set
>>> +# CONFIG_CMD_IMPORTENV is not set
>>> +# CONFIG_CMD_EDITENV is not set
>>> +# CONFIG_CMD_CRC32 is not set
>>> +# CONFIG_CMD_FLASH is not set
>>> +# CONFIG_CMD_FPGA is not set
>>> +# CONFIG_CMD_NFS is not set
>>> +# CONFIG_CMD_NET is not set
>>> +CONFIG_USE_PRIVATE_LIBGCC=y
>>> diff --git a/include/configs/ap121.h b/include/configs/ap121.h
>>> new file mode 100644
>>> index 0000000..5a01d11
>>> --- /dev/null
>>> +++ b/include/configs/ap121.h
>>> @@ -0,0 +1,82 @@
>>> +#ifndef __CONFIG_H
>>> +#define __CONFIG_H
>>> +
>>> +#include <linux/kconfig.h>
>>> +#include <linux/sizes.h>
>> those includes are not needed in a board config header file respectively
>> they are already included implicitely
> Ok.
>>> +
>>> +#define CONFIG_ARCH_ATH79
>>> +#define CONFIG_SOC_AR933X
>> this is already configured by Kconfig
>>
> Ok.
>>> +
>>> +#define CONFIG_DISPLAY_CPUINFO
>>> +#define CONFIG_DISPLAY_BOARDINFO
>>> +
>>> +#define CONFIG_OF_LIBFDT
>>> +
>>> +#define CONFIG_SYS_HZ 1000
>>> +#define CONFIG_SYS_MHZ 200
>>> +#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
>>> +
>>> +/* Cache Configuration */
>>> +#define CONFIG_SYS_DCACHE_SIZE 32 * SZ_1K
>>> +#define CONFIG_SYS_ICACHE_SIZE 64 * SZ_1K
>>> +#define CONFIG_SYS_CACHELINE_SIZE 32
>> you can drop this, the cache sizes will be detected automatically
> I have a try later, i will drop this if it work fine.
>>> +
>>> +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
>>> +
>>> +#define CONFIG_SYS_MALLOC_LEN ROUND(0x30000 + 128 * SZ_1K,
>>> 0x1000)
>> no need for a magic calculation, please choose a fixed value
> Ok.
>>> +
>>> +#define CONFIG_SYS_BOOTPARAMS_LEN 128 * SZ_1K
>>> +
>>> +#define CONFIG_SYS_SDRAM_BASE 0x80000000
>>> +#define CONFIG_SYS_LOAD_ADDR 0x81000000
>>> +
>>> +#define CONFIG_SYS_INIT_SP_OFFSET 0x20000
>>> +#define CONFIG_SYS_NO_FLASH
>>> +
>>> +#define CONFIG_AR933X_SERIAL
>> this is already configured by Kconfig
> Ok.
>>> +#define CONFIG_BAUDRATE 115200
>>> +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600,
>>> 115200}
>>> +
>>> +#define CONFIG_BOOTDELAY 3
>>> +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
>>> + "root=/dev/mtdblock2 " \
>>> + "rootfstype=squashfs"
>>> +#define CONFIG_BOOTCOMMAND "sf probe;" \
>>> + "mtdparts default;" \
>>> + "bootm 0x9f300000"
>>> +#define CONFIG_LZMA
>>> +
>>> +#define MTDIDS_DEFAULT "nor0=spi-flash.0"
>>> +#define MTDPARTS_DEFAULT
>>> "mtdparts=spi-flash.0:256k(u-boot)," \
>>> +
>>> "64k(u-boot-env),2752k(rootfs),896k(uImage),64k(NVRAM),64k(ART)"
>>> +
>>> +#define CONFIG_ENV_SPI_MAX_HZ 25000000
>>> +#define CONFIG_ENV_IS_IN_SPI_FLASH
>>> +#define CONFIG_ENV_OFFSET (256 * SZ_1K)
>>> +#define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
>>> +#define CONFIG_ENV_SIZE (64 * SZ_1K)
>>> +
>>> +/*
>>> + * Command
>>> + */
>>> +#define CONFIG_CMD_MTDPARTS
>>> +
>>> +/* Miscellaneous configurable options */
>>> +#define CONFIG_SYS_CBSIZE 256
>>> +#define CONFIG_SYS_MAXARGS 16
>>> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
>>> + sizeof(CONFIG_SYS_PROMPT) + 16)
>>> +#define CONFIG_SYS_LONGHELP
>>> +#define CONFIG_CMDLINE_EDITING
>>> +#define CONFIG_AUTO_COMPLETE
>>> +#define CONFIG_SYS_HUSH_PARSER
>>> +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
>> this is already configured by Kconfig
> Ok.
>>> +
>>> +/*
>>> + * Diagnostics
>>> + */
>>> +#define CONFIG_SYS_MEMTEST_START 0x80100000
>>> +#define CONFIG_SYS_MEMTEST_END 0x83f00000
>>> +#define CONFIG_CMD_MEMTEST
>>> +
>>> +#endif /* __CONFIG_H */
>>>
>
--
- Daniel
More information about the U-Boot
mailing list