[U-Boot] [PATCH] igep00x0: Do not include config_distro_defaults.h directly

[Ladislav Michl]

File is already included:
omap3_igep00x0.h -> ti_omap3_common.h -> ti_armv7_omap.h ->
ti_armv7_common.h -> config_distro_defaults.h

Signed-off-by: Ladislav Michl <ladis at linux-mips.org>
---
 include/configs/omap3_igep00x0.h | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index cf2bc3e..a64b38f 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -43,7 +43,7 @@
 #else
 #error "status LED not defined for this machine."
 #endif
-#define RED_LED_DEV				0
+#define RED_LED_DEV			0
 #define STATUS_LED_BIT			RED_LED_GPIO
 #define STATUS_LED_STATE		STATUS_LED_ON
 #define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
@@ -56,7 +56,7 @@
 #define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
 
 /* USB */
-#define CONFIG_USB_MUSB_UDC			1
+#define CONFIG_USB_MUSB_UDC		1
 #define CONFIG_USB_OMAP3		1
 #define CONFIG_TWL4030_USB		1
 
@@ -81,12 +81,8 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
 
-/*#undef CONFIG_ENV_IS_NOWHERE*/
-
 #ifndef CONFIG_SPL_BUILD
 
-#include <config_distro_defaults.h>
-
 /* Environment */
 #define ENV_DEVICE_SETTINGS \
 	"stdin=serial\0" \
@@ -138,7 +134,7 @@
 #if defined(CONFIG_CMD_NET)
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE	0x2C000000
+#define CONFIG_SMC911X_BASE		0x2C000000
 #endif /* (CONFIG_CMD_NET) */
 
 /* OneNAND boot config */
-- 
2.1.4