[U-Boot] Pull request: u-boot-spi/next

[Jagan Teki]

Hi Tom,

Please pull this PR.

thanks!
Jagan.

The following changes since commit 312db9f75f50b339310474d72c8524cef2bd7931:

  armv7: omap-common: Rework SPL board_mmc_init() (2015-12-14 13:42:54 -0500)

are available in the git repository at:

  git://git.denx.de/u-boot-spi.git master

for you to fetch changes up to 25aade812e40f2e869575199c64e35ebcdf5554b:

  defconfig: am437x_sk_evm: enable spi driver model (2015-12-29 13:27:46 +0530)

----------------------------------------------------------------
Jagan Teki (24):
      sf: Get spi locally from spi_flash
      spi: make mode visible to both dm and non-dm
      spi: Use mode instead of op_mode_tx
      spi: Rename SPI_TX_BP|QPP to SPI_TX_BYTE|QUAD
      sf: Move spi_read_cmds_array locally
      sf: Rename spi_flash_set_* functions
      sf: Rename bank_end to bar_end in read_bar
      sf: Remove spi_flash_remove
      sf: Minor cleanup
      sf: Use BIT macro
      sf: Fix quad bit set for micron devices
      sf: Read back and check once spansion quad bit set
      sf: Read back and check once macronix quad bit set
      sf: Write quad bit along with read status
      spi: Remove SPI_OPM_RX_EXTN
      spi: Remove SPI_OPM_RX_DIO|QIOF
      spi: Rename SPI_OPM_RX_* to SPI_RX_*
      spi: Rename op_mode_rx to mode_rx
      spi: Move flags macro's to spi_slave{} members
      spi: Fix bit assignment with flags
      spi: Use BIT macro
      spi: Minor cleanup
      sf: Make IO modes at last in read modes
      spi: Add SPI_TX_DUAL mode

Mugunthan V N (17):
      drivers: spi: ti_qspi: do not hard code chip select for memory map configuration
      drivers: spi:ti_qspi: change ti_qspi_slave to ti_qspi_priv for driver model conversion
      drivers: spi: ti_qspi: prepare driver for DM conversion
      dm: core: Add a new api to get indexed device address
      spi: Add support for dual and quad mode
      dra7xx_evm: qspi: do not define DM_SPI and DM_SPI_FLASH for spl
      dts: dra7: add spi alias for qspi
      drivers: spi: ti_qspi: convert driver to adopt device driver model
      arm: dts: dra7: add qspi register maps for memory map and control module
      arm: dts: am437x-gp-evm: add spi-flash comaptible for flash
      arm: dts: dra7-evm: add spi-flash comaptible for flash
      arm: dts: dra72-evm: add spi-flash comaptible for flash
      defconfig: dra72_evm: enable spi driver model
      defconfig: dra74_evm: enable spi driver model
      am43xx_evm: qspi: do not define DM_SPI and DM_SPI_FLASH for spl
      arm: dts: am4372: add qspi register maps for memory map
      defconfig: am437x_sk_evm: enable spi driver model

 arch/arm/dts/am4372.dtsi        |   5 +-
 arch/arm/dts/am437x-sk-evm.dts  |   2 +-
 arch/arm/dts/dra7-evm.dts       |   2 +-
 arch/arm/dts/dra7.dtsi          |   8 +-
 arch/arm/dts/dra72-evm.dts      |   2 +-
 configs/am437x_sk_evm_defconfig |   3 +
 configs/dra72_evm_defconfig     |   2 +
 configs/dra74_evm_defconfig     |   2 +
 drivers/core/device.c           |  31 ++-
 drivers/mtd/spi/sf-uclass.c     |   7 +-
 drivers/mtd/spi/sf_internal.h   |  55 +++--
 drivers/mtd/spi/sf_probe.c      |   2 +-
 drivers/mtd/spi/spi_flash.c     | 185 +++++++++-----
 drivers/spi/ich.c               |   4 +-
 drivers/spi/spi-uclass.c        |  38 ++-
 drivers/spi/ti_qspi.c           | 524 ++++++++++++++++++++++++++++------------
 include/configs/am43xx_evm.h    |   2 +
 include/configs/dra7xx_evm.h    |   5 +
 include/dm/device.h             |  11 +
 include/spi.h                   |  75 +++---
 include/spi_flash.h             |   2 -
 21 files changed, 667 insertions(+), 300 deletions(-)