[U-Boot] [PATCH v2] edminiv2: drop CONFIG_CFI_LEGACY
Albert ARIBAUD
albert.u.boot at aribaud.net
Sun Feb 1 12:08:06 CET 2015
Nowadays generic CFI code properly detects the ED Mini V2's
Macronix MX29LV400CB flash chip, therefore we can drop the
CONFIG_FLASH_CFI_LEGACY option and associated settings and code.
Signed-off-by: Albert ARIBAUD <albert.u.boot at aribaud.net>
---
Changes in v2:
- Fix typo in flash part name (MC29LV400CB... -> MX29LV400CB)
- Add Kconfig settings
board/LaCie/edminiv2/edminiv2.c | 50 -----------------------------------------
include/configs/edminiv2.h | 4 ----
2 files changed, 54 deletions(-)
diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c
index 80ec7fa..690038e 100644
--- a/board/LaCie/edminiv2/edminiv2.c
+++ b/board/LaCie/edminiv2/edminiv2.c
@@ -15,56 +15,6 @@
DECLARE_GLOBAL_DATA_PTR;
-/*
- * The ED Mini V2 is equipped with a Macronix MXLV400CB FLASH
- * which CFI does not properly detect, hence the LEGACY config.
- */
-#if defined(CONFIG_FLASH_CFI_LEGACY)
-#include <flash.h>
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
- int sectsz[] = CONFIG_SYS_FLASH_SECTSZ;
- int sect;
-
- if (base != CONFIG_SYS_FLASH_BASE)
- return 0;
-
- info->size = 0;
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- /* set each sector's start address and size based */
- for (sect = 0; sect < CONFIG_SYS_MAX_FLASH_SECT; sect++) {
- info->start[sect] = base+info->size;
- info->size += sectsz[sect];
- }
- /* This flash must be accessed in 8-bits mode, no buffer. */
- info->flash_id = 0x01000000;
- info->portwidth = FLASH_CFI_8BIT;
- info->chipwidth = FLASH_CFI_BY8;
- info->buffer_size = 0;
- /* timings are derived from the Macronix datasheet. */
- info->erase_blk_tout = 1000;
- info->write_tout = 10;
- info->buffer_write_tout = 300;
- /* Commands and addresses are for AMD mode 8-bit access. */
- info->vendor = CFI_CMDSET_AMD_LEGACY;
- info->cmd_reset = 0xF0;
- info->interface = FLASH_CFI_X8;
- info->legacy_unlock = 0;
- info->ext_addr = 0;
- info->addr_unlock1 = 0x00000aaa;
- info->addr_unlock2 = 0x00000555;
- /* Manufacturer Macronix, device MX29LV400CB, CFI 1.3. */
- info->manufacturer_id = 0x22;
- info->device_id = 0xBA;
- info->device_id2 = 0;
- info->cfi_version = 0x3133;
- info->cfi_offset = 0x0000;
- info->name = "MX29LV400CB";
-
- return 1;
-}
-#endif /* CONFIG_SYS_FLASH_CFI */
-
int board_init(void)
{
/* arch number of board */
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 70a698a..f1e8cb0 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -89,13 +89,9 @@
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_FLASH_CFI_LEGACY
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max num of sects on one chip */
#define CONFIG_SYS_FLASH_BASE 0xfff80000
-#define CONFIG_SYS_FLASH_SECTSZ \
- {16384, 8192, 8192, 32768, \
- 65536, 65536, 65536, 65536, 65536, 65536, 65536}
/* auto boot */
#define CONFIG_BOOTDELAY 3 /* default enable autoboot */
--
2.1.0
More information about the U-Boot
mailing list