[U-Boot] [PATCH] igep00x0: Do not include config_distro_defaults.h directly

[Enric Balletbo Serra]

Hi Ladislav,

Thanks for the patch, some comments below

2015-12-30 2:50 GMT+01:00 Ladislav Michl <ladis at linux-mips.org>:
> File is already included:
> omap3_igep00x0.h -> ti_omap3_common.h -> ti_armv7_omap.h ->
> ti_armv7_common.h -> config_distro_defaults.h
>
> Signed-off-by: Ladislav Michl <ladis at linux-mips.org>
> ---
>  include/configs/omap3_igep00x0.h | 10 +++-------
>  1 file changed, 3 insertions(+), 7 deletions(-)
>
> diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
> index cf2bc3e..a64b38f 100644
> --- a/include/configs/omap3_igep00x0.h
> +++ b/include/configs/omap3_igep00x0.h
> @@ -43,7 +43,7 @@
>  #else
>  #error "status LED not defined for this machine."
>  #endif
> -#define RED_LED_DEV                            0
> +#define RED_LED_DEV                    0

any reason for this change ?


>  #define STATUS_LED_BIT                 RED_LED_GPIO
>  #define STATUS_LED_STATE               STATUS_LED_ON
>  #define STATUS_LED_PERIOD              (CONFIG_SYS_HZ / 2)
> @@ -56,7 +56,7 @@
>  #define CONFIG_OMAP3_GPIO_6            /* GPIO160..191 is in GPIO bank 6 */
>
>  /* USB */
> -#define CONFIG_USB_MUSB_UDC                    1
> +#define CONFIG_USB_MUSB_UDC            1

and this ?

>  #define CONFIG_USB_OMAP3               1
>  #define CONFIG_TWL4030_USB             1
>
> @@ -81,12 +81,8 @@
>  #define CONFIG_CMD_DHCP
>  #define CONFIG_CMD_PING
>
> -/*#undef CONFIG_ENV_IS_NOWHERE*/
> -

and this ?

>  #ifndef CONFIG_SPL_BUILD
>
> -#include <config_distro_defaults.h>
> -
>  /* Environment */
>  #define ENV_DEVICE_SETTINGS \
>         "stdin=serial\0" \
> @@ -138,7 +134,7 @@
>  #if defined(CONFIG_CMD_NET)
>  #define CONFIG_SMC911X
>  #define CONFIG_SMC911X_32_BIT
> -#define CONFIG_SMC911X_BASE    0x2C000000
> +#define CONFIG_SMC911X_BASE            0x2C000000

again, any reason for this change?

>  #endif /* (CONFIG_CMD_NET) */
>
>  /* OneNAND boot config */
> --
> 2.1.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot


Also, can you send this patch and the other patch (igep00x0: cleanup
ethernet support) as numbered patch series?

Thanks,

Enric