February 2015 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Feb 1 00:12:44 CET 2015
Ending: Sat Feb 28 21:20:43 CET 2015
Messages: 3223

• [U-Boot] [PATCH v2] omap3: add support for QUIPOS Cairo board.   Albert ARIBAUD (3ADEV)
• [U-Boot] [PATCH v2 0/8] Extend LPC32xx functionality and add LPC32xx-based work_92015 board   Albert ARIBAUD (3ADEV)
• [U-Boot] [PATCH v2 1/8] lpc32xx: add Ethernet support   Albert ARIBAUD (3ADEV)
• [U-Boot] [PATCH v2 2/8] lpc32xx: mtd: nand: add MLC NAND controller   Albert ARIBAUD (3ADEV)
• [U-Boot] [PATCH v2 3/8] lpc32xx: i2c: add LPC32xx I2C interface support   Albert ARIBAUD (3ADEV)
• [U-Boot] [PATCH v2 4/8] lpc32xx: add GPIO support   Albert ARIBAUD (3ADEV)
• [U-Boot] [PATCH v2 5/8] lpc32xx: add LPC32xx SSP support (SPI mode)   Albert ARIBAUD (3ADEV)
• [U-Boot] [PATCH v2 6/8] dtt: add ds620 support   Albert ARIBAUD (3ADEV)
• [U-Boot] [PATCH v2 7/8] lpc32xx: add lpc32xx-spl.bin boot image target   Albert ARIBAUD (3ADEV)
• [U-Boot] [PATCH v2 8/8] lpc32xx: add support for board work_92105   Albert ARIBAUD (3ADEV)
• [U-Boot] [PATCH] buildman: allow multiple toolchains in a single path   Albert ARIBAUD
• [U-Boot] [PATCH v4 1/2] Errata/ARM57: Add basic constructs to handle and apply A57 specific erratas   Albert ARIBAUD
• [U-Boot] [PATCH v4 2/2] configs/ls2085a: Add support for Cortex-A57 erratas   Albert ARIBAUD
• [U-Boot] Nokia RX-51: Use generic board   Albert ARIBAUD
• [U-Boot] [PATCH v2] arm/ls1021a: Add workaround for DDR erratum A008378   Albert ARIBAUD
• [U-Boot] [PATCH 2/3] arm: relocation: clear .bss section with arch memset if defined   Albert ARIBAUD
• [U-Boot] [PATCH] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] [RFC PATCH 0/21] ARM: start to move SoC code into arch/arm/mach-*   Albert ARIBAUD
• [U-Boot] [RFC PATCH 6/7] arm: Show relocated PC/LR in the register dump   Albert ARIBAUD
• [U-Boot] [PATCH 0/1] fix ARM DCC support for ARMv7 based cores (e.g. CortexA)   Albert ARIBAUD
• [U-Boot] [RFC PATCH 0/21] ARM: start to move SoC code into arch/arm/mach-*   Albert ARIBAUD
• [U-Boot] [PATCH] edminiv2: drop CONFIG_CFI_LEGACY   Albert ARIBAUD
• [U-Boot] [PATCH v2] edminiv2: drop CONFIG_CFI_LEGACY   Albert ARIBAUD
• [U-Boot] [RFC PATCH 0/21] ARM: start to move SoC code into arch/arm/mach-*   Albert ARIBAUD
• [U-Boot] [RFC PATCH 6/7] arm: Show relocated PC/LR in the register dump   Albert ARIBAUD
• [U-Boot] Patch to add support for BAV335x boards   Albert ARIBAUD
• [U-Boot] Loop Variable through to user space   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] cmd_fdt: Print the control fdt in terms of virtual memory   Albert ARIBAUD
• [U-Boot] [PATCH] RSA depends on DM   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] ARmv7: Add a soc_init hook to start.S   Albert ARIBAUD
• [U-Boot] [PATCH 2/5] arm: Allow reset init to be controlled   Albert ARIBAUD
• [U-Boot] [PATCH 1/5] arm: Use r2 instead of r0 in start.S   Albert ARIBAUD
• [U-Boot] [PATCH 3/5] arm: Allow lr to be saved by board code   Albert ARIBAUD
• [U-Boot] [PATCH 5/5] RFC: sunxi: WIP FEL support   Albert ARIBAUD
• [U-Boot] Let's bury CONFIG_NEEDS_MANUAL_RELOC   Albert ARIBAUD
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Albert ARIBAUD
• [U-Boot] [PATCH] odroid: update link to X2/U3 proprietary binaries   Albert ARIBAUD
• [U-Boot] [PATCH 3/5] arm: Allow lr to be saved by board code   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] ARmv7: Add a soc_init hook to start.S   Albert ARIBAUD
• [U-Boot] [PATCH] arm: implement find_next_zero_bit function   Albert ARIBAUD
• [U-Boot] [PATCH 1/3] ARmv7: Add a soc_init hook to start.S   Albert ARIBAUD
• [U-Boot] relocation on freescale mx35 doesn't work after update to 2015.01   Albert ARIBAUD
• [U-Boot] [RFC PATCH 6/9] x86: quark: Enable the Memory Reference Code build   Albert ARIBAUD
• [U-Boot] relocation on freescale mx35 doesn't work after update to 2015.01   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/8] lpc32xx: add GPIO support   Albert ARIBAUD
• [U-Boot] [PATCH v2 8/8] lpc32xx: add support for board work_92105   Albert ARIBAUD
• [U-Boot] [PATCH v2 3/8] lpc32xx: i2c: add LPC32xx I2C interface support   Albert ARIBAUD
• [U-Boot] [U-Boot, v2, 8/8] lpc32xx: add support for board work_92105   Albert ARIBAUD
• [U-Boot] [PATCH v2 5/8] lpc32xx: add LPC32xx SSP support (SPI mode)   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/8] Extend LPC32xx functionality and add LPC32xx-based work_92015 board   Albert ARIBAUD
• [U-Boot] v2015.04-rc1 and -rc2 regression wrt 2015.01 on igep0032 (commit f3b4bc45)   Albert ARIBAUD
• [U-Boot] rpi_2 builds fine with make, fails with buildman   Albert ARIBAUD
• [U-Boot] [PATCH v2] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] [PATCH] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] [PATCH v2] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/3] Clean out SPL ready for driver model   Albert ARIBAUD
• [U-Boot] [PATCH 0/1] fix ARM DCC support for ARMv7 based cores (e.g. CortexA)   Albert ARIBAUD
• [U-Boot] [PATCH] edminiv2: switch to generic board support   Albert ARIBAUD
• [U-Boot] [PATCH] edminiv2: fix PCIE IO base address typo   Albert ARIBAUD
• [U-Boot] [PATCH] edminiv2: switch to SPL   Albert ARIBAUD
• [U-Boot] [PATCH v2] edminiv2: drop CONFIG_CFI_LEGACY   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/3] Clean out SPL ready for driver model   Albert ARIBAUD
• [U-Boot] [PATCH] ARM: move -march=* and -mtune= options to arch/arm/Makefile   Albert ARIBAUD
• [U-Boot] [PATCH v2] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] rpi_2 builds fine with make, fails with buildman   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/3] Clean out SPL ready for driver model   Albert ARIBAUD
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/3] Clean out SPL ready for driver model   Albert ARIBAUD
• [U-Boot] [PATCH 2/4] apalis/colibri_t30: fix MMC/SD card detect GPIOs   Stefan Agner
• [U-Boot] mpc8308rdb generic board support   Sinan Akman
• [U-Boot] [ANN] U-Boot v2015.04-rc1 released   Sinan Akman
• [U-Boot] [PATCH] mpc837xerdb: "fix Calling __hwconfig without a buffer" warning   Sinan Akman
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Sinan Akman
• [U-Boot] [PATCH] arm: implement find_next_zero_bit function   Vitaly Andrianov
• [U-Boot] [PATCH] net: keystone_net: move serdes setup to initialization function   Vitaly Andrianov
• [U-Boot] [PATCH] keystone2: ddr3: eliminate using global ddr3_size variable   Vitaly Andrianov
• [U-Boot] [PATCH] arm: implement find_next_zero_bit function   Vitaly Andrianov
• [U-Boot] [U-boot][PATCH] keystone2: add support for UART download   Vitaly Andrianov
• [U-Boot] [U-boot][PATCH] keystone2: add support for UART download   Vitaly Andrianov
• [U-Boot] [U-boot][PATCH v2] keystone2: add support for UART download   Vitaly Andrianov
• [U-Boot] [U-boot][PATCH v2] keystone2: add support for UART download   Vitaly Andrianov
• [U-Boot] [U-boot][PATCH] keystone2: add support for UART download   Vitaly Andrianov
• [U-Boot] [PATCH 2/3] arm: relocation: clear .bss section with arch memset if defined   Pantelis Antoniou
• [U-Boot] [PATCH] mmc: dw_mmc: fixed the wrong bit control   Pantelis Antoniou
• [U-Boot] [PATCH 1/3] mmc: dw_mmc: fixed the wrong bit control   Pantelis Antoniou
• [U-Boot] [PATCH 2/3] mmc: exynos_dw_mmc: set to clksel_val into board-init function   Pantelis Antoniou
• [U-Boot] [PATCH 2/3] mmc: exynos_dw_mmc: set to clksel_val into board-init function   Pantelis Antoniou
• [U-Boot] [PATCH 1/2] sunxi: mmc: Always declare High Capacity capability   Pantelis Antoniou
• [U-Boot] [PATCH V3 1/2] mmc: exynos dwmmc: check boot mode before init dwmmc   Pantelis Antoniou
• [U-Boot] [PATCH V3 2/2] mmc: print SD/eMMC type for inited mmc devices   Pantelis Antoniou
• [U-Boot] [PATCH] mmc: sdhci: fix bus width switching on Samsung SoCs   Pantelis Antoniou
• [U-Boot] Possible bug in s5p_sdhci.c   Pantelis Antoniou
• [U-Boot] Possible bug in sdhci.c   Pantelis Antoniou
• [U-Boot] Pull request: u-boot-mmc 23022015   Pantelis Antoniou
• [U-Boot] U-Boot gitweb   Stefano Babic
• [U-Boot] [PATCH] imx: don't clobber reset cause   Stefano Babic
• [U-Boot] [PATCH] imx: don't clobber reset cause   Stefano Babic
• [U-Boot] [PATCH] imx: don't clobber reset cause   Stefano Babic
• [U-Boot] [PATCH] imx: don't clobber reset cause   Stefano Babic
• [U-Boot] [PATCH] mx53loco: Fix boot hang during reboot stress test   Stefano Babic
• [U-Boot] [PATCH 1/4] mx6sx: pins: Enable SION for I2C3 iomux setting   Stefano Babic
• [U-Boot] [PATCH 2/4] mx6: soc: Add ENET2 support   Stefano Babic
• [U-Boot] [PATCH 3/4] mx6: clock: Modify GPMI clock to support mx6sx   Stefano Babic
• [U-Boot] [PATCH 4/4] imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO board   Stefano Babic
• [U-Boot] [PATCH] imx: mx6qsabreauto: Change to use common GPMI IO clock function   Stefano Babic
• [U-Boot] [PATCH 03/12] imx:mx6slevk implement power init board   Stefano Babic
• [U-Boot] [PATCH 04/12] imx:mx6 update mxc_ccm_reg   Stefano Babic
• [U-Boot] [PATCH 07/12] imx:mx6 Support LDO bypass   Stefano Babic
• [U-Boot] [PATCH 05/12] imx:mx6 update fuse_bank0_regs   Stefano Babic
• [U-Boot] [PATCH 06/12] pmic:pfuze add macro for setting voltage   Stefano Babic
• [U-Boot] [PATCH] imx: mx6qsabreauto: Change to use common GPMI IO clock function   Stefano Babic
• [U-Boot] [PATCH] imx: imximage: Add QuadSPI boot support   Stefano Babic
• [U-Boot] [PATCH] imx: mx6: Fixed AIPS3 base address issue   Stefano Babic
• [U-Boot] [v3 PATCH 1/3] arm: mxs: Add debug outputs and comments to mxs SPL source files   Stefano Babic
• [U-Boot] [v3 PATCH 2/3] arm: mxs: Enable booting of mx28 without battery   Stefano Babic
• [U-Boot] [v3 PATCH 3/3] arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode   Stefano Babic
• [U-Boot] [PATCH 1/3] video: Update MXS LCDIF driver for mx6sx   Stefano Babic
• [U-Boot] [PATCH 2/3] imx: mx6: Update mx6sx registers and clock functions for display   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Stefano Babic
• [U-Boot] [PATCH 07/12] imx:mx6 Support LDO bypass   Stefano Babic
• [U-Boot] [PATCH] imx: don't clobber reset cause   Stefano Babic
• [U-Boot] [PATCH 2/2] mx6: Rework s_init to be spl_board_init() and gate_ungate_all_mx6_pfds()   Stefano Babic
• [U-Boot] [PATCH v5 2/3] pmic:pfuze implement pmic_mode_init   Stefano Babic
• [U-Boot] [PATCH 2/4] mx6: soc: Add ENET2 support   Stefano Babic
• [U-Boot] [PATCH 3/4] mx6: clock: Modify GPMI clock to support mx6sx   Stefano Babic
• [U-Boot] relocation on freescale mx35 doesn't work after update to 2015.01   Stefano Babic
• [U-Boot] [PATCH v3 0/3] imx: mx6slevk add pmic support   Stefano Babic
• [U-Boot] [PATCH 1/4] mx6sx: pins: Enable SION for I2C3 iomux setting   Stefano Babic
• [U-Boot] [PATCH 02/12] remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ   Stefano Babic
• [U-Boot] [PATCH 2/2] nitrogen6x: set environment variable reset_cause   Stefano Babic
• [U-Boot] [PATCH 2/2] ot1200: add eeprom command to non-SPL build   Stefano Babic
• [U-Boot] [PATCH 1/2] cmd_eeprom: make it possible to define the used i2c bus   Stefano Babic
• [U-Boot] [PATCH 4/4] warp: Add initial WaRP Board support   Stefano Babic
• [U-Boot] [PATCH 2/3] ARM: imx6: disable bandgap self-bias after boot   Stefano Babic
• [U-Boot] [PATCH 3/3] ARM: imx6 Add WDOG3 for i.MX6SX   Stefano Babic
• [U-Boot] [PATCH 1/2] cmd_eeprom: make it possible to define the used i2c bus   Stefano Babic
• [U-Boot] [PATCH 2/2] ot1200: add eeprom command to non-SPL build   Stefano Babic
• [U-Boot] [PATCH 1/2] ARM: i.MX: provide access to reset cause through get_imx_reset_cause()   Stefano Babic
• [U-Boot] [PATCH 2/2] nitrogen6x: set environment variable reset_cause   Stefano Babic
• [U-Boot] [PATCH] board: tbs2910: Gate clock when switching async clock muxes   Stefano Babic
• [U-Boot] [PATCH] board: tbs2910: Gate clock when switching async clock muxes   Stefano Babic
• [U-Boot] [PATCH v4] imx6: Added DEK blob generator command   Stefano Babic
• [U-Boot] [PATCH 2/2] mx25pdk: Turn on the LCD supply   Stefano Babic
• [U-Boot] [PATCH v3 2/3] imx:mx6slevk add pmic and i2c configuration   Stefano Babic
• [U-Boot] [PATCH v3 3/3] imx:mx6slevk implement power init board   Stefano Babic
• [U-Boot] [PATCH v2 4/4] warp: Add initial WaRP Board support   Stefano Babic
• [U-Boot] [PATCH v2 3/4] imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use   Stefano Babic
• [U-Boot] [PATCH v3 1/3] imx:mx6sl add I2c pad settings   Stefano Babic
• [U-Boot] [PATCH] board: tbs2910: Gate clock when switching async clock muxes   Stefano Babic
• [U-Boot] [PATCH v2 2/4] mmc: fsl_esdhc: Add support to force VSELECT set   Stefano Babic
• [U-Boot] [PATCH v2 1/4] mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V   Stefano Babic
• [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support   Stefano Babic
• [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support   Stefano Babic
• [U-Boot] [PATCH][v3] powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041   Aneesh Bansal
• [U-Boot] [PATCH 1/2][v4] powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041   Aneesh Bansal
• [U-Boot] [PATCH 2/2] powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P5020 and P5040   Aneesh Bansal
• [U-Boot] [PATCH] arm: rmobile: Add SILK board support   Vladimir Barinov
• [U-Boot] [PATCH] arm: rmobile: Add missed header file for Silk board   Vladimir Barinov
• [U-Boot] [U-boot][PATCH] serial: sh: fix internal clock source on SCIF   Vladimir Barinov
• [U-Boot] [U-boot][PATCH] arm: rmobile: Add Porter board support   Vladimir Barinov
• [U-Boot] [PATCH 0/4] arm: rmobile: silk: minor fixes and SDHI support   Vladimir Barinov
• [U-Boot] [PATCH 1/4] arm: rmobile: silk: Fix GPIO4_31 initialization   Vladimir Barinov
• [U-Boot] [PATCH 2/4] arm: rmobile: silk: Disable ethernet pins pull-up   Vladimir Barinov
• [U-Boot] [PATCH 3/4] arm: rmobile: silk: fix typo in device declaration   Vladimir Barinov
• [U-Boot] [PATCH 4/4] arm: rmobile: silk: Add support SDHI   Vladimir Barinov
• [U-Boot] [PATCH 1/3] usb: ci_udc: Fix set address to work with older controllers   Alban Bedel
• [U-Boot] [PATCH 2/3] ARM: tegra: Fix the USB gadget configuration for T20   Alban Bedel
• [U-Boot] [PATCH 3/3] ARM: tegra: usb gadgets: Allow accessing the NAND via DFU   Alban Bedel
• [U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init   Alban Bedel
• [U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init   Alban Bedel
• [U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init   Alban Bedel
• [U-Boot] [PATCH 3/3] ARM: tegra: usb gadgets: Allow accessing the NAND via DFU   Alban Bedel
• [U-Boot] [PATCH 2/3] ARM: tegra: Fix the USB gadget configuration for T20   Alban Bedel
• [U-Boot] [PATCH 1/3] usb: ci_udc: Fix set address to work with older controllers   Alban Bedel
• [U-Boot] [PATCH v2] tegra20: tamonten: Fix the early gpio init   Alban Bedel
• [U-Boot] [PATCH 1/3] usb: ci_udc: Fix set address to work with older controllers   Alban Bedel
• [U-Boot] [PATCH 09/11] ARM: armada100: remove aspenite and gplugd board support   Ajay Bhargav
• [U-Boot] [PATCH 1/2] arm:gplugd: Convert to generic board   Ajay Bhargav
• [U-Boot] [PATCH 2/2] arm:aspenite: Convert to generic board   Ajay Bhargav
• [U-Boot] [RFC/PATCH] tools: New 'spl-stackusage' script   Andreas Bießmann
• [U-Boot] recent tools on FreeBSD   Andreas Bießmann
• [U-Boot] [PATCH v3 0/12] avr32: add generic board   Andreas Bießmann
• [U-Boot] [PATCH v3 01/12] avr32: use dlmalloc for DMA buffers   Andreas Bießmann
• [U-Boot] [PATCH v3 02/12] avr32: rename cpu_init() -> arch_cpu_init()   Andreas Bießmann
• [U-Boot] [PATCH v3 03/12] avr32: factor out cpu_mmc_init()   Andreas Bießmann
• [U-Boot] [PATCH v3 04/12] avr32: rename mmu.h definitions   Andreas Bießmann
• [U-Boot] [PATCH v3 05/12] avr32: convert to dram_init()   Andreas Bießmann
• [U-Boot] [PATCH v3 06/12] avr32: use generic gd->start_addr_sp   Andreas Bießmann
• [U-Boot] [PATCH v3 07/12] common/board_f: factor out reserve_stacks   Andreas Bießmann
• [U-Boot] [PATCH v3 08/12] common/board_r: manual relocation for cmd table   Andreas Bießmann
• [U-Boot] [PATCH v3 09/12] common/board_r: allocate bootparams   Andreas Bießmann
• [U-Boot] [PATCH v3 10/12] avr32: add generic board support   Andreas Bießmann
• [U-Boot] [PATCH v3 11/12] grasshopper: enable generic board   Andreas Bießmann
• [U-Boot] [PATCH v3 12/12] atstk1002: enable generic board   Andreas Bießmann
• [U-Boot] recent tools on FreeBSD   Andreas Bießmann
• [U-Boot] recent tools on FreeBSD   Andreas Bießmann
• [U-Boot] [RFC PATCH] tools/imagetool: remove linker generated list   Andreas Bießmann
• [U-Boot] [U-Boot, v2, 01/13] ARM: atmel: clock: make it possible to configure HMX32   Andreas Bießmann
• [U-Boot] [U-Boot,v2,02/13] ARM: atmel: sama5: add bus matrix header file   Andreas Bießmann
• [U-Boot] [U-Boot,v2,03/13] ARM: atmel: sama5: add sfr register header file   Andreas Bießmann
• [U-Boot] [U-Boot,v2,04/13] ARM: atmel: spl: add weak bus matrix init function   Andreas Bießmann
• [U-Boot] [U-Boot,v2,05/13] ARM: atmel: spl: add saic to aic redirect function   Andreas Bießmann
• [U-Boot] [U-Boot,v2,06/13] ARM: atmel: spl: can not disable osc for sama5d4   Andreas Bießmann
• [U-Boot] [U-Boot, v2, 07/13] ARM: atmel: sama5d4: add matrix1 base addr definition   Andreas Bießmann
• [U-Boot] [U-Boot,v2,08/13] ARM: atmel: sama5d4: add bus matrix init function   Andreas Bießmann
• [U-Boot] [U-Boot, v2, 09/13] ARM: atmel: sama5d4: add interrupt redirect function   Andreas Bießmann
• [U-Boot] [U-Boot, v2, 10/13] ARM: atmel: sama5d4: can access DDR in interleave mode   Andreas Bießmann
• [U-Boot] [U-Boot, v2, 11/13] ARM: atmel: sama5d4: build related file when enable SPL   Andreas Bießmann
• [U-Boot] [U-Boot,v2,12/13] ARM: atmel: sama5d4ek: enable SPL support   Andreas Bießmann
• [U-Boot] [U-Boot,v2,13/13] ARM: atmel: sama5d4_xplained: enable spl support   Andreas Bießmann
• [U-Boot] ARM: atmel: cleanup: remove at91cap9 related code   Andreas Bießmann
• [U-Boot] mtd: atmel_nand: according to pmecc version to perform 0xff page correction   Andreas Bießmann
• [U-Boot] ARM: at91: mmc portA support is only for at91sam9g20ek_2mmc board   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 1/3] ARM: at91: sama5d3_xplained: save environment in a FAT file in MMC card   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 2/3] ARM: at91: sama5d3xek: save enviroment as a FAT file in MMC card   Andreas Bießmann
• [U-Boot] [U-Boot, v3, 3/3] ARM: at91: at91sam9x5: save environment to a FAT file in MMC card   Andreas Bießmann
• [U-Boot] [U-Boot,v1,1/4] arm, at91, wdt: do not disable WDT in SPL   Andreas Bießmann
• [U-Boot] [U-Boot,v1,2/4] common/board_f: add at91 wdt   Andreas Bießmann
• [U-Boot] [U-Boot,v1,3/4] arm, at91, wdt: make timeout configurable   Andreas Bießmann
• [U-Boot] [U-Boot,v1,4/4] arm, at91, taurus: enable WDT   Andreas Bießmann
• [U-Boot] arm, at91: add reset controller status register   Andreas Bießmann
• [U-Boot] arm, at91: taurus remove MACH_TYPE definitions in config file   Andreas Bießmann
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master   Andreas Bießmann
• [U-Boot] MACB TX timeout   Andreas Bießmann
• [U-Boot] [PATCH v3 10/12] avr32: add generic board support   Andreas Bießmann
• [U-Boot] [PATCH v1] tools/imagetool: remove linker script   Andreas Bießmann
• [U-Boot] [PATCH] mtd: atmel_nand: according to pmecc version to perform 0xff page correction   Andreas Bießmann
• [U-Boot] [RFC/PATCH] tools: New 'spl-stackusage' script   Andreas Bießmann
• [U-Boot] [PATCH v3 1/4] dm: at91: Drop use of ATMEL_PIO_PORTS in the header file   Andreas Bießmann
• [U-Boot] [PATCH] tools: imagetool: Remove "INSERT BEFORE" from linker script   Andreas Bießmann
• [U-Boot] [U-Boot,v3,01/12] avr32: use dlmalloc for DMA buffers   Andreas Bießmann
• [U-Boot] [U-Boot,v3,02/12] avr32: rename cpu_init() -> arch_cpu_init()   Andreas Bießmann
• [U-Boot] [U-Boot,v3,03/12] avr32: factor out cpu_mmc_init()   Andreas Bießmann
• [U-Boot] [U-Boot,v3,04/12] avr32: rename mmu.h definitions   Andreas Bießmann
• [U-Boot] [U-Boot,v3,05/12] avr32: convert to dram_init()   Andreas Bießmann
• [U-Boot] [U-Boot,v3,06/12] avr32: use generic gd->start_addr_sp   Andreas Bießmann
• [U-Boot] [U-Boot,v3,07/12] common/board_f: factor out reserve_stacks   Andreas Bießmann
• [U-Boot] [U-Boot,v3,09/12] common/board_r: allocate bootparams   Andreas Bießmann
• [U-Boot] [U-Boot,v3,10/12] avr32: add generic board support   Andreas Bießmann
• [U-Boot] [U-Boot,v3,11/12] grasshopper: enable generic board   Andreas Bießmann
• [U-Boot] [U-Boot,v3,12/12] atstk1002: enable generic board   Andreas Bießmann
• [U-Boot] [PULL] u-boot-avr32/master -> u-boot/master   Andreas Bießmann
• [U-Boot] [PULL] u-boot-avr32/master -> u-boot/master   Andreas Bießmann
• [U-Boot] [PULL v2] u-boot-avr32/master -> u-boot/master   Andreas Bießmann
• [U-Boot] omap_gpmc: Do not default to HAM1 when SW ECC is selected   Andreas Bießmann
• [U-Boot] MIPS UHI spec   Andrew Bresticker
• [U-Boot] MIPS UHI spec   Andrew Bresticker
• [U-Boot] Hang when enabling DCache on a iMX6 board   Boris Brezillon
• [U-Boot] Hang when enabling DCache on a iMX6 board   Boris Brezillon
• [U-Boot] [PATCH 0/3] board/seco: Add mx6q-uq7 basic board support   Boris Brezillon
• [U-Boot] [PATCH 1/3] ARM: mx6: move to a standard arch/board approach   Boris Brezillon
• [U-Boot] [PATCH 2/3] ARM: iMX: define an IMX_CONFIG Kconfig option   Boris Brezillon
• [U-Boot] [PATCH 3/3] board/seco: Add mx6q-uq7 basic board support   Boris Brezillon
• [U-Boot] [PATCH 0/2] Add getenv_long and Micrel ksz9031 skew settings   Vince Bridgers
• [U-Boot] [PATCH 1/2] cmd: Add getenv_long to support reading signed integers from the uboot env   Vince Bridgers
• [U-Boot] [PATCH 2/2] net: phy: Add ability to program the ksz9031 skew values from the uboot env   Vince Bridgers
• [U-Boot] [PATCH 2/2] net: phy: Add ability to program the ksz9031 skew values from the uboot env   Vince Bridgers
• [U-Boot] [PATCH 2/2] net: phy: Add ability to program the ksz9031 skew values from the uboot env   Vince Bridgers
• [U-Boot] [PATCH 2/2] net: phy: Add ability to program the ksz9031 skew values from the uboot env   Vince Bridgers
• [U-Boot] [PATCH 2/2] net: phy: Add ability to program the ksz9031 skew values from the uboot env   Vince Bridgers
• [U-Boot] [PATCH 2/2] net: phy: Add ability to program the ksz9031 skew values from the uboot env   Vince Bridgers
• [U-Boot] [PATCH 00/12] ARC: more improvements   Alexey Brodkin
• [U-Boot] [PATCH 01/12] arc: memcmp - fix zero-delay loop utilization   Alexey Brodkin
• [U-Boot] [PATCH 02/12] arc: remove CPU hard-coded selection from board description in include/configs   Alexey Brodkin
• [U-Boot] [PATCH 03/12] arc: add more flavours of ARC700 series CPU   Alexey Brodkin
• [U-Boot] [PATCH 04/12] arc: define and use PTAG AUX regs for MMUv3 only   Alexey Brodkin
• [U-Boot] [PATCH 05/12] arc: select cache settings via menuconfig   Alexey Brodkin
• [U-Boot] [PATCH 06/12] arc: add selection of endianess in Kconfig   Alexey Brodkin
• [U-Boot] [PATCH 07/12] arc: hard-code CONFIG_SYS_GENERIC_BOARD into asm/config.h   Alexey Brodkin
• [U-Boot] [PATCH 08/12] arc: get rid of useless CONFIG_SKIP_LOWLEVEL_INIT   Alexey Brodkin
• [U-Boot] [PATCH 09/12] arc: hard-code CONFIG_ARCH_EARLY_INIT_R in asm/config.h   Alexey Brodkin
• [U-Boot] [PATCH 10/12] arc: move SYS_MONITOR_BASE setup in Konfig   Alexey Brodkin
• [U-Boot] [PATCH 11/12] arc: move CPU flags selection to the main "config.mk"   Alexey Brodkin
• [U-Boot] [PATCH 12/12] arc: build libgcc in U-Boot   Alexey Brodkin
• [U-Boot] Please pull u-boot-arc master   Alexey Brodkin
• [U-Boot] Please pull u-boot-arc master   Alexey Brodkin
• [U-Boot] Please pull u-boot-arc master   Alexey Brodkin
• [U-Boot] Please pull u-boot-arc master   Alexey Brodkin
• [U-Boot] Please pull u-boot-arc master   Alexey Brodkin
• [U-Boot] [PATCH] arc: introduce U-Boot port for ARCv2 ISA   Alexey Brodkin
• [U-Boot] [PATCH] arc: introduce U-Boot port for ARCv2 ISA   Alexey Brodkin
• [U-Boot] please pull u-boot-arc master   Alexey Brodkin
• [U-Boot] please pull u-boot-arc master   Alexey Brodkin
• [U-Boot] please pull u-boot-arc master   Alexey Brodkin
• [U-Boot] [PATCH v2 17/19] dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig   Alexey Brodkin
• [U-Boot] [PATCH] use ASM_NL instead of '; ' for assembler new line character in the macro   Alexey Brodkin
• [U-Boot] [PATCH] lib/asm-offsets - make GD_RELOCADDR, GD_RELOC_OFF & GD_START_ADDR_SP available for all architectures   Alexey Brodkin
• [U-Boot] board_f for x86   Alexey Brodkin
• [U-Boot] [PATCH] common/board_f: implement type casting for gd structure   Alexey Brodkin
• [U-Boot] [PATCH] stdio: extend "name" to 32 symbols   Alexey Brodkin
• [U-Boot] [PATCH v3 0/12] avr32: add generic board   Waldemar Brodkorb
• [U-Boot] [PATCH] add example for file on VFAT filesystem usage   Waldemar Brodkorb
• [U-Boot] [PATCH] add example for file on VFAT filesystem usage   Waldemar Brodkorb
• [U-Boot] MPC8541 / MPC8555E: DDR_SDRAM_CLK_CNLT[SS_EN] handling   Curt Brune
• [U-Boot] [PATCH 1/1] MPC8541/MPC8555: Enable SS_EN in DDR_SDRAM_CLK_CNLT register   Curt Brune
• [U-Boot] MIPS UHI spec   Paul Burton
• [U-Boot] [PATCH 1/2] sunxi: video: Do not use CONFIG_SYS_MEM_TOP_HIDE for the framebuffer   Ian Campbell
• [U-Boot] [PATCH 2/2] sunxi: video: Dynamically reserve framebuffer memory   Ian Campbell
• [U-Boot] [PATCH] sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART   Ian Campbell
• [U-Boot] [PATCH 1/2] sunxi: video: Do not use CONFIG_SYS_MEM_TOP_HIDE for the framebuffer   Ian Campbell
• [U-Boot] [PATCH 0/4] sunxi: SPL size reduction patches   Ian Campbell
• [U-Boot] [PATCH v1 0/4] Jetson-TK1 support for PSCI   Ian Campbell
• [U-Boot] [PATCH v1 0/4] Jetson-TK1 support for PSCI   Ian Campbell
• [U-Boot] [PATCH v2 15/19] dm: sunxi: Move driver model CONFIGs to Kconfig   Ian Campbell
• [U-Boot] [PATCH 3/3] sunxi: Switch to using soc_init hook for setting the ACTLR.SMP bit   Ian Campbell
• [U-Boot] [PATCH] sunxi: otg: Fix peripheral mode   Ian Campbell
• [U-Boot] [PATCH 3/4] sunxi: video: Add support for tl059wv5c0 lcd panels   Ian Campbell
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Ian Campbell
• [U-Boot] [PATCH v1 0/4] Jetson-TK1 support for PSCI   Ian Campbell
• [U-Boot] [linux-sunxi] [UBOOT] Both Linux-Sunxi and Mainline Uboot have issues   Ian Campbell
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Ian Campbell
• [U-Boot] [PATCH] sunxi: Fix sun5i mbus speed when booting old kernels   Ian Campbell
• [U-Boot] [PATCH] sunxi: Set the /chosen/stdout-path fdt property for sunxi boards   Ian Campbell
• [U-Boot] [PATCH] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels   Ian Campbell
• [U-Boot] [PATCH v2] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels   Ian Campbell
• [U-Boot] [PATCH 1/2] sunxi: mmc: Always declare High Capacity capability   Ian Campbell
• [U-Boot] [PATCH 2/2] sunxi: Add support for the UTOO P66 tablet   Ian Campbell
• [U-Boot] [PATCH v2 3/4] kconfig: switch to single .config configuration   Ian Campbell
• [U-Boot] [PATCH 1/2] dreamplug: switch to GENERIC_BOARD   Ian Campbell
• [U-Boot] [PATCH 2/2] dreamplug: set CONFIG_BUILD_TARGET to build u-boot.kwb   Ian Campbell
• [U-Boot] [PATCH] added defconfig for Jesurun Q5   Ian Campbell
• [U-Boot] [RFC] sunxi: Support uploading 'boot.scr' to RAM over USB OTG in FEL mode   Ian Campbell
• [U-Boot] [PATCH] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels   Ian Campbell
• [U-Boot] Question about Arndale Octa board (Exynos 5420) and HYP mode   Fabio Canigliula
• [U-Boot] i.MX28 u-boot SPL fail   Marco Cavallini
• [U-Boot] moderated list?   Marco Cavallini
• [U-Boot] i.MX28 u-boot SPL fail   Marco Cavallini
• [U-Boot] i.MX28 u-boot SPL fail   Marco Cavallini
• [U-Boot] i.MX28 u-boot SPL fail   Marco Cavallini
• [U-Boot] Message rejected. No base64 encoded MIME text parts allowed.   Marco Cavallini
• [U-Boot] How to program u-boot in eMMC/MMC on iMX   Marco Cavallini
• [U-Boot] [PATCH] spl_mem_init.c : Added support for mDDR in SPL for i.MX28   Marco Cavallini
• [U-Boot] How to program u-boot in eMMC/MMC on iMX   Marco Cavallini
• [U-Boot] How to program u-boot in eMMC/MMC on iMX   Marco Cavallini
• [U-Boot] [PATCH] omap: gpmc: 'nandecc sw' can use HAM1 or BCH8   Ash Charles
• [U-Boot] Question on the max size of SPL and OMAP3 SRAM   Ash Charles
• [U-Boot] [PATCH 0/3] mmc: dw_mmc: fixed minor problems   Jaehoon Chung
• [U-Boot] [PATCH 1/3] mmc: dw_mmc: fixed the wrong bit control   Jaehoon Chung
• [U-Boot] [PATCH 2/3] mmc: exynos_dw_mmc: set to clksel_val into board-init function   Jaehoon Chung
• [U-Boot] [PATCH 3/3] mmc: exynos_dw_mmc: use the exynos specific data structure   Jaehoon Chung
• [U-Boot] [PATCH] mmc: s5p: properly mask SELBASECLK   Jaehoon Chung
• [U-Boot] [PATCH] net/phy/realtek: Disable interrupt on Realtek Ethernet PHY drivers   Codrin Ciubotariu
• [U-Boot] powerpc/e5500: looks like init is setting a reserved HID0 bit in start.S?   Robert E Cochran
• [U-Boot] [PATCH] am43xx_evm: Add netboot and related to environment   Cooper Jr., Franklin
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   DaveKucharczyk
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   DaveKucharczyk
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   DaveKucharczyk
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   DaveKucharczyk
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   DaveKucharczyk
• [U-Boot] BDI3000 U-Boot debugging questions (MX51/MX53)   DaveKucharczyk
• [U-Boot] [ANN] U-Boot v2015.04-rc1 released   Wolfgang Denk
• [U-Boot] 0001-Adding-Support-for-BAV335x-boards.patch   Wolfgang Denk
• [U-Boot] 0001-Adding-Support-for-BAV335x-boards.patch   Wolfgang Denk
• [U-Boot] Patch to add support for BAV335x boards   Wolfgang Denk
• [U-Boot] How to have U-boot loading U-boot   Wolfgang Denk
• [U-Boot] How to have U-boot loading U-boot   Wolfgang Denk
• [U-Boot] [PATCH 6/6] imx:mx6sxsabresd board spl support   Nikolay Dimitrov
• [U-Boot] [PATCH 1/4] mx6sx: pins: Enable SION for I2C3 iomux setting   Nikolay Dimitrov
• [U-Boot] u-boot tftp problem   Nikolay Dimitrov
• [U-Boot] u-boot tftp problem   Nikolay Dimitrov
• [U-Boot] [PATCH v2 2/2] mx6sabre: Select BOUNCE_BUFFER and CMD_EXT options   Nikolay Dimitrov
• [U-Boot] [PATCH v3 2/2] mx6sabre: Select CMD_EXT4 options   Nikolay Dimitrov
• [U-Boot] [RFC] m68k: generic board   Angelo Dureghello
• [U-Boot] [PATCH 1/3] m68k: add amcore board support   Angelo Dureghello
• [U-Boot] [PATCH 2/3] m68k: add mcf5307 cpu support   Angelo Dureghello
• [U-Boot] [PATCH 3/3] m68k: add generic-board support   Angelo Dureghello
• [U-Boot] [RFC] m68k: generic board   Angelo Dureghello
• [U-Boot] Secure boot on imx28   Dusautois, Jerome
• [U-Boot] [Q] SPL uses uImage load address as entry point   Phil Edworthy
• [U-Boot] [Q] Why does SPL use uImage load address as entry point?   Phil Edworthy
• [U-Boot] [PATCH] mtd, omap: fix case NAND_OMAP_GPMC_PREFETCH not defined   Samuel Egli
• [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Luca Ellero
• [U-Boot] [PATCH v2] mtd: nand: mxs: fix PIO_WORD number   Luca Ellero
• [U-Boot] [PATCH v2] mtd: nand: mxs: fix PIO_WORD number   Luca Ellero
• [U-Boot] btrfs?   Johannes Ernst
• [U-Boot] [PATCH] mx53loco: Fix boot hang during reboot stress test   Fabio Estevam
• [U-Boot] [PATCH 07/12] imx:mx6 Support LDO bypass   Fabio Estevam
• [U-Boot] relocation on freescale mx35 doesn't work after update to 2015.01   Fabio Estevam
• [U-Boot] [PATCH v2 3/3] imx:mx6slevk implement power init board   Fabio Estevam
• [U-Boot] i.MX28 u-boot SPL fail   Fabio Estevam
• [U-Boot] Unused video drivers   Fabio Estevam
• [U-Boot] i.MX28 u-boot SPL fail   Fabio Estevam
• [U-Boot] i.MX28 u-boot SPL fail   Fabio Estevam
• [U-Boot] Fwd: i.MX28 u-boot SPL fail   Fabio Estevam
• [U-Boot] i.MX28 u-boot SPL fail   Fabio Estevam
• [U-Boot] Message rejected. No base64 encoded MIME text parts allowed.   Fabio Estevam
• [U-Boot] [PATCH 1/2] mc34704: Add the definition of ONOFFA bit   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx25pdk: Turn on the LCD supply   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] mc34704: Add the definition of ONOFFA bit   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] mx25pdk: Turn on the LCD supply   Fabio Estevam
• [U-Boot] [PATCH 1/3] mx31ads: Convert to generic board   Fabio Estevam
• [U-Boot] [PATCH 2/3] imx31_phycore: Convert to generic board   Fabio Estevam
• [U-Boot] [PATCH 3/3] zmx25: Convert to generic board   Fabio Estevam
• [U-Boot] [PATCH v4 0/9] ARM: remove non-generic boards   Fabio Estevam
• [U-Boot] [PATCH 1/2] mx31: Fix boot hang by avoiding vector relocation   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx35: Fix boot hang by avoiding vector relocation   Fabio Estevam
• [U-Boot] How to program u-boot in eMMC/MMC on iMX   Fabio Estevam
• [U-Boot] [PATCH v4 4/9] ARM: remove zmx25 board support   Fabio Estevam
• [U-Boot] [PATCH v4 1/9] ARM: remove mx31ads board support   Fabio Estevam
• [U-Boot] [PATCH v4 1/9] ARM: remove mx31ads board support   Fabio Estevam
• [U-Boot] [PATCH] mx6sabre: Enable USB Mass Storage   Fabio Estevam
• [U-Boot] UMS on mx6sl   Fabio Estevam
• [U-Boot] UMS on mx6sl   Fabio Estevam
• [U-Boot] UMS on mx6sl   Fabio Estevam
• [U-Boot] UMS on mx6sl   Fabio Estevam
• [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support   Fabio Estevam
• [U-Boot] [PATCH 2/2] warp: Select BOUNCE_BUFFER and CMD_EXT options   Fabio Estevam
• [U-Boot] [PATCH] cmd_usb_mass_storage: Remove extra 'ums' string in the usage text   Fabio Estevam
• [U-Boot] UMS on mx6sl   Fabio Estevam
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   Fabio Estevam
• [U-Boot] [PATCH] spl_mem_init.c : Added support for mDDR in SPL for i.MX28   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] mx6sabre: Enable User Mass Storage   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] mx6sabre: Select BOUNCE_BUFFER and CMD_EXT options   Fabio Estevam
• [U-Boot] [PATCH v3 1/2] mx6sabre: Enable User Mass Storage   Fabio Estevam
• [U-Boot] [PATCH v3 2/2] mx6sabre: Select CMD_EXT4 options   Fabio Estevam
• [U-Boot] dfu_get_buf: Could not memalign 0x2000000 bytes   Fabio Estevam
• [U-Boot] dfu_get_buf: Could not memalign 0x2000000 bytes   Fabio Estevam
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   Fabio Estevam
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   Fabio Estevam
• [U-Boot] [PATCH] cmd_usb_mass_storage: Remove extra 'ums' string in the usage text   Fabio Estevam
• [U-Boot] [PATCH] mx6slevk: Provide a proper pad configuration for OTG1_ID pin   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] cmd_usb_mass_storage: Remove extra 'ums' string in the usage text   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] cmd_usb_mass_storage: Use 'USB Mass Storage' in the help text   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] warp: Add USB Mass Storage support   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] warp: Select BOUNCE_BUFFER and CMD_EXT options   Fabio Estevam
• [U-Boot] [PATCH] ARM: HYP/non-sec: relocation before enable secondary cores   Peng Fan
• [U-Boot] [PATCH 6/6] imx:mx6sxsabresd board spl support   Peng Fan
• [U-Boot] [PATCH v3 1/4] dm: introduce dev_get_addr interface   Peng Fan
• [U-Boot] [PATCH v4 0/3] dm:gpio:mxc add DT support   Peng Fan
• [U-Boot] [PATCH v4 1/3] dm: introduce dev_get_addr interface   Peng Fan
• [U-Boot] [PATCH v4 2/3] dm:gpio:mxc add a bank_index entry in platdata   Peng Fan
• [U-Boot] [PATCH v4 3/3] dm:gpio:mxc add DT support   Peng Fan
• [U-Boot] [PATCH v5 2/3] pmic:pfuze implement pmic_mode_init   Peng Fan
• [U-Boot] [PATCH v5 3/3] imx:mx6 set normal APS and standby PFM mode   Peng Fan
• [U-Boot] [PATCH 06/12] pmic:pfuze add macro for setting voltage   Peng Fan
• [U-Boot] [PATCH 04/12] imx:mx6 update mxc_ccm_reg   Peng Fan
• [U-Boot] [PATCH] ARM: imx6 Add WDOG3 for i.MX6SX   Peng Fan
• [U-Boot] [PATCH 4/4] imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO board   Peng Fan
• [U-Boot] [PATCH v2 0/3] imx: mx6slevk add pmic support   Peng Fan
• [U-Boot] [PATCH v2 1/3] imx:mx6sl add I2C pad settings   Peng Fan
• [U-Boot] [PATCH v2 2/3] imx:mx6slevk add pmic and i2c configuration   Peng Fan
• [U-Boot] [PATCH v2 3/3] imx:mx6slevk implement power init board   Peng Fan
• [U-Boot] [PATCH v3 0/3] imx: mx6slevk add pmic support   Peng Fan
• [U-Boot] [PATCH v3 1/3] imx:mx6sl add I2c pad settings   Peng Fan
• [U-Boot] [PATCH v3 2/3] imx:mx6slevk add pmic and i2c configuration   Peng Fan
• [U-Boot] [PATCH v3 3/3] imx:mx6slevk implement power init board   Peng Fan
• [U-Boot] [PATCH v2 3/3] imx:mx6slevk implement power init board   Peng Fan
• [U-Boot] [PATCH] ARM: HYP/non-sec: relocation before enable secondary cores   Peng Fan
• [U-Boot] [PATCH v2] armv8/vexpress64: make multientry conditional   FengHua
• [U-Boot] [PATCH] ARMv8: Bug fix of dcache_disable()   FengHua
• [U-Boot] [PATCH] ARMv8: Bug fix of dcache_disable()   FengHua
• [U-Boot] [PATCH] tools: imagetool: Remove "INSERT BEFORE" from linker script   Guilherme Ferreira
• [U-Boot] recent tools on FreeBSD   Guilherme Maciel Ferreira
• [U-Boot] recent tools on FreeBSD   Guilherme Maciel Ferreira
• [U-Boot] [RFC PATCH] tools/imagetool: remove linker generated list   Guilherme Maciel Ferreira
• [U-Boot] [PATCH v1] fastboot: add support for reboot-bootloader command   Alexey Firago
• [U-Boot] [PATCH v1] fastboot: add support for reboot-bootloader command   Alexey Firago
• [U-Boot] [PATCH v2] fastboot: add support for reboot-bootloader command   Alexey Firago
• [U-Boot] [PATCH v3] fastboot: add support for reboot-bootloader command   Alexey Firago
• [U-Boot] MIPS UHI spec   Matthew Fortune
• [U-Boot] MACB TX timeout   Jason Fu
• [U-Boot] [PATCH] Exynos: Clock: Fix exynos5_get_periph_rate for I2C.   Guillaume GARDET
• [U-Boot] [PATCH 0/1] Adding Support for the BAV335x boards.   Gilles Gameiro
• [U-Boot] [PATCH] Adding Support for BAV335x boards   Gilles Gameiro
• [U-Boot] [PATCH v3 9/9] ARM: davinci: remove hawkboard support   Sughosh Ganu
• [U-Boot] Git clone using http or rsync broken   Guillaume Gardet
• [U-Boot] Git clone using http or rsync broken   Guillaume Gardet
• [U-Boot] 2015.04-rc2 tarball is missing from FTP   Guillaume Gardet
• [U-Boot] checkarmreloc error for AArch64 (using vexpress_aemv8a_defconfig)   Guillaume Gardet
• [U-Boot] Bad colors on BMP display on LCD   Guillaume Gardet
• [U-Boot] [PATCH RFC v2 0/6] usb: host: Add driver model support   Vivek Gautam
• [U-Boot] [PATCH RFC 1/6] usb: Rename usb_submit_int_msg() API to usb_int_msg()   Vivek Gautam
• [U-Boot] [PATCH RFC 2/6] dm: usb: Make necessary changes in framework for driver model   Vivek Gautam
• [U-Boot] [PATCH RFC 3/6] dm: usb-host: Add UCLASS driver for USB   Vivek Gautam
• [U-Boot] [PATCH RFC 4/6] dm: usb-host: Add support for driver model in o/e/xhci.   Vivek Gautam
• [U-Boot] [PATCH RFC 5/6] arm: exynos5: Enable EHCI and XHCI hcds through device tree.   Vivek Gautam
• [U-Boot] [PATCH RFC 6/6] configs: smdk5250: Enable using XHCI and EHCI together   Vivek Gautam
• [U-Boot] [PATCH RFC v2 0/6] usb: host: Add driver model support   Vivek Gautam
• [U-Boot] [PATCH RFC v2 0/6] usb: host: Add driver model support   Vivek Gautam
• [U-Boot] [RFC PATCH 0/7] RFC: dm: Add USB support   Vivek Gautam
• [U-Boot] [RFC PATCH 3/7] dm: usb: Adjust users of the USB stack to work with driver model   Vivek Gautam
• [U-Boot] 0001-Adding-Support-for-BAV335x-boards.patch   Gilles
• [U-Boot] 0001-Adding-Support-for-BAV335x-boards.patch   Gilles
• [U-Boot] 0001-Adding-Support-for-BAV335x-boards.patch   Gilles
• [U-Boot] Patch to add support for BAV335x boards   Gilles
• [U-Boot] [RFC PATCH 0/21] ARM: start to move SoC code into arch/arm/mach-*   Simon Glass
• [U-Boot] [RFC PATCH 0/21] ARM: start to move SoC code into arch/arm/mach-*   Simon Glass
• [U-Boot] [PATCH 13/13] lcd: split splash code into its own function   Simon Glass
• [U-Boot] [RFC PATCH v2 1/6] x86: Add header files for Intel Quark SoC defines   Simon Glass
• [U-Boot] [PATCH 1/4] sunxi: Make FEL mode usable again   Simon Glass
• [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Simon Glass
• [U-Boot] [RFC PATCH v2 2/6] x86: quark: Add routines to access message bus registers   Simon Glass
• [U-Boot] [RFC PATCH v2 3/6] x86: quark: Add Cache-As-RAM initialization   Simon Glass
• [U-Boot] [RFC PATCH v2 4/6] x86: Add basic Intel Quark processor support   Simon Glass
• [U-Boot] [RFC PATCH v2 5/6] x86: Add basic Intel Galileo board support   Simon Glass
• [U-Boot] [RFC PATCH v2 6/6] x86: Enable the Intel quark/galileo build   Simon Glass
• [U-Boot] [PATCH v2 0/26] tegra: Add eDP support for nyan-big   Simon Glass
• [U-Boot] [PATCH v2 01/26] dm: gpio: Add error handling and a function to claim vector GPIOs   Simon Glass
• [U-Boot] [PATCH v2 02/26] dm: tegra: config: Increase pre-reloc malloc() to 6KB   Simon Glass
• [U-Boot] [PATCH v2 03/26] fdt: Add binding decode function for display-timings   Simon Glass
• [U-Boot] [PATCH v2 04/26] tegra: Move the pww into tegra-common   Simon Glass
• [U-Boot] [PATCH v2 05/26] tegra: pwm: Allow the clock rate to be left as is   Simon Glass
• [U-Boot] [PATCH v2 06/26] tegra: Move checkboard() into the board code   Simon Glass
• [U-Boot] [PATCH v2 07/26] tegra: Add a board ID function   Simon Glass
• [U-Boot] [PATCH v2 08/26] power: Export register access functions from as3722   Simon Glass
• [U-Boot] [PATCH v2 09/26] tegra: Provide a function to allow LCD PMIC setup   Simon Glass
• [U-Boot] [PATCH v2 10/26] tegra: Add support for setting up a as3722 PMIC   Simon Glass
• [U-Boot] [PATCH v2 11/26] tegra: nyan-big: Add LCD PMIC init and board ID   Simon Glass
• [U-Boot] [PATCH v2 12/26] tegra124: dts: Add host1x node to provide display information   Simon Glass
• [U-Boot] [PATCH v2 13/26] tegra: config: Use CONFIG_LCD to detect LCD presence   Simon Glass
• [U-Boot] [PATCH v2 14/26] tegra: clock: Add checking for invalid clock IDs   Simon Glass
• [U-Boot] [PATCH v2 15/26] tegra: clock: Split the clock source code into a separate function   Simon Glass
• [U-Boot] [PATCH v2 16/26] tegra124: clock: Add display clocks and functions   Simon Glass
• [U-Boot] [PATCH v2 17/26] tegra: Move display controller header into common   Simon Glass
• [U-Boot] [PATCH v2 18/26] video: Add drm_dp_helper.h   Simon Glass
• [U-Boot] [PATCH v2 19/26] edid: Add a function to read detailed monitor timings   Simon Glass
• [U-Boot] [PATCH v2 20/26] dm: video: Add a uclass for display port   Simon Glass
• [U-Boot] [PATCH v2 21/26] tegra: dts: nyan-big: Add definitions for eDP display   Simon Glass
• [U-Boot] [PATCH v2 22/26] tegra: video: Support serial output resource (SOR) on tegra124   Simon Glass
• [U-Boot] [PATCH v2 23/26] tegra: video: Add Embedded DisplayPort driver   Simon Glass
• [U-Boot] [PATCH v2 24/26] tegra: video: support eDP displays on Tegra124 devices   Simon Glass
• [U-Boot] [PATCH v2 25/26] tegra: config: nyan-big: Enable LCD   Simon Glass
• [U-Boot] [PATCH v2 26/26] tegra124: video: Add full link training for eDP   Simon Glass
• [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Simon Glass
• [U-Boot] [PATCH 02/13] lcd: split configuration_get_cmap   Simon Glass
• [U-Boot] [PATCH 1/4] sunxi: Make FEL mode usable again   Simon Glass
• [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Simon Glass
• [U-Boot] [RFC PATCH v2 4/6] x86: Add basic Intel Quark processor support   Simon Glass
• [U-Boot] [PATCH 1/2] bootstage: Fix typos in the comment   Simon Glass
• [U-Boot] [RFC PATCH 6/7] arm: Show relocated PC/LR in the register dump   Simon Glass
• [U-Boot] [PATCH 0/3] arm: reduce .bss section clear time   Simon Glass
• [U-Boot] [PATCH v2] arm: spl: Allow board_init_r() to run with a larger stack   Simon Glass
• [U-Boot] [PATCH 1/4] sunxi: Make FEL mode usable again   Simon Glass
• [U-Boot] [PATCH 1/3] ARmv7: Add a soc_init hook to start.S   Simon Glass
• [U-Boot] [PATCH v2] arm: spl: Allow board_init_r() to run with a larger stack   Simon Glass
• [U-Boot] [PATCH v4 3/6] Exynos542x: Add and enable get_periph_rate support   Simon Glass
• [U-Boot] [PATCH v4 5/6] Exynos5: Use clock_get_periph_rate generic API   Simon Glass
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Simon Glass
• [U-Boot] [PATCH v2 1/5] microblaze: Move architecture to use generic board init   Simon Glass
• [U-Boot] [PATCH 2/2] x86: Use tab instead of space to indent in PCIE_ECAM_BASE   Simon Glass
• [U-Boot] Possible OMAP3 regression with current mainline   Simon Glass
• [U-Boot] [PATCH RFT v2] gpio: at91: Fix getting address of private data   Simon Glass
• [U-Boot] [PATCH] gpio: omap: Pass correct argument to _get_gpio_direction()   Simon Glass
• [U-Boot] [PATCH V3] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Simon Glass
• [U-Boot] Raspberry Pi GPIO interacts with u-boot   Simon Glass
• [U-Boot] Zynq Zybo booting with mainline U-Boot   Simon Glass
• [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Simon Glass
• [U-Boot] SPL DM   Simon Glass
• [U-Boot] [PATCH 1/3] dm: Prevent "demo hello" and "demo status" segfaults   Simon Glass
• [U-Boot] SPL DM   Simon Glass
• [U-Boot] [PATCH v2 1/5] microblaze: Move architecture to use generic board init   Simon Glass
• [U-Boot] [PATCH 1/2] cmd_fdt: Actually fix fdt command in sandbox   Simon Glass
• [U-Boot] [PATCH] RSA depends on DM   Simon Glass
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Simon Glass
• [U-Boot] [PATCH V3] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Simon Glass
• [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Simon Glass
• [U-Boot] [PATCH] RSA depends on DM   Simon Glass
• [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Simon Glass
• [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Simon Glass
• [U-Boot] [PATCH 1/5] arm: Use r2 instead of r0 in start.S   Simon Glass
• [U-Boot] [PATCH 2/5] arm: Allow reset init to be controlled   Simon Glass
• [U-Boot] [PATCH 3/5] arm: Allow lr to be saved by board code   Simon Glass
• [U-Boot] [PATCH 4/5] arm: spl: Provide for a board-specific loader   Simon Glass
• [U-Boot] [PATCH 5/5] RFC: sunxi: WIP FEL support   Simon Glass
• [U-Boot] [PATCH v2 02/11] Exynos542x: CPU: Power down all secondary cores   Simon Glass
• [U-Boot] [PATCH v2 11/11] Exynos: Fix L2 cache timings on Exynos5420 and Exynos5800   Simon Glass
• [U-Boot] [PATCH v5 6/7] Exynos: clock: change mask bits as per peripheral   Simon Glass
• [U-Boot] [RFC PATCH v3 1/7] x86: Add header files for Intel Quark SoC defines   Simon Glass
• [U-Boot] [RFC PATCH v3 3/7] x86: Define macros for pci configuration space access   Simon Glass
• [U-Boot] [RFC PATCH v3 4/7] x86: quark: Add Cache-As-RAM initialization   Simon Glass
• [U-Boot] [RFC PATCH v3 5/7] x86: Add basic Intel Quark processor support   Simon Glass
• [U-Boot] [RFC PATCH 1/9] x86: Allow overriding TSC_FREQ_IN_MHZ   Simon Glass
• [U-Boot] [RFC PATCH 2/9] x86: quark: Bypass TSC calibration   Simon Glass
• [U-Boot] [RFC PATCH 3/9] x86: quark: Add Memory Reference Code (MRC) main routines   Simon Glass
• [U-Boot] [RFC PATCH 4/9] x86: quark: Add utility codes needed for MRC   Simon Glass
• [U-Boot] [RFC PATCH 5/9] x86: quark: Add System Memory Controller support   Simon Glass
• [U-Boot] [RFC PATCH 6/9] x86: quark: Enable the Memory Reference Code build   Simon Glass
• [U-Boot] [RFC PATCH 7/9] fdtdec: Add compatible id and string for Intel Quark MRC   Simon Glass
• [U-Boot] [RFC PATCH 8/9] dt-bindings: Add Intel Quark MRC bindings   Simon Glass
• [U-Boot] [RFC PATCH 9/9] x86: quark: Call MRC in dram_init()   Simon Glass
• [U-Boot] x86: ACPI support suggestion   Simon Glass
• [U-Boot] [PATCH] RSA depends on DM   Simon Glass
• [U-Boot] [PATCH v2 1/2] cmd_fdt: Actually fix fdt command in sandbox   Simon Glass
• [U-Boot] [PATCH v2 2/2] cmd_fdt: Print the control fdt in terms of virtual memory   Simon Glass
• [U-Boot] [PATCH v2] omap3: add support for QUIPOS Cairo board.   Simon Glass
• [U-Boot] [PATCH 1/5] arm: Use r2 instead of r0 in start.S   Simon Glass
• [U-Boot] [PATCH 2/5] arm: Allow reset init to be controlled   Simon Glass
• [U-Boot] [PATCH 3/5] arm: Allow lr to be saved by board code   Simon Glass
• [U-Boot] [PATCH 5/5] RFC: sunxi: WIP FEL support   Simon Glass
• [U-Boot] [PATCH 1/3] ARmv7: Add a soc_init hook to start.S   Simon Glass
• [U-Boot] [PATCH 1/4] sunxi: dram: Un-inline dram helper functions   Simon Glass
• [U-Boot] [PATCH 2/4] malloc_simple: Allow malloc_simple to be used with non stack RAM   Simon Glass
• [U-Boot] [PATCH 3/4] malloc_simple: Return NULL on malloc failure rather then calling panic()   Simon Glass
• [U-Boot] [PATCH 4/4] sunxi: Switch to using malloc_simple for the spl   Simon Glass
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Simon Glass
• [U-Boot] [RFC PATCH 0/21] ARM: start to move SoC code into arch/arm/mach-*   Simon Glass
• [U-Boot] [PATCH] crypto/fsl - Add progressive hashing support using hardware acceleration.   Simon Glass
• [U-Boot] [PATCH] RSA depends on DM   Simon Glass
• [U-Boot] [PATCH 1/6] x86: quark: Initialize non-standard BARs   Simon Glass
• [U-Boot] [PATCH 2/6] x86: galileo: Add GPIO support   Simon Glass
• [U-Boot] [PATCH 3/6] x86: pci: Add pci ids for Quark SoC   Simon Glass
• [U-Boot] [PATCH 4/6] x86: Add SPI support to quark/galileo   Simon Glass
• [U-Boot] [PATCH 5/6] x86: Add SD/MMC support to quark/galileo   Simon Glass
• [U-Boot] [PATCH 6/6] x86: Add Intel Galileo instructions in README.x86   Simon Glass
• [U-Boot] recent tools on FreeBSD   Simon Glass
• [U-Boot] Loop Variable through to user space   Simon Glass
• [U-Boot] [PATCH 3/5] arm: Allow lr to be saved by board code   Simon Glass
• [U-Boot] [PATCH 1/3] ARmv7: Add a soc_init hook to start.S   Simon Glass
• [U-Boot] [PATCH 3/4] malloc_simple: Return NULL on malloc failure rather then calling panic()   Simon Glass
• [U-Boot] [PATCH 1/3] ARmv7: Add a soc_init hook to start.S   Simon Glass
• [U-Boot] [RFC PATCH v2 3/9] x86: quark: Add Memory Reference Code (MRC) main routines   Simon Glass
• [U-Boot] [RFC PATCH v2 4/9] x86: quark: Add utility codes needed for MRC   Simon Glass
• [U-Boot] [RFC PATCH v2 5/9] x86: quark: Add System Memory Controller support   Simon Glass
• [U-Boot] recent tools on FreeBSD   Simon Glass
• [U-Boot] [PATCH v7 2/4] DM: thermal: Add imx thermal DM driver   Simon Glass
• [U-Boot] [PATCH v2 0/19] dm: Convert boards to Kconfig for driver model   Simon Glass
• [U-Boot] [PATCH v2 01/19] dm: i2c: Add a dm_ prefix to driver model bus speed functions   Simon Glass
• [U-Boot] [PATCH v2 02/19] dm: i2c: Make API accessible even without CONFIG_DM   Simon Glass
• [U-Boot] [PATCH v2 03/19] dm: Add Kconfig for driver/demo   Simon Glass
• [U-Boot] [PATCH v2 04/19] dm: Expand and complete Kconfig in drivers/   Simon Glass
• [U-Boot] [PATCH v2 05/19] dm: Add Kconfig options for driver model SPL support   Simon Glass
• [U-Boot] [PATCH v2 06/19] dm: test: Add a Kconfig file   Simon Glass
• [U-Boot] [PATCH v2 07/19] dm: Add CMD_DM and CMD_DEMO to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 08/19] dm: Move Raspberry Pi driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 09/19] dm: exynos: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 10/19] dm: x86: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 11/19] dm: tegra: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 12/19] dm: at91: snapper: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 13/19] dm: omap3: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 14/19] dm: sandbox: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 15/19] dm: sunxi: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 16/19] dm: mx6: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 17/19] dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 18/19] dm: socfpga: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 19/19] dm: Drop unused driver model config_defaults   Simon Glass
• [U-Boot] [PATCH 0/6] buildman: Support comparison of CONFIG options between commits   Simon Glass
• [U-Boot] [PATCH 1/6] Create a .cfg file containing the CONFIG options used to build   Simon Glass
• [U-Boot] [PATCH 2/6] buildman: Add a space before the list of boards   Simon Glass
• [U-Boot] [PATCH 3/6] buildman: Show 'make' command line when -V is used   Simon Glass
• [U-Boot] [PATCH 4/6] buildman: Adjust the 'aborted' heuristic for writing output   Simon Glass
• [U-Boot] [PATCH 5/6] buildman: Store build config files   Simon Glass
• [U-Boot] [PATCH 6/6] buildman: Allow comparison of build configuration   Simon Glass
• [U-Boot] [PATCH v3 1/2] cmd_fdt: Actually fix fdt command in sandbox   Simon Glass
• [U-Boot] [PATCH v3 2/2] cmd_fdt: Print the control fdt in terms of virtual memory   Simon Glass
• [U-Boot] [RFC PATCH 6/9] x86: quark: Enable the Memory Reference Code build   Simon Glass
• [U-Boot] [RFC PATCH v2 9/9] x86: quark: Call MRC in dram_init()   Simon Glass
• [U-Boot] [PATCH][v2] crypto/fsl - Add progressive hashing support using hardware acceleration.   Simon Glass
• [U-Boot] [PATCH] cmd_i2c: quit I2C commands immediately on error   Simon Glass
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Simon Glass
• [U-Boot] [PATCH 5/5] RFC: sunxi: WIP FEL support   Simon Glass
• [U-Boot] [PATCH sunxi-tools] WIP: fel: Add a command for loading U-Boot SPL binaries in eGON format   Simon Glass
• [U-Boot] [PATCH v3 1/2] cmd_fdt: Actually fix fdt command in sandbox   Simon Glass
• [U-Boot] [PATCH v3 2/2] cmd_fdt: Print the control fdt in terms of virtual memory   Simon Glass
• [U-Boot] [PATCH v3 1/4] dm: introduce dev_get_addr interface   Simon Glass
• [U-Boot] [PATCH] image: Convert to use fdt_for_each_subnode macro   Simon Glass
• [U-Boot] [PATCH v2 11/22] x86: Move common FSP code into a common location   Simon Glass
• [U-Boot] [RFC PATCH v3 1/7] x86: Add header files for Intel Quark SoC defines   Simon Glass
• [U-Boot] [RFC PATCH v3 2/7] x86: quark: Add routines to access message bus registers   Simon Glass
• [U-Boot] [RFC PATCH v3 3/7] x86: Define macros for pci configuration space access   Simon Glass
• [U-Boot] [RFC PATCH v3 4/7] x86: quark: Add Cache-As-RAM initialization   Simon Glass
• [U-Boot] [RFC PATCH v3 5/7] x86: Add basic Intel Quark processor support   Simon Glass
• [U-Boot] [RFC PATCH v3 6/7] x86: Add basic Intel Galileo board support   Simon Glass
• [U-Boot] [RFC PATCH v3 7/7] x86: Enable the Intel quark/galileo build   Simon Glass
• [U-Boot] [RFC PATCH v2 1/9] x86: Allow overriding TSC_FREQ_IN_MHZ   Simon Glass
• [U-Boot] [RFC PATCH v2 2/9] x86: quark: Bypass TSC calibration   Simon Glass
• [U-Boot] [RFC PATCH v2 3/9] x86: quark: Add Memory Reference Code (MRC) main routines   Simon Glass
• [U-Boot] [RFC PATCH v2 4/9] x86: quark: Add utility codes needed for MRC   Simon Glass
• [U-Boot] [RFC PATCH v2 5/9] x86: quark: Add System Memory Controller support   Simon Glass
• [U-Boot] [RFC PATCH 6/9] x86: quark: Enable the Memory Reference Code build   Simon Glass
• [U-Boot] [RFC PATCH v2 7/9] fdtdec: Add compatible id and string for Intel Quark MRC   Simon Glass
• [U-Boot] [RFC PATCH v2 8/9] dt-bindings: Add Intel Quark MRC bindings   Simon Glass
• [U-Boot] [RFC PATCH v2 9/9] x86: quark: Call MRC in dram_init()   Simon Glass
• [U-Boot] [PATCH 1/6] x86: quark: Initialize non-standard BARs   Simon Glass
• [U-Boot] [PATCH 2/6] x86: galileo: Add GPIO support   Simon Glass
• [U-Boot] [PATCH 3/6] x86: pci: Add pci ids for Quark SoC   Simon Glass
• [U-Boot] [PATCH 4/6] x86: Add SPI support to quark/galileo   Simon Glass
• [U-Boot] [PATCH 5/6] x86: Add SD/MMC support to quark/galileo   Simon Glass
• [U-Boot] [PATCH 6/6] x86: Add Intel Galileo instructions in README.x86   Simon Glass
• [U-Boot] [PATCH 1/2] bootstage: Fix typos in the comment   Simon Glass
• [U-Boot] [PATCH 2/2] x86: Use tab instead of space to indent in PCIE_ECAM_BASE   Simon Glass
• [U-Boot] [PATCH v3 08/12] i2c: s3c24x0: reduce transmission status timeout   Simon Glass
• [U-Boot] recent tools on FreeBSD   Simon Glass
• [U-Boot] [PATCH] RSA depends on DM   Simon Glass
• [U-Boot] [PATCH 1/3] dm: Prevent "demo hello" and "demo status" segfaults   Simon Glass
• [U-Boot] [PATCH RFT v2] gpio: at91: Fix getting address of private data   Simon Glass
• [U-Boot] [PATCH] gpio: omap: Pass correct argument to _get_gpio_direction()   Simon Glass
• [U-Boot] [PATCH v3 08/12] i2c: s3c24x0: reduce transmission status timeout   Simon Glass
• [U-Boot] Samsung patches   Simon Glass
• [U-Boot] [PATCH][v2] crypto/fsl - Add progressive hashing support using hardware acceleration.   Simon Glass
• [U-Boot] x86: ACPI support suggestion   Simon Glass
• [U-Boot] x86: ACPI support suggestion   Simon Glass
• [U-Boot] [PATCH v2 18/19] dm: socfpga: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH] crypto/fsl - Add progressive hashing support using hardware acceleration.   Simon Glass
• [U-Boot] [PATCH v3 07/12] common/board_f: factor out reserve_stacks   Simon Glass
• [U-Boot] [PATCH v3 09/12] common/board_r: allocate bootparams   Simon Glass
• [U-Boot] [PATCH v3 10/12] avr32: add generic board support   Simon Glass
• [U-Boot] [RFC PATCH v2 1/8] net: Provide a function to get the current MAC address   Simon Glass
• [U-Boot] [RFC PATCH v2 2/8] net: Rename helper function to be more clear   Simon Glass
• [U-Boot] [RFC PATCH v2 3/8] net: Remove unneeded "extern" in net.h   Simon Glass
• [U-Boot] [RFC PATCH v2 4/8] net: Refactor in preparation for driver model   Simon Glass
• [U-Boot] [RFC PATCH v2 5/8] net: Add basic driver model support to Ethernet stack   Simon Glass
• [U-Boot] [RFC PATCH v2 6/8] net: Add network support to sandbox   Simon Glass
• [U-Boot] [RFC PATCH v2 7/8] net: Add ARP and PING response to sandbox driver   Simon Glass
• [U-Boot] [RFC PATCH v2 8/8] net: Add actual networking support to sandbox's driver   Simon Glass
• [U-Boot] [PATCH v2] image: Convert to use fdt_for_each_subnode macro   Simon Glass
• [U-Boot] recent tools on FreeBSD   Simon Glass
• [U-Boot] x86: ACPI support suggestion   Simon Glass
• [U-Boot] [PATCH v2 15/19] dm: sunxi: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] recent tools on FreeBSD   Simon Glass
• [U-Boot] [PATCHv1 13/22] arm: socfpga: spl: Add s_init   Simon Glass
• [U-Boot] recent tools on FreeBSD   Simon Glass
• [U-Boot] [PATCH v2 1/3] arm: Allow lr to be saved by board code   Simon Glass
• [U-Boot] [PATCH v2 2/3] arm: spl: Provide for a board-specific loader   Simon Glass
• [U-Boot] [PATCH v2 3/3] sunxi: Normalise FEL support   Simon Glass
• [U-Boot] [PATCH v2 3/3] sunxi: Normalise FEL support   Simon Glass
• [U-Boot] [PATCH v2 0/19] powerpc: Introduce device tree control and driver model   Simon Glass
• [U-Boot] [PATCH v2 01/19] Introduce board_init_f_mem() to handle early memory layout   Simon Glass
• [U-Boot] [PATCH v2 02/19] powerpc: Permit device tree control of U-Boot (CONFIG_OF_CONTROL)   Simon Glass
• [U-Boot] [PATCH v2 03/19] powerpc: ppc4xx: canyonlands: config: Tidy up CONFIGs and config.mk   Simon Glass
• [U-Boot] [PATCH v2 04/19] powerpc: ppc4xx: Move CANYONLANDS/GLACIER/ARCHES to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 05/19] powerpc: ppc4xx: Add ramboot config for glacier   Simon Glass
• [U-Boot] [PATCH v2 06/19] powerpc: ppc4xx: canyonlands: Move to generic board   Simon Glass
• [U-Boot] [PATCH v2 07/19] WIP: powerpc: ppc4xx: Somehow BSS is not cleared in RAMBOOT case   Simon Glass
• [U-Boot] [PATCH v2 08/19] powerpc: ppc4xx: dts: Bring in canyonlands device tree files   Simon Glass
• [U-Boot] [PATCH v2 09/19] powerpc: ppc4xx: Call board_init_f_mem() for generic board   Simon Glass
• [U-Boot] [PATCH v2 10/19] powerpc: ppc4xx: Add a gpio.h header file   Simon Glass
• [U-Boot] [PATCH v2 11/19] powerpc: ppc4xx: Allow the end of u-boot.bin to be found   Simon Glass
• [U-Boot] [PATCH v2 12/19] powerpc: ppc4xx: Use CONFIG_OF_CONTROL for canyonlands boards   Simon Glass
• [U-Boot] [PATCH v2 13/19] ppc: amcc: Omit unneeded ns16550 CONFIG if using driver model   Simon Glass
• [U-Boot] [PATCH v2 14/19] powerpc: Add serial driver for driver model   Simon Glass
• [U-Boot] [PATCH v2 15/19] dm: powerpc: ppc4xx: Move glacier to use driver model for serial   Simon Glass
• [U-Boot] [PATCH v2 16/19] powerpc: Add linkage.h file   Simon Glass
• [U-Boot] [PATCH v2 17/19] powerpc: ppc4xx: Change from OF_SEPARATE to OF_EMBED   Simon Glass
• [U-Boot] [PATCH v2 18/19] powerpc: ppc4xx: Add defaults for DT based booting to really work   Simon Glass
• [U-Boot] [PATCH v2 19/19] powerpc: ppc4xx: Enable CONFIG_DISPLAY_BOARDINFO   Simon Glass
• [U-Boot] [PATCH v2 0/19] powerpc: Introduce device tree control and driver model   Simon Glass
• [U-Boot] recent tools on FreeBSD   Simon Glass
• [U-Boot] Please pull u-boot-x86   Simon Glass
• [U-Boot] [PATCH v3 10/12] avr32: add generic board support   Simon Glass
• [U-Boot] [PATCH 1/2] dm: stv0991: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH 2/2] dm: mx6: sabre: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Simon Glass
• [U-Boot] [PATCH sunxi-tools v2 0/2] Support unified u-boot SPL for SD cards and FEL mode   Simon Glass
• [U-Boot] [PATCH v2 3/3] sunxi: Normalise FEL support   Simon Glass
• [U-Boot] [PATCH v2 13/19] dm: omap3: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 12/19] dm: at91: snapper: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [RFC PATCH 0/7] RFC: dm: Add USB support   Simon Glass
• [U-Boot] recent tools on FreeBSD   Simon Glass
• [U-Boot] [RFC PATCH] tools/imagetool: remove linker generated list   Simon Glass
• [U-Boot] [PATCH v1] tools/imagetool: remove linker script   Simon Glass
• [U-Boot] [PATCH 2/3] bcm2836 SoC support (used in Raspberry Pi 2 model B)   Simon Glass
• [U-Boot] sandbox on FreeBSD   Simon Glass
• [U-Boot] [PATCH v2 0/19] powerpc: Introduce device tree control and driver model   Simon Glass
• [U-Boot] [PATCH] sandbox: Return '-c command' exit value as sandbox exit code   Simon Glass
• [U-Boot] [PATCH 3/4] malloc_simple: Return NULL on malloc failure rather then calling panic()   Simon Glass
• [U-Boot] [PATCH v4 0/5] Clean out SPL and enable driver model   Simon Glass
• [U-Boot] [PATCH v4 1/5] arm: Reduce the scope of lowlevel_init()   Simon Glass
• [U-Boot] [PATCH v4 2/5] arm: spl: Avoid setting up a duplicate global data structure   Simon Glass
• [U-Boot] [PATCH v4 3/5] dm: tegra: Enable driver model in SPL and adjust the GPIO driver   Simon Glass
• [U-Boot] [PATCH v4 4/5] arm: spl: Allow board_init_r() to run with a larger stack   Simon Glass
• [U-Boot] [PATCH v4 5/5] Make export interface support CONFIG_SYS_MALLOC_SIMPLE   Simon Glass
• [U-Boot] [PATCH 1/3] ARmv7: Add a soc_init hook to start.S   Simon Glass
• [U-Boot] [PATCH v4 1/3] dm: introduce dev_get_addr interface   Simon Glass
• [U-Boot] [PATCH v4 2/3] dm:gpio:mxc add a bank_index entry in platdata   Simon Glass
• [U-Boot] [PATCH v4 3/3] dm:gpio:mxc add DT support   Simon Glass
• [U-Boot] [PATCH] sandbox: Adjust the order of the NO_SDL check   Simon Glass
• [U-Boot] [PATCH 1/6] x86: Support machines with >4GB of RAM   Simon Glass
• [U-Boot] [PATCH 2/6] x86: video: Allow keyboard presence to be controlled by device tree   Simon Glass
• [U-Boot] [PATCH 3/6] x86: spi: Add support for lynxpoint   Simon Glass
• [U-Boot] [PATCH 4/6] x86: Move common Chromebook config into a separate file   Simon Glass
• [U-Boot] [PATCH 5/6] x86: pci: Add PCI IDs for lynxpoint   Simon Glass
• [U-Boot] [PATCH 6/6] x86: Add support for panther (Asus Chromebox)   Simon Glass
• [U-Boot] Mainline U-Boot for MinnowBoard MAX   Simon Glass
• [U-Boot] [RFC PATCH v3 02/14] test: dm: Reorder the objects to build   Simon Glass
• [U-Boot] [RFC PATCH v3 01/14] dm: core: Allow seq numbers to be resolved before probe   Simon Glass
• [U-Boot] [PATCH v2 3/3] sunxi: Normalise FEL support   Simon Glass
• [U-Boot] [PATCH v3 0/25] tegra: Add eDP support for nyan-big   Simon Glass
• [U-Boot] [PATCH v3 01/25] dm: gpio: Add error handling and a function to claim vector GPIOs   Simon Glass
• [U-Boot] [PATCH v3 02/25] fdt: Add binding decode function for display-timings   Simon Glass
• [U-Boot] [PATCH v3 03/25] tegra: Move the pwm into tegra-common   Simon Glass
• [U-Boot] [PATCH v3 04/25] tegra: pwm: Allow the clock rate to be left as is   Simon Glass
• [U-Boot] [PATCH v3 05/25] tegra: Move checkboard() into the board code   Simon Glass
• [U-Boot] [PATCH v3 06/25] tegra: Add a board ID function   Simon Glass
• [U-Boot] [PATCH v3 07/25] power: Export register access functions from as3722   Simon Glass
• [U-Boot] [PATCH v3 08/25] tegra: Provide a function to allow LCD PMIC setup   Simon Glass
• [U-Boot] [PATCH v3 09/25] tegra: Add support for setting up a as3722 PMIC   Simon Glass
• [U-Boot] [PATCH v3 10/25] tegra: nyan-big: Add LCD PMIC init and board ID   Simon Glass
• [U-Boot] [PATCH v3 11/25] tegra124: dts: Add host1x node to provide display information   Simon Glass
• [U-Boot] [PATCH v3 12/25] tegra: config: Use CONFIG_LCD to detect LCD presence   Simon Glass
• [U-Boot] [PATCH v3 13/25] tegra: clock: Add checking for invalid clock IDs   Simon Glass
• [U-Boot] [PATCH v3 14/25] tegra: clock: Split the clock source code into a separate function   Simon Glass
• [U-Boot] [PATCH v3 15/25] tegra124: clock: Add display clocks and functions   Simon Glass
• [U-Boot] [PATCH v3 16/25] tegra: Move display controller header into common   Simon Glass
• [U-Boot] [PATCH v3 17/25] video: Add drm_dp_helper.h   Simon Glass
• [U-Boot] [PATCH v3 18/25] edid: Add a function to read detailed monitor timings   Simon Glass
• [U-Boot] [PATCH v3 19/25] dm: video: Add a uclass for display port   Simon Glass
• [U-Boot] [PATCH v3 20/25] tegra: dts: nyan-big: Add definitions for eDP display   Simon Glass
• [U-Boot] [PATCH v3 21/25] tegra: video: Support serial output resource (SOR) on tegra124   Simon Glass
• [U-Boot] [PATCH v3 22/25] tegra: video: Add Embedded DisplayPort driver   Simon Glass
• [U-Boot] [PATCH v3 23/25] tegra: video: support eDP displays on Tegra124 devices   Simon Glass
• [U-Boot] [PATCH v3 24/25] tegra: config: nyan-big: Enable LCD   Simon Glass
• [U-Boot] [PATCH v3 25/25] tegra124: video: Add full link training for eDP   Simon Glass
• [U-Boot] [PATCH v2 01/19] Introduce board_init_f_mem() to handle early memory layout   Simon Glass
• [U-Boot] [PATCH v2 02/19] powerpc: Permit device tree control of U-Boot (CONFIG_OF_CONTROL)   Simon Glass
• [U-Boot] [PATCH v2 03/19] powerpc: ppc4xx: canyonlands: config: Tidy up CONFIGs and config.mk   Simon Glass
• [U-Boot] [PATCH v2 04/19] powerpc: ppc4xx: Move CANYONLANDS/GLACIER/ARCHES to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 05/19] powerpc: ppc4xx: Add ramboot config for glacier   Simon Glass
• [U-Boot] [PATCH v2 06/19] powerpc: ppc4xx: canyonlands: Move to generic board   Simon Glass
• [U-Boot] [PATCH v2 08/19] powerpc: ppc4xx: dts: Bring in canyonlands device tree files   Simon Glass
• [U-Boot] [PATCH v2 09/19] powerpc: ppc4xx: Call board_init_f_mem() for generic board   Simon Glass
• [U-Boot] [PATCH v2 10/19] powerpc: ppc4xx: Add a gpio.h header file   Simon Glass
• [U-Boot] [PATCH v2 11/19] powerpc: ppc4xx: Allow the end of u-boot.bin to be found   Simon Glass
• [U-Boot] [PATCH v2 12/19] powerpc: ppc4xx: Use CONFIG_OF_CONTROL for canyonlands boards   Simon Glass
• [U-Boot] [PATCH v2 13/19] ppc: amcc: Omit unneeded ns16550 CONFIG if using driver model   Simon Glass
• [U-Boot] [PATCH v2 14/19] powerpc: Add serial driver for driver model   Simon Glass
• [U-Boot] [PATCH v2 15/19] dm: powerpc: ppc4xx: Move glacier to use driver model for serial   Simon Glass
• [U-Boot] [PATCH v2 16/19] powerpc: Add linkage.h file   Simon Glass
• [U-Boot] [PATCH v2 17/19] powerpc: ppc4xx: Change from OF_SEPARATE to OF_EMBED   Simon Glass
• [U-Boot] [PATCH v2 18/19] powerpc: ppc4xx: Add defaults for DT based booting to really work   Simon Glass
• [U-Boot] [PATCH v2 19/19] powerpc: ppc4xx: Enable CONFIG_DISPLAY_BOARDINFO   Simon Glass
• [U-Boot] [PATCH v3 03/12] net: Use new checksum functions   Simon Glass
• [U-Boot] [PATCH v2 01/19] dm: i2c: Add a dm_ prefix to driver model bus speed functions   Simon Glass
• [U-Boot] [PATCH v2 02/19] dm: i2c: Make API accessible even without CONFIG_DM   Simon Glass
• [U-Boot] [PATCH v2 03/19] dm: Add Kconfig for driver/demo   Simon Glass
• [U-Boot] [PATCH v2 04/19] dm: Expand and complete Kconfig in drivers/   Simon Glass
• [U-Boot] [PATCH v2 05/19] dm: Add Kconfig options for driver model SPL support   Simon Glass
• [U-Boot] [PATCH v2 06/19] dm: test: Add a Kconfig file   Simon Glass
• [U-Boot] [PATCH v2 07/19] dm: Add CMD_DM and CMD_DEMO to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 08/19] dm: Move Raspberry Pi driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 09/19] dm: exynos: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 10/19] dm: x86: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 11/19] dm: tegra: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 13/19] dm: omap3: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 14/19] dm: sandbox: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 15/19] dm: sunxi: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 16/19] dm: mx6: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v2 18/19] dm: socfpga: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v3 0/4] dm: Convert boards to Kconfig for driver model   Simon Glass
• [U-Boot] [PATCH v3 1/4] dm: at91: Drop use of ATMEL_PIO_PORTS in the header file   Simon Glass
• [U-Boot] [PATCH v3 2/4] dm: at91: snapper: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v3 3/4] dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig   Simon Glass
• [U-Boot] [PATCH v3 4/4] dm: Drop unused driver model config_defaults   Simon Glass
• [U-Boot] [PATCH v5] dm: sh: serial: Add support driver model   Simon Glass
• [U-Boot] [PATCH v5] dm: sh: serial: Add support driver model   Simon Glass
• [U-Boot] [PATCH v3 1/4] dm: at91: Drop use of ATMEL_PIO_PORTS in the header file   Simon Glass
• [U-Boot] [PATCH v3 2/4] dm: at91: snapper: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH v3 3/4] dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig   Simon Glass
• [U-Boot] [PATCH v3 4/4] dm: Drop unused driver model config_defaults   Simon Glass
• [U-Boot] [PATCH v4 1/3] dm: introduce dev_get_addr interface   Simon Glass
• [U-Boot] [PATCH v4 2/3] dm:gpio:mxc add a bank_index entry in platdata   Simon Glass
• [U-Boot] [PATCH v4 3/3] dm:gpio:mxc add DT support   Simon Glass
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Simon Glass
• [U-Boot] u-boot for Snow problem   Simon Glass
• [U-Boot] [PATCH v2 7/8] lpc32xx: add lpc32xx-spl.bin boot image target   Simon Glass
• [U-Boot] [PATCH v2 4/8] lpc32xx: add GPIO support   Simon Glass
• [U-Boot] [RFC PATCH v3 01/14] dm: core: Allow seq numbers to be resolved before probe   Simon Glass
• [U-Boot] [RFC PATCH v2 5/8] net: Add basic driver model support to Ethernet stack   Simon Glass
• [U-Boot] u-boot sunxi fel plan for v2015.04   Simon Glass
• [U-Boot] [PATCH v2 4/8] lpc32xx: add GPIO support   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] please pull u-boot-samsung master   Simon Glass
• [U-Boot] [PATCH 0/5] peach_pi: Add support for FIMD and DP   Simon Glass
• [U-Boot] Unused video drivers   Simon Glass
• [U-Boot] [PATCH 1/2] dm: stv0991: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH 2/2] dm: mx6: sabre: Move driver model CONFIGs to Kconfig   Simon Glass
• [U-Boot] [PATCH 1/3] dm: cros_ec: Convert to Kconfig   Simon Glass
• [U-Boot] [PATCH 2/3] dm: Move CONFIG_I2C_COMPAT to Kconfig   Simon Glass
• [U-Boot] [PATCH 3/3] dm: mx6: Adjust mx6sxsabresd to use Kconfig for DM_THERMAL   Simon Glass
• [U-Boot] [PATCH v3] imx6: Added DEK blob generator command   Simon Glass
• [U-Boot] u-boot sunxi fel plan for v2015.04   Simon Glass
• [U-Boot] [RFC PATCH v3 07/14] dm: eth: Add basic driver model support to Ethernet stack   Simon Glass
• [U-Boot] [RFC PATCH v3 08/14] dm: eth: Add network support to sandbox   Simon Glass
• [U-Boot] [RFC PATCH v3 09/14] dm: eth: Add ARP and PING response to sandbox driver   Simon Glass
• [U-Boot] [RFC PATCH v3 10/14] test: dm: eth: Add tests for the eth dm implementation   Simon Glass
• [U-Boot] [RFC PATCH v3 11/14] dm: eth: Add support for aliases   Simon Glass
• [U-Boot] [RFC PATCH v3 12/14] dm: eth: Add support for ethprime env var   Simon Glass
• [U-Boot] [RFC PATCH v3 13/14] dm: eth: Add testing for netretry env var   Simon Glass
• [U-Boot] [RFC PATCH v3 14/14] dm: eth: Add a bridge to a real network for sandbox   Simon Glass
• [U-Boot] [RFC PATCH v3 01/14] dm: core: Allow seq numbers to be resolved before probe   Simon Glass
• [U-Boot] [PATCH] buildman: allow multiple toolchains in a single path   Simon Glass
• [U-Boot] [PATCH] patman: Make dry-run output match real functionality   Simon Glass
• [U-Boot] [PATCH 1/2] buildman: Fix incorrect arguemnt in GetUpstream()   Simon Glass
• [U-Boot] [PATCH 2/2] patman: Read in the git-mailrc alias file   Simon Glass
• [U-Boot] [PATCH] buildman: allow multiple toolchains in a single path   Simon Glass
• [U-Boot] [PATCH] sandbox: Return '-c command' exit value as sandbox exit code   Simon Glass
• [U-Boot] [PATCH] sandbox: Adjust the order of the NO_SDL check   Simon Glass
• [U-Boot] Please pull u-boot-x86.git branch sandbox   Simon Glass
• [U-Boot] [PATCH v2 3/8] lpc32xx: i2c: add LPC32xx I2C interface support   Simon Glass
• [U-Boot] [PATCH V3 3/3] rpi: add support for Raspberry Pi 2 model B   Simon Glass
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Simon Glass
• [U-Boot] [PATCH 0/20] tegra: Expand Nyan-big support   Simon Glass
• [U-Boot] [PATCH 01/20] dm: spi: Avoid setting the speed with every transfer   Simon Glass
• [U-Boot] [PATCH 02/20] cros_ec: Show the protocol version in the debug message   Simon Glass
• [U-Boot] [PATCH 03/20] cros_ec: Handle the single duplex requirement in cros_ec   Simon Glass
• [U-Boot] [PATCH 04/20] tegra: Provide more accurate microsecond time   Simon Glass
• [U-Boot] [PATCH 05/20] tegra: cros_ec: Add tegra support for Chrome OS EC   Simon Glass
• [U-Boot] [PATCH 06/20] tegra: spi: Drop the claim_bus() method to correct delays   Simon Glass
• [U-Boot] [PATCH 07/20] dm: tegra: cros_ec: Enable Chrome OS EC on Nyan-big   Simon Glass
• [U-Boot] [PATCH 08/20] dm: gpio: Add an implementation for gpio_get_number()   Simon Glass
• [U-Boot] [PATCH 09/20] tegra: spi: Support slow SPI rates   Simon Glass
• [U-Boot] [PATCH 10/20] tegra: clock: Support enabling external clocks   Simon Glass
• [U-Boot] [PATCH 11/20] tegra: clock: Adjust PLL access to avoid a warning   Simon Glass
• [U-Boot] [PATCH 12/20] tegra: Introduce SRAM repair on tegra124   Simon Glass
• [U-Boot] [PATCH 13/20] tegra: Add missing tegra124 peripherals   Simon Glass
• [U-Boot] [PATCH 14/20] tegra: Increase maximum arguments to 32   Simon Glass
• [U-Boot] [PATCH 15/20] tegra: lcd: Tidy up clock init   Simon Glass
• [U-Boot] [PATCH 16/20] tegra: Allow board-specific init   Simon Glass
• [U-Boot] [PATCH 17/20] tegra: nyan-big: Add additional clock and kernel init   Simon Glass
• [U-Boot] [PATCH 18/20] Add Chrome OS config header   Simon Glass
• [U-Boot] [PATCH 19/20] tegra: config: Allow Chrome OS environment settings to be included   Simon Glass
• [U-Boot] [PATCH 20/20] tegra: config: nyan-big: Add options required by Chrome OS boot   Simon Glass
• [U-Boot] [PATCH 1/2] ARM: tegra: add function to clear pinmux CLAMPING bit   Simon Glass
• [U-Boot] u-boot for Snow problem   Simon Glass
• [U-Boot] [PATCH V3 3/3] rpi: add support for Raspberry Pi 2 model B   Simon Glass
• [U-Boot] [PATCH] Documentation: gpio: fix bindings document   Simon Glass
• [U-Boot] [PATCH v2 0/3] Add generic early debug UART feature   Simon Glass
• [U-Boot] [PATCH] x86: minnowmax: add GPIO mapping support   Simon Glass
• [U-Boot] [PATCH 06/12] pxa: colibri_pxa270: migrate to generic board   Simon Glass
• [U-Boot] [PATCH v2 1/8] exynos: config: enable arch memcpy and arch memset   Simon Glass
• [U-Boot] [PATCH v2 2/8] arm: relocation: clear .bss section with arch memset if defined   Simon Glass
• [U-Boot] [PATCH v2 3/8] dfu: mmc: file buffer: remove static allocation   Simon Glass
• [U-Boot] [PATCH v2 4/8] dlmalloc: add option for skip memset in malloc init   Simon Glass
• [U-Boot] [PATCH v2 5/8] README: add info about skip memset at malloc init   Simon Glass
• [U-Boot] [PATCH v2 6/8] kconfig: malloc: add option for skip memset at malloc init   Simon Glass
• [U-Boot] [PATCH v2 7/8] trats2: defconfig: enable expert and skip memset at malloc init   Simon Glass
• [U-Boot] [PATCH v2 8/8] odroid: defconfig: enable expert and skip malloc memset   Simon Glass
• [U-Boot] [PATCH 1/3] dm: cros_ec: Convert to Kconfig   Simon Glass
• [U-Boot] [PATCH 3/3] dm: mx6: Adjust mx6sxsabresd to use Kconfig for DM_THERMAL   Simon Glass
• [U-Boot] [PATCH 2/3] dm: Move CONFIG_I2C_COMPAT to Kconfig   Simon Glass
• [U-Boot] [PATCH] Documentation: gpio: fix bindings document   Simon Glass
• [U-Boot] [PATCH 2/4] apalis/colibri_t30: fix MMC/SD card detect GPIOs   Simon Glass
• [U-Boot] [PATCH 3/4] apalis_t30: enable gigabit ethernet via pcie   Simon Glass
• [U-Boot] [PATCH 11/14] usb: UniPhier: add UniPhier on-chip xHCI host driver support   Simon Glass
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Simon Glass
• [U-Boot] [PATCH 3/4] mmc: exynos dwmmc: check boot mode before init dwmmc   Simon Glass
• [U-Boot] [RFC PATCH v3 01/14] dm: core: Allow seq numbers to be resolved before probe   Simon Glass
• [U-Boot] [RFC PATCH v3 07/14] dm: eth: Add basic driver model support to Ethernet stack   Simon Glass
• [U-Boot] [RFC PATCH v3 09/14] dm: eth: Add ARP and PING response to sandbox driver   Simon Glass
• [U-Boot] [RFC PATCH v3 11/14] dm: eth: Add support for aliases   Simon Glass
• [U-Boot] [RFC PATCH v3 14/14] dm: eth: Add a bridge to a real network for sandbox   Simon Glass
• [U-Boot] Please pull u-boot-fdt   Simon Glass
• [U-Boot] [PATCH RFC v2 0/6] usb: host: Add driver model support   Simon Glass
• [U-Boot] [PATCH 0/22] Add driver model support for PCI   Simon Glass
• [U-Boot] [PATCH 01/22] dm: i2c: Add a missing memory allocaton check   Simon Glass
• [U-Boot] [PATCH 02/22] sandbox: Correct device tree 'reg' properties for I2C and SPI   Simon Glass
• [U-Boot] [PATCH 03/22] fdt: Export fdtdec_get_number() for general use   Simon Glass
• [U-Boot] [PATCH 04/22] x86: Add a x86_ prefix to the x86-specific PCI functions   Simon Glass
• [U-Boot] [PATCH 05/22] RFC: x86: Split up arch_cpu_init()   Simon Glass
• [U-Boot] [PATCH 06/22] Correct map_sysmem() logic in do_mem_mw()   Simon Glass
• [U-Boot] [PATCH 07/22] fdt: Tighten up error handling in fdtdec_get_pci_addr()   Simon Glass
• [U-Boot] [PATCH 08/22] dm: core: Add dev_get_uclass_priv() to access uclass private data   Simon Glass
• [U-Boot] [PATCH 09/22] dm: core: Mark device as active before calling its probe() method   Simon Glass
• [U-Boot] [PATCH 10/22] dm: core: Add a uclass pre_probe() method for devices   Simon Glass
• [U-Boot] [PATCH 11/22] dm: Show both allocated and requested seq numbers in 'dm uclass'   Simon Glass
• [U-Boot] [PATCH 12/22] dm: pci: Move common PCI functions into their own file   Simon Glass
• [U-Boot] [PATCH 13/22] dm: pci: Add a uclass for PCI   Simon Glass
• [U-Boot] [PATCH 14/22] dm: sandbox: pci: Add PCI support for sandbox   Simon Glass
• [U-Boot] [PATCH 15/22] dm: sandbox: Add a simple PCI driver   Simon Glass
• [U-Boot] [PATCH 16/22] dm: sandbox: pci: Add a PCI emulation uclass   Simon Glass
• [U-Boot] [PATCH 17/22] dm: sandbox: Add a emulated PCI device as an example   Simon Glass
• [U-Boot] [PATCH 18/22] dm: sandbox: pci: Enable PCI for sandbox   Simon Glass
• [U-Boot] [PATCH 19/22] dm: x86: pci: Add a PCI driver for driver model   Simon Glass
• [U-Boot] [PATCH 20/22] dm: x86: pci: Convert coreboot to use driver model for pci   Simon Glass
• [U-Boot] [PATCH 21/22] dm: x86: pci: Convert chromebook_link to use driver model for pci   Simon Glass
• [U-Boot] [PATCH 22/22] dm: pci: Add driver model tests for PCI   Simon Glass
• [U-Boot] [PATCH 1/2] dm: Protect device_unbind() with CONFIG_DM_DEVICE_REMOVE   Simon Glass
• [U-Boot] [PATCH 2/2] arm: socfpga: Enable DM for Cadence and DW SPI   Simon Glass
• [U-Boot] [PATCH v2 1/3] serial: Support an early UART for debugging   Simon Glass
• [U-Boot] [PATCH v2 2/3] serial: ns16550: Add access functions that don't need platdata   Simon Glass
• [U-Boot] [PATCH v2 3/3] serial: ns16550: Support debug UART   Simon Glass
• [U-Boot] [PATCH][v5] crypto/fsl - Add progressive hashing support using hardware acceleration.   Simon Glass
• [U-Boot] [PATCH v2 17/19] dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig   Simon Glass
• [U-Boot] [PATCH 1/2] dm: Correct default value for SYS_MALLOC_F   Simon Glass
• [U-Boot] [PATCH 2/2] kconfig: Adjust ordering so that defaults work as expected   Simon Glass
• [U-Boot] [PATCH 0/4] kconfig: turnaround into single .config   Simon Glass
• [U-Boot] [PATCH 2/4] malloc_f: fix broken .config caused by CONFIG_SYS_MALLOC_F   Simon Glass
• [U-Boot] [PATCH 1/2] dm: Protect device_unbind() with CONFIG_DM_DEVICE_REMOVE   Simon Glass
• [U-Boot] [PATCH 1/2] dm: Protect device_unbind() with CONFIG_DM_DEVICE_REMOVE   Simon Glass
• [U-Boot] [PATCH] arch/x86/cpu/quark/mrc.c: Switch to U_BOOT_DATE / U_BOOT_TIME   Simon Glass
• [U-Boot] [PATCH 1/2] dm: Protect device_unbind() with CONFIG_DM_DEVICE_REMOVE   Simon Glass
• [U-Boot] [PATCH 2/2] arm: socfpga: Enable DM for Cadence and DW SPI   Simon Glass
• [U-Boot] [PATCH v2 1/4] ARM: UniPhier: set CONFIG_SYS_MALLOC_F to the global default value   Simon Glass
• [U-Boot] [PATCH V2 1/2] ARM: tegra: add function to clear pinmux CLAMPING bit   Simon Glass
• [U-Boot] [PATCH v4] imx6: Added DEK blob generator command   Simon Glass
• [U-Boot] [PATCH v2 6/8] kconfig: malloc: add option for skip memset at malloc init   Simon Glass
• [U-Boot] [PATCH v2 2/8] arm: relocation: clear .bss section with arch memset if defined   Simon Glass
• [U-Boot] [PATCH 2/4] malloc_f: fix broken .config caused by CONFIG_SYS_MALLOC_F   Simon Glass
• [U-Boot] [PATCH 1/2] dm: Correct default value for SYS_MALLOC_F   Simon Glass
• [U-Boot] [PATCH 2/4] malloc_f: fix broken .config caused by CONFIG_SYS_MALLOC_F   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH v3 5/7] kconfig: switch to single .config configuration   Simon Glass
• [U-Boot] [PATCH v3 6/7] kconfig: remove unneeded dependency on !SPL_BUILD   Simon Glass
• [U-Boot] [PATCH v3 7/7] malloc_f: enable SYS_MALLOC_F by default if DM is on   Simon Glass
• [U-Boot] [PATCH 1/2] dm: Correct default value for SYS_MALLOC_F   Simon Glass
• [U-Boot] [PATCH v3 2/7] malloc_f: fix broken .config caused by CONFIG_SYS_MALLOC_F   Simon Glass
• [U-Boot] [PATCH v3 4/7] malloc_f: add ARCH_MALLOC_F_LEN to specify SoC-default malloc_f_len   Simon Glass
• [U-Boot] [PATCH 11/14] usb: UniPhier: add UniPhier on-chip xHCI host driver support   Simon Glass
• [U-Boot] [PATCH v3 6/7] kconfig: remove unneeded dependency on !SPL_BUILD   Simon Glass
• [U-Boot] [PATCH v2 3/4] kconfig: switch to single .config configuration   Simon Glass
• [U-Boot] [PATCH 1/2] dm: Correct default value for SYS_MALLOC_F   Simon Glass
• [U-Boot] [PATCH 1/6] sandbox: only do sandboxfs for hostfs interface   Simon Glass
• [U-Boot] [PATCH 2/6] sandbox: Add support for bootz   Simon Glass
• [U-Boot] [PATCH 3/6] sandbox: Implement host dev [device]   Simon Glass
• [U-Boot] [PATCH 4/6] config_distro_bootcmd.h: Add shared block definition for the host interface   Simon Glass
• [U-Boot] [PATCH 5/6] pxe: Ensure all memory access is to mapped memory   Simon Glass
• [U-Boot] [PATCH 6/6] sandbox: add config_distro_defaults and config_distro_bootcmd   Simon Glass
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Simon Glass
• [U-Boot] [PATCH 1/2] dm: Protect device_unbind() with CONFIG_DM_DEVICE_REMOVE   Simon Glass
• [U-Boot] [RFC PATCH v3 14/14] dm: eth: Add a bridge to a real network for sandbox   Simon Glass
• [U-Boot] [PATCH v3 6/7] kconfig: remove unneeded dependency on !SPL_BUILD   Simon Glass
• [U-Boot] [PATCH v2 3/4] kconfig: switch to single .config configuration   Simon Glass
• [U-Boot] Weird error message on buildman   Simon Glass
• [U-Boot] [PATCH v4 0/5] Clean out SPL and enable driver model   Simon Glass
• [U-Boot] [PATCH v3 6/7] kconfig: remove unneeded dependency on !SPL_BUILD   Simon Glass
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Simon Glass
• [U-Boot] [PATCH v4 4/6] dlmalloc: do memset in malloc init as new default config   Simon Glass
• [U-Boot] [PATCH v3 6/7] kconfig: remove unneeded dependency on !SPL_BUILD   Simon Glass
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Simon Glass
• [U-Boot] [PATCH 1/2] dm: i2c: add DM_I2C_REQ_ALIAS to make sequence number optional   Simon Glass
• [U-Boot] [PATCH][v6] crypto/fsl - Add progressive hashing support using hardware acceleration.   Simon Glass
• [U-Boot] [PATCH] rsa : Compile Modular Exponentiation files based on CONFIG_RSA_SOFTWARE_EXP   Simon Glass
• [U-Boot] [PATCH 1/2] dm: i2c: add DM_I2C_REQ_ALIAS to make sequence number optional   Simon Glass
• [U-Boot] [PATCH 0/16] x86: dm: Convert x86 to use driver model more fully   Simon Glass
• [U-Boot] [PATCH 01/16] dm: sf: Add driver model read/write/erase methods   Simon Glass
• [U-Boot] [PATCH 02/16] dm: x86: spi: Convert ICH SPI driver to driver model   Simon Glass
• [U-Boot] [PATCH 03/16] dm: x86: Add a uclass for a Platform Controller Hub   Simon Glass
• [U-Boot] [PATCH 04/16] dm: x86: Add a uclass for an Low Pin Count (LPC) device   Simon Glass
• [U-Boot] [PATCH 05/16] x86: chromebook_link: dts: Add PCH and LPC devices   Simon Glass
• [U-Boot] [PATCH 06/16] dm: cros_ec: Convert cros_ec LPC driver to driver model   Simon Glass
• [U-Boot] [PATCH 07/16] cros_ec: Reinit the cros_ec device when 'crosec init' is used   Simon Glass
• [U-Boot] [PATCH 08/16] cros_ec: Drop unused CONFIG_DM_CROS_EC   Simon Glass
• [U-Boot] [PATCH 09/16] sandbox: cros_ec: Drop unnecessary init   Simon Glass
• [U-Boot] [PATCH 10/16] x86: cros_ec: Drop unnecessary init   Simon Glass
• [U-Boot] [PATCH 11/16] exynos: cros_ec: Drop unnecessary init   Simon Glass
• [U-Boot] [PATCH 12/16] cros_ec: Remove unused cros_ec_board_init() function   Simon Glass
• [U-Boot] [PATCH 13/16] fdt: cros_ec: Drop compatible string in fdtdec   Simon Glass
• [U-Boot] [PATCH 14/16] fdt: Drop LPC compatible string in fdtdec   Simon Glass
• [U-Boot] [PATCH 15/16] cros_ec: exynos: Match up device tree with kernel version   Simon Glass
• [U-Boot] [PATCH 16/16] i8042: Add keyboard enable logic in kbd_reset()   Simon Glass
• [U-Boot] [PATCH] am33xx, spl, siemens: enable debug uart output again   Simon Glass
• [U-Boot] [PATCH] MAINTAINERS: add Driver Model repository information   Simon Glass
• [U-Boot] [PATCH v3 5/7] kconfig: switch to single .config configuration   Simon Glass
• [U-Boot] [PATCH 11/14] usb: UniPhier: add UniPhier on-chip xHCI host driver support   Simon Glass
• [U-Boot] [PATCH RFC v2 0/6] usb: host: Add driver model support   Simon Glass
• [U-Boot] [PATCH v2] tegra20: tamonten: Fix the early gpio init   Simon Glass
• [U-Boot] [PATCH 0/9] ARM: tegra: pinmux: Tegra210 support   Simon Glass
• [U-Boot] [PATCH 1/9] ARM: tegra: pinmux: add note re: drive group field defines   Simon Glass
• [U-Boot] [PATCH v2 0/3] Clean out SPL ready for driver model   Simon Glass
• [U-Boot] [PATCH v3 5/7] kconfig: switch to single .config configuration   Simon Glass
• [U-Boot] [PATCH v2 0/3] Clean out SPL ready for driver model   Simon Glass
• [U-Boot] [RFC PATCH v4 08/23] net: Use int instead of u8 for boolean flag   Simon Glass
• [U-Boot] [RFC PATCH v4 07/23] net: Change return codes from net/eth.c to use errorno constants   Simon Glass
• [U-Boot] [PATCH 0/9] ARM: tegra: pinmux: Tegra210 support   Simon Glass
• [U-Boot] [PATCH] stdio: extend "name" to 32 symbols   Simon Glass
• [U-Boot] [PATCH 1/6] x86: Support machines with >4GB of RAM   Simon Glass
• [U-Boot] [PATCH 05/22] RFC: x86: Split up arch_cpu_init()   Simon Glass
• [U-Boot] [PATCH 6/6] x86: Add support for panther (Asus Chromebox)   Simon Glass
• [U-Boot] [PATCH 1/9] ARM: tegra: pinmux: add note re: drive group field defines   Simon Glass
• [U-Boot] [PATCH] README: remove description about driver model configuration options   Simon Glass
• [U-Boot] [PATCH v2 0/3] Clean out SPL ready for driver model   Simon Glass
• [U-Boot] [PATCH v2 0/3] Clean out SPL ready for driver model   Simon Glass
• [U-Boot] [PATCH v5 0/5] Clean out SPL and enable driver model   Simon Glass
• [U-Boot] [PATCH v5 1/5] arm: Reduce the scope of lowlevel_init()   Simon Glass
• [U-Boot] [PATCH v5 2/5] arm: spl: Avoid setting up a duplicate global data structure   Simon Glass
• [U-Boot] [PATCH v5 3/5] dm: tegra: Enable driver model in SPL and adjust the GPIO driver   Simon Glass
• [U-Boot] [PATCH v5 4/5] arm: spl: Allow board_init_r() to run with a larger stack   Simon Glass
• [U-Boot] [PATCH v5 5/5] Make export interface support CONFIG_SYS_MALLOC_SIMPLE   Simon Glass
• [U-Boot] [PATCH 0/29] dm: Introduce device tree support in SPL (for Rockchip)   Simon Glass
• [U-Boot] [PATCH 01/29] serial: ns16550: Add an option to specify the debug UART register shift   Simon Glass
• [U-Boot] [PATCH 02/29] dm: ns16550: Support non-byte register spacing with driver model   Simon Glass
• [U-Boot] [PATCH 03/29] dm: ns16550: Support CONFIG_SYS_NS16550_MEM32 with driver model   Simon Glass
• [U-Boot] [PATCH 04/29] serial: ns16550: Remove unnecessary init on UART setup   Simon Glass
• [U-Boot] [PATCH 05/29] fdt: arm: Drop device tree padding   Simon Glass
• [U-Boot] [PATCH 06/29] dm: core: Allow sequence alias support to be removed for SPL   Simon Glass
• [U-Boot] [PATCH 07/29] dm: core: Remove unbind operations when not required   Simon Glass
• [U-Boot] [PATCH 08/29] dm: Add a panic_str() function to reduce code size   Simon Glass
• [U-Boot] [PATCH 09/29] dm: core: Drop device removal error path when not supported   Simon Glass
• [U-Boot] [PATCH 10/29] fdt: sandbox: Move setup code from board_f to fdtdec   Simon Glass
• [U-Boot] [PATCH 11/29] fdt: Rename setup_fdt() and make it prepare also   Simon Glass
• [U-Boot] [PATCH 12/29] Move initf_malloc() to a common place   Simon Glass
• [U-Boot] [PATCH 13/29] Correct malloc_limit value for pre-relocation malloc()   Simon Glass
• [U-Boot] [PATCH 14/29] fdt: Add an option to disable device tree in SPL   Simon Glass
• [U-Boot] [PATCH 15/29] dts: Disable device tree for SPL on all boards   Simon Glass
• [U-Boot] [PATCH 16/29] fdt: Allow FDT functions to be built for SPL   Simon Glass
• [U-Boot] [PATCH 17/29] dm: core: Select device tree control correctly for SPL   Simon Glass
• [U-Boot] [PATCH 18/29] dm: Init device tree as well as driver model in SPL   Simon Glass
• [U-Boot] [PATCH 19/29] dm: serial: Don't support CONFIG_CONS_INDEX with device tree   Simon Glass
• [U-Boot] [PATCH 20/29] Remove SPL undefine of CONFIG_OF_CONTROL   Simon Glass
• [U-Boot] [PATCH 21/29] fdt: arm: Build device tree in SPL   Simon Glass
• [U-Boot] [PATCH 22/29] dm: rockchip: Add serial support   Simon Glass
• [U-Boot] [PATCH 23/29] rockchip: Bring in RK3288 device tree file includes and bindings   Simon Glass
• [U-Boot] [PATCH 24/29] rockchip: dts: Adjust device tree files for U-Boot SPL   Simon Glass
• [U-Boot] [PATCH 25/29] rockchip: Add base SoC files   Simon Glass
• [U-Boot] [PATCH 26/29] rockchip: Add basic support for firefly-rk3288   Simon Glass
• [U-Boot] [PATCH 27/29] mkimage: Display a better list of available image types   Simon Glass
• [U-Boot] [PATCH 28/29] rockchip: Add the beginnings of an image tool   Simon Glass
• [U-Boot] [PATCH 29/29] rockchip: Add a simple README   Simon Glass
• [U-Boot] [PATCH] spl: fix calling "spl export .." more than once   Simon Glass
• [U-Boot] [PATCH 0/20] tegra: Expand Nyan-big support   Simon Glass
• [U-Boot] [PATCH 0/9] ARM: tegra: pinmux: Tegra210 support   Simon Glass
• [U-Boot] [PATCH 4/6] config_distro_bootcmd.h: Add shared block definition for the host interface   Simon Glass
• [U-Boot] [PATCH 5/6] pxe: Ensure all memory access is to mapped memory   Simon Glass
• [U-Boot] Problems booting Linux 3.18 on SH7785LCR   John Paul Adrian Glaubitz
• [U-Boot] Problems booting Linux 3.18 on SH7785LCR   John Paul Adrian Glaubitz
• [U-Boot] [PATCH 1/2] cmd_eeprom: make it possible to define the used i2c bus   Christian Gmeiner
• [U-Boot] [PATCH 2/2] ot1200: add eeprom command to non-SPL build   Christian Gmeiner
• [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Hans de Goede
• [U-Boot] [PATCH v3] sunxi: Add Linksprite_pcDuino3_Nano board / defconfig   Hans de Goede
• [U-Boot] [PATCH 3/3] sunxi: dram: Allow to configure vdd-dll voltage on sun[457]i   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [PATCH] video: sunxi: Enable cache for the framebuffer   Hans de Goede
• [U-Boot] [PATCH 1/2] sunxi: video: Do not use CONFIG_SYS_MEM_TOP_HIDE for the framebuffer   Hans de Goede
• [U-Boot] [PATCH 2/2] sunxi: video: Dynamically reserve framebuffer memory   Hans de Goede
• [U-Boot] [PATCH] sunxi: Ampe A76 support   Hans de Goede
• [U-Boot] [PATCH 1/2] sunxi: video: Do not use CONFIG_SYS_MEM_TOP_HIDE for the framebuffer   Hans de Goede
• [U-Boot] [PATCH] sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART   Hans de Goede
• [U-Boot] [PATCH] sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART   Hans de Goede
• [U-Boot] [PATCH 5/5] RFC: sunxi: WIP FEL support   Hans de Goede
• [U-Boot] [PATCH 0/4] sunxi: SPL size reduction patches   Hans de Goede
• [U-Boot] [PATCH 1/4] sunxi: dram: Un-inline dram helper functions   Hans de Goede
• [U-Boot] [PATCH 2/4] malloc_simple: Allow malloc_simple to be used with non stack RAM   Hans de Goede
• [U-Boot] [PATCH 3/4] malloc_simple: Return NULL on malloc failure rather then calling panic()   Hans de Goede
• [U-Boot] [PATCH 4/4] sunxi: Switch to using malloc_simple for the spl   Hans de Goede
• [U-Boot] [PATCH 1/3] ARmv7: Add a soc_init hook to start.S   Hans de Goede
• [U-Boot] [PATCH 5/5] RFC: sunxi: WIP FEL support   Hans de Goede
• [U-Boot] [PATCH 3/4] malloc_simple: Return NULL on malloc failure rather then calling panic()   Hans de Goede
• [U-Boot] [PATCH sunxi-tools] WIP: fel: Add a command for loading U-Boot SPL binaries in eGON format   Hans de Goede
• [U-Boot] [PATCH sunxi-tools] WIP: fel: Add a command for loading U-Boot SPL binaries in eGON format   Hans de Goede
• [U-Boot] [PATCH v2] config_distro_bootcmd.h: Enable CONFIG_CMD_PART   Hans de Goede
• [U-Boot] [PATCH v2] config_distro_bootcmd.h: Enable CONFIG_CMD_PART   Hans de Goede
• [U-Boot] [PATCH v2 3/3] sunxi: Normalise FEL support   Hans de Goede
• [U-Boot] [PATCH v2 3/3] sunxi: Normalise FEL support   Hans de Goede
• [U-Boot] [PATCH] Add linux/compiler-gcc5.h to fix builds with gcc5   Hans de Goede
• [U-Boot] [PATCH] Add linux/compiler-gcc5.h to fix builds with gcc5   Hans de Goede
• [U-Boot] [PATCH sunxi-tools v2 0/2] Support unified u-boot SPL for SD cards and FEL mode   Hans de Goede
• [U-Boot] [PATCH 17/17] sunxi: Hookup OTG USB controller support   Hans de Goede
• [U-Boot] [PATCH 3/3] sunxi: dram: Allow to configure vdd-dll voltage on sun[457]i   Hans de Goede
• [U-Boot] [PATCH] sunxi: otg: Fix peripheral mode   Hans de Goede
• [U-Boot] u-boot sunxi fel plan for v2015.04   Hans de Goede
• [U-Boot] [sunxi] [RFC/RFH] Adding mainline u-boot support for the Olimex A20-SOM-EVB   Hans de Goede
• [U-Boot] u-boot sunxi fel plan for v2015.04   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [PATCH] tools: mksunxiboot: Fix problems on big endian systems   Hans de Goede
• [U-Boot] [PATCH] sunxi: Support the FEL boot mode in the regular u-boot build   Hans de Goede
• [U-Boot] [PATCH 1/4] sunxi: video: Add support for LCD reset pin   Hans de Goede
• [U-Boot] [PATCH 2/4] sunxi: video: Add support for LCD panels which need to be configured via i2c   Hans de Goede
• [U-Boot] [PATCH 3/4] sunxi: video: Add support for tl059wv5c0 lcd panels   Hans de Goede
• [U-Boot] [PATCH 4/4] sunxi: musb: Check Vbus-det before enabling otg port power   Hans de Goede
• [U-Boot] [PATCH 3/4] sunxi: video: Add support for tl059wv5c0 lcd panels   Hans de Goede
• [U-Boot] [PATCH 3/4] sunxi: video: Add support for tl059wv5c0 lcd panels   Hans de Goede
• [U-Boot] [linux-sunxi] [UBOOT] Both Linux-Sunxi and Mainline Uboot have issues   Hans de Goede
• [U-Boot] [PATCH 0/4] kconfig: turnaround into single .config   Hans de Goede
• [U-Boot] [linux-sunxi] [UBOOT] Both Linux-Sunxi and Mainline Uboot have issues   Hans de Goede
• [U-Boot] [linux-sunxi] [UBOOT] Both Linux-Sunxi and Mainline Uboot have issues   Hans de Goede
• [U-Boot] [PATCH] sunxi: Fix sun5i mbus speed when booting old kernels   Hans de Goede
• [U-Boot] [PATCH 0/4] kconfig: turnaround into single .config   Hans de Goede
• [U-Boot] [PATCH 1/2] sunxi: mmc: Always declare High Capacity capability   Hans de Goede
• [U-Boot] [PATCH 2/2] sunxi: Add support for the UTOO P66 tablet   Hans de Goede
• [U-Boot] [PATCH 0/3] Boot from the bootable paritions   Hans de Goede
• [U-Boot] [PATCH] sunxi: Fix sun5i mbus speed when booting old kernels   Hans de Goede
• [U-Boot] [PATCH] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels   Hans de Goede
• [U-Boot] [PATCH] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels   Hans de Goede
• [U-Boot] [PATCH] sunxi: Set the /chosen/stdout-path fdt property for sunxi boards   Hans de Goede
• [U-Boot] [PATCH] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels   Hans de Goede
• [U-Boot] [PATCH] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels   Hans de Goede
• [U-Boot] [PATCH] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [PATCH 1/2] sunxi: mmc: Always declare High Capacity capability   Hans de Goede
• [U-Boot] [PATCH 1/2] sunxi: mmc: Always declare High Capacity capability   Hans de Goede
• [U-Boot] [linux-sunxi] [PATCH] sunxi: Make CONFIG_DRAM_TPR3 apply to sun[57]i   Hans de Goede
• [U-Boot] [PATCH] added defconfig for Jesurun Q5   Hans de Goede
• [U-Boot] [PATCH] added defconfig for Jesurun Q5   Hans de Goede
• [U-Boot] [PATCH 07/12] imx:mx6 Support LDO bypass   Robin Gong
• [U-Boot] [PATCH 07/12] imx:mx6 Support LDO bypass   Robin Gong
• [U-Boot] [PATCH 07/12] imx:mx6 Support LDO bypass   Robin Gong
• [U-Boot] [PATCH v4 3/3] dm:gpio:mxc add DT support   Igor Grinberg
• [U-Boot] [PATCH 2/2] mx6: Rework s_init to be spl_board_init() and gate_ungate_all_mx6_pfds()   Igor Grinberg
• [U-Boot] [PATCH] omap3: ARM Cortex-A8 errata workarounds config option   Igor Grinberg
• [U-Boot] [PATCH v2] omap3: Variant and revision checks for ARM Cortex-A8 errata workarounds   Igor Grinberg
• [U-Boot] [PATCH V2 8/9] configs: ti_omap3_common: Enable workaround for ARM errata 454179, 430973, 621766   Igor Grinberg
• [U-Boot] [PATCH] crypto/fsl - Add progressive hashing support using hardware acceleration.   Ruchika Gupta
• [U-Boot] [PATCH] imx6: Added DEK blob generator command   Ruchika Gupta
• [U-Boot] [PATCH v4] imx6: Added DEK blob generator command   Ruchika Gupta
• [U-Boot] Hang when enabling DCache on a iMX6 board   Anatolij Gustschin
• [U-Boot] [PATCH V2 00/13] common lcd refactor   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH 2/6] x86: video: Allow keyboard presence to be controlled by device tree   Anatolij Gustschin
• [U-Boot] relocation on freescale mx35 doesn't work after update to 2015.01   Anatolij Gustschin
• [U-Boot] [PATCH 2/3] imx31_phycore: Convert to generic board   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] mx31: Fix boot hang by avoiding vector relocation   Anatolij Gustschin
• [U-Boot] [PATCH v4 2/9] ARM: mx31: remove imx31_phycore board   Anatolij Gustschin
• [U-Boot] [PATCH 1/3] mx31ads: Convert to generic board   Anatolij Gustschin
• [U-Boot] [PATCH 07/12] imx:mx6 Support LDO bypass   Tim Harvey
• [U-Boot] [PATCH 07/12] imx:mx6 Support LDO bypass   Tim Harvey
• [U-Boot] [PATCH 07/12] imx:mx6 Support LDO bypass   Tim Harvey
• [U-Boot] [PATCH 07/12] imx:mx6 Support LDO bypass   Tim Harvey
• [U-Boot] [PATCH 07/12] imx:mx6 Support LDO bypass   Tim Harvey
• [U-Boot] [PATCH 07/12] imx:mx6 Support LDO bypass   Tim Harvey
• [U-Boot] How to have U-boot loading U-boot   Rob Herring
• [U-Boot] [PATCH 2/2] fastboot: add support for "oem format" command   Rob Herring
• [U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase   Rob Herring
• [U-Boot] [PATCH v1 1/2] fastboot: Add support to flash u-boot and MLO to QSPI   Rob Herring
• [U-Boot] [PATCH v1 1/1] fastboot: Update getvar command to get 'userdata' partition size   Rob Herring
• [U-Boot] [PATCH v1 2/2] fastboot: Add support in fastboot oem command to set QSPI as boot device   Rob Herring
• [U-Boot] [PATCH] gpt: support random UUIDs without setting environment variables   Rob Herring
• [U-Boot] [PATCH v1] fastboot: add support for reboot-bootloader command   Rob Herring
• [U-Boot] [PATCH 2/2] usb: invoke board specific USB cleanup interface   Rob Herring
• [U-Boot] [PATCH v2] fastboot: add support for reboot-bootloader command   Rob Herring
• [U-Boot] [PATCH v1 1/1] fastboot: Add support for flashing zImage   Rob Herring
• [U-Boot] [PATCH v1 1/1] fastboot: Update getvar command to get 'userdata' partition size   Rob Herring
• [U-Boot] [RFC PATCH v2 0/8] Add Driver Model support to network stack   Joe Hershberger
• [U-Boot] [RFC PATCH v2 1/8] net: Provide a function to get the current MAC address   Joe Hershberger
• [U-Boot] [RFC PATCH v2 2/8] net: Rename helper function to be more clear   Joe Hershberger
• [U-Boot] [RFC PATCH v2 3/8] net: Remove unneeded "extern" in net.h   Joe Hershberger
• [U-Boot] [RFC PATCH v2 4/8] net: Refactor in preparation for driver model   Joe Hershberger
• [U-Boot] [RFC PATCH v2 5/8] net: Add basic driver model support to Ethernet stack   Joe Hershberger
• [U-Boot] [RFC PATCH v2 6/8] net: Add network support to sandbox   Joe Hershberger
• [U-Boot] [RFC PATCH v2 7/8] net: Add ARP and PING response to sandbox driver   Joe Hershberger
• [U-Boot] [RFC PATCH v2 8/8] net: Add actual networking support to sandbox's driver   Joe Hershberger
• [U-Boot] [PATCH 1/2] cmd_fdt: Actually fix fdt command in sandbox   Joe Hershberger
• [U-Boot] [PATCH 2/2] cmd_fdt: Print the control fdt in terms of virtual memory   Joe Hershberger
• [U-Boot] [PATCH v2 1/2] cmd_fdt: Actually fix fdt command in sandbox   Joe Hershberger
• [U-Boot] [PATCH v2 2/2] cmd_fdt: Print the control fdt in terms of virtual memory   Joe Hershberger
• [U-Boot] [PATCH v3 1/2] cmd_fdt: Actually fix fdt command in sandbox   Joe Hershberger
• [U-Boot] [PATCH v3 2/2] cmd_fdt: Print the control fdt in terms of virtual memory   Joe Hershberger
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Joe Hershberger
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Joe Hershberger
• [U-Boot] [PATCH] sandbox: Return '-c command' exit value as sandbox exit code   Joe Hershberger
• [U-Boot] [RFC PATCH v3 0/14] Add Driver Model support to network stack   Joe Hershberger
• [U-Boot] [RFC PATCH v3 01/14] dm: core: Allow seq numbers to be resolved before probe   Joe Hershberger
• [U-Boot] [RFC PATCH v3 02/14] test: dm: Reorder the objects to build   Joe Hershberger
• [U-Boot] [RFC PATCH v3 03/14] net: Provide a function to get the current MAC address   Joe Hershberger
• [U-Boot] [RFC PATCH v3 04/14] net: Rename helper function to be more clear   Joe Hershberger
• [U-Boot] [RFC PATCH v3 05/14] net: Remove unneeded "extern" in net.h   Joe Hershberger
• [U-Boot] [RFC PATCH v3 06/14] net: Refactor in preparation for driver model   Joe Hershberger
• [U-Boot] [RFC PATCH v3 07/14] dm: eth: Add basic driver model support to Ethernet stack   Joe Hershberger
• [U-Boot] [RFC PATCH v3 08/14] dm: eth: Add network support to sandbox   Joe Hershberger
• [U-Boot] [RFC PATCH v3 09/14] dm: eth: Add ARP and PING response to sandbox driver   Joe Hershberger
• [U-Boot] [RFC PATCH v3 10/14] test: dm: eth: Add tests for the eth dm implementation   Joe Hershberger
• [U-Boot] [RFC PATCH v3 11/14] dm: eth: Add support for aliases   Joe Hershberger
• [U-Boot] [RFC PATCH v3 12/14] dm: eth: Add support for ethprime env var   Joe Hershberger
• [U-Boot] [RFC PATCH v3 13/14] dm: eth: Add testing for netretry env var   Joe Hershberger
• [U-Boot] [RFC PATCH v3 14/14] dm: eth: Add a bridge to a real network for sandbox   Joe Hershberger
• [U-Boot] [RFC PATCH v3 01/14] dm: core: Allow seq numbers to be resolved before probe   Joe Hershberger
• [U-Boot] [RFC PATCH v2 5/8] net: Add basic driver model support to Ethernet stack   Joe Hershberger
• [U-Boot] [PATCH 2/2] net: phy: Add ability to program the ksz9031 skew values from the uboot env   Joe Hershberger
• [U-Boot] Can I load uEnv.txt conditionally, based on the boot source?   Joe Hershberger
• [U-Boot] Can I load uEnv.txt conditionally, based on the boot source?   Joe Hershberger
• [U-Boot] [PATCH] net: keystone_net: move serdes setup to initialization function   Joe Hershberger
• [U-Boot] [RFC PATCH v3 01/14] dm: core: Allow seq numbers to be resolved before probe   Joe Hershberger
• [U-Boot] [RFC PATCH v2 5/8] net: Add basic driver model support to Ethernet stack   Joe Hershberger
• [U-Boot] [RFC PATCH v3 01/14] dm: core: Allow seq numbers to be resolved before probe   Joe Hershberger
• [U-Boot] [RFC PATCH v3 07/14] dm: eth: Add basic driver model support to Ethernet stack   Joe Hershberger
• [U-Boot] [RFC PATCH v3 09/14] dm: eth: Add ARP and PING response to sandbox driver   Joe Hershberger
• [U-Boot] [RFC PATCH v3 11/14] dm: eth: Add support for aliases   Joe Hershberger
• [U-Boot] [RFC PATCH v3 14/14] dm: eth: Add a bridge to a real network for sandbox   Joe Hershberger
• [U-Boot] u-boot tftp problem   Joe Hershberger
• [U-Boot] [RFC PATCH v3 14/14] dm: eth: Add a bridge to a real network for sandbox   Joe Hershberger
• [U-Boot] u-boot tftp problem   Joe Hershberger
• [U-Boot] [RFC PATCH v4 0/23] Add Driver Model support to network stack   Joe Hershberger
• [U-Boot] [RFC PATCH v4 01/23] test: dm: Reorder the objects to build   Joe Hershberger
• [U-Boot] [RFC PATCH v4 02/23] common: Make sure arch-specific map_sysmem() is defined   Joe Hershberger
• [U-Boot] [RFC PATCH v4 03/23] net: Provide a function to get the current MAC address   Joe Hershberger
• [U-Boot] [RFC PATCH v4 04/23] net: Rename helper function to be more clear   Joe Hershberger
• [U-Boot] [RFC PATCH v4 05/23] net: Remove unneeded "extern" in net.h   Joe Hershberger
• [U-Boot] [RFC PATCH v4 06/23] net: Refactor in preparation for driver model   Joe Hershberger
• [U-Boot] [RFC PATCH v4 07/23] net: Change return codes from net/eth.c to use errorno constants   Joe Hershberger
• [U-Boot] [RFC PATCH v4 08/23] net: Use int instead of u8 for boolean flag   Joe Hershberger
• [U-Boot] [RFC PATCH v4 09/23] net: Remove the bd* parameter from net stack functions   Joe Hershberger
• [U-Boot] [RFC PATCH v4 10/23] net: Make netretry actually do something   Joe Hershberger
• [U-Boot] [RFC PATCH v4 11/23] net: Access mapped physmem in net functions   Joe Hershberger
• [U-Boot] [RFC PATCH v4 12/23] dm: eth: Add basic driver model support to Ethernet stack   Joe Hershberger
• [U-Boot] [RFC PATCH v4 13/23] sandbox: eth: Add network support to sandbox   Joe Hershberger
• [U-Boot] [RFC PATCH v4 14/23] sandbox: eth: Add ARP and PING response to sandbox driver   Joe Hershberger
• [U-Boot] [RFC PATCH v4 15/23] test: dm: eth: Add tests for the eth dm implementation   Joe Hershberger
• [U-Boot] [RFC PATCH v4 16/23] dm: eth: Add support for aliases   Joe Hershberger
• [U-Boot] [RFC PATCH v4 17/23] dm: eth: Add support for ethprime env var   Joe Hershberger
• [U-Boot] [RFC PATCH v4 18/23] test: dm: eth: Add testing for ethrotate env var   Joe Hershberger
• [U-Boot] [RFC PATCH v4 19/23] sandbox: eth: Add ability to disable ping reply in sandbox eth driver   Joe Hershberger
• [U-Boot] [RFC PATCH v4 20/23] test: dm: net: Add a test of the netretry behavior   Joe Hershberger
• [U-Boot] [RFC PATCH v4 21/23] sandbox: eth: Add a bridge to a real network for sandbox   Joe Hershberger
• [U-Boot] [RFC PATCH v4 22/23] sandbox: Enable DHCP and IP defrag   Joe Hershberger
• [U-Boot] [RFC PATCH v4 23/23] sandbox: eth: Add support for using the 'lo' interface   Joe Hershberger
• [U-Boot] [PATCH v4 03/10] Exynos542x: Add workaround for ARM errata 798870   Kevin Hilman
• [U-Boot] [PATCH v4 03/10] Exynos542x: Add workaround for ARM errata 798870   Kevin Hilman
• [U-Boot] Odroid XU3 - exynos5422 - SPL - iRAM/sRAM address   Kevin Hilman
• [U-Boot] recent tools on FreeBSD   Jeroen Hofstee
• [U-Boot] recent tools on FreeBSD   Jeroen Hofstee
• [U-Boot] recent tools on FreeBSD   Jeroen Hofstee
• [U-Boot] recent tools on FreeBSD   Jeroen Hofstee
• [U-Boot] recent tools on FreeBSD   Jeroen Hofstee
• [U-Boot] recent tools on FreeBSD   Jeroen Hofstee
• [U-Boot] [RFC PATCH] tools/imagetool: remove linker generated list   Jeroen Hofstee
• [U-Boot] recent tools on FreeBSD   Jeroen Hofstee
• [U-Boot] sandbox on FreeBSD   Jeroen Hofstee
• [U-Boot] [PATCH] sandbox: Adjust the order of the NO_SDL check   Jeroen Hofstee
• [U-Boot] x86: ACPI support suggestion   Gabriel Huau
• [U-Boot] x86: ACPI support suggestion   Gabriel Huau
• [U-Boot] x86: ACPI support suggestion   Gabriel Huau
• [U-Boot] x86: ACPI support suggestion   Gabriel Huau
• [U-Boot] [PATCH] x86: minnowmax: add GPIO mapping support   Gabriel Huau
• [U-Boot] [PATCH] x86: minnowmax: add GPIO mapping support   Gabriel Huau
• [U-Boot] [PATCH] x86: minnowmax: add GPIO mapping support   Gabriel Huau
• [U-Boot] [u-boot 00/40] dra7xx: am43xx: add dwc3 gadget driver support and enable dfu   Kishon Vijay Abraham I
• [U-Boot] [u-boot 01/40] ARM: DRA7: Enable clocks for USB OTGSS and USB PHY   Kishon Vijay Abraham I
• [U-Boot] [u-boot 02/40] ARM: AM43xx: Enable clocks for USB OTGSS and USB PHY   Kishon Vijay Abraham I
• [U-Boot] [u-boot 03/40] usb: gadget: udc: add udc-core from linux kernel to u-boot   Kishon Vijay Abraham I
• [U-Boot] [u-boot 04/40] include: usb: modify gadget.h to include udc support   Kishon Vijay Abraham I
• [U-Boot] [u-boot 05/40] usb: gadget: udc: make udc-core compile in u-boot build   Kishon Vijay Abraham I
• [U-Boot] [u-boot 06/40] include: asm: dma-mapping: get rid of the compilation warning in udc-core   Kishon Vijay Abraham I
• [U-Boot] [u-boot 07/40] usb: dwc3: add dwc3 folder from linux kernel to u-boot   Kishon Vijay Abraham I
• [U-Boot] [u-boot 08/40] usb: dwc3: remove un-used files from dwc3 folder   Kishon Vijay Abraham I
• [U-Boot] [u-boot 09/40] usb: dwc3: Modify the file headers to u-boot format   Kishon Vijay Abraham I
• [U-Boot] [u-boot 10/40] usb: dwc3: remove trace_* APIs from dwc3 driver   Kishon Vijay Abraham I
• [U-Boot] [u-boot 11/40] usb: dwc3: fix dwc3 header files   Kishon Vijay Abraham I
• [U-Boot] [u-boot 12/40] usb: dwc3: remove pm related operations from dwc3 driver   Kishon Vijay Abraham I
• [U-Boot] [u-boot 13/40] arm: asm: dma-mapping: added dma_free_coherent API   Kishon Vijay Abraham I
• [U-Boot] [u-boot 14/40] usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiy   Kishon Vijay Abraham I
• [U-Boot] [u-boot 15/40] usb: dwc3: gadget: make dwc3 gadget build in uboot   Kishon Vijay Abraham I
• [U-Boot] [u-boot 16/40] include: asm: types: add resource_size_t type   Kishon Vijay Abraham I
• [U-Boot] [u-boot 17/40] usb: dwc3: ep0: make dwc3 ep0 build in uboot   Kishon Vijay Abraham I
• [U-Boot] [u-boot 18/40] include: usb: composite: add USB_GADGET_DELAYED_STATUS to avoid compilation error   Kishon Vijay Abraham I
• [U-Boot] [u-boot 19/40] usb: dwc3: core: make dwc3 core build in uboot   Kishon Vijay Abraham I
• [U-Boot] [u-boot 20/40] include: dwc3-uboot: add a structure for populating platform data   Kishon Vijay Abraham I
• [U-Boot] [u-boot 21/40] dwc3: core: change probe and remove to uboot init and uboot exit code   Kishon Vijay Abraham I
• [U-Boot] [u-boot 22/40] dwc3: core: add support for multiple dwc3 controllers   Kishon Vijay Abraham I
• [U-Boot] [u-boot 23/40] dwc3: core: added an API to invoke irq handlers   Kishon Vijay Abraham I
• [U-Boot] [u-boot 24/40] usb: dwc3: dwc3-omap: make dwc3-omap build in uboot   Kishon Vijay Abraham I
• [U-Boot] [u-boot 25/40] include: dwc3-omap-uboot: add a structure for populating dwc3-omap platform data   Kishon Vijay Abraham I
• [U-Boot] [u-boot 26/40] usb: dwc3: dwc3-omap: change probe and remove to uboot init and uboot exit code   Kishon Vijay Abraham I
• [U-Boot] [u-boot 27/40] dwc3: dwc3-omap: add support for multiple dwc3-omap controllers   Kishon Vijay Abraham I
• [U-Boot] [u-boot 28/40] usb: dwc3: dwc3-omap: add interrupt status API to check for interrupts   Kishon Vijay Abraham I
• [U-Boot] [u-boot 29/40] usb: dwc3: TI PHY: PHY driver for dwc3 in TI platforms   Kishon Vijay Abraham I
• [U-Boot] [u-boot 30/40] dwc3: flush the buffers before using it   Kishon Vijay Abraham I
• [U-Boot] [u-boot 31/40] usb: dwc3: ep0: preparation for implementing chained TRB   Kishon Vijay Abraham I
• [U-Boot] [u-boot 32/40] usb: dwc3: Add chained TRB support for ep0   Kishon Vijay Abraham I
• [U-Boot] [u-boot 33/40] usb: dwc3: Makefile: Make dwc3 driver compile in u-boot   Kishon Vijay Abraham I
• [U-Boot] [u-boot 34/40] usb: gadget: defer setting maxpacket till ->setup()   Kishon Vijay Abraham I
• [U-Boot] [u-boot 35/40] common: cmd_dfu: invoke board_usb_cleanup() for cleaning up   Kishon Vijay Abraham I
• [U-Boot] [u-boot 36/40] board: ti: DRA7: added USB initializtion code   Kishon Vijay Abraham I
• [U-Boot] [u-boot 37/40] include: configs: Enable DWC3 and DFU in DRA7xx   Kishon Vijay Abraham I
• [U-Boot] [u-boot 38/40] board: ti: AM43xx: added USB initializtion code   Kishon Vijay Abraham I
• [U-Boot] [u-boot 39/40] include: configs: Enable DWC3 and DFU in AM43xx   Kishon Vijay Abraham I
• [U-Boot] [u-boot 40/40] usb: modify usb_gadget_handle_interrupts to take controller index   Kishon Vijay Abraham I
• [U-Boot] [u-boot 00/40] dra7xx: am43xx: add dwc3 gadget driver support and enable dfu   Kishon Vijay Abraham I
• [U-Boot] [u-boot 32/40] usb: dwc3: Add chained TRB support for ep0   Kishon Vijay Abraham I
• [U-Boot] [u-boot 32/40] usb: dwc3: Add chained TRB support for ep0   Kishon Vijay Abraham I
• [U-Boot] [u-boot 02/40] ARM: AM43xx: Enable clocks for USB OTGSS and USB PHY   Kishon Vijay Abraham I
• [U-Boot] [u-boot 14/40] usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiy   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 00/40] dra7xx: am43xx: add dwc3 gadget driver support and enable dfu   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 01/40] ARM: DRA7: Enable clocks for USB OTGSS and USB PHY   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 02/40] ARM: AM43xx: Enable clocks for USB OTGSS and USB PHY   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 03/40] usb: gadget: udc: add udc-core from linux kernel to u-boot   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 04/40] include: usb: modify gadget.h to include udc support   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 05/40] usb: gadget: udc: make udc-core compile in u-boot build   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 06/40] include: asm: dma-mapping: get rid of the compilation warning in udc-core   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 07/40] usb: dwc3: add dwc3 folder from linux kernel to u-boot   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 08/40] usb: dwc3: remove un-used files from dwc3 folder   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 09/40] usb: dwc3: Modify the file headers to u-boot format   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 10/40] usb: dwc3: remove trace_* APIs from dwc3 driver   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 11/40] usb: dwc3: fix dwc3 header files   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 12/40] usb: dwc3: remove pm related operations from dwc3 driver   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 13/40] arm: asm: dma-mapping: added dma_free_coherent API   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 14/40] usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiy   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 15/40] usb: dwc3: gadget: make dwc3 gadget build in uboot   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 16/40] include: asm: types: add resource_size_t type   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 17/40] usb: dwc3: ep0: make dwc3 ep0 build in uboot   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 18/40] include: usb: composite: add USB_GADGET_DELAYED_STATUS to avoid compilation error   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 19/40] usb: dwc3: core: make dwc3 core build in uboot   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 20/40] include: dwc3-uboot: add a structure for populating platform data   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 21/40] dwc3: core: change probe and remove to uboot init and uboot exit code   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 22/40] dwc3: core: add support for multiple dwc3 controllers   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 23/40] dwc3: core: added an API to invoke irq handlers   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 24/40] usb: dwc3: dwc3-omap: make dwc3-omap build in uboot   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 25/40] include: dwc3-omap-uboot: add a structure for populating dwc3-omap platform data   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 26/40] usb: dwc3: dwc3-omap: change probe and remove to uboot init and uboot exit code   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 27/40] dwc3: dwc3-omap: add support for multiple dwc3-omap controllers   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 28/40] usb: dwc3: dwc3-omap: add interrupt status API to check for interrupts   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 29/40] usb: dwc3: TI PHY: PHY driver for dwc3 in TI platforms   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 30/40] dwc3: flush the buffers before using it   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 31/40] usb: dwc3: ep0: preparation for implementing chained TRB   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 32/40] usb: dwc3: Add chained TRB support for ep0   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 33/40] usb: dwc3: Makefile: Make dwc3 driver compile in u-boot   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 34/40] usb: gadget: defer setting maxpacket till ->setup()   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 35/40] common: cmd_dfu: invoke board_usb_cleanup() for cleaning up   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 36/40] board: ti: DRA7: added USB initializtion code   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 37/40] include: configs: Enable DWC3 and DFU in DRA7xx   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 38/40] board: ti: AM43xx: added USB initializtion code   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 39/40] include: configs: Enable DWC3 and DFU in AM43xx   Kishon Vijay Abraham I
• [U-Boot] [u-boot PATCH v2 40/40] usb: modify usb_gadget_handle_interrupts to take controller index   Kishon Vijay Abraham I
• [U-Boot] [PATCH 02/11] usb: dwc3: linux-compat: Fix: Adding missing include files   Kishon Vijay Abraham I
• [U-Boot] [PATCH 04/11] usb: dwc3: make dwc3_set_mode to static   Kishon Vijay Abraham I
• [U-Boot] [PATCH 05/11] usb: dwc3: Set usbdrd phy ctrl and mode in dwc3 core   Kishon Vijay Abraham I
• [U-Boot] [PATCH 06/11] usb: dwc3: add a workaround for too small OUT requests   Kishon Vijay Abraham I
• [U-Boot] [u-boot RFC/RFT PATCH] usb: dwc3: remove linux-compat header file   Kishon Vijay Abraham I
• [U-Boot] [u-boot 14/40] usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiy   Kishon Vijay Abraham I
• [U-Boot] [PATCH 06/11] usb: dwc3: add a workaround for too small OUT requests   Kishon Vijay Abraham I
• [U-Boot] [PATCH v4] dm: sh: serial: Add support driver model   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] arm: rmobile: Add SILK board support   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] arm: rmobile: r8a7794: Enable SMP mode of Auxiliary Control Register   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] arm: rmobile: Add SILK board support   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] arm: rmobile: Add missed header file for Silk board   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] arm: rmobile: r8a7794: Enable SMP mode of Auxiliary Control Register   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] arm: rmobile: silk: Migrate serial driver to drivers model   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2] arm: rmobile: r8a7794: Enable SMP mode of Auxiliary Control Register   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] ARM: rmobile: silk: Remove initialization of ACTLR.SMP   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v5] dm: sh: serial: Add support driver model   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/4] arm: rmobile: alt: Add support SDHI   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/4] arm: rmobile: koelsch: Add support SDHI   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/4] arm: rmobile: gose: Add support SDHI   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/4] arm: rmobile: lager: Add support SDHI   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh/rmolbile   Nobuhiro Iwamatsu
• [U-Boot] [U-boot][PATCH] arm: rmobile: Add Porter board support   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/3] sh: rename some private libraries   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/3] sh: enable CONFIG_USE_PRIVATE_LIBGCC by default   Nobuhiro Iwamatsu
• [U-Boot] [U-boot][PATCH] serial: sh: fix internal clock source on SCIF   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] odroid: update link to X2/U3 proprietary binaries   Tobias Jakobi
• [U-Boot] [PATCH] odroid: update link to X2/U3 proprietary binaries   Tobias Jakobi
• [U-Boot] [PATCH] odroid: update link to X2/U3 proprietary binaries   Tobias Jakobi
• [U-Boot] [PATCH] mii: add read-modify-write option to mii command   Tim James
• [U-Boot] [PATCH] am43xx_evm: Add netboot and related to environment   Franklin S Cooper Jr
• [U-Boot] Samsung patches   Minkyu Kang
• [U-Boot] [PATCH v6 0/7] Exynos5: Fix warnings and enrich clock_get_periph_rate   Minkyu Kang
• [U-Boot] [PATCH] EXYNOS5: Add function to enable exynos5420 usbdev phy ctrl   Minkyu Kang
• [U-Boot] [PATCH] odroid: fix g2d sclk rate   Minkyu Kang
• [U-Boot] [PATCH v2 0/3] Support eMMC reset using DT for some exynos boards   Minkyu Kang
• [U-Boot] [PATCH] arm: exynos: fix the div value for set_mmc_clk   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH v2 07/11] Exynos542x: cache: Disable clean/evict push to external   Minkyu Kang
• [U-Boot] [PATCH v2 08/11] Exynos542x: add L2 control register configuration   Minkyu Kang
• [U-Boot] [PATCH 2/2] odroid: adjust get_dfu_alt_*() functions to new declarations   Minkyu Kang
• [U-Boot] [PATCH] Exynos: Clock: Fix exynos5_get_periph_rate for I2C.   Minkyu Kang
• [U-Boot] [PATCH v4 00/11] Add support for booting multiple cores   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [U-boot][PATCH] keystone2: add support for UART download   Murali Karicheri
• [U-Boot] [PATCH v1 1/1] fastboot: oem format command implementation   Dileep Katta
• [U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase   Dileep Katta
• [U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase   Dileep Katta
• [U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase   Dileep Katta
• [U-Boot] [PATCH v1 1/3] fastboot: OUT transaction length must be aligned to wMaxPacketSize   Dileep Katta
• [U-Boot] [PATCH v1 2/3] fastboot: Correct fastboot_fail and fastboot_okay strings   Dileep Katta
• [U-Boot] [PATCH v1 3/3] usb: gadget: fastboot: Set the Serial Number for Fastboot Gadget   Dileep Katta
• [U-Boot] [PATCH v2 1/3] fastboot: OUT transaction length must be aligned to wMaxPacketSize   Dileep Katta
• [U-Boot] [PATCH v3 1/3] fastboot: OUT transaction length must be aligned to wMaxPacketSize   Dileep Katta
• [U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase   Dileep Katta
• [U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase   Dileep Katta
• [U-Boot] [PATCH v2 1/1] usb: gadget: fastboot: Add fastboot erase   Dileep Katta
• [U-Boot] [PATCH v1 1/1] fastboot: Update getvar command to get 'userdata' partition size   Dileep Katta
• [U-Boot] [PATCH v1 1/2] fastboot: Add support to flash u-boot and MLO to QSPI   Dileep Katta
• [U-Boot] [PATCH v1 2/2] fastboot: Add support in fastboot oem command to set QSPI as boot device   Dileep Katta
• [U-Boot] [PATCH v2 1/1] usb: gadget: fastboot: Add fastboot erase   Dileep Katta
• [U-Boot] [PATCH v1 1/1] fastboot: Update getvar command to get 'userdata' partition size   Dileep Katta
• [U-Boot] [PATCH v1 1/1] fastboot: Add support for flashing zImage   Dileep Katta
• [U-Boot] [PATCH v1 1/2] fastboot: Add support to flash u-boot and MLO to QSPI   Dileep Katta
• [U-Boot] [PATCH 12/13] lcd: dt: extract simplefb support   Nikita Kiryanov
• [U-Boot] [PATCH 12/13] lcd: dt: extract simplefb support   Nikita Kiryanov
• [U-Boot] [PATCH 13/13] lcd: split splash code into its own function   Nikita Kiryanov
• [U-Boot] [PATCH 02/21] common/lcd: Add command for setting cursor within lcd-framework   Nikita Kiryanov
• [U-Boot] [PATCH 03/21] common/lcd: Add command for writing to lcd-display   Nikita Kiryanov
• [U-Boot] [PATCH 02/13] lcd: split configuration_get_cmap   Nikita Kiryanov
• [U-Boot] [PATCH V2 00/13] common lcd refactor   Nikita Kiryanov
• [U-Boot] [PATCH V2 01/13] lcd: move platform-specific structs to their own headers   Nikita Kiryanov
• [U-Boot] [PATCH V2 02/13] lcd: split configuration_get_cmap   Nikita Kiryanov
• [U-Boot] [PATCH V2 03/13] lcd: atmel: move atmel-specific fb_put_word to atmel_lcdfb   Nikita Kiryanov
• [U-Boot] [PATCH V2 04/13] lcd: mpc8xx: move mpc823-specific fb_put_byte to mpc8xx_lcd.c   Nikita Kiryanov
• [U-Boot] [PATCH V2 05/13] lcd: atmel: introduce lcd_logo_set_cmap   Nikita Kiryanov
• [U-Boot] [PATCH V2 06/13] lcd: mpc823: move mpc823-specific lcd_logo_set_cmap code to mpc8xx_lcd.c   Nikita Kiryanov
• [U-Boot] [PATCH V2 07/13] lcd: logo: move generic cmap setting to lcd_logo_set_cmap()   Nikita Kiryanov
• [U-Boot] [PATCH V2 08/13] lcd: introduce lcd_set_cmap   Nikita Kiryanov
• [U-Boot] [PATCH V2 09/13] lcd: remove unused includes   Nikita Kiryanov
• [U-Boot] [PATCH V2 10/13] lcd: various cleanups   Nikita Kiryanov
• [U-Boot] [PATCH V2 11/13] lcd: rename bitmap_plot to better represent its functionality   Nikita Kiryanov
• [U-Boot] [PATCH V2 12/13] lcd: dt: extract simplefb support   Nikita Kiryanov
• [U-Boot] [PATCH V2 13/13] lcd: split splash code into its own function   Nikita Kiryanov
• [U-Boot] [PATCH 02/21] common/lcd: Add command for setting cursor within lcd-framework   Nikita Kiryanov
• [U-Boot] [PATCH 03/21] common/lcd: Add command for writing to lcd-display   Nikita Kiryanov
• [U-Boot] [PATCH V2 02/13] lcd: split configuration_get_cmap   Nikita Kiryanov
• [U-Boot] Unused video drivers   Nikita Kiryanov
• [U-Boot] [PATCH] imx: save reset cause in 'reset_cause' environment variable   Troy Kisky
• [U-Boot] [PATCH] imx: don't clobber reset cause   Troy Kisky
• [U-Boot] [PATCH 2/4] mmc: fsl_esdhc: Add support to force VSELECT set   Troy Kisky
• [U-Boot] [PATCH 2/4] mmc: fsl_esdhc: Add support to force VSELECT set   Troy Kisky
• [U-Boot] [PATCH v1 0/4] Jetson-TK1 support for PSCI   Jan Kiszka
• [U-Boot] [PATCH 0/9] Add PSCI support for Jetson TK1/Tegra124   Jan Kiszka
• [U-Boot] [PATCH 1/9] ARM: Factor out reusable psci_cpu_off_common   Jan Kiszka
• [U-Boot] [PATCH 2/9] ARM: Factor out reusable psci_cpu_entry   Jan Kiszka
• [U-Boot] [PATCH 3/9] tegra124: Add more registers to struct mc_ctlr   Jan Kiszka
• [U-Boot] [PATCH 4/9] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Jan Kiszka
• [U-Boot] [PATCH 5/9] tegra: Make tegra_powergate_power_on public   Jan Kiszka
• [U-Boot] [PATCH 6/9] tegra: Add ap_pm_init hook   Jan Kiszka
• [U-Boot] [PATCH 7/9] tegra124: Add PSCI support for Tegra124   Jan Kiszka
• [U-Boot] [PATCH 8/9] jetson-tk1: Add PSCI configuration options and reserve secure code   Jan Kiszka
• [U-Boot] [PATCH 9/9] tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0   Jan Kiszka
• [U-Boot] [PATCH 2/9] ARM: Factor out reusable psci_cpu_entry   Jan Kiszka
• [U-Boot] [PATCH 2/9] ARM: Factor out reusable psci_cpu_entry   Jan Kiszka
• [U-Boot] [PATCH v2 00/12] Add PSCI support for Jetson TK1/Tegra124 + CNTFRQ fix   Jan Kiszka
• [U-Boot] [PATCH v2 01/12] ARM: Factor out reusable psci_cpu_off_common   Jan Kiszka
• [U-Boot] [PATCH v2 02/12] ARM: Factor out reusable psci_cpu_entry   Jan Kiszka
• [U-Boot] [PATCH v2 03/12] ARM: Factor out reusable psci_get_cpu_stack_top   Jan Kiszka
• [U-Boot] [PATCH v2 04/12] ARM: Put target PC for PSCI CPU_ON on per-CPU stack   Jan Kiszka
• [U-Boot] [PATCH v2 05/12] tegra124: Add more registers to struct mc_ctlr   Jan Kiszka
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Jan Kiszka
• [U-Boot] [PATCH v2 07/12] tegra: Make tegra_powergate_power_on public   Jan Kiszka
• [U-Boot] [PATCH v2 08/12] tegra: Add ap_pm_init hook   Jan Kiszka
• [U-Boot] [PATCH v2 09/12] tegra124: Add PSCI support for Tegra124   Jan Kiszka
• [U-Boot] [PATCH v2 10/12] jetson-tk1: Add PSCI configuration options and reserve secure code   Jan Kiszka
• [U-Boot] [PATCH v2 11/12] tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0   Jan Kiszka
• [U-Boot] [PATCH v2 12/12] tegra: Set CNTFRQ for secondary CPUs   Jan Kiszka
• [U-Boot] [PATCH v2 12/12] tegra: Set CNTFRQ for secondary CPUs   Jan Kiszka
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Jan Kiszka
• [U-Boot] [PATCH v2 11/12] tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0   Jan Kiszka
• [U-Boot] [PATCH v2 12/12] tegra: Set CNTFRQ for secondary CPUs   Jan Kiszka
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Jan Kiszka
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Jan Kiszka
• [U-Boot] [PATCH v2 12/12] tegra: Set CNTFRQ for secondary CPUs   Jan Kiszka
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Jan Kiszka
• [U-Boot] [PATCH v2 12/12] tegra: Set CNTFRQ for secondary CPUs   Jan Kiszka
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Jan Kiszka
• [U-Boot] [PATCH v2 09/12] tegra124: Add PSCI support for Tegra124   Jan Kiszka
• [U-Boot] [PATCH v2 11/12] tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0   Jan Kiszka
• [U-Boot] [PATCH v2 10/12] jetson-tk1: Add PSCI configuration options and reserve secure code   Jan Kiszka
• [U-Boot] [PATCH v3 00/12] Add PSCI support for Jetson TK1/Tegra124 + CNTFRQ fix   Jan Kiszka
• [U-Boot] [PATCH v3 01/12] ARM: Factor out reusable psci_cpu_off_common   Jan Kiszka
• [U-Boot] [PATCH v3 02/12] ARM: Factor out reusable psci_cpu_entry   Jan Kiszka
• [U-Boot] [PATCH v3 03/12] ARM: Factor out reusable psci_get_cpu_stack_top   Jan Kiszka
• [U-Boot] [PATCH v3 04/12] ARM: Put target PC for PSCI CPU_ON on per-CPU stack   Jan Kiszka
• [U-Boot] [PATCH v3 05/12] tegra124: Add more registers to struct mc_ctlr   Jan Kiszka
• [U-Boot] [PATCH v3 06/12] virt-dt: Allow reservation of secure region when in a RAM carveout   Jan Kiszka
• [U-Boot] [PATCH v3 07/12] tegra: Make tegra_powergate_power_on public   Jan Kiszka
• [U-Boot] [PATCH v3 08/12] tegra: Add ap_pm_init hook   Jan Kiszka
• [U-Boot] [PATCH v3 09/12] tegra124: Add PSCI support for Tegra124   Jan Kiszka
• [U-Boot] [PATCH v3 10/12] jetson-tk1: Add PSCI configuration options and reserve secure code   Jan Kiszka
• [U-Boot] [PATCH v3 11/12] tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0   Jan Kiszka
• [U-Boot] [PATCH v3 12/12] tegra: Set CNTFRQ for secondary CPUs   Jan Kiszka
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Jan Kiszka
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Jan Kiszka
• [U-Boot] [PATCH v2 09/12] tegra124: Add PSCI support for Tegra124   Jan Kiszka
• [U-Boot] [PATCH v2 09/12] tegra124: Add PSCI support for Tegra124   Jan Kiszka
• [U-Boot] [PATCH v2 09/12] tegra124: Add PSCI support for Tegra124   Jan Kiszka
• [U-Boot] [PATCH v3 09/12] tegra124: Add PSCI support for Tegra124   Jan Kiszka
• [U-Boot] [PATCH v4 00/14] Add PSCI support for Jetson TK1/Tegra124 + CNTFRQ fix   Jan Kiszka
• [U-Boot] [PATCH v4 01/14] sun7i: Remove duplicate call to psci_arch_init   Jan Kiszka
• [U-Boot] [PATCH v4 02/14] ARM: Factor out armv7_get_cpu_id macro   Jan Kiszka
• [U-Boot] [PATCH v4 03/14] ARM: Factor out reusable psci_cpu_off_common   Jan Kiszka
• [U-Boot] [PATCH v4 04/14] ARM: Factor out reusable psci_cpu_entry   Jan Kiszka
• [U-Boot] [PATCH v4 05/14] ARM: Factor out reusable psci_get_cpu_stack_top   Jan Kiszka
• [U-Boot] [PATCH v4 06/14] ARM: Put target PC for PSCI CPU_ON on per-CPU stack   Jan Kiszka
• [U-Boot] [PATCH v4 07/14] tegra124: Add more registers to struct mc_ctlr   Jan Kiszka
• [U-Boot] [PATCH v4 08/14] virt-dt: Allow reservation of secure region when in a RAM carveout   Jan Kiszka
• [U-Boot] [PATCH v4 09/14] tegra: Make tegra_powergate_power_on public   Jan Kiszka
• [U-Boot] [PATCH v4 10/14] tegra: Add ap_pm_init hook   Jan Kiszka
• [U-Boot] [PATCH v4 11/14] tegra124: Add PSCI support for Tegra124   Jan Kiszka
• [U-Boot] [PATCH v4 12/14] jetson-tk1: Add PSCI configuration options and reserve secure code   Jan Kiszka
• [U-Boot] [PATCH v4 13/14] tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0   Jan Kiszka
• [U-Boot] [PATCH v4 14/14] tegra: Set CNTFRQ for secondary CPUs   Jan Kiszka
• [U-Boot] [PATCH] sunxi: Ampe A76 support   Paul Kocialkowski
• [U-Boot] [PATCH] omap3: ARM Cortex-A8 errata workarounds config option   Paul Kocialkowski
• [U-Boot] [PATCH] omap3: ARM Cortex-A8 errata workarounds config option   Paul Kocialkowski
• [U-Boot] [PATCH] omap3: ARM Cortex-A8 errata workarounds config option   Paul Kocialkowski
• [U-Boot] [PATCH] omap3: ARM Cortex-A8 errata workarounds config option   Paul Kocialkowski
• [U-Boot] [PATCH v2] omap3: Variant and revision checks for ARM Cortex-A8 errata workarounds   Paul Kocialkowski
• [U-Boot] [PATCH v2] omap3: Variant and revision checks for ARM Cortex-A8 errata workarounds   Paul Kocialkowski
• [U-Boot] [PATCH] omap3: Variant and revision checks for ARM Cortex-A8 errata workarounds   Paul Kocialkowski
• [U-Boot] [PATCH] omap3: Variant and revision checks for ARM Cortex-A8 errata workarounds   Paul Kocialkowski
• [U-Boot] [PATCH] omap3: Variant and revision checks for ARM Cortex-A8 errata workarounds   Paul Kocialkowski
• [U-Boot] [PATCH V2 2/9] ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs   Paul Kocialkowski
• [U-Boot] [PATCH V2 3/9] ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1   Paul Kocialkowski
• [U-Boot] [PATCH V2 7/9] ARM: OMAP3: Introduce OMAP3 Cortex-A8 revision specific errata   Paul Kocialkowski
• [U-Boot] [PATCH V2 8/9] configs: ti_omap3_common: Enable workaround for ARM errata 454179, 430973, 621766   Paul Kocialkowski
• [U-Boot] [PATCH V2 8/9] configs: ti_omap3_common: Enable workaround for ARM errata 454179, 430973, 621766   Paul Kocialkowski
• [U-Boot] [PATCH V2 8/9] configs: ti_omap3_common: Enable workaround for ARM errata 454179, 430973, 621766   Paul Kocialkowski
• [U-Boot] [PATCH V2 8/9] configs: ti_omap3_common: Enable workaround for ARM errata 454179, 430973, 621766   Paul Kocialkowski
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Jörg Krause
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Jörg Krause
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Jörg Krause
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Jörg Krause
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Jörg Krause
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Jörg Krause
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Jörg Krause
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Jörg Krause
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Jörg Krause
• [U-Boot] [PATCH] RSA depends on DM   Chris Kuethe
• [U-Boot] [PATCH] RSA depends on DM   Chris Kuethe
• [U-Boot] [PATCH] RSA depends on DM   Chris Kuethe
• [U-Boot] [PATCH] RSA depends on DM   Chris Kuethe
• [U-Boot] [PATCH] arm: spear: Move to generic board support   Viresh Kumar
• [U-Boot] How to have U-boot loading U-boot   Jean-Christophe Lallemand
• [U-Boot] Question on the max size of SPL and OMAP3 SRAM   Adam Lee
• [U-Boot] omap_gpmc: Do not default to HAM1 when SW ECC is selected   Adam Lee
• [U-Boot] omap_gpmc: Do not default to HAM1 when SW ECC is selected   Adam Lee
• [U-Boot] omap_gpmc: Do not default to HAM1 when SW ECC is selected   Adam YH Lee
• [U-Boot] [PATCH 1/2] mx31: Fix boot hang by avoiding vector relocation   Magnus Lilja
• [U-Boot] [PATCH] image: Convert to use fdt_for_each_subnode macro   Axel Lin
• [U-Boot] [PATCH v2] image: Convert to use fdt_for_each_subnode macro   Axel Lin
• [U-Boot] spi: ftssp010_spi: Use to_ftssp010_spi() to ensure free correct address   Axel Lin
• [U-Boot] [PATCH 1/2] spi: cf_spi: Use to_cf_spi_slave to resolve cfslave from slave   Axel Lin
• [U-Boot] [PATCH 2/2] spi: cf_spi: Staticize local functions   Axel Lin
• [U-Boot] [PATCH] spi: designware_spi: revisit FIFO size detection again   Axel Lin
• [U-Boot] [PATCH] serial: ns16550: Fix build error due to a typo   Axel Lin
• [U-Boot] AM335x ChiliSOM support   Rostislav Lisovy
• [U-Boot] [PATCH v2 0/6] keymile: enhance IVM reading   Valentin Longchamp
• [U-Boot] [PATCH 5/5] KM/IVM: remove ivm_read_eeprom(void)   Valentin Longchamp
• [U-Boot] [PATCH v2 1/6] KM/IVM: split the IVM reading and parsing in 2 parts   Valentin Longchamp
• [U-Boot] [PATCH v2 2/6] kirkwood/km_arm: read the IVM eeprom earlier   Valentin Longchamp
• [U-Boot] [PATCH v2 3/6] 85xx/kmp204x: read the IVM eeprom earlier   Valentin Longchamp
• [U-Boot] [PATCH v2 4/6] 83xx/km83xx: read the IVM eeprom earlier   Valentin Longchamp
• [U-Boot] [PATCH v2 5/6] 82xx/km82xx: read the IVM eeprom earlier   Valentin Longchamp
• [U-Boot] [PATCH v2 6/6] KM/IVM: remove ivm_read_eeprom(void)   Valentin Longchamp
• [U-Boot] [PATCH v3 0/6] keymile: enhance IVM reading   Valentin Longchamp
• [U-Boot] [PATCH v3 1/6] KM/IVM: split the IVM reading and parsing in 2 parts   Valentin Longchamp
• [U-Boot] [PATCH v3 2/6] kirkwood/km_arm: read the IVM eeprom earlier   Valentin Longchamp
• [U-Boot] [PATCH v3 3/6] 85xx/kmp204x: read the IVM eeprom earlier   Valentin Longchamp
• [U-Boot] [PATCH v3 4/6] 83xx/km83xx: read the IVM eeprom earlier   Valentin Longchamp
• [U-Boot] [PATCH v3 5/6] 82xx/km82xx: read the IVM eeprom earlier   Valentin Longchamp
• [U-Boot] [PATCH v3 6/6] KM/IVM: remove ivm_read_eeprom(void)   Valentin Longchamp
• [U-Boot] [PATCHv1 01/22] arm: socfpga: spl: Add main sdram code   Pavel Machek
• [U-Boot] [PATCH V2 06/10] arm: socfpga: Zap checkboard()   Pavel Machek
• [U-Boot] [RFC PATCH 0/21] ARM: start to move SoC code into arch/arm/mach-*   Pavel Machek
• [U-Boot] [PATCH V2 08/10] arm: socfpga: Add Altera Arria V DK support   Pavel Machek
• [U-Boot] [PATCH V2 08/10] arm: socfpga: Add Altera Arria V DK support   Pavel Machek
• [U-Boot] [PATCHv1 01/22] arm: socfpga: spl: Add main sdram code   Pavel Machek
• [U-Boot] [PATCHv1 01/22] arm: socfpga: spl: Add main sdram code   Pavel Machek
• [U-Boot] [PATCHv1 07/22] arm: socfpga: spl: enable sdram, timer and uart   Pavel Machek
• [U-Boot] [PATCHv1 09/22] arm: socfpga: spl: allow bootrom to enable IOs after warm reset   Pavel Machek
• [U-Boot] [PATCHv1 10/22] arm: socfpga: spl: add sdram init and calibration   Pavel Machek
• [U-Boot] [PATCH] spi: designware_spi: revisit FIFO size detection again   Pavel Machek
• [U-Boot] [PATCH 2/4] usb: add 'bcm_udc_otg' support   Lukasz Majewski
• [U-Boot] [PATCH 0/3] arm: reduce .bss section clear time   Lukasz Majewski
• [U-Boot] [PATCH 3/5] dfu: nand: Verify writes   Lukasz Majewski
• [U-Boot] [PATCH 0/3] arm: reduce .bss section clear time   Lukasz Majewski
• [U-Boot] [u-boot 03/40] usb: gadget: udc: add udc-core from linux kernel to u-boot   Lukasz Majewski
• [U-Boot] [u-boot 01/40] ARM: DRA7: Enable clocks for USB OTGSS and USB PHY   Lukasz Majewski
• [U-Boot] [u-boot 02/40] ARM: AM43xx: Enable clocks for USB OTGSS and USB PHY   Lukasz Majewski
• [U-Boot] [u-boot 03/40] usb: gadget: udc: add udc-core from linux kernel to u-boot   Lukasz Majewski
• [U-Boot] [u-boot 04/40] include: usb: modify gadget.h to include udc support   Lukasz Majewski
• [U-Boot] [u-boot 05/40] usb: gadget: udc: make udc-core compile in u-boot build   Lukasz Majewski
• [U-Boot] [u-boot 06/40] include: asm: dma-mapping: get rid of the compilation warning in udc-core   Lukasz Majewski
• [U-Boot] [u-boot 07/40] usb: dwc3: add dwc3 folder from linux kernel to u-boot   Lukasz Majewski
• [U-Boot] [u-boot 08/40] usb: dwc3: remove un-used files from dwc3 folder   Lukasz Majewski
• [U-Boot] [u-boot 09/40] usb: dwc3: Modify the file headers to u-boot format   Lukasz Majewski
• [U-Boot] [u-boot 10/40] usb: dwc3: remove trace_* APIs from dwc3 driver   Lukasz Majewski
• [U-Boot] [u-boot 11/40] usb: dwc3: fix dwc3 header files   Lukasz Majewski
• [U-Boot] [u-boot 12/40] usb: dwc3: remove pm related operations from dwc3 driver   Lukasz Majewski
• [U-Boot] [u-boot 13/40] arm: asm: dma-mapping: added dma_free_coherent API   Lukasz Majewski
• [U-Boot] [u-boot 14/40] usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiy   Lukasz Majewski
• [U-Boot] [u-boot 15/40] usb: dwc3: gadget: make dwc3 gadget build in uboot   Lukasz Majewski
• [U-Boot] [u-boot 16/40] include: asm: types: add resource_size_t type   Lukasz Majewski
• [U-Boot] [u-boot 17/40] usb: dwc3: ep0: make dwc3 ep0 build in uboot   Lukasz Majewski
• [U-Boot] [u-boot 18/40] include: usb: composite: add USB_GADGET_DELAYED_STATUS to avoid compilation error   Lukasz Majewski
• [U-Boot] [u-boot 19/40] usb: dwc3: core: make dwc3 core build in uboot   Lukasz Majewski
• [U-Boot] [u-boot 20/40] include: dwc3-uboot: add a structure for populating platform data   Lukasz Majewski
• [U-Boot] [u-boot 21/40] dwc3: core: change probe and remove to uboot init and uboot exit code   Lukasz Majewski
• [U-Boot] [u-boot 22/40] dwc3: core: add support for multiple dwc3 controllers   Lukasz Majewski
• [U-Boot] [u-boot 23/40] dwc3: core: added an API to invoke irq handlers   Lukasz Majewski
• [U-Boot] [u-boot 24/40] usb: dwc3: dwc3-omap: make dwc3-omap build in uboot   Lukasz Majewski
• [U-Boot] [u-boot 25/40] include: dwc3-omap-uboot: add a structure for populating dwc3-omap platform data   Lukasz Majewski
• [U-Boot] [u-boot 26/40] usb: dwc3: dwc3-omap: change probe and remove to uboot init and uboot exit code   Lukasz Majewski
• [U-Boot] [u-boot 27/40] dwc3: dwc3-omap: add support for multiple dwc3-omap controllers   Lukasz Majewski
• [U-Boot] [u-boot 28/40] usb: dwc3: dwc3-omap: add interrupt status API to check for interrupts   Lukasz Majewski
• [U-Boot] [u-boot 29/40] usb: dwc3: TI PHY: PHY driver for dwc3 in TI platforms   Lukasz Majewski
• [U-Boot] [u-boot 30/40] dwc3: flush the buffers before using it   Lukasz Majewski
• [U-Boot] [u-boot 31/40] usb: dwc3: ep0: preparation for implementing chained TRB   Lukasz Majewski
• [U-Boot] [u-boot 32/40] usb: dwc3: Add chained TRB support for ep0   Lukasz Majewski
• [U-Boot] [u-boot 33/40] usb: dwc3: Makefile: Make dwc3 driver compile in u-boot   Lukasz Majewski
• [U-Boot] [u-boot 34/40] usb: gadget: defer setting maxpacket till ->setup()   Lukasz Majewski
• [U-Boot] [u-boot 35/40] common: cmd_dfu: invoke board_usb_cleanup() for cleaning up   Lukasz Majewski
• [U-Boot] [u-boot 36/40] board: ti: DRA7: added USB initializtion code   Lukasz Majewski
• [U-Boot] [u-boot 37/40] include: configs: Enable DWC3 and DFU in DRA7xx   Lukasz Majewski
• [U-Boot] [u-boot 38/40] board: ti: AM43xx: added USB initializtion code   Lukasz Majewski
• [U-Boot] [u-boot 39/40] include: configs: Enable DWC3 and DFU in AM43xx   Lukasz Majewski
• [U-Boot] [u-boot 40/40] usb: modify usb_gadget_handle_interrupts to take controller index   Lukasz Majewski
• [U-Boot] [u-boot 32/40] usb: dwc3: Add chained TRB support for ep0   Lukasz Majewski
• [U-Boot] [PATCH] tools: imagetool: Remove "INSERT BEFORE" from linker script   Lukasz Majewski
• [U-Boot] [PATCH] tools: imagetool: Remove "INSERT BEFORE" from linker script   Lukasz Majewski
• [U-Boot] [PATCH v3 02/11] Exynos542x: CPU: Power down all secondary cores   Lukasz Majewski
• [U-Boot] [PATCH 1/2] dfu: samsung: move call to set_dfu_alt_info() to dfu common code   Lukasz Majewski
• [U-Boot] [PATCH 2/2] odroid: adjust get_dfu_alt_*() functions to new declarations   Lukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu   Lukasz Majewski
• [U-Boot] [PATCH 00/11] usb: dwc3: Fixes and improvements for DWC3 driver   Lukasz Majewski
• [U-Boot] [PATCH 01/11] usb: composite: Add .reset callback to usb_gadget_driver structure   Lukasz Majewski
• [U-Boot] [PATCH 02/11] usb: dwc3: linux-compat: Fix: Adding missing include files   Lukasz Majewski
• [U-Boot] [PATCH 03/11] usb: dwc3: Add BIT() macro   Lukasz Majewski
• [U-Boot] [PATCH 04/11] usb: dwc3: make dwc3_set_mode to static   Lukasz Majewski
• [U-Boot] [PATCH 05/11] usb: dwc3: Set usbdrd phy ctrl and mode in dwc3 core   Lukasz Majewski
• [U-Boot] [PATCH 06/11] usb: dwc3: add a workaround for too small OUT requests   Lukasz Majewski
• [U-Boot] [PATCH 07/11] usb: dwc3: gadget: add common endpoint configuration for dwc3 udc driver   Lukasz Majewski
• [U-Boot] [PATCH 08/11] usb: dwc3: optimize interrupt loop   Lukasz Majewski
• [U-Boot] [PATCH 09/11] usb: dwc3: gadget: Set all ctrl fields of Transfer Control Blocks (TRB) to be LST   Lukasz Majewski
• [U-Boot] [PATCH 10/11] usb: dwc3: gadget: Set non EP0 max packet limit to 512B   Lukasz Majewski
• [U-Boot] [PATCH 11/11] usb: dwc3: Correct clean up code for requests   Lukasz Majewski
• [U-Boot] [PATCH 06/11] usb: dwc3: add a workaround for too small OUT requests   Lukasz Majewski
• [U-Boot] [u-boot PATCH v2 30/40] dwc3: flush the buffers before using it   Lukasz Majewski
• [U-Boot] [PATCH v2 1/1] usb: gadget: fastboot: Add fastboot erase   Lukasz Majewski
• [U-Boot] [PATCH] fastboot: Add USB cable detect check   Lukasz Majewski
• [U-Boot] [PATCH v3 1/3] fastboot: OUT transaction length must be aligned to wMaxPacketSize   Lukasz Majewski
• [U-Boot] [PATCH v1 2/3] fastboot: Correct fastboot_fail and fastboot_okay strings   Lukasz Majewski
• [U-Boot] [PATCH v1 3/3] usb: gadget: fastboot: Set the Serial Number for Fastboot Gadget   Lukasz Majewski
• [U-Boot] [PATCH v1 1/2] fastboot: Add support to flash u-boot and MLO to QSPI   Lukasz Majewski
• [U-Boot] [PATCH 1/2] usb: common: provide a _weak board_usb_cleanup() function   Lukasz Majewski
• [U-Boot] [PATCH 2/2] usb: invoke board specific USB cleanup interface   Lukasz Majewski
• [U-Boot] [PATCH v5 1/7] exynos: config: enable arch memcpy and arch memset   Lukasz Majewski
• [U-Boot] [PATCH v5 2/7] arm: relocation: clear .bss section with arch memset if defined   Lukasz Majewski
• [U-Boot] [PATCH v5 3/7] dfu: mmc: file buffer: remove static allocation   Lukasz Majewski
• [U-Boot] [PATCH v5 4/7] dlmalloc: do memset in malloc init as new default config   Lukasz Majewski
• [U-Boot] [PATCH v5 5/7] trats2: defconfig: disable memset at malloc init   Lukasz Majewski
• [U-Boot] [PATCH v5 6/7] odroid: defconfig: disable memset at malloc init   Lukasz Majewski
• [U-Boot] [PATCH v5 7/7] odroid-xu3: defconfig: disable memset at malloc init   Lukasz Majewski
• [U-Boot] [PATCH 1/2] usb: common: provide a _weak board_usb_cleanup() function   Lukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu   Lukasz Majewski
• [U-Boot] [u-boot 14/40] usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiy   Lukasz Majewski
• [U-Boot] [PATCH 1/2] usb: common: provide a _weak board_usb_cleanup() function   Lukasz Majewski
• [U-Boot] [u-boot 14/40] usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiy   Lukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu   Lukasz Majewski
• [U-Boot] [PATCH 1/2] usb: common: provide a _weak board_usb_cleanup() function   Lukasz Majewski
• [U-Boot] [PATCH v3] fastboot: add support for reboot-bootloader command   Lukasz Majewski
• [U-Boot] [PATCH] MAINTAINERS: Add F: drivers/usb/gadget to DFU custodian responsibility   Lukasz Majewski
• [U-Boot] [u-boot 14/40] usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiy   Lukasz Majewski
• [U-Boot] [PATCH] odroid: update link to X2/U3 proprietary binaries   Przemyslaw Marczak
• [U-Boot] [PATCH 0/3] arm: reduce .bss section clear time   Przemyslaw Marczak
• [U-Boot] [PATCH 0/3] arm: reduce .bss section clear time   Przemyslaw Marczak
• [U-Boot] [PATCH 2/3] arm: relocation: clear .bss section with arch memset if defined   Przemyslaw Marczak
• [U-Boot] [PATCH v2 0/8] arm: a few steps to reduce the boot time   Przemyslaw Marczak
• [U-Boot] [PATCH v2 1/8] exynos: config: enable arch memcpy and arch memset   Przemyslaw Marczak
• [U-Boot] [PATCH v2 2/8] arm: relocation: clear .bss section with arch memset if defined   Przemyslaw Marczak
• [U-Boot] [PATCH v2 3/8] dfu: mmc: file buffer: remove static allocation   Przemyslaw Marczak
• [U-Boot] [PATCH v2 4/8] dlmalloc: add option for skip memset in malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH v2 5/8] README: add info about skip memset at malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH v2 6/8] kconfig: malloc: add option for skip memset at malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH v2 7/8] trats2: defconfig: enable expert and skip memset at malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH v2 8/8] odroid: defconfig: enable expert and skip malloc memset   Przemyslaw Marczak
• [U-Boot] [PATCH v2 2/8] arm: relocation: clear .bss section with arch memset if defined   Przemyslaw Marczak
• [U-Boot] [PATCH 0/2] dfu: allow to autoset configuration   Przemyslaw Marczak
• [U-Boot] [PATCH 1/2] dfu: samsung: move call to set_dfu_alt_info() to dfu common code   Przemyslaw Marczak
• [U-Boot] [PATCH 2/2] odroid: adjust get_dfu_alt_*() functions to new declarations   Przemyslaw Marczak
• [U-Boot] [PATCH 0/4] exynos-dwmmc: check set init priority for boot channel   Przemyslaw Marczak
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Przemyslaw Marczak
• [U-Boot] [PATCH 2/4] s5p: gpio: add implementation of dm_gpio_set_pull()   Przemyslaw Marczak
• [U-Boot] [PATCH 3/4] mmc: exynos dwmmc: check boot mode before init dwmmc   Przemyslaw Marczak
• [U-Boot] [PATCH 4/4] mmc: print SD/eMMC type for inited mmc devices   Przemyslaw Marczak
• [U-Boot] [PATCH 0/3] samsung: board: reserve dram for the secure firmware   Przemyslaw Marczak
• [U-Boot] [PATCH 1/3] board: samsung: reserve memory for the secure firmware   Przemyslaw Marczak
• [U-Boot] [PATCH 2/3] Odroid-XU3: enable the last dram bank and reserve 22MiB   Przemyslaw Marczak
• [U-Boot] [PATCH 3/3] Odroid U3: use common code for dram reservation   Przemyslaw Marczak
• [U-Boot] [PATCH] fs: ext4 write: return file len on success   Przemyslaw Marczak
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Przemyslaw Marczak
• [U-Boot] [PATCH 3/4] mmc: exynos dwmmc: check boot mode before init dwmmc   Przemyslaw Marczak
• [U-Boot] [PATCH V2 0/4] exynos-dwmmc: check set init priority for boot channel   Przemyslaw Marczak
• [U-Boot] [PATCH V2 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Przemyslaw Marczak
• [U-Boot] [PATCH V2 2/4] s5p: gpio: add implementation of dm_gpio_set_pull()   Przemyslaw Marczak
• [U-Boot] [PATCH V2 3/4] mmc: exynos dwmmc: check boot mode before init dwmmc   Przemyslaw Marczak
• [U-Boot] [PATCH V2 4/4] mmc: print SD/eMMC type for inited mmc devices   Przemyslaw Marczak
• [U-Boot] [PATCH v2 1/8] exynos: config: enable arch memcpy and arch memset   Przemyslaw Marczak
• [U-Boot] [PATCH v2 2/8] arm: relocation: clear .bss section with arch memset if defined   Przemyslaw Marczak
• [U-Boot] [PATCH v2 6/8] kconfig: malloc: add option for skip memset at malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH v2 8/8] odroid: defconfig: enable expert and skip malloc memset   Przemyslaw Marczak
• [U-Boot] [PATCH v2 0/8] arm: a few steps to reduce the boot time   Przemyslaw Marczak
• [U-Boot] [PATCH] gpt: support random UUIDs without setting environment variables   Przemyslaw Marczak
• [U-Boot] [PATCH] gpt: fix error reporting on partition table write failures   Przemyslaw Marczak
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Przemyslaw Marczak
• [U-Boot] [PATCH 3/4] mmc: exynos dwmmc: check boot mode before init dwmmc   Przemyslaw Marczak
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Przemyslaw Marczak
• [U-Boot] [PATCH 3/4] mmc: exynos dwmmc: check boot mode before init dwmmc   Przemyslaw Marczak
• [U-Boot] [PATCH v2 6/8] kconfig: malloc: add option for skip memset at malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH] fs: ext4 write: return file len on success   Przemyslaw Marczak
• [U-Boot] [PATCH v3 0/6] arm: a few steps to improve boot time   Przemyslaw Marczak
• [U-Boot] [PATCH v3 1/6] exynos: config: enable arch memcpy and arch memset   Przemyslaw Marczak
• [U-Boot] [PATCH v3 2/6] arm: relocation: clear .bss section with arch memset if defined   Przemyslaw Marczak
• [U-Boot] [PATCH v3 3/6] dfu: mmc: file buffer: remove static allocation   Przemyslaw Marczak
• [U-Boot] [PATCH v3 4/6] dlmalloc: add option for skip memset in malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH v3 5/6] trats2: defconfig: enable expert and skip memset at malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH v3 6/6] odroid: defconfig: enable expert and skip memset at malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH V3 0/2] exynos-dwmmc: set init priority for boot channel   Przemyslaw Marczak
• [U-Boot] [PATCH V3 1/2] mmc: exynos dwmmc: check boot mode before init dwmmc   Przemyslaw Marczak
• [U-Boot] [PATCH V3 2/2] mmc: print SD/eMMC type for inited mmc devices   Przemyslaw Marczak
• [U-Boot] [PATCH v3 4/6] dlmalloc: add option for skip memset in malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Przemyslaw Marczak
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Przemyslaw Marczak
• [U-Boot] [PATCH] gpt: support random UUIDs without setting environment variables   Przemyslaw Marczak
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Przemyslaw Marczak
• [U-Boot] [PATCH v4 0/6] arm: a few steps to improve boot time   Przemyslaw Marczak
• [U-Boot] [PATCH v4 1/6] exynos: config: enable arch memcpy and arch memset   Przemyslaw Marczak
• [U-Boot] [PATCH v4 2/6] arm: relocation: clear .bss section with arch memset if defined   Przemyslaw Marczak
• [U-Boot] [PATCH v4 3/6] dfu: mmc: file buffer: remove static allocation   Przemyslaw Marczak
• [U-Boot] [PATCH v4 4/6] dlmalloc: do memset in malloc init as new default config   Przemyslaw Marczak
• [U-Boot] [PATCH v4 5/6] trats2: defconfig: disable memset at malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH v4 6/6] odroid: defconfig: disable memset at malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Przemyslaw Marczak
• [U-Boot] [PATCH v5 0/7] arm: a few steps to improve boot time   Przemyslaw Marczak
• [U-Boot] [PATCH v5 1/7] exynos: config: enable arch memcpy and arch memset   Przemyslaw Marczak
• [U-Boot] [PATCH v5 2/7] arm: relocation: clear .bss section with arch memset if defined   Przemyslaw Marczak
• [U-Boot] [PATCH v5 3/7] dfu: mmc: file buffer: remove static allocation   Przemyslaw Marczak
• [U-Boot] [PATCH v5 4/7] dlmalloc: do memset in malloc init as new default config   Przemyslaw Marczak
• [U-Boot] [PATCH v5 5/7] trats2: defconfig: disable memset at malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH v5 6/7] odroid: defconfig: disable memset at malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH v5 7/7] odroid-xu3: defconfig: disable memset at malloc init   Przemyslaw Marczak
• [U-Boot] [PATCH v4 4/6] dlmalloc: do memset in malloc init as new default config   Przemyslaw Marczak
• [U-Boot] [PATCH v5 0/7] arm: a few steps to improve boot time   Przemyslaw Marczak
• [U-Boot] "Writing to MMC(%d)... failed"   Przemyslaw Marczak
• [U-Boot] "Writing to MMC(%d)... failed"   Przemyslaw Marczak
• [U-Boot] dfu_get_buf: Could not memalign 0x2000000 bytes   Przemyslaw Marczak
• [U-Boot] dfu_get_buf: Could not memalign 0x2000000 bytes   Przemyslaw Marczak
• [U-Boot] falcon mode for signed FIT images   Belisko Marek
• [U-Boot] [MinnowBoard] Mainline U-Boot for MinnowBoard MAX   Krause Martin
• [U-Boot] Regarding USB device testing in U-boot release   Ramneek Mehresh
• [U-Boot] bootvx command: flush cache not working properly   Rami Meiran
• [U-Boot] [RFC PATCH v2 2/6] x86: quark: Add routines to access message bus registers   Bin Meng
• [U-Boot] [RFC PATCH v2 4/6] x86: Add basic Intel Quark processor support   Bin Meng
• [U-Boot] [RFC PATCH v2 3/6] x86: quark: Add Cache-As-RAM initialization   Bin Meng
• [U-Boot] [PATCH] PCI: add 64-bit prefetchable memory support   Bin Meng
• [U-Boot] U-Boot gitweb   Bin Meng
• [U-Boot] [PATCH v2] PCI: add 64-bit prefetchable memory support   Bin Meng
• [U-Boot] [PATCH] cmd: Fix gettime command help   Bin Meng
• [U-Boot] [PATCH 1/2] bootstage: Fix typos in the comment   Bin Meng
• [U-Boot] [PATCH 2/2] x86: Use tab instead of space to indent in PCIE_ECAM_BASE   Bin Meng
• [U-Boot] [PATCH 2/2] x86: Use tab instead of space to indent in PCIE_ECAM_BASE   Bin Meng
• [U-Boot] [RFC PATCH v3 0/7] x86: New Intel Quark SoC support   Bin Meng
• [U-Boot] [RFC PATCH v3 1/7] x86: Add header files for Intel Quark SoC defines   Bin Meng
• [U-Boot] [RFC PATCH v3 2/7] x86: quark: Add routines to access message bus registers   Bin Meng
• [U-Boot] [RFC PATCH v3 3/7] x86: Define macros for pci configuration space access   Bin Meng
• [U-Boot] [RFC PATCH v3 4/7] x86: quark: Add Cache-As-RAM initialization   Bin Meng
• [U-Boot] [RFC PATCH v3 5/7] x86: Add basic Intel Quark processor support   Bin Meng
• [U-Boot] [RFC PATCH v3 6/7] x86: Add basic Intel Galileo board support   Bin Meng
• [U-Boot] [RFC PATCH v3 7/7] x86: Enable the Intel quark/galileo build   Bin Meng
• [U-Boot] U-Boot gitweb   Bin Meng
• [U-Boot] [RFC PATCH 0/9] x86: Add Intel Quark Memory Reference Code (MRC) support   Bin Meng
• [U-Boot] [RFC PATCH 1/9] x86: Allow overriding TSC_FREQ_IN_MHZ   Bin Meng
• [U-Boot] [RFC PATCH 2/9] x86: quark: Bypass TSC calibration   Bin Meng
• [U-Boot] [RFC PATCH 3/9] x86: quark: Add Memory Reference Code (MRC) main routines   Bin Meng
• [U-Boot] [RFC PATCH 4/9] x86: quark: Add utility codes needed for MRC   Bin Meng
• [U-Boot] [RFC PATCH 5/9] x86: quark: Add System Memory Controller support   Bin Meng
• [U-Boot] [RFC PATCH 6/9] x86: quark: Enable the Memory Reference Code build   Bin Meng
• [U-Boot] [RFC PATCH 7/9] fdtdec: Add compatible id and string for Intel Quark MRC   Bin Meng
• [U-Boot] [RFC PATCH 8/9] dt-bindings: Add Intel Quark MRC bindings   Bin Meng
• [U-Boot] [RFC PATCH 9/9] x86: quark: Call MRC in dram_init()   Bin Meng
• [U-Boot] [PATCH 0/6] x86: Add some peripherals support to Intel Galileo   Bin Meng
• [U-Boot] [PATCH 1/6] x86: quark: Initialize non-standard BARs   Bin Meng
• [U-Boot] [PATCH 2/6] x86: galileo: Add GPIO support   Bin Meng
• [U-Boot] [PATCH 3/6] x86: pci: Add pci ids for Quark SoC   Bin Meng
• [U-Boot] [PATCH 4/6] x86: Add SPI support to quark/galileo   Bin Meng
• [U-Boot] [PATCH 5/6] x86: Add SD/MMC support to quark/galileo   Bin Meng
• [U-Boot] [PATCH 6/6] x86: Add Intel Galileo instructions in README.x86   Bin Meng
• [U-Boot] [RFC PATCH 6/9] x86: quark: Enable the Memory Reference Code build   Bin Meng
• [U-Boot] [RFC PATCH 9/9] x86: quark: Call MRC in dram_init()   Bin Meng
• [U-Boot] [RFC PATCH 6/9] x86: quark: Enable the Memory Reference Code build   Bin Meng
• [U-Boot] [RFC PATCH 3/9] x86: quark: Add Memory Reference Code (MRC) main routines   Bin Meng
• [U-Boot] [RFC PATCH 4/9] x86: quark: Add utility codes needed for MRC   Bin Meng
• [U-Boot] [RFC PATCH 5/9] x86: quark: Add System Memory Controller support   Bin Meng
• [U-Boot] [RFC PATCH v2 0/9] x86: Add Intel Quark Memory Reference Code (MRC) support   Bin Meng
• [U-Boot] [RFC PATCH v2 1/9] x86: Allow overriding TSC_FREQ_IN_MHZ   Bin Meng
• [U-Boot] [RFC PATCH v2 2/9] x86: quark: Bypass TSC calibration   Bin Meng
• [U-Boot] [RFC PATCH v2 3/9] x86: quark: Add Memory Reference Code (MRC) main routines   Bin Meng
• [U-Boot] [RFC PATCH v2 4/9] x86: quark: Add utility codes needed for MRC   Bin Meng
• [U-Boot] [RFC PATCH v2 5/9] x86: quark: Add System Memory Controller support   Bin Meng
• [U-Boot] [RFC PATCH v2 6/9] x86: quark: Enable the Memory Reference Code build   Bin Meng
• [U-Boot] [RFC PATCH v2 7/9] fdtdec: Add compatible id and string for Intel Quark MRC   Bin Meng
• [U-Boot] [RFC PATCH v2 8/9] dt-bindings: Add Intel Quark MRC bindings   Bin Meng
• [U-Boot] [RFC PATCH v2 9/9] x86: quark: Call MRC in dram_init()   Bin Meng
• [U-Boot] [RFC PATCH 6/9] x86: quark: Enable the Memory Reference Code build   Bin Meng
• [U-Boot] x86: ACPI support suggestion   Bin Meng
• [U-Boot] [PATCH 1/6] x86: Support machines with >4GB of RAM   Bin Meng
• [U-Boot] [PATCH 3/6] x86: spi: Add support for lynxpoint   Bin Meng
• [U-Boot] [PATCH 4/6] x86: Move common Chromebook config into a separate file   Bin Meng
• [U-Boot] [PATCH 3/6] x86: spi: Add support for lynxpoint   Bin Meng
• [U-Boot] [PATCH 5/6] x86: pci: Add PCI IDs for lynxpoint   Bin Meng
• [U-Boot] [PATCH 6/6] x86: Add support for panther (Asus Chromebox)   Bin Meng
• [U-Boot] [PATCH] x86: minnowmax: add GPIO mapping support   Bin Meng
• [U-Boot] [PATCH 02/22] sandbox: Correct device tree 'reg' properties for I2C and SPI   Bin Meng
• [U-Boot] [PATCH 04/22] x86: Add a x86_ prefix to the x86-specific PCI functions   Bin Meng
• [U-Boot] [PATCH 05/22] RFC: x86: Split up arch_cpu_init()   Bin Meng
• [U-Boot] [PATCH 07/22] fdt: Tighten up error handling in fdtdec_get_pci_addr()   Bin Meng
• [U-Boot] [PATCH 1/6] x86: Support machines with >4GB of RAM   Bin Meng
• [U-Boot] [PATCH 05/22] RFC: x86: Split up arch_cpu_init()   Bin Meng
• [U-Boot] [PATCH 08/22] dm: core: Add dev_get_uclass_priv() to access uclass private data   Bin Meng
• [U-Boot] [PATCH] x86: minnowmax: add GPIO mapping support   Bin Meng
• [U-Boot] [PATCH] x86: minnowmax: add GPIO mapping support   Bin Meng
• [U-Boot] [PATCH] keystone2: ddr3: eliminate using global ddr3_size variable   Nishanth Menon
• [U-Boot] [PATCH] net: keystone_net: move serdes setup to initialization function   Nishanth Menon
• [U-Boot] [U-boot][PATCH] keystone2: add support for UART download   Nishanth Menon
• [U-Boot] [U-boot][PATCH] keystone2: add support for UART download   Nishanth Menon
• [U-Boot] [PATCH] am43xx_evm: Add netboot and related to environment   Nishanth Menon
• [U-Boot] [U-boot][PATCH v2] keystone2: add support for UART download   Nishanth Menon
• [U-Boot] [U-boot][PATCH v2] keystone2: add support for UART download   Nishanth Menon
• [U-Boot] [U-boot][PATCH] keystone2: add support for UART download   Nishanth Menon
• [U-Boot] [PATCH 0/4] ARM / OMAP5 / DRA7 : Enable proper l2actl configuration   Nishanth Menon
• [U-Boot] [PATCH 1/4] ARM: OMAP: Change set_pl310_ctrl_reg to be generic   Nishanth Menon
• [U-Boot] [PATCH 2/4] ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration   Nishanth Menon
• [U-Boot] [PATCH 3/4] ARM / OMAP5: Add workaround for ARM errata 798870   Nishanth Menon
• [U-Boot] [PATCH 4/4] configs: ti_omap5_common: Enable workaround for ARM errata 798870   Nishanth Menon
• [U-Boot] [PATCH] omap3: Variant and revision checks for ARM Cortex-A8 errata workarounds   Nishanth Menon
• [U-Boot] [PATCH] omap3: Variant and revision checks for ARM Cortex-A8 errata workarounds   Nishanth Menon
• [U-Boot] [PATCH V2 0/9] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements   Nishanth Menon
• [U-Boot] [PATCH V2 1/9] ARM: OMAP: Change set_pl310_ctrl_reg to be generic   Nishanth Menon
• [U-Boot] [PATCH V2 2/9] ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs   Nishanth Menon
• [U-Boot] [PATCH V2 4/9] ARM: Provide a mechanism to invoke SoC specific errata WA for CP15   Nishanth Menon
• [U-Boot] [PATCH V2 5/9] ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870   Nishanth Menon
• [U-Boot] [PATCH V2 6/9] configs: ti_omap5_common: Enable workaround for ARM errata 798870   Nishanth Menon
• [U-Boot] [PATCH V2 8/9] configs: ti_omap3_common: Enable workaround for ARM errata 454179, 430973, 621766   Nishanth Menon
• [U-Boot] [PATCH V2 0/9] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements   Nishanth Menon
• [U-Boot] [PATCH V2 1/9] ARM: OMAP: Change set_pl310_ctrl_reg to be generic   Nishanth Menon
• [U-Boot] [PATCH V2 2/9] ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs   Nishanth Menon
• [U-Boot] [PATCH V2 3/9] ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1   Nishanth Menon
• [U-Boot] [PATCH V2 4/9] ARM: Provide a mechanism to invoke SoC specific errata WA for CP15   Nishanth Menon
• [U-Boot] [PATCH V2 5/9] ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870   Nishanth Menon
• [U-Boot] [PATCH V2 6/9] configs: ti_omap5_common: Enable workaround for ARM errata 798870   Nishanth Menon
• [U-Boot] [PATCH V2 7/9] ARM: OMAP3: Introduce OMAP3 Cortex-A8 revision specific errata   Nishanth Menon
• [U-Boot] [PATCH V2 8/9] configs: ti_omap3_common: Enable workaround for ARM errata 454179, 430973, 621766   Nishanth Menon
• [U-Boot] [PATCH V2 9/9] ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration   Nishanth Menon
• [U-Boot] [PATCH] omap3: Variant and revision checks for ARM Cortex-A8 errata workarounds   Nishanth Menon
• [U-Boot] [PATCH v4 03/10] Exynos542x: Add workaround for ARM errata 798870   Nishanth Menon
• [U-Boot] [PATCH v4 03/10] Exynos542x: Add workaround for ARM errata 798870   Nishanth Menon
• [U-Boot] [PATCH v4 03/10] Exynos542x: Add workaround for ARM errata 798870   Nishanth Menon
• [U-Boot] [PATCH V2 2/9] ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs   Nishanth Menon
• [U-Boot] [PATCH V2 7/9] ARM: OMAP3: Introduce OMAP3 Cortex-A8 revision specific errata   Nishanth Menon
• [U-Boot] [PATCH V3 0/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements   Nishanth Menon
• [U-Boot] [PATCH V3 01/11] ARM: Introduce erratum workaround for 798870   Nishanth Menon
• [U-Boot] [PATCH V3 02/11] ARM: Introduce erratum workaround for 454179   Nishanth Menon
• [U-Boot] [PATCH V3 03/11] ARM: Introduce erratum workaround for 430973   Nishanth Menon
• [U-Boot] [PATCH V3 04/11] ARM: Introduce erratum workaround for 621766   Nishanth Menon
• [U-Boot] [PATCH V3 05/11] ARM: OMAP: Change set_pl310_ctrl_reg to be generic   Nishanth Menon
• [U-Boot] [PATCH V3 06/11] ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs   Nishanth Menon
• [U-Boot] [PATCH V3 07/11] ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1   Nishanth Menon
• [U-Boot] [PATCH V3 08/11] ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870   Nishanth Menon
• [U-Boot] [PATCH V3 09/11] ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration   Nishanth Menon
• [U-Boot] [PATCH V3 10/11] ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766   Nishanth Menon
• [U-Boot] [PATCH V3 11/11] ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973, 621766   Nishanth Menon
• [U-Boot] [PATCH v4 03/10] Exynos542x: Add workaround for ARM errata 798870   Nishanth Menon
• [U-Boot] [PATCH V2 8/9] configs: ti_omap3_common: Enable workaround for ARM errata 454179, 430973, 621766   Nishanth Menon
• [U-Boot] [PATCH V3 0/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements   Nishanth Menon
• [U-Boot] [sunxi] [RFC/RFH] Adding mainline u-boot support for the Olimex A20-SOM-EVB   Karsten Merker
• [U-Boot] [PATCH] board: tbs2910: Gate clock when switching async clock muxes   Soeren Moch
• [U-Boot] [PATCH] board: tbs2910: Gate clock when switching async clock muxes   Soeren Moch
• [U-Boot] [PATCH] board: tbs2910: Enable USB Mass Storage support   Soeren Moch
• [U-Boot] U-Boot Digest, Vol 81, Issue 61   Soeren Moch
• [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support   Soeren Moch
• [U-Boot] [PATCH] cmd_usb_mass_storage: Remove extra 'ums' string in the usage text   Soeren Moch
• [U-Boot] [PATCH] RSA depends on DM   Robert Moskowitz
• [U-Boot] U-Boot with PXE   Islam Mukambetov
• [U-Boot] U-Boot gitweb   Nable
• [U-Boot] Git clone using http or rsync broken   Nable
• [U-Boot] "Writing to MMC(%d)... failed"   Nathan
• [U-Boot] "Writing to MMC(%d)... failed"   Nathan
• [U-Boot] "Writing to MMC(%d)... failed"   Nathan
• [U-Boot] [PATCH] imx: don't clobber reset cause   Eric Nelson
• [U-Boot] [PATCH] imx: don't clobber reset cause   Eric Nelson
• [U-Boot] [PATCH] imx: don't clobber reset cause   Eric Nelson
• [U-Boot] [PATCH] imx: don't clobber reset cause   Eric Nelson
• [U-Boot] [PATCH] imx: save reset cause in 'reset_cause' environment variable   Eric Nelson
• [U-Boot] [PATCH] imx: save reset cause in 'reset_cause' environment variable   Eric Nelson
• [U-Boot] [PATCH] imx: don't clobber reset cause   Eric Nelson
• [U-Boot] [PATCH] imx: save reset cause in 'reset_cause' environment variable   Eric Nelson
• [U-Boot] [PATCH] imx: save reset cause in 'reset_cause' environment variable   Eric Nelson
• [U-Boot] [PATCH] imx: save reset cause in 'reset_cause' environment variable   Eric Nelson
• [U-Boot] [PATCH] imx: don't clobber reset cause   Eric Nelson
• [U-Boot] [PATCH] imx: don't clobber reset cause   Eric Nelson
• [U-Boot] [PATCH 1/2] ARM: i.MX: provide access to reset cause through get_imx_reset_cause()   Eric Nelson
• [U-Boot] [PATCH 2/2] nitrogen6x: set environment variable reset_cause   Eric Nelson
• [U-Boot] [PATCH 1/2] gunzip: add gzwrite routine for extracting compresed images to block device   Eric Nelson
• [U-Boot] [PATCH 2/2] unzip: add gzwrite command to write compressed image to block device   Eric Nelson
• [U-Boot] [PATCH 1/2] gunzip: add gzwrite routine for extracting compresed images to block device   Eric Nelson
• [U-Boot] [PATCH V2 1/2] gunzip: add gzwrite routine for extracting compresed images to block device   Eric Nelson
• [U-Boot] [PATCH V2 1/2] gunzip: add gzwrite routine for extracting compresed images to block device   Eric Nelson
• [U-Boot] [PATCH V2 1/2] gunzip: add gzwrite routine for extracting compresed images to block device   Eric Nelson
• [U-Boot] UMS on mx6sl   Eric Nelson
• [U-Boot] UMS on mx6sl   Eric Nelson
• [U-Boot] Enable splash screen for dm 365   NewToThis
• [U-Boot] [PATCHv1 08/22] arm: socfpga: spl: Add call to timer_init   Dinh Nguyen
• [U-Boot] [PATCHv1 13/22] arm: socfpga: spl: Add s_init   Dinh Nguyen
• [U-Boot] [PATCH v2 18/19] dm: socfpga: Move driver model CONFIGs to Kconfig   Dinh Nguyen
• [U-Boot] [PATCH v2 18/19] dm: socfpga: Move driver model CONFIGs to Kconfig   Dinh Nguyen
• [U-Boot] [PATCHv1 13/22] arm: socfpga: spl: Add s_init   Dinh Nguyen
• [U-Boot] DWC2 driver issues   Dinh Nguyen
• [U-Boot] [PATCHv1 01/22] arm: socfpga: spl: Add main sdram code   Dinh Nguyen
• [U-Boot] [PATCHv1 01/22] arm: socfpga: spl: Add main sdram code   Dinh Nguyen
• [U-Boot] [PATCHv1 01/22] arm: socfpga: spl: Add main sdram code   Dinh Nguyen
• [U-Boot] [PATCH] added defconfig for Jesurun Q5   Gábor Nyers
• [U-Boot] [PATCH] added defconfig for Jesurun Q5   Gábor Nyers
• [U-Boot] [PATCH] added defconfig for Jesurun Q5   Gábor Nyers
• [U-Boot] u-boot tftp problem   PF4Public
• [U-Boot] u-boot tftp problem   PF4Public
• [U-Boot] Fwd: Re: u-boot tftp problem   PF4Public
• [U-Boot] u-boot tftp problem   PF4Public
• [U-Boot] u-boot tftp problem   PF4Public
• [U-Boot] [RFC PATCH v1 0/1] Generating kwb image for custom board   Chris Packham
• [U-Boot] [RFC PATCH v1] kwbimage: Align v1 binary header to 4B   Chris Packham
• [U-Boot] Is anyone working on NAND support for Armada-XP?   Chris Packham
• [U-Boot] Is anyone working on NAND support for Armada-XP?   Chris Packham
• [U-Boot] Please pull u-boot-marvell master   Luka Perkov
• [U-Boot] [PATCH 0/3] lsxl: fix and rework boot scripts   Luka Perkov
• [U-Boot] [PATCH] lsxl: add a README file   Luka Perkov
• [U-Boot] Please pull u-boot-marvell master   Luka Perkov
• [U-Boot] [PATCH 2/2] arm:aspenite: Convert to generic board   Luka Perkov
• [U-Boot] [PATCH 1/2] arm:gplugd: Convert to generic board   Luka Perkov
• [U-Boot] [RFC PATCH v1] kwbimage: Align v1 binary header to 4B   Luka Perkov
• [U-Boot] [PATCH 2/2] dreamplug: set CONFIG_BUILD_TARGET to build u-boot.kwb   Luka Perkov
• [U-Boot] [PATCH 1/2] dreamplug: switch to GENERIC_BOARD   Luka Perkov
• [U-Boot] [PATCH 02/21] common/lcd: Add command for setting cursor within lcd-framework   Hannes Petermaier
• [U-Boot] [PATCH 03/21] common/lcd: Add command for writing to lcd-display   Hannes Petermaier
• [U-Boot] [PATCH v2] drivers/video/am335x-fb: Add possibility to wait for stable power/picture   Hannes Petermaier
• [U-Boot] [PATCH v2] common/lcd: Add command for setting cursor within lcd-console   Hannes Petermaier
• [U-Boot] [PATCH v2] common/lcd: Add command for writing to lcd-display   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/common: Take usage of am335x LCD-Display   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/common: try to setup cpsw mac-address from the devicetree   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Enable HW-Watchdog   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Enable U-Boot BOOTCOUNT feature   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Enable EXT4 support   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Change pinmux for GPIO2_28 from GPIO to PWM-Timeroutput   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Chg pinmux - use free NAND Pins in non NAND-config as GPIO   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Chg Pinmux - enable UART1 pins   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/common: Introduce Network Console and common environment for it   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/common: Enable CONFIG_CMD_TIME   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/common: Add support for displaying BMP on LCD   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Rework default-environment settings.   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: cosmetic changes   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/kwb: switch to board HW-Rev3   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/kwb: Support booting Linux   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/kwb: Redesign default-environment   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/kwb: Form a bootline for vxWorks   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/kwb: Support modify bootcmd through reset-controller   Hannes Petermaier
• [U-Boot] [PATCH v2] intern: disable lcd-stdout   Hannes Petermaier
• [U-Boot] [PATCH v2] intern: Add specific offset do FAT-Filesystem   Hannes Petermaier
• [U-Boot] [PATCH v2] intern: Add copy scripts and target specific helpers   Hannes Petermaier
• [U-Boot] [PATCH v2 01/24] drivers/video/am335x-fb: Add possibility to wait for stable power/picture   Hannes Petermaier
• [U-Boot] [PATCH v2 02/24] common/lcd: Add command for setting cursor within lcd-console   Hannes Petermaier
• [U-Boot] [PATCH v2 03/24] common/lcd: Add command for writing to lcd-display   Hannes Petermaier
• [U-Boot] [PATCH v2 04/24] board/BuR/common: Take usage of am335x LCD-Display   Hannes Petermaier
• [U-Boot] [PATCH v2 05/24] board/BuR/common: try to setup cpsw mac-address from the devicetree   Hannes Petermaier
• [U-Boot] [PATCH v2 06/24] board/BuR/tseries: Enable HW-Watchdog   Hannes Petermaier
• [U-Boot] [PATCH v2 07/24] board/BuR/tseries: Enable U-Boot BOOTCOUNT feature   Hannes Petermaier
• [U-Boot] [PATCH v2 08/24] board/BuR/tseries: Enable EXT4 support   Hannes Petermaier
• [U-Boot] [PATCH v2 09/24] board/BuR/tseries: Change pinmux for GPIO2_28 from GPIO to PWM-Timeroutput   Hannes Petermaier
• [U-Boot] [PATCH v2 10/24] board/BuR/tseries: Chg pinmux - use free NAND Pins in non NAND-config as GPIO   Hannes Petermaier
• [U-Boot] [PATCH v2 11/24] board/BuR/tseries: Chg Pinmux - enable UART1 pins   Hannes Petermaier
• [U-Boot] [PATCH v2 12/24] board/BuR/common: Introduce Network Console and common environment for it   Hannes Petermaier
• [U-Boot] [PATCH v2 13/24] board/BuR/common: Enable CONFIG_CMD_TIME   Hannes Petermaier
• [U-Boot] [PATCH v2 14/24] board/BuR/common: Add support for displaying BMP on LCD   Hannes Petermaier
• [U-Boot] [PATCH v2 15/24] board/BuR/tseries: Rework default-environment settings.   Hannes Petermaier
• [U-Boot] [PATCH v2 16/24] board/BuR/tseries: cosmetic changes   Hannes Petermaier
• [U-Boot] [PATCH v2 17/24] board/BuR/kwb: switch to board HW-Rev3   Hannes Petermaier
• [U-Boot] [PATCH v2 18/24] board/BuR/kwb: Support booting Linux   Hannes Petermaier
• [U-Boot] [PATCH v2 19/24] board/BuR/kwb: Redesign default-environment   Hannes Petermaier
• [U-Boot] [PATCH v2 20/24] board/BuR/kwb: Form a bootline for vxWorks   Hannes Petermaier
• [U-Boot] [PATCH v2 21/24] board/BuR/kwb: Support modify bootcmd through reset-controller   Hannes Petermaier
• [U-Boot] [PATCH v2 22/24] intern: disable lcd-stdout   Hannes Petermaier
• [U-Boot] [PATCH v2 23/24] intern: Add specific offset do FAT-Filesystem   Hannes Petermaier
• [U-Boot] [PATCH v2 24/24] intern: Add copy scripts and target specific helpers   Hannes Petermaier
• [U-Boot] [PATCH v2 22/24] intern: disable lcd-stdout   Hannes Petermaier
• [U-Boot] [PATCH v2 23/24] intern: Add specific offset do FAT-Filesystem   Hannes Petermaier
• [U-Boot] [PATCH v2 24/24] intern: Add copy scripts and target specific helpers   Hannes Petermaier
• [U-Boot] [PATCH v2] drivers/video/am335x-fb: Add possibility to wait for stable power/picture   Hannes Petermaier
• [U-Boot] [PATCH v2] common/lcd: Add command for setting cursor within lcd-console   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/common: Take usage of am335x LCD-Display   Hannes Petermaier
• [U-Boot] [PATCH v2] common/lcd: Add command for writing to lcd-display   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Enable HW-Watchdog   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/common: try to setup cpsw mac-address from the devicetree   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Enable U-Boot BOOTCOUNT feature   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Enable EXT4 support   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Change pinmux for GPIO2_28 from GPIO to PWM-Timeroutput   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Chg pinmux - use free NAND Pins in non NAND-config as GPIO   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Chg Pinmux - enable UART1 pins   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/common: Introduce Network Console and common environment for it   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/common: Enable CONFIG_CMD_TIME   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/common: Add support for displaying BMP on LCD   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: Rework default-environment settings.   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/tseries: cosmetic changes   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/kwb: switch to board HW-Rev3   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/kwb: Support booting Linux   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/kwb: Redesign default-environment   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/kwb: Form a bootline for vxWorks   Hannes Petermaier
• [U-Boot] [PATCH v2] board/BuR/kwb: Support modify bootcmd through reset-controller   Hannes Petermaier
• [U-Boot] [PATCH v2] intern: disable lcd-stdout   Hannes Petermaier
• [U-Boot] [PATCH v2] intern: Add specific offset do FAT-Filesystem   Hannes Petermaier
• [U-Boot] [PATCH v2] intern: Add copy scripts and target specific helpers   Hannes Petermaier
• [U-Boot] [PATCH v2] intern: Add copy scripts and target specific helpers   Hannes Petermaier
• [U-Boot] [PATCH v2] intern: Add copy scripts and target specific helpers   Hannes Petermaier
• [U-Boot] [PATCH] lcd: Add support for CONFIG_LCD_NOSTDOUT   Hannes Petermaier
• [U-Boot] Bad colors on BMP display on LCD   Hannes Petermaier
• [U-Boot] Unused video drivers   Andy Pont
• [U-Boot] Automatic download and flash programming with UART boot   Andy Pont
• [U-Boot] [PATCH V3] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Lubomir Popov
• [U-Boot] [PATCH V3] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Lubomir Popov
• [U-Boot] relocation on freescale mx35 doesn't work after update to 2015.01   Priebe, Sebastian
• [U-Boot] relocation on freescale mx35 doesn't work after update to 2015.01   Priebe, Sebastian
• [U-Boot] [PATCH 2/3] arm: relocation: clear .bss section with arch memset if defined   Bill Pringlemeir
• [U-Boot] [PATCH] imx: don't clobber reset cause   Bill Pringlemeir
• [U-Boot] [PATCH] imx: save reset cause in 'reset_cause' environment variable   Bill Pringlemeir
• [U-Boot] [PATCH] imx: save reset cause in 'reset_cause' environment variable   Bill Pringlemeir
• [U-Boot] [PATCH] imx: don't clobber reset cause   Bill Pringlemeir
• [U-Boot] u-boot on raspberry 2: booting in SVC secure mode   Andre Przywara
• [U-Boot] u-boot on raspberry 2: booting in SVC secure mode   Andre Przywara
• [U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase   Steve Rae
• [U-Boot] [PATCH 2/2] fastboot: add support for "oem format" command   Steve Rae
• [U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase   Steve Rae
• [U-Boot] [PATCH v1 2/3] fastboot: Correct fastboot_fail and fastboot_okay strings   Steve Rae
• [U-Boot] [PATCH v1 3/3] usb: gadget: fastboot: Set the Serial Number for Fastboot Gadget   Steve Rae
• [U-Boot] [PATCH v2 1/3] fastboot: OUT transaction length must be aligned to wMaxPacketSize   Steve Rae
• [U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase   Steve Rae
• [U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase   Steve Rae
• [U-Boot] [PATCH] usb: gadget: fastboot: make high-speed work   Steve Rae
• [U-Boot] [PATCH] mpc85xx/t104xrdb : remove raw timing parameter   Vijay Rai
• [U-Boot] [PATCH] powerpc/T104xD4RDB: Add T1040/T1042D4RDB boards support   Vijay Rai
• [U-Boot] [PATCH v3] powerpc/t1040qds: Add support of SD boot for T1040QDS Board   Vijay Rai
• [U-Boot] Odroid XU3 - exynos5422 - SPL - iRAM/sRAM address   Suriyan Ramasami
• [U-Boot] [PATCH][v2] crypto/fsl - Add progressive hashing support using hardware acceleration.   Gaurav Rana
• [U-Boot] [PATCH][v3] crypto/fsl - Add progressive hashing support using hardware acceleration.   Gaurav Rana
• [U-Boot] [PATCH][v4] crypto/fsl - Add progressive hashing support using hardware acceleration.   Gaurav Rana
• [U-Boot] [PATCH] crypto/fsl: Make function names consistent for blob encapsulation/decapsulation.   Gaurav Rana
• [U-Boot] [PATCH][v5] crypto/fsl - Add progressive hashing support using hardware acceleration.   Gaurav Rana
• [U-Boot] [PATCH][v6] crypto/fsl - Add progressive hashing support using hardware acceleration.   Gaurav Rana
• [U-Boot] [PATCH][v2] crypto/fsl: Make function names consistent for blob encapsulation/decapsulation.   Gaurav Rana
• [U-Boot] [PATCH] rsa : Compile Modular Exponentiation files based on CONFIG_RSA_SOFTWARE_EXP   Gaurav Rana
• [U-Boot] [PATCH 1/5] fsl_sfp : Move ccsr_sfp_regs definition to common include   Gaurav Rana
• [U-Boot] [PATCH 2/5] fsl_sec_mon: Add driver for Security Monitor block of Freescale   Gaurav Rana
• [U-Boot] [PATCH 3/5] SECURE BOOT: Add command for validation of images   Gaurav Rana
• [U-Boot] [PATCH 4/5] SECURE_BOOT : enable esbc_validate command for powerpc platform.   Gaurav Rana
• [U-Boot] [PATCH 5/5] SECURE_BOOT : enable esbc_validate command for arm platform.   Gaurav Rana
• [U-Boot] [PATCH][v3] crypto/fsl: Make function names consistent for blob encapsulation/decapsulation.   Gaurav Rana
• [U-Boot] [PATCH 1/4][v2] fsl_sfp : Move ccsr_sfp_regs definition to common include   Gaurav Rana
• [U-Boot] [PATCH 2/4] fsl_sec_mon: Add driver for Security Monitor block of Freescale   Gaurav Rana
• [U-Boot] [PATCH 3/4] SECURE BOOT: Add command for validation of images   Gaurav Rana
• [U-Boot] [PATCH 4/4] SECURE_BOOT : enable esbc_validate command for powerpc and arm platforms.   Gaurav Rana
• [U-Boot] [PATCH][v2] rsa : Compile Modular Exponentiation files based on CONFIG_RSA_SOFTWARE_EXP   Gaurav Rana
• [U-Boot] [PATCH 1/4][v3] fsl_sfp : Move ccsr_sfp_regs definition to common include   Gaurav Rana
• [U-Boot] [PATCH 2/4][v3] fsl_sec_mon: Add driver for Security Monitor block of Freescale   Gaurav Rana
• [U-Boot] [PATCH 3/4][v3] SECURE BOOT: Add command for validation of images   Gaurav Rana
• [U-Boot] [PATCH 4/4][v3] SECURE_BOOT : enable esbc_validate command for powerpc and arm platforms.   Gaurav Rana
• [U-Boot] [PATCH v1 0/4] Jetson-TK1 support for PSCI   Thierry Reding
• [U-Boot] [PATCH v1 0/4] Jetson-TK1 support for PSCI   Thierry Reding
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Thierry Reding
• [U-Boot] [PATCH v2 09/12] tegra124: Add PSCI support for Tegra124   Thierry Reding
• [U-Boot] [PATCH v2 09/12] tegra124: Add PSCI support for Tegra124   Thierry Reding
• [U-Boot] [PATCH v2 09/12] tegra124: Add PSCI support for Tegra124   Thierry Reding
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Thierry Reding
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Thierry Reding
• [U-Boot] [PATCH v2 09/12] tegra124: Add PSCI support for Tegra124   Thierry Reding
• [U-Boot] [PATCH v3 09/12] tegra124: Add PSCI support for Tegra124   Thierry Reding
• [U-Boot] [PATCH v3 09/12] tegra124: Add PSCI support for Tegra124   Thierry Reding
• [U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase   Matt Reimer
• [U-Boot] [PATCH] mmc: sdhci: fix bus width switching on Samsung SoCs   Matt Reimer
• [U-Boot] [PATCH] usb: gadget: fastboot: make high-speed work   Matt Reimer
• [U-Boot] Possible bug in s5p_sdhci.c   Matt Reimer
• [U-Boot] Possible bug in sdhci.c   Matt Reimer
• [U-Boot] [PATCH] mmc: s5p: properly mask SELBASECLK   Matt Reimer
• [U-Boot] [PATCH] mmc: sdhci: don't clobber adjacent registers   Matt Reimer
• [U-Boot] [PATCH 0/4] sunxi: FEL mode fixes   Tom Rini
• [U-Boot] [PATCH v2 0/11] Add full DDR init for Marvell Armada-XP MV78xx0 (AXP)   Tom Rini
• [U-Boot] [PATCH 2/3] arm: relocation: clear .bss section with arch memset if defined   Tom Rini
• [U-Boot] [PATCH 2/3] arm: relocation: clear .bss section with arch memset if defined   Tom Rini
• [U-Boot] [PATCH 1/3] ARmv7: Add a soc_init hook to start.S   Tom Rini
• [U-Boot] [PATCH v2] arm: spl: Allow board_init_r() to run with a larger stack   Tom Rini
• [U-Boot] [U-Boot, 4/4] distro_distro_bootcmd: use CONFIG_BOOTCOMMAND instead of setting bootcmd=   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [U-Boot, 1/4] fs: Add command to retrieve the filesystem type   Tom Rini
• [U-Boot] [U-Boot, 2/4] part: let list put the list in an environment variable   Tom Rini
• [U-Boot] [U-Boot, 3/4] config_distro_bootcmd: Scan all partitions for boot files   Tom Rini
• [U-Boot] [U-Boot, 1/1] common: add cache flush to imxtract function   Tom Rini
• [U-Boot] [U-Boot, 1/2] doc: "os" is also mandatory for "ramdisk" FIT image components   Tom Rini
• [U-Boot] [U-Boot,2/2] doc: fix misspellings   Tom Rini
• [U-Boot] linker_lists: fix misspellings   Tom Rini
• [U-Boot] [U-Boot, 1/3] imagetool: move common code to imagetool module   Tom Rini
• [U-Boot] [U-Boot, 2/3] imagetool: make the image_save_datafile() available to all image types   Tom Rini
• [U-Boot] [U-Boot, 3/3] imagetool: replace image registration function by linker_lists feature   Tom Rini
• [U-Boot] [U-Boot, 1/4] dumpimage: add 'T' option to explicitly set the image type   Tom Rini
• [U-Boot] [U-Boot, 2/4] dumpimage: replace the term "datafile" by "subimage"   Tom Rini
• [U-Boot] [U-Boot,3/4] dumpimage: fit: extract FIT images   Tom Rini
• [U-Boot] [U-Boot, 4/4] tools: do not print error messages in verify_header() functions   Tom Rini
• [U-Boot] common: bootm: Document fake bootm sub-command   Tom Rini
• [U-Boot] cmd: Fix gettime command help   Tom Rini
• [U-Boot] distro_bootcmd: read DHCP boot script name from a variable   Tom Rini
• [U-Boot] arm: switch armltd vexpress to GENERIC_BOARD   Tom Rini
• [U-Boot] drivers/net/e1000.c: fix compile warning under 64bit mode   Tom Rini
• [U-Boot] [U-Boot, 1/2] drivers/pci/pci_rom.c: fix compile warning under 64bit mode   Tom Rini
• [U-Boot] [U-Boot,V5] add README.distro file   Tom Rini
• [U-Boot] [U-Boot, 3/4, v2] vexpress64: get rid of CONFIG_SYS_EXTRA_OPTIONS   Tom Rini
• [U-Boot] [U-Boot, 4/4, v2] vexpress64: support the Juno Development Platform   Tom Rini
• [U-Boot] fpga: Extend dump description   Tom Rini
• [U-Boot] ARM: armv7 fix spelling of SCTRL   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Please pull u-boot-x86 branch patman   Tom Rini
• [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] Pull request: u-boot-blackfin   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] [ANN] U-Boot v2015.04-rc1 released   Tom Rini
• [U-Boot] [PATCH v2] arm: spl: Allow board_init_r() to run with a larger stack   Tom Rini
• [U-Boot] [RFC PATCH] arm: Enable CONFIG_USE_ARCH_MEMSET/MEMCPY globally   Tom Rini
• [U-Boot] [RFC PATCH 04/21] ARM: tegra: collect SoC sources into mach-tegra   Tom Rini
• [U-Boot] [ubi] Pull request   Tom Rini
• [U-Boot] [PATCH 3/5] arm: Allow lr to be saved by board code   Tom Rini
• [U-Boot] [RFC] m68k: generic board   Tom Rini
• [U-Boot] [PATCH] kwbimage: Make the Makefile pass in CONFIG_SYS_SPI_U_BOOT_OFFS   Tom Rini
• [U-Boot] Pull request: u-boot-uniphier   Tom Rini
• [U-Boot] Please pull u-boot-marvell master   Tom Rini
• [U-Boot] Please pull u-boot-arc master   Tom Rini
• [U-Boot] [PATCH] kwbimage: Make the Makefile pass in CONFIG_SYS_SPI_U_BOOT_OFFS   Tom Rini
• [U-Boot] [GIT PULL] microblaze changes   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] Pull request: u-boot-video/master   Tom Rini
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master   Tom Rini
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] Samsung patches   Tom Rini
• [U-Boot] [PATCH 1/3] ARmv7: Add a soc_init hook to start.S   Tom Rini
• [U-Boot] [PATCH 1/2] spl_atmel.c: Switch s_init to board_init_f   Tom Rini
• [U-Boot] [PATCH 2/2] mx6: Rework s_init to be spl_board_init() and gate_ungate_all_mx6_pfds()   Tom Rini
• [U-Boot] [PATCH] clock_am43xx:Set the MAC clock to /5 for OPP100   Tom Rini
• [U-Boot] [PATCH] qspi: dra7x: enable quad mode read for ti-qspi driver   Tom Rini
• [U-Boot] Add linux/compiler-gcc5.h to fix builds with gcc5   Tom Rini
• [U-Boot] sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART   Tom Rini
• [U-Boot] [PATCH v2 05/10] ARM: remove devkit3250 board support   Tom Rini
• [U-Boot] [PATCH 2/3] arm: relocation: clear .bss section with arch memset if defined   Tom Rini
• [U-Boot] [RFC PATCH] ARM: Merge v7 and v8 outer cache operations   Tom Rini
• [U-Boot] [PATCH] misc: Call calloc() not malloc() to ensure buffer is zeroed   Tom Rini
• [U-Boot] [PATCH 0/3] arm: reduce .bss section clear time   Tom Rini
• [U-Boot] moderated list?   Tom Rini
• [U-Boot] [PATCH] ARM: HYP/non-sec: relocation before enable secondary cores   Tom Rini
• [U-Boot] [PATCH 0/3] arm: reduce .bss section clear time   Tom Rini
• [U-Boot] u-boot sunxi fel plan for v2015.04   Tom Rini
• [U-Boot] u-boot sunxi fel plan for v2015.04   Tom Rini
• [U-Boot] [PATCH] tools: imagetool: Remove "INSERT BEFORE" from linker script   Tom Rini
• [U-Boot] [PATCH 1/2] gunzip: add gzwrite routine for extracting compresed images to block device   Tom Rini
• [U-Boot] [PATCH] tools: imagetool: Remove "INSERT BEFORE" from linker script   Tom Rini
• [U-Boot] Pull request: u-boot-sh/rmolbile   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] please pull u-boot-samsung master   Tom Rini
• [U-Boot] Please pull u-boot-x86.git branch sandbox   Tom Rini
• [U-Boot] Please pull u-boot-marvell master   Tom Rini
• [U-Boot] [PATCH V2 3/3] rpi: add support for Raspberry Pi 2 model B   Tom Rini
• [U-Boot] [PATCH] tools: imagetool: Remove "INSERT BEFORE" from linker script   Tom Rini
• [U-Boot] [PATCH] am43xx_evm: Add netboot and related to environment   Tom Rini
• [U-Boot] [PATCH V3 3/3] rpi: add support for Raspberry Pi 2 model B   Tom Rini
• [U-Boot] [U-Boot, v2, 8/8] lpc32xx: add support for board work_92105   Tom Rini
• [U-Boot] [PATCH v2 0/8] Extend LPC32xx functionality and add LPC32xx-based work_92015 board   Tom Rini
• [U-Boot] [PULL] u-boot-avr32/master -> u-boot/master   Tom Rini
• [U-Boot] [PULL] u-boot-avr32/master -> u-boot/master   Tom Rini
• [U-Boot] [PATCH v2 0/8] Extend LPC32xx functionality and add LPC32xx-based work_92015 board   Tom Rini
• [U-Boot] [PATCH] add example for file on VFAT filesystem usage   Tom Rini
• [U-Boot] [PATCH V3 3/3] rpi: add support for Raspberry Pi 2 model B   Tom Rini
• [U-Boot] [U-Boot, v2] PCI: add 64-bit prefetchable memory support   Tom Rini
• [U-Boot] .travis.yml: remove 824x builds   Tom Rini
• [U-Boot] [U-Boot,v2] spl, spl_nor: fix compiler warning   Tom Rini
• [U-Boot] [U-Boot, v2] image: Convert to use fdt_for_each_subnode macro   Tom Rini
• [U-Boot] [U-Boot, v2] config_distro_bootcmd.h: Enable CONFIG_CMD_PART   Tom Rini
• [U-Boot] [U-Boot,v1] tools/imagetool: remove linker script   Tom Rini
• [U-Boot] [U-Boot, v3, 1/6] KM/IVM: split the IVM reading and parsing in 2 parts   Tom Rini
• [U-Boot] [U-Boot, v3, 2/6] kirkwood/km_arm: read the IVM eeprom earlier   Tom Rini
• [U-Boot] [U-Boot, v3, 3/6] 85xx/kmp204x: read the IVM eeprom earlier   Tom Rini
• [U-Boot] [U-Boot, v3, 3/6] 85xx/kmp204x: read the IVM eeprom earlier   Tom Rini
• [U-Boot] [U-Boot, v3, 4/6] 83xx/km83xx: read the IVM eeprom earlier   Tom Rini
• [U-Boot] [U-Boot, v3, 5/6] 82xx/km82xx: read the IVM eeprom earlier   Tom Rini
• [U-Boot] [U-Boot,v3,6/6] KM/IVM: remove ivm_read_eeprom(void)   Tom Rini
• [U-Boot] net: keystone_net: move serdes setup to initialization function   Tom Rini
• [U-Boot] keystone2: ddr3: eliminate using global ddr3_size variable   Tom Rini
• [U-Boot] ARM: lpc3250: config: add generic board support   Tom Rini
• [U-Boot] clock_am43xx:Set the MAC clock to /5 for OPP100   Tom Rini
• [U-Boot] mtd, omap: fix case NAND_OMAP_GPMC_PREFETCH not defined   Tom Rini
• [U-Boot] [U-Boot, 1/3] ARM: DRA72x: DDR3: Fix EMIF timings for 666MHz clock   Tom Rini
• [U-Boot] [U-Boot, 1/3] ARM: DRA72x: DDR3: Fix EMIF timings for 666MHz clock   Tom Rini
• [U-Boot] [U-Boot, 2/3] ARM: DRA7: EMIF: Update SDRAM_REF_CTRL register value   Tom Rini
• [U-Boot] [U-Boot, 3/3] ARM: DRA7-evm: DDR3: Update leveling values   Tom Rini
• [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] [ANN] U-Boot v2015.01-rc2 released   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] Question on the max size of SPL and OMAP3 SRAM   Tom Rini
• [U-Boot] [PATCH v2 0/3] Add generic early debug UART feature   Tom Rini
• [U-Boot] [PULL v2] u-boot-avr32/master -> u-boot/master   Tom Rini
• [U-Boot] Please pull u-boot-fdt   Tom Rini
• [U-Boot] [PATCH] arch/x86/cpu/quark/mrc.c: Switch to U_BOOT_DATE / U_BOOT_TIME   Tom Rini
• [U-Boot] [PATCH V3 3/3] rpi: add support for Raspberry Pi 2 model B   Tom Rini
• [U-Boot] [PATCH 3/4] mmc: exynos dwmmc: check boot mode before init dwmmc   Tom Rini
• [U-Boot] [PATCH 3/4] mmc: exynos dwmmc: check boot mode before init dwmmc   Tom Rini
• [U-Boot] [PATCH v1 1/2] fastboot: Add support to flash u-boot and MLO to QSPI   Tom Rini
• [U-Boot] [PATCH 3/4] mmc: exynos dwmmc: check boot mode before init dwmmc   Tom Rini
• [U-Boot] [PATCH 0/4] kconfig: turnaround into single .config   Tom Rini
• [U-Boot] [PATCH 2/2] vexpress64: juno: add default NOR flash boot   Tom Rini
• [U-Boot] [PATCH] sunxi: Set the /chosen/stdout-path fdt property for sunxi boards   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH v3 01/19] ARM: at91: move board select menu and common settings   Tom Rini
• [U-Boot] [PATCH v3 03/19] ARM: at91: collect SoC sources into mach-at91   Tom Rini
• [U-Boot] [PATCH v3 04/19] ARM: tegra: collect SoC sources into mach-tegra   Tom Rini
• [U-Boot] [PATCH v3 05/19] ARM: davinci: move SoC sources to mach-davinci   Tom Rini
• [U-Boot] [PATCH v3 06/19] ARM: kirkwood: move SOC sources to mach-kirkwood   Tom Rini
• [U-Boot] [PATCH v3 07/19] ARM: nomadik: move SoC sources to mach-nomadik   Tom Rini
• [U-Boot] [PATCH v3 08/19] ARM: highbank: move SoC sources to mach-highbank   Tom Rini
• [U-Boot] [PATCH v3 09/19] ARM: orion5x: move SoC sources to mach-orion5x   Tom Rini
• [U-Boot] [PATCH v3 10/19] ARM: versatile: move SoC sources to mach-versatile   Tom Rini
• [U-Boot] [PATCH v3 11/19] ARM: keystone: move SoC sources to mach-keystone   Tom Rini
• [U-Boot] [PATCH v3 12/19] kbuild: prepare for moving headers into mach-*/include/mach   Tom Rini
• [U-Boot] [PATCH v3 13/19] ARM: at91: move SoC headers to mach-at91/include/mach   Tom Rini
• [U-Boot] [PATCH v3 14/19] ARM: davinci: move SoC headers to mach-davinci/include/mach   Tom Rini
• [U-Boot] [PATCH v3 15/19] ARM: kirkwood: move SoC headers to mach-kirkwood/include/mach   Tom Rini
• [U-Boot] [PATCH v3 16/19] ARM: nomadik: move SoC headers to mach-nomadik/include/mach   Tom Rini
• [U-Boot] [PATCH v3 17/19] ARM: orion5x: move SoC headers to mach-orion5x/include/mach   Tom Rini
• [U-Boot] [PATCH v3 18/19] ARM: keystone: move SoC headers to mach-keystone/include/mach   Tom Rini
• [U-Boot] [PATCH v3 19/19] ARM: prepare for including <mach/*.h>   Tom Rini
• [U-Boot] [PATCH V3 1/3] bcm2835/rpi: add SPDX license tags for some files   Tom Rini
• [U-Boot] [PATCH V3 3/3] rpi: add support for Raspberry Pi 2 model B   Tom Rini
• [U-Boot] [PATCH V3 2/3] bcm2836 SoC support (used in Raspberry Pi 2 model B)   Tom Rini
• [U-Boot] [PATCH v3 02/19] ARM: prepare for moving SoC sources into mach-*   Tom Rini
• [U-Boot] [PATCH v1 1/2] fastboot: Add support to flash u-boot and MLO to QSPI   Tom Rini
• [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] [PATCH] omap3: Variant and revision checks for ARM Cortex-A8 errata workarounds   Tom Rini
• [U-Boot] [PATCH 2/2] vexpress64: juno: add default NOR flash boot   Tom Rini
• [U-Boot] [PATCH V2 1/2] gunzip: add gzwrite routine for extracting compresed images to block device   Tom Rini
• [U-Boot] Pull request: u-boot-mmc 23022015   Tom Rini
• [U-Boot] [RFC] m68k: generic board   Tom Rini
• [U-Boot] [PATCH] OMAP3: igep0032: Fix regression due commit f3b4bc45.   Tom Rini
• [U-Boot] [PATCH v5 2/4] kconfig: Adjust ordering so that defaults work as expected   Tom Rini
• [U-Boot] [PATCH v5 3/4] kconfig: switch to single .config configuration   Tom Rini
• [U-Boot] [PATCH v5 4/4] kconfig: remove unneeded dependency on !SPL_BUILD   Tom Rini
• [U-Boot] [PATCH v5 1/4] ARM: UniPhier: set CONFIG_SYS_MALLOC_F to the global default value   Tom Rini
• [U-Boot] [PATCH v5 1/6] ARM: remove jadecpu board support   Tom Rini
• [U-Boot] [PATCH v5 2/6] ARM: remove dkb board support   Tom Rini
• [U-Boot] [PATCH v5 3/6] ARM: remove cm4008 and cm41xx board support   Tom Rini
• [U-Boot] [PATCH v5 4/6] ARM: remove a320evb board support   Tom Rini
• [U-Boot] [PATCH v5 5/6] ARM: remove tnetv107x board support   Tom Rini
• [U-Boot] [PATCH v5 6/6] ARM: davinci: remove hawkboard support   Tom Rini
• [U-Boot] [PATCH 1/3] mx31ads: Convert to generic board   Tom Rini
• [U-Boot] [PATCH 2/3] imx31_phycore: Convert to generic board   Tom Rini
• [U-Boot] [PATCH 3/3] zmx25: Convert to generic board   Tom Rini
• [U-Boot] [PATCH 2/2] usb: invoke board specific USB cleanup interface   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] [PATCH] arm64: Add Xilinx ZynqMP support   Tom Rini
• [U-Boot] [PATCH V2 06/10] arm: socfpga: Zap checkboard()   Stefan Roese
• [U-Boot] [PATCH V2 08/10] arm: socfpga: Add Altera Arria V DK support   Stefan Roese
• [U-Boot] [PATCH v2 0/11] Add full DDR init for Marvell Armada-XP MV78xx0 (AXP)   Stefan Roese
• [U-Boot] [PATCH] arm: spear: Move to generic board support   Stefan Roese
• [U-Boot] [PATCH v2 18/19] dm: socfpga: Move driver model CONFIGs to Kconfig   Stefan Roese
• [U-Boot] [PATCH V2 08/10] arm: socfpga: Add Altera Arria V DK support   Stefan Roese
• [U-Boot] [PATCH] ARM: move -march=* and -mtune= options to arch/arm/Makefile   Stefan Roese
• [U-Boot] [PATCH] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD   Stefan Roese
• [U-Boot] [PATCH v2 0/19] powerpc: Introduce device tree control and driver model   Stefan Roese
• [U-Boot] [PATCH 2/2] net: phy: Add ability to program the ksz9031 skew values from the uboot env   Stefan Roese
• [U-Boot] [PATCH 2/2] net: phy: Add ability to program the ksz9031 skew values from the uboot env   Stefan Roese
• [U-Boot] [PATCH] mtd: nand: omap_gpmc: Make ready/busy pins configurable   Stefan Roese
• [U-Boot] [PATCH v2 8/8] lpc32xx: add support for board work_92105   Stefan Roese
• [U-Boot] [PATCH v2 8/8] lpc32xx: add support for board work_92105   Stefan Roese
• [U-Boot] [PATCH 2/2] net: phy: Add ability to program the ksz9031 skew values from the uboot env   Stefan Roese
• [U-Boot] [PATCH] mtd: nand: omap_gpmc: Make ready/busy pins configurable   Stefan Roese
• [U-Boot] [PATCH v2 17/19] powerpc: ppc4xx: Change from OF_SEPARATE to OF_EMBED   Stefan Roese
• [U-Boot] [RFC PATCH v2 15/19] ARM: kirkwood: move SoC headers to mach-kirkwood/include/mach   Stefan Roese
• [U-Boot] [RFC PATCH v1] kwbimage: Align v1 binary header to 4B   Stefan Roese
• [U-Boot] "Writing to MMC(%d)... failed"   Nathan Royce
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Graeme Russ
• [U-Boot] Let's bury CONFIG_NEEDS_MANUAL_RELOC   Graeme Russ
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Graeme Russ
• [U-Boot] Let's bury CONFIG_NEEDS_MANUAL_RELOC   Graeme Russ
• [U-Boot] [PATCH v1 0/4] Jetson-TK1 support for PSCI   Mark Rutland
• [U-Boot] [PATCH] ARMv8: Bug fix of dcache_disable()   Mark Rutland
• [U-Boot] [PATCH v1 0/4] Jetson-TK1 support for PSCI   Mark Rutland
• [U-Boot] [PATCH] ARMv8: Bug fix of dcache_disable()   Mark Rutland
• [U-Boot] [RFC PATCH] ARM: Merge v7 and v8 outer cache operations   Mark Rutland
• [U-Boot] [PATCH v2 12/12] tegra: Set CNTFRQ for secondary CPUs   Mark Rutland
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Mark Rutland
• [U-Boot] [PATCH v2 11/12] tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0   Mark Rutland
• [U-Boot] [PATCH v2 12/12] tegra: Set CNTFRQ for secondary CPUs   Mark Rutland
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Mark Rutland
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Mark Rutland
• [U-Boot] [PATCH v2 12/12] tegra: Set CNTFRQ for secondary CPUs   Mark Rutland
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Mark Rutland
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Mark Rutland
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Mark Rutland
• [U-Boot] [PATCH v2 06/12] virt-dt: Allow reservation of the secure region when it is in a RAM carveout.   Mark Rutland
• [U-Boot] [PATCH 1/4] mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V   Otavio Salvador
• [U-Boot] [PATCH 2/4] mmc: fsl_esdhc: Add support to force VSELECT set   Otavio Salvador
• [U-Boot] [PATCH 3/4] imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use   Otavio Salvador
• [U-Boot] [PATCH 4/4] warp: Add initial WaRP Board support   Otavio Salvador
• [U-Boot] [PATCH 2/4] mmc: fsl_esdhc: Add support to force VSELECT set   Otavio Salvador
• [U-Boot] [PATCH 1/4] mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V   Otavio Salvador
• [U-Boot] [PATCH v2 1/4] mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V   Otavio Salvador
• [U-Boot] [PATCH v2 2/4] mmc: fsl_esdhc: Add support to force VSELECT set   Otavio Salvador
• [U-Boot] [PATCH v2 3/4] imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use   Otavio Salvador
• [U-Boot] [PATCH v2 4/4] warp: Add initial WaRP Board support   Otavio Salvador
• [U-Boot] [PATCH 2/4] mmc: fsl_esdhc: Add support to force VSELECT set   Otavio Salvador
• [U-Boot] How to program u-boot in eMMC/MMC on iMX   Otavio Salvador
• [U-Boot] How to program u-boot in eMMC/MMC on iMX   Otavio Salvador
• [U-Boot] [PATCH] mx6sabre: Enable USB Mass Storage   Otavio Salvador
• [U-Boot] [PATCH 2/2] warp: Select BOUNCE_BUFFER and CMD_EXT options   Otavio Salvador
• [U-Boot] [PATCH] cmd_usb_mass_storage: Remove extra 'ums' string in the usage text   Otavio Salvador
• [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support   Otavio Salvador
• [U-Boot] [PATCH v2 1/2] mx6sabre: Enable User Mass Storage   Otavio Salvador
• [U-Boot] [PATCH v2 2/2] mx6sabre: Select BOUNCE_BUFFER and CMD_EXT options   Otavio Salvador
• [U-Boot] [PATCH v3 2/2] mx6sabre: Select CMD_EXT4 options   Otavio Salvador
• [U-Boot] [PATCH v3 2/2] mx6sabre: Select CMD_EXT4 options   Otavio Salvador
• [U-Boot] [PATCH v2 1/2] warp: Add USB Mass Storage support   Otavio Salvador
• [U-Boot] [PATCH v2 2/2] warp: Select BOUNCE_BUFFER and CMD_EXT options   Otavio Salvador
• [U-Boot] [PATCH v3] sunxi: Add Linksprite_pcDuino3_Nano board / defconfig   Adam Sampson
• [U-Boot] [PATCH] sunxi: Make CONFIG_DRAM_TPR3 apply to sun[57]i   Adam Sampson
• [U-Boot] [PATCH v3 3/6] Exynos542x: Add and enable get_periph_rate support   Akshay Saraswat
• [U-Boot] [PATCH v4 0/6] Exynos5: Fix warnings and enrich clock_get_periph_rate   Akshay Saraswat
• [U-Boot] [PATCH v4 1/6] Exynos5: Fix compiler warnings due to clock_get_periph_rate   Akshay Saraswat
• [U-Boot] [PATCH v4 2/6] Exynos542x: Move exynos5420_get_pll_clk up and rename   Akshay Saraswat
• [U-Boot] [PATCH v4 3/6] Exynos542x: Add and enable get_periph_rate support   Akshay Saraswat
• [U-Boot] [PATCH v4 4/6] Exynos5: Fix exynos5_get_periph_rate calculations   Akshay Saraswat
• [U-Boot] [PATCH v4 5/6] Exynos5: Use clock_get_periph_rate generic API   Akshay Saraswat
• [U-Boot] [PATCH v4 6/6] Exynos: clock: change mask bits as per peripheral   Akshay Saraswat
• [U-Boot] [PATCH v2 00/11] Add support for booting multiple cores   Akshay Saraswat
• [U-Boot] [PATCH v2 01/11] Exynos542x: Config: Add various configs   Akshay Saraswat
• [U-Boot] [PATCH v2 02/11] Exynos542x: CPU: Power down all secondary cores   Akshay Saraswat
• [U-Boot] [PATCH v2 03/11] Exynos542x: Add workaround for ARM errata 798870   Akshay Saraswat
• [U-Boot] [PATCH v2 04/11] Exynos542x: Add workaround for ARM errata 799270   Akshay Saraswat
• [U-Boot] [PATCH v2 05/11] Exynos542x: Add workaround for exynos iROM errata   Akshay Saraswat
• [U-Boot] [PATCH v2 06/11] Exynos542x: Change ambiguous function name set_l2cache   Akshay Saraswat
• [U-Boot] [PATCH v2 07/11] Exynos542x: cache: Disable clean/evict push to external   Akshay Saraswat
• [U-Boot] [PATCH v2 08/11] Exynos542x: add L2 control register configuration   Akshay Saraswat
• [U-Boot] [PATCH v2 09/11] Exynos542x: Fix secondary core booting for thumb   Akshay Saraswat
• [U-Boot] [PATCH v2 10/11] Exynos542x: Make A7s boot with thumb-mode U-Boot on warm reset   Akshay Saraswat
• [U-Boot] [PATCH v2 11/11] Exynos: Fix L2 cache timings on Exynos5420 and Exynos5800   Akshay Saraswat
• [U-Boot] [PATCH v5 0/7] Exynos5: Fix warnings and enrich clock_get_periph_rate   Akshay Saraswat
• [U-Boot] [PATCH v5 1/7] Exynos5: Fix compiler warnings due to clock_get_periph_rate   Akshay Saraswat
• [U-Boot] [PATCH v5 2/7] Exynos542x: Move exynos5420_get_pll_clk up and rename   Akshay Saraswat
• [U-Boot] [PATCH v5 3/7] Exynos542x: Add and enable get_periph_rate support   Akshay Saraswat
• [U-Boot] [PATCH v5 4/7] Exynos5: Fix exynos5_get_periph_rate calculations   Akshay Saraswat
• [U-Boot] [PATCH v5 5/7] Exynos5: Use clock_get_periph_rate generic API   Akshay Saraswat
• [U-Boot] [PATCH v5 6/7] Exynos: clock: change mask bits as per peripheral   Akshay Saraswat
• [U-Boot] [PATCH v5 7/7] Exynos: Clock: Cleanup soc_get_periph_rate   Akshay Saraswat
• [U-Boot] [PATCH v5 7/7] Exynos: Clock: Cleanup soc_get_periph_rate   Akshay Saraswat
• [U-Boot] [PATCH v6 0/7] Exynos5: Fix warnings and enrich clock_get_periph_rate   Akshay Saraswat
• [U-Boot] [PATCH v6 1/7] Exynos5: Fix compiler warnings due to clock_get_periph_rate   Akshay Saraswat
• [U-Boot] [PATCH v6 2/7] Exynos542x: Move exynos5420_get_pll_clk up and rename   Akshay Saraswat
• [U-Boot] [PATCH v6 3/7] Exynos542x: Add and enable get_periph_rate support   Akshay Saraswat
• [U-Boot] [PATCH v6 4/7] Exynos5: Fix exynos5_get_periph_rate calculations   Akshay Saraswat
• [U-Boot] [PATCH v6 5/7] Exynos5: Use clock_get_periph_rate generic API   Akshay Saraswat
• [U-Boot] [PATCH v6 6/7] Exynos: clock: change mask bits as per peripheral   Akshay Saraswat
• [U-Boot] [PATCH v6 7/7] Exynos: Clock: Cleanup soc_get_periph_rate   Akshay Saraswat
• [U-Boot] [PATCH v3 00/11] Add support for booting multiple cores   Akshay Saraswat
• [U-Boot] [PATCH v3 01/11] Exynos542x: Config: Add various configs   Akshay Saraswat
• [U-Boot] [PATCH v3 02/11] Exynos542x: CPU: Power down all secondary cores   Akshay Saraswat
• [U-Boot] [PATCH v3 03/11] Exynos542x: Add workaround for ARM errata 798870   Akshay Saraswat
• [U-Boot] [PATCH v3 04/11] Exynos542x: Add workaround for ARM errata 799270   Akshay Saraswat
• [U-Boot] [PATCH v3 05/11] Exynos542x: Add workaround for exynos iROM errata   Akshay Saraswat
• [U-Boot] [PATCH v3 06/11] Exynos542x: Change ambiguous function name set_l2cache   Akshay Saraswat
• [U-Boot] [PATCH v3 07/11] Exynos542x: cache: Disable clean/evict push to external   Akshay Saraswat
• [U-Boot] [PATCH v3 08/11] Exynos542x: add L2 control register configuration   Akshay Saraswat
• [U-Boot] [PATCH v3 09/11] Exynos542x: Fix secondary core booting for thumb   Akshay Saraswat
• [U-Boot] [PATCH v3 10/11] Exynos542x: Make A7s boot with thumb-mode U-Boot on warm reset   Akshay Saraswat
• [U-Boot] [PATCH v3 11/11] Exynos: Fix L2 cache timings on Exynos5420 and Exynos5800   Akshay Saraswat
• [U-Boot] [PATCH v3 02/11] Exynos542x: CPU: Power down all secondary cores   Akshay Saraswat
• [U-Boot] [PATCH v3 03/11] Exynos542x: Add workaround for ARM errata 798870   Akshay Saraswat
• [U-Boot] [PATCH v4 00/11] Add support for booting multiple cores   Akshay Saraswat
• [U-Boot] [PATCH v4 01/10] Exynos542x: Config: Add various configs   Akshay Saraswat
• [U-Boot] [PATCH v4 02/10] Exynos542x: CPU: Power down all secondary cores   Akshay Saraswat
• [U-Boot] [PATCH v4 03/10] Exynos542x: Add workaround for ARM errata 798870   Akshay Saraswat
• [U-Boot] [PATCH v4 04/10] Exynos542x: Add workaround for ARM errata 799270   Akshay Saraswat
• [U-Boot] [PATCH v4 05/10] Exynos542x: Add workaround for exynos iROM errata   Akshay Saraswat
• [U-Boot] [PATCH v4 06/10] Exynos542x: cache: Disable clean/evict push to external   Akshay Saraswat
• [U-Boot] [PATCH v4 07/10] Exynos542x: add L2 control register configuration   Akshay Saraswat
• [U-Boot] [PATCH v4 08/10] Exynos542x: Fix secondary core booting for thumb   Akshay Saraswat
• [U-Boot] [PATCH v4 09/10] Exynos542x: Make A7s boot with thumb-mode U-Boot on warm reset   Akshay Saraswat
• [U-Boot] [PATCH v4 10/10] Exynos: Fix L2 cache timings on Exynos5420 and Exynos5800   Akshay Saraswat
• [U-Boot] [PATCH v4 03/10] Exynos542x: Add workaround for ARM errata 798870   Akshay Saraswat
• [U-Boot] [PATCH v4 03/10] Exynos542x: Add workaround for ARM errata 798870   Akshay Saraswat
• [U-Boot] [PATCH v4 03/10] Exynos542x: Add workaround for ARM errata 798870   Akshay Saraswat
• [U-Boot] Loop Variable through to user space   André Schaller
• [U-Boot] Loop Variable through to user space   André Schaller
• [U-Boot] SPL: undefined reference 'file_fat_write'   André Schaller
• [U-Boot] [PATCH] .travis.yml: remove 824x builds   Heiko Schocher
• [U-Boot] [PATCH] powerpc, mpc5xx: fix compiler warning   Heiko Schocher
• [U-Boot] [PATCH] powerpc, mpc5xx: fix compiler warning   Heiko Schocher
• [U-Boot] [PATCH] powerpc, mpc5xx: fix compiler warning   Heiko Schocher
• [U-Boot] [PATCH v2] intern: Add copy scripts and target specific helpers   Heiko Schocher
• [U-Boot] [PATCH v2] intern: Add copy scripts and target specific helpers   Heiko Schocher
• [U-Boot] [PATCH] cmd_i2c: quit I2C commands immediately on error   Heiko Schocher
• [U-Boot] [PATCH V3] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Heiko Schocher
• [U-Boot] [PATCH V3] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Heiko Schocher
• [U-Boot] [PATCH v2 01/19] dm: i2c: Add a dm_ prefix to driver model bus speed functions   Heiko Schocher
• [U-Boot] [PATCH v2 02/19] dm: i2c: Make API accessible even without CONFIG_DM   Heiko Schocher
• [U-Boot] [PATCH v2] spl, spl_nor: fix compiler warning   Heiko Schocher
• [U-Boot] [PATCH 1/5] nand: Add verification functions   Heiko Schocher
• [U-Boot] [PATCH 2/5] cmd_nand: Verify writes to NAND   Heiko Schocher
• [U-Boot] [PATCH 3/5] dfu: nand: Verify writes   Heiko Schocher
• [U-Boot] [PATCH 4/5] nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE   Heiko Schocher
• [U-Boot] [PATCH v2 3/8] lpc32xx: i2c: add LPC32xx I2C interface support   Heiko Schocher
• [U-Boot] [PATCH v2 3/8] lpc32xx: i2c: add LPC32xx I2C interface support   Heiko Schocher
• [U-Boot] [PATCH 01/22] dm: i2c: Add a missing memory allocaton check   Heiko Schocher
• [U-Boot] [PATCH] spl: fix calling "spl export .." more than once   Heiko Schocher
• [U-Boot] [PATCH] arm, da8xx: convert ipam390 board to generic board support   Heiko Schocher
• [U-Boot] [PATCH] am33xx, spl, siemens: enable debug uart output again   Heiko Schocher
• [U-Boot] MIPS UHI spec   Daniel Schwierzeck
• [U-Boot] MIPS UHI spec   Daniel Schwierzeck
• [U-Boot] [PATCH] OMAP3: igep0032: Fix regression due commit f3b4bc45.   Enric Balletbo i Serra
• [U-Boot] v2015.04-rc1 and -rc2 regression wrt 2015.01 on igep0032 (commit f3b4bc45)   Enric Balletbo Serra
• [U-Boot] U-Boot Atmel SAMA5D3 Xplained   Ravi Sharma
• [U-Boot] U-Boot Atmel SAMA5D3 Xplained   Ravi Sharma
• [U-Boot] [PATCH] ARM: at91: at91sam9rlek: update the default nand flash configs   Bo Shen
• [U-Boot] [PATCH 0/2] ARM: at91: at91sam9rlek: add mmc config for at91sam9rlek   Bo Shen
• [U-Boot] [PATCH] ARM: at91: sama5d4: display the U-Boot version on LCD   Bo Shen
• [U-Boot] [PATCH] ARM: at91: at91sam9rlek: add hush parser to defconfig   Bo Shen
• [U-Boot] [PATCH V2 01/13] lcd: move platform-specific structs to their own headers   Bo Shen
• [U-Boot] [PATCH V2 02/13] lcd: split configuration_get_cmap   Bo Shen
• [U-Boot] [PATCH V2 03/13] lcd: atmel: move atmel-specific fb_put_word to atmel_lcdfb   Bo Shen
• [U-Boot] [PATCH v2 1/2] ARM: atmel: arm9: switch to use common timer functions   Bo Shen
• [U-Boot] [PATCH v2 2/2] ARM: atmel: armv7: switch to use common timer functions   Bo Shen
• [U-Boot] [PATCH V2 00/13] common lcd refactor   Bo Shen
• [U-Boot] [PATCH V2 02/13] lcd: split configuration_get_cmap   Bo Shen
• [U-Boot] [PATCH] ARM: atmel: sama5d4 xplained: enable mmc power   Bo Shen
• [U-Boot] [PATCH v4 6/6] Exynos: clock: change mask bits as per peripheral   Joonyoung Shim
• [U-Boot] [PATCH v5 7/7] Exynos: Clock: Cleanup soc_get_periph_rate   Joonyoung Shim
• [U-Boot] [PATCH v5 0/7] Exynos5: Fix warnings and enrich clock_get_periph_rate   Joonyoung Shim
• [U-Boot] [PATCH v5 7/7] Exynos: Clock: Cleanup soc_get_periph_rate   Joonyoung Shim
• [U-Boot] [PATCH v6 7/7] Exynos: Clock: Cleanup soc_get_periph_rate   Joonyoung Shim
• [U-Boot] [PATCH v6 0/7] Exynos5: Fix warnings and enrich clock_get_periph_rate   Joonyoung Shim
• [U-Boot] [RFC/PATCH] tools: New 'spl-stackusage' script   Siarhei Siamashka
• [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Siarhei Siamashka
• [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Siarhei Siamashka
• [U-Boot] [PATCH 1/4] sunxi: Make FEL mode usable again   Siarhei Siamashka
• [U-Boot] [PATCH 1/4] sunxi: Make FEL mode usable again   Siarhei Siamashka
• [U-Boot] [PATCH 2/9] sunxi: Move SPL s_init() code to board_init_f()   Siarhei Siamashka
• [U-Boot] [PATCH sunxi-tools] WIP: fel: Add a command for loading U-Boot SPL binaries in eGON format   Siarhei Siamashka
• [U-Boot] [PATCH 5/5] RFC: sunxi: WIP FEL support   Siarhei Siamashka
• [U-Boot] [PATCH 0/4] sunxi: SPL size reduction patches   Siarhei Siamashka
• [U-Boot] [PATCH 3/4] malloc_simple: Return NULL on malloc failure rather then calling panic()   Siarhei Siamashka
• [U-Boot] [PATCH sunxi-tools] WIP: fel: Add a command for loading U-Boot SPL binaries in eGON format   Siarhei Siamashka
• [U-Boot] [PATCH sunxi-tools] WIP: fel: Add a command for loading U-Boot SPL binaries in eGON format   Siarhei Siamashka
• [U-Boot] [PATCH sunxi-tools] WIP: fel: Add a command for loading U-Boot SPL binaries in eGON format   Siarhei Siamashka
• [U-Boot] [PATCH v2 1/3] arm: Allow lr to be saved by board code   Siarhei Siamashka
• [U-Boot] [PATCH v2 2/3] arm: spl: Provide for a board-specific loader   Siarhei Siamashka
• [U-Boot] [PATCH v2 3/3] sunxi: Normalise FEL support   Siarhei Siamashka
• [U-Boot] [PATCH] tools: mksunxiboot: Fix problems on big endian systems   Siarhei Siamashka
• [U-Boot] [PATCH sunxi-tools v2 0/2] Support unified u-boot SPL for SD cards and FEL mode   Siarhei Siamashka
• [U-Boot] [PATCH sunxi-tools v2 1/2] fel: Split 'aw_fel_get_version' into 'get' and 'print' variants   Siarhei Siamashka
• [U-Boot] [PATCH sunxi-tools v2 2/2] fel: New command for loading U-Boot SPL binaries in eGON format   Siarhei Siamashka
• [U-Boot] [PATCH 17/17] sunxi: Hookup OTG USB controller support   Siarhei Siamashka
• [U-Boot] [PATCH sunxi-tools] WIP: fel: Add a command for loading U-Boot SPL binaries in eGON format   Siarhei Siamashka
• [U-Boot] [PATCH sunxi-tools v2 0/2] Support unified u-boot SPL for SD cards and FEL mode   Siarhei Siamashka
• [U-Boot] [PATCH v2 3/3] sunxi: Normalise FEL support   Siarhei Siamashka
• [U-Boot] [PATCH sunxi-tools v2 0/2] Support unified u-boot SPL for SD cards and FEL mode   Siarhei Siamashka
• [U-Boot] [PATCH 3/3] sunxi: dram: Allow to configure vdd-dll voltage on sun[457]i   Siarhei Siamashka
• [U-Boot] [RFC/PATCH] tools: New 'spl-stackusage' script   Siarhei Siamashka
• [U-Boot] u-boot sunxi fel plan for v2015.04   Siarhei Siamashka
• [U-Boot] u-boot sunxi fel plan for v2015.04   Siarhei Siamashka
• [U-Boot] [PATCH] sunxi: Support the FEL boot mode in the regular u-boot build   Siarhei Siamashka
• [U-Boot] [PATCH v3 03/11] Exynos542x: Add workaround for ARM errata 798870   Siarhei Siamashka
• [U-Boot] [PATCH v3 04/11] Exynos542x: Add workaround for ARM errata 799270   Siarhei Siamashka
• [U-Boot] [PATCH] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels   Siarhei Siamashka
• [U-Boot] [PATCH] sunxi: Fix sun5i mbus speed when booting old kernels   Siarhei Siamashka
• [U-Boot] [linux-sunxi] [UBOOT] Both Linux-Sunxi and Mainline Uboot have issues   Siarhei Siamashka
• [U-Boot] [PATCH] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels   Siarhei Siamashka
• [U-Boot] [PATCH] sunxi: Fix sun5i mbus speed when booting old kernels   Siarhei Siamashka
• [U-Boot] [PATCH] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels   Siarhei Siamashka
• [U-Boot] [PATCH v2] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels   Siarhei Siamashka
• [U-Boot] [PATCH] sunxi: Machine id hack to prevent loading buggy sunxi-3.4 kernels   Siarhei Siamashka
• [U-Boot] [RFC] sunxi: Support uploading 'boot.scr' to RAM over USB OTG in FEL mode   Siarhei Siamashka
• [U-Boot] [linux-sunxi] [PATCH] sunxi: Make CONFIG_DRAM_TPR3 apply to sun[57]i   Siarhei Siamashka
• [U-Boot] [PATCH V3 0/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements   Siarhei Siamashka
• [U-Boot] [PATCH V3 0/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements   Siarhei Siamashka
• [U-Boot] [PATCH] added defconfig for Jesurun Q5   Siarhei Siamashka
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Michal Simek
• [U-Boot] [PATCH v2 1/5] microblaze: Move architecture to use generic board init   Michal Simek
• [U-Boot] [PATCH v2 2/5] microblaze: Speedup code copy   Michal Simek
• [U-Boot] [PATCH v2 3/5] bdinfo: Show information about fdt blob via bdinfo   Michal Simek
• [U-Boot] [PATCH v2 4/5] microblaze: Do not use CONFIG_SYS_GENERIC_GLOBAL_DATA   Michal Simek
• [U-Boot] [PATCH v2 5/5] microblaze: Add support for CONFIG_SYS_MALLOC_F_LEN   Michal Simek
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Michal Simek
• [U-Boot] [PATCH v2 1/5] microblaze: Move architecture to use generic board init   Michal Simek
• [U-Boot] Zynq Zybo booting with mainline U-Boot   Michal Simek
• [U-Boot] SPL DM   Michal Simek
• [U-Boot] [PATCH 1/2] microblaze: spl: Do not call mem_malloc_init and use early alloc   Michal Simek
• [U-Boot] [PATCH 2/2] microblaze: spl: Add LISTS to linker script   Michal Simek
• [U-Boot] SPL DM   Michal Simek
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Michal Simek
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Michal Simek
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Michal Simek
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Michal Simek
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Michal Simek
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Michal Simek
• [U-Boot] [PATCH] arm64: Add Xilinx ZynqMP support   Michal Simek
• [U-Boot] [PATCH] arm64: Add Xilinx ZynqMP support   Michal Simek
• [U-Boot] [PATCH 0/3] Boot from the bootable paritions   Sjoerd Simons
• [U-Boot] [PATCH 1/3] part: Add support for list filtering on bootable partitions   Sjoerd Simons
• [U-Boot] [PATCH 2/3] config_cmd_default.h: Add 'env exists' command   Sjoerd Simons
• [U-Boot] [PATCH 3/3] config_distro_bootcmd.h: Prefer booting from bootable paritions   Sjoerd Simons
• [U-Boot] [PATCH 0/6] Allow sandbox to use config_distro_bootcmd   Sjoerd Simons
• [U-Boot] [PATCH 1/6] sandbox: only do sandboxfs for hostfs interface   Sjoerd Simons
• [U-Boot] [PATCH 2/6] sandbox: Add support for bootz   Sjoerd Simons
• [U-Boot] [PATCH 3/6] sandbox: Implement host dev [device]   Sjoerd Simons
• [U-Boot] [PATCH 4/6] config_distro_bootcmd.h: Add shared block definition for the host interface   Sjoerd Simons
• [U-Boot] [PATCH 5/6] pxe: Ensure all memory access is to mapped memory   Sjoerd Simons
• [U-Boot] [PATCH 6/6] sandbox: add config_distro_defaults and config_distro_bootcmd   Sjoerd Simons
• [U-Boot] [PATCH v2 0/3] Boot from the bootable paritions   Sjoerd Simons
• [U-Boot] [PATCH v2 1/3] part: Add support for list filtering on bootable partitions   Sjoerd Simons
• [U-Boot] [PATCH v2 2/3] config_cmd_default.h: Add 'env exists' command   Sjoerd Simons
• [U-Boot] [PATCH v2 3/3] config_distro_bootcmd.h: Prefer booting from bootable paritions   Sjoerd Simons
• [U-Boot] [PATCH 0/20] tegra: Expand Nyan-big support   Sjoerd Simons
• [U-Boot] [PATCH 3/6] sandbox: Implement host dev [device]   Sjoerd Simons
• [U-Boot] [PATCH 4/6] config_distro_bootcmd.h: Add shared block definition for the host interface   Sjoerd Simons
• [U-Boot] [PATCH 5/6] pxe: Ensure all memory access is to mapped memory   Sjoerd Simons
• [U-Boot] Can I load uEnv.txt conditionally, based on the boot source?   Brian Smucker
• [U-Boot] Can I load uEnv.txt conditionally, based on the boot source?   Brian Smucker
• [U-Boot] [PATCH] mtd: nand: omap_gpmc: Make ready/busy pins configurable   Michal Sojka
• [U-Boot] [PATCH] mtd: nand: omap_gpmc: Make ready/busy pins configurable   Michal Sojka
• [U-Boot] [PATCH 2/2] usb: invoke board specific USB cleanup interface   Inha Song
• [U-Boot] [PATCH v2 1/3] fastboot: OUT transaction length must be aligned to wMaxPacketSize   Stegmaier, Angela
• [U-Boot] [PATCH 17/17] sunxi: Hookup OTG USB controller support   Michal Suchanek
• [U-Boot] u-boot for Snow problem   Michal Suchanek
• [U-Boot] u-boot for Snow problem   Michal Suchanek
• [U-Boot] u-boot for Snow problem   Michal Suchanek
• [U-Boot] [PATCH v2] arm/ls1021a: Add workaround for DDR erratum A008378   York Sun
• [U-Boot] MPC8541 / MPC8555E: DDR_SDRAM_CLK_CNLT[SS_EN] handling   York Sun
• [U-Boot] [PATCH 1/1] MPC8541/MPC8555: Enable SS_EN in DDR_SDRAM_CLK_CNLT register   York Sun
• [U-Boot] [PATCH] configs: LS1012XA: Modify CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS for LS102XA   York Sun
• [U-Boot] [PATCH][v2] crypto/fsl: Make function names consistent for blob encapsulation/decapsulation.   York Sun
• [U-Boot] [PATCH][v2] crypto/fsl: Make function names consistent for blob encapsulation/decapsulation.   York Sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] [PATCH v1 01/24] fsl-ch3/lowlevel: TZPC and TZASC programming to configure non-secure accesses   York Sun
• [U-Boot] [PATCH] arm: ls102xa: Define default values for some CCSR macros   York Sun
• [U-Boot] [PATCH 1/4] arm/ls102xa: create TLB to map PCIe region   York Sun
• [U-Boot] [PATCH 2/4] arm/ls102xa: use a array to define pexmscportsr   York Sun
• [U-Boot] [PATCH] arm: ls102xa: workaround for cache coherency problem   York Sun
• [U-Boot] [PATCH v2] arm: ls1021x: Add support for initializing CAAM's stream id   York Sun
• [U-Boot] [PATCH v2] mmc: fsl_esdhc: Add support for DDR mode   York Sun
• [U-Boot] [PATCH][v3] crypto/fsl: Make function names consistent for blob encapsulation/decapsulation.   York Sun
• [U-Boot] [PATCH][v6] crypto/fsl - Add progressive hashing support using hardware acceleration.   York Sun
• [U-Boot] [PATCH] powerpc/T104xD4RDB: Add T1040/T1042D4RDB boards support   York Sun
• [U-Boot] spi: ftssp010_spi: Use to_ftssp010_spi() to ensure free correct address   Jagan Teki
• [U-Boot] [PATCH] spi: cf_qspi: Fixup to_cf_qspi_slave macro   Jagan Teki
• [U-Boot] [PATCH] spi: davinci: Remove duplicate code to set bus and cs for slave   Jagan Teki
• [U-Boot] [PATCH] qspi: dra7x: enable quad mode read for ti-qspi driver   Jagan Teki
• [U-Boot] [PATCH v2 5/8] lpc32xx: add LPC32xx SSP support (SPI mode)   Jagan Teki
• [U-Boot] [PATCH 3/6] x86: spi: Add support for lynxpoint   Jagan Teki
• [U-Boot] [PATCH v2 01/11] arm: mvebu: maxbcm: Fix compilation warning and add Spansion SPI NOR support   Jagan Teki
• [U-Boot] [PATCH v2 5/8] lpc32xx: add LPC32xx SSP support (SPI mode)   Jagan Teki
• [U-Boot] Unused video drivers   Benoît Thébaudeau
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   Benoît Thébaudeau
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   Benoît Thébaudeau
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   Benoît Thébaudeau
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   Benoît Thébaudeau
• [U-Boot] U-Boot stuck after relocation attempt on MX51 board   Benoît Thébaudeau
• [U-Boot] BDI3000 U-Boot debugging questions (MX51/MX53)   Benoît Thébaudeau
• [U-Boot] [PATCH 2/9] ARM: Factor out reusable psci_cpu_entry   Chen-Yu Tsai
• [U-Boot] [PATCH] nand: Remove unused CONFIG_MTD_NAND_ECC_JFFS2 option   Peter Tyser
• [U-Boot] [PATCH] cmd_yaffs: Clean up command usage messages   Peter Tyser
• [U-Boot] [PATCH] nand: Remove unused read/write structures   Peter Tyser
• [U-Boot] [PATCH 1/5] nand: Add verification functions   Peter Tyser
• [U-Boot] [PATCH 2/5] cmd_nand: Verify writes to NAND   Peter Tyser
• [U-Boot] [PATCH 3/5] dfu: nand: Verify writes   Peter Tyser
• [U-Boot] [PATCH 4/5] nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE   Peter Tyser
• [U-Boot] [PATCH 5/5] nand: yaffs: Remove the "nand write.yaffs" command   Peter Tyser
• [U-Boot] [PATCH 1/3] dm: Prevent "demo hello" and "demo status" segfaults   Peter Tyser
• [U-Boot] [PATCH 1/3] dm: Prevent "demo hello" and "demo status" segfaults   Peter Tyser
• [U-Boot] [PATCH v2 07/10] ARM: remove cm4008 and cm41xx board support   Greg Ungerer
• [U-Boot] [PATCH v2 07/10] ARM: remove cm4008 and cm41xx board support   Greg Ungerer
• [U-Boot] [PATCH 2/4] usb: add 'bcm_udc_otg' support   Marek Vasut
• [U-Boot] [u-boot 03/40] usb: gadget: udc: add udc-core from linux kernel to u-boot   Marek Vasut
• [U-Boot] [u-boot 00/40] dra7xx: am43xx: add dwc3 gadget driver support and enable dfu   Marek Vasut
• [U-Boot] [PATCHv1 13/22] arm: socfpga: spl: Add s_init   Marek Vasut
• [U-Boot] [PATCH v2 18/19] dm: socfpga: Move driver model CONFIGs to Kconfig   Marek Vasut
• [U-Boot] [PATCHv1 13/22] arm: socfpga: spl: Add s_init   Marek Vasut
• [U-Boot] [PATCH V2 08/10] arm: socfpga: Add Altera Arria V DK support   Marek Vasut
• [U-Boot] [PATCH V2 06/10] arm: socfpga: Zap checkboard()   Marek Vasut
• [U-Boot] [PATCH 1/2] cmd: Add getenv_long to support reading signed integers from the uboot env   Marek Vasut
• [U-Boot] [PATCH 2/2] net: phy: Add ability to program the ksz9031 skew values from the uboot env   Marek Vasut
• [U-Boot] [RFC PATCH 1/7] dm: usb: Add a uclass for USB controllers   Marek Vasut
• [U-Boot] [RFC PATCH 0/7] RFC: dm: Add USB support   Marek Vasut
• [U-Boot] [PATCH v2 0/10] ARM: remove non-generic boards   Marek Vasut
• [U-Boot] [PATCH] ARM: move -march=* and -mtune= options to arch/arm/Makefile   Marek Vasut
• [U-Boot] [PATCH] mtd: nand: mxs: fix PIO_WORD number   Marek Vasut
• [U-Boot] [PATCH V2 08/10] arm: socfpga: Add Altera Arria V DK support   Marek Vasut
• [U-Boot] [PATCH V2 08/10] arm: socfpga: Add Altera Arria V DK support   Marek Vasut
• [U-Boot] [PATCH 2/2] net: phy: Add ability to program the ksz9031 skew values from the uboot env   Marek Vasut
• [U-Boot] [RFC PATCH 0/7] RFC: dm: Add USB support   Marek Vasut
• [U-Boot] [PATCH v2 05/10] ARM: remove devkit3250 board support   Marek Vasut
• [U-Boot] [PATCH 2/2] mx6: Rework s_init to be spl_board_init() and gate_ungate_all_mx6_pfds()   Marek Vasut
• [U-Boot] [PATCH v2] mtd: nand: mxs: fix PIO_WORD number   Marek Vasut
• [U-Boot] [PATCH V2 08/10] arm: socfpga: Add Altera Arria V DK support   Marek Vasut
• [U-Boot] [PATCH 2/2] net: phy: Add ability to program the ksz9031 skew values from the uboot env   Marek Vasut
• [U-Boot] [u-boot 02/40] ARM: AM43xx: Enable clocks for USB OTGSS and USB PHY   Marek Vasut
• [U-Boot] [u-boot 03/40] usb: gadget: udc: add udc-core from linux kernel to u-boot   Marek Vasut
• [U-Boot] [PATCH 2/2] arm:aspenite: Convert to generic board   Marek Vasut
• [U-Boot] [PATCH 1/2] gunzip: add gzwrite routine for extracting compresed images to block device   Marek Vasut
• [U-Boot] [PATCHv1 09/22] arm: socfpga: spl: allow bootrom to enable IOs after warm reset   Marek Vasut
• [U-Boot] [PATCH 2/4] mmc: fsl_esdhc: Add support to force VSELECT set   Marek Vasut
• [U-Boot] [PATCH 1/4] mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V   Marek Vasut
• [U-Boot] [PATCH 4/4] warp: Add initial WaRP Board support   Marek Vasut
• [U-Boot] [PATCH v2 1/4] mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V   Marek Vasut
• [U-Boot] [PATCH 2/4] mmc: fsl_esdhc: Add support to force VSELECT set   Marek Vasut
• [U-Boot] [PATCH 1/2] gunzip: add gzwrite routine for extracting compresed images to block device   Marek Vasut
• [U-Boot] [PATCH 11/14] usb: UniPhier: add UniPhier on-chip xHCI host driver support   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH 1/2] dm: Protect device_unbind() with CONFIG_DM_DEVICE_REMOVE   Marek Vasut
• [U-Boot] [PATCH 2/2] arm: socfpga: Enable DM for Cadence and DW SPI   Marek Vasut
• [U-Boot] [PATCH 1/2] dm: Protect device_unbind() with CONFIG_DM_DEVICE_REMOVE   Marek Vasut
• [U-Boot] [PATCH 2/2] arm: socfpga: Enable DM for Cadence and DW SPI   Marek Vasut
• [U-Boot] DWC2 driver issues   Marek Vasut
• [U-Boot] [PATCH 1/2] dm: Protect device_unbind() with CONFIG_DM_DEVICE_REMOVE   Marek Vasut
• [U-Boot] [PATCH 1/2] dm: Protect device_unbind() with CONFIG_DM_DEVICE_REMOVE   Marek Vasut
• [U-Boot] [PATCH] usb: gadget: fastboot: make high-speed work   Marek Vasut
• [U-Boot] [u-boot 02/40] ARM: AM43xx: Enable clocks for USB OTGSS and USB PHY   Marek Vasut
• [U-Boot] [PATCH 11/14] usb: UniPhier: add UniPhier on-chip xHCI host driver support   Marek Vasut
• [U-Boot] [u-boot 14/40] usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiy   Marek Vasut
• [U-Boot] [PATCH 03/11] usb: dwc3: Add BIT() macro   Marek Vasut
• [U-Boot] How to program u-boot in eMMC/MMC on iMX   Marek Vasut
• [U-Boot] [PATCHv1 01/22] arm: socfpga: spl: Add main sdram code   Marek Vasut
• [U-Boot] [PATCH 1/2] usb: common: provide a _weak board_usb_cleanup() function   Marek Vasut
• [U-Boot] Regarding USB device testing in U-boot release   Marek Vasut
• [U-Boot] [u-boot 14/40] usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiy   Marek Vasut
• [U-Boot] [PATCHv1 01/22] arm: socfpga: spl: Add main sdram code   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
• [U-Boot] [PATCH v2 06/16] ARM: UniPhier: remove EHCI platform devices   Marek Vasut
• [U-Boot] [PATCH v2 07/16] ARM: UniPhier: move uniphier_ehci_reset() function   Marek Vasut
• [U-Boot] Is anyone working on NAND support for Armada-XP?   Marek Vasut
• [U-Boot] Is anyone working on NAND support for Armada-XP?   Marek Vasut
• [U-Boot] UMS on mx6sl   Marek Vasut
• [U-Boot] UMS on mx6sl   Marek Vasut
• [U-Boot] [u-boot 14/40] usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiy   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
• [U-Boot] [PATCH] cmd_usb_mass_storage: Remove extra 'ums' string in the usage text   Marek Vasut
• [U-Boot] UMS on mx6sl   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
• [U-Boot] [PATCH 1/2] usb: common: provide a _weak board_usb_cleanup() function   Marek Vasut
• [U-Boot] [u-boot 14/40] usb: dwc3: linux-compat: Add header for dwc3 linux compatibiltiy   Marek Vasut
• [U-Boot] [PATCH] cmd_usb_mass_storage: Remove extra 'ums' string in the usage text   Marek Vasut
• [U-Boot] [PATCH v2 2/2] cmd_usb_mass_storage: Use 'USB Mass Storage' in the help text   Marek Vasut
• [U-Boot] u-boot on raspberry 2: booting in SVC secure mode   Vincent
• [U-Boot] u-boot on raspberry 2: booting in SVC secure mode   Vincent
• [U-Boot] u-boot on raspberry 2: booting in SVC secure mode   Vincent
• [U-Boot] u-boot on raspberry 2: booting in SVC secure mode   Vincent
• [U-Boot] u-boot on raspberry 2: booting in SVC secure mode   Vincent
• [U-Boot] [PATCH 0/3] ARM: DRA7: DDR3: Update timings and leveling parameters   Lokesh Vutla
• [U-Boot] [PATCH 1/3] ARM: DRA72x: DDR3: Fix EMIF timings for 666MHz clock   Lokesh Vutla
• [U-Boot] [PATCH 2/3] ARM: DRA7: EMIF: Update SDRAM_REF_CTRL register value   Lokesh Vutla
• [U-Boot] [PATCH 3/3] ARM: DRA7-evm: DDR3: Update leveling values   Lokesh Vutla
• [U-Boot] [PATCH 09/11] ARM: armada100: remove aspenite and gplugd board support   Prafulla Wadaskar
• [U-Boot] [PATCH 1/2] arm:gplugd: Convert to generic board   Prafulla Wadaskar
• [U-Boot] [PATCH 2/2] arm:aspenite: Convert to generic board   Prafulla Wadaskar
• [U-Boot] [PATCH 2/2] dreamplug: set CONFIG_BUILD_TARGET to build u-boot.kwb   Prafulla Wadaskar
• [U-Boot] [PATCH 1/2] dreamplug: switch to GENERIC_BOARD   Prafulla Wadaskar
• [U-Boot] [PATCH 0/3] lsxl: fix and rework boot scripts   Michael Walle
• [U-Boot] [PATCH 1/3] lsxl: use default load addresses for legacy boot   Michael Walle
• [U-Boot] [PATCH 2/3] lsxl: place the dtb below the inital ramdisk   Michael Walle
• [U-Boot] [PATCH 3/3] lsxl: switch from bootm to bootz for boot commands   Michael Walle
• [U-Boot] spi and block bits   Michael Walle
• [U-Boot] [PATCH] lsxl: add a README file   Michael Walle
• [U-Boot] [PATCH] lsxl: add a README file   Michael Walle
• [U-Boot] [PATCH v2] armv8/vexpress64: make multientry conditional   Linus Walleij
• [U-Boot] [PATCH v2] armv8/vexpress64: make multientry conditional   Linus Walleij
• [U-Boot] [PATCH v3] armv8/vexpress64: make multientry conditional   Linus Walleij
• [U-Boot] [PATCH] vexpress64: juno: support SMC9118 ethernet   Linus Walleij
• [U-Boot] [PATCH 1/2] vexpress64: juno: add NOR flash detection   Linus Walleij
• [U-Boot] [PATCH 2/2] vexpress64: juno: add default NOR flash boot   Linus Walleij
• [U-Boot] [PATCH 2/2] vexpress64: juno: add default NOR flash boot   Linus Walleij
• [U-Boot] [PATCH 2/2] vexpress64: juno: add default NOR flash boot   Linus Walleij
• [U-Boot] [PATCH] m68k: Add generic board support for MCF547X/8X and MCF5445X   Alison Wang
• [U-Boot] [PATCH 1/2] arm: ls102xa: Add silicon version detection for QDS and TWR boards   Alison Wang
• [U-Boot] [PATCH 2/2] arm: ls102xa: Fix interleaving issue on CCI400 slave interface S2   Alison Wang
• [U-Boot] [RFC PATCH 0/21] ARM: start to move SoC code into arch/arm/mach-*   Stephen Warren
• [U-Boot] Raspberry Pi GPIO interacts with u-boot   Stephen Warren
• [U-Boot] [PATCH] sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART   Stephen Warren
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Stephen Warren
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Stephen Warren
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Stephen Warren
• [U-Boot] [PATCH v2] config_distro_bootcmd.h: Enable CONFIG_CMD_PART   Stephen Warren
• [U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot   Stephen Warren
• [U-Boot] [PATCH 1/3] bcm2835/rpi: add SPDX license tags for some files   Stephen Warren
• [U-Boot] [PATCH 2/3] bcm2836 SoC support (used in Raspberry Pi 2 model B)   Stephen Warren
• [U-Boot] [PATCH 3/3] rpi: add support for Raspberry Pi 2 model B   Stephen Warren
• [U-Boot] [PATCH 2/3] bcm2836 SoC support (used in Raspberry Pi 2 model B)   Stephen Warren
• [U-Boot] [PATCH 3/3] rpi: add support for Raspberry Pi 2 model B   Stephen Warren
• [U-Boot] [PATCH V2 1/3] bcm2835/rpi: add SPDX license tags for some files   Stephen Warren
• [U-Boot] [PATCH V2 2/3] bcm2836 SoC support (used in Raspberry Pi 2 model B)   Stephen Warren
• [U-Boot] [PATCH V2 3/3] rpi: add support for Raspberry Pi 2 model B   Stephen Warren
• [U-Boot] DWC2 driver issues   Stephen Warren
• [U-Boot] [PATCH V2 3/3] rpi: add support for Raspberry Pi 2 model B   Stephen Warren
• [U-Boot] [PATCH V2 3/3] rpi: add support for Raspberry Pi 2 model B   Stephen Warren
• [U-Boot] [PATCH V3 1/3] bcm2835/rpi: add SPDX license tags for some files   Stephen Warren
• [U-Boot] [PATCH V3 2/3] bcm2836 SoC support (used in Raspberry Pi 2 model B)   Stephen Warren
• [U-Boot] [PATCH V3 3/3] rpi: add support for Raspberry Pi 2 model B   Stephen Warren
• [U-Boot] [PATCH V3 3/3] rpi: add support for Raspberry Pi 2 model B   Stephen Warren
• [U-Boot] [PATCH V3 3/3] rpi: add support for Raspberry Pi 2 model B   Stephen Warren
• [U-Boot] [PATCH 1/2] ARM: tegra: add function to clear pinmux CLAMPING bit   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: tegra: import latest Jetson TK1 pinmux   Stephen Warren
• [U-Boot] [PATCH V3 3/3] rpi: add support for Raspberry Pi 2 model B   Stephen Warren
• [U-Boot] [PATCH 1/4] dm: tegra: dts: add aliases for spi on apalis_t30   Stephen Warren
• [U-Boot] [PATCH 4/4] apalis/colibri_t30: add misc cmds increase buf sizes and max args   Stephen Warren
• [U-Boot] [PATCH v2 09/12] tegra124: Add PSCI support for Tegra124   Stephen Warren
• [U-Boot] [PATCH v2 10/12] jetson-tk1: Add PSCI configuration options and reserve secure code   Stephen Warren
• [U-Boot] [PATCH v2 11/12] tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0   Stephen Warren
• [U-Boot] [PATCH v2 0/8] arm: a few steps to reduce the boot time   Stephen Warren
• [U-Boot] [PATCH] fs: ext4 write: return file len on success   Stephen Warren
• [U-Boot] [PATCH v2 0/8] arm: a few steps to reduce the boot time   Stephen Warren
• [U-Boot] [PATCH v2 09/12] tegra124: Add PSCI support for Tegra124   Stephen Warren
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Stephen Warren
• [U-Boot] [PATCH V2 1/2] ARM: tegra: add function to clear pinmux CLAMPING bit   Stephen Warren
• [U-Boot] [PATCH V2 2/2] ARM: tegra: import latest Jetson TK1 pinmux   Stephen Warren
• [U-Boot] [PATCH V3 3/3] rpi: add support for Raspberry Pi 2 model B   Stephen Warren
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Stephen Warren
• [U-Boot] [PATCH v2 3/4] kconfig: switch to single .config configuration   Stephen Warren
• [U-Boot] DWC2 driver issues   Stephen Warren
• [U-Boot] [PATCH 1/4] dm: gpio: extend gpio api by dm_gpio_set_pull()   Stephen Warren
• [U-Boot] [PATCH v3 6/7] kconfig: remove unneeded dependency on !SPL_BUILD   Stephen Warren
• [U-Boot] [PATCH v3 6/7] kconfig: remove unneeded dependency on !SPL_BUILD   Stephen Warren
• [U-Boot] [PATCH 1/3] part: Add support for list filtering on bootable partitions   Stephen Warren
• [U-Boot] [PATCH v3 6/7] kconfig: remove unneeded dependency on !SPL_BUILD   Stephen Warren
• [U-Boot] rpi_2 builds fine with make, fails with buildman   Stephen Warren
• [U-Boot] [PATCH 2/3] ARM: tegra: Fix the USB gadget configuration for T20   Stephen Warren
• [U-Boot] [PATCH 3/3] ARM: tegra: usb gadgets: Allow accessing the NAND via DFU   Stephen Warren
• [U-Boot] [PATCH 1/3] usb: ci_udc: Fix set address to work with older controllers   Stephen Warren
• [U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init   Stephen Warren
• [U-Boot] [PATCH] tegra20: tamonten: Fix the early gpio init   Stephen Warren
• [U-Boot] [PATCH v2] tegra20: tamonten: Fix the early gpio init   Stephen Warren
• [U-Boot] [PATCH 3/3] ARM: tegra: usb gadgets: Allow accessing the NAND via DFU   Stephen Warren
• [U-Boot] [PATCH 1/3] usb: ci_udc: Fix set address to work with older controllers   Stephen Warren
• [U-Boot] [PATCH 0/9] ARM: tegra: pinmux: Tegra210 support   Stephen Warren
• [U-Boot] [PATCH 1/9] ARM: tegra: pinmux: add note re: drive group field defines   Stephen Warren
• [U-Boot] [PATCH 2/9] ARM: tegra: pinmux: simplify some defines   Stephen Warren
• [U-Boot] [PATCH 3/9] ARM: tegra: pinmux: handle feature removal on newer SoCs   Stephen Warren
• [U-Boot] [PATCH 4/9] ARM: tegra: pinmux: move some type definitions   Stephen Warren
• [U-Boot] [PATCH 5/9] ARM: tegra: pinmux: partially handle varying register layouts   Stephen Warren
• [U-Boot] [PATCH 6/9] ARM: tegra: pinmux: support hsm/schmitt on pins   Stephen Warren
• [U-Boot] [PATCH 7/9] ARM: tegra: pinmux: account for different drivegroup base registers   Stephen Warren
• [U-Boot] [PATCH 8/9] ARM: tegra: pinmux: support Tegra210's e_io_hv pin option   Stephen Warren
• [U-Boot] [PATCH 9/9] ARM: tegra: pinmux: add Tegra210 support   Stephen Warren
• [U-Boot] [PATCH 0/9] ARM: tegra: pinmux: Tegra210 support   Stephen Warren
• [U-Boot] [PATCH 1/9] ARM: tegra: pinmux: add note re: drive group field defines   Stephen Warren
• [U-Boot] u-boot on raspberry 2: booting in SVC secure mode   Stephen Warren
• [U-Boot] [PATCH v2 0/3] Boot from the bootable paritions   Stephen Warren
• [U-Boot] [PATCH 04/20] tegra: Provide more accurate microsecond time   Stephen Warren
• [U-Boot] [PATCH 06/20] tegra: spi: Drop the claim_bus() method to correct delays   Stephen Warren
• [U-Boot] [PATCH 07/20] dm: tegra: cros_ec: Enable Chrome OS EC on Nyan-big   Stephen Warren
• [U-Boot] [PATCH 17/20] tegra: nyan-big: Add additional clock and kernel init   Stephen Warren
• [U-Boot] [PATCH 18/20] Add Chrome OS config header   Stephen Warren
• [U-Boot] [PATCH 20/20] tegra: config: nyan-big: Add options required by Chrome OS boot   Stephen Warren
• [U-Boot] [PATCH 0/9] ARM: tegra: pinmux: Tegra210 support   Stephen Warren
• [U-Boot] [PATCH 1/3] usb: ci_udc: Fix set address to work with older controllers   Stephen Warren
• [U-Boot] DWC2 driver issues   Stephen Warren
• [U-Boot] u-boot on raspberry 2: booting in SVC secure mode   Stephen Warren
• [U-Boot] [PATCH] mtd: atmel_nand: according to pmecc version to perform 0xff page correction   Scott Wood
• [U-Boot] [PATCH v3 5/7] kconfig: switch to single .config configuration   Scott Wood
• [U-Boot] [PATCH v3 5/7] kconfig: switch to single .config configuration   Scott Wood
• [U-Boot] [PATCH] powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041   Scott Wood
• [U-Boot] [U-Boot, 1/2, v4] powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041   Scott Wood
• [U-Boot] [PATCH v3 5/7] kconfig: switch to single .config configuration   Scott Wood
• [U-Boot] [U-Boot, 1/2, v4] powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041   Scott Wood
• [U-Boot] U-Boot uptime   Andrew Wozniak
• [U-Boot] [PATCH] mtd: atmel_nand: according to pmecc version to perform 0xff page correction   Josh Wu
• [U-Boot] [PATCH] ARM: at91: at91sam9rlek: update the default nand flash configs   Josh Wu
• [U-Boot] [PATCH 0/2] ARM: at91: at91sam9rlek: add mmc config for at91sam9rlek   Josh Wu
• [U-Boot] [PATCH 1/2] ARM: at91: at91sam9rlek: add mci support   Josh Wu
• [U-Boot] [PATCH 2/2] ARM: at91: at91sam9rlek: add mmc environment configuration   Josh Wu
• [U-Boot] [PATCH v2] ARM: at91: at91sam9rlek: update the default nand flash configs   Josh Wu
• [U-Boot] [PATCH] ARM: at91: at91sam9rlek: add hush parser to defconfig   Josh Wu
• [U-Boot] [PATCH V2 00/13] common lcd refactor   Josh Wu
• [U-Boot] [PATCH] ARM: at91: sama5d4: display the U-Boot version on LCD   Josh Wu
• [U-Boot] [PATCH] ARM: at91: at91sam9rlek: add hush parser to defconfig   Josh Wu
• [U-Boot] [PATCH] mtd: atmel_nand: according to pmecc version to perform 0xff page correction   Josh Wu
• [U-Boot] [PATCH] ARM: UniPhier: remove dummy gpio.h   Masahiro YAMADA
• [U-Boot] [PATCH v2 0/6] ARM: UniPhier: add doc, improve I2C EEPROM access   Masahiro YAMADA
• [U-Boot] [PATCH 0/7] ARM: UniPhier: code refactoring and I2C pin fix   Masahiro YAMADA
• [U-Boot] [PATCH 0/2] ARM: UniPhier: refactor pinmon command   Masahiro YAMADA
• [U-Boot] Pull request: u-boot-uniphier   Masahiro YAMADA
• [U-Boot] [PATCH 1/2] dm: Correct default value for SYS_MALLOC_F   Masahiro YAMADA
• [U-Boot] [PATCH 2/4] malloc_f: fix broken .config caused by CONFIG_SYS_MALLOC_F   Masahiro YAMADA
• [U-Boot] [PATCH 2/4] malloc_f: fix broken .config caused by CONFIG_SYS_MALLOC_F   Masahiro YAMADA
• [U-Boot] [PATCH v3 4/7] malloc_f: add ARCH_MALLOC_F_LEN to specify SoC-default malloc_f_len   Masahiro YAMADA
• [U-Boot] [PATCH 1/2] dm: Correct default value for SYS_MALLOC_F   Masahiro YAMADA
• [U-Boot] [PATCH v2 3/4] kconfig: switch to single .config configuration   Masahiro YAMADA
• [U-Boot] [PATCH v3 6/7] kconfig: remove unneeded dependency on !SPL_BUILD   Masahiro YAMADA
• [U-Boot] [PATCH v2 3/4] kconfig: switch to single .config configuration   Masahiro YAMADA
• [U-Boot] [PATCH v3 6/7] kconfig: remove unneeded dependency on !SPL_BUILD   Masahiro YAMADA
• [U-Boot] [PATCH] ARM: move -march=* and -mtune= options to arch/arm/Makefile   Masahiro YAMADA
• [U-Boot] [PATCH v5 0/26] ARM: UniPhier: bug fixes, refactorings and new features   Masahiro YAMADA
• [U-Boot] Pull request: u-boot-uniphier   Masahiro YAMADA
• [U-Boot] [RFC PATCH 0/21] ARM: start to move SoC code into arch/arm/mach-*   Masahiro Yamada
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Masahiro Yamada
• [U-Boot] [PATCH] ARM: UniPhier: remove dummy gpio.h   Masahiro Yamada
• [U-Boot] [PATCH 0/2] Refactor EEPROM device tree and add default offset length   Masahiro Yamada
• [U-Boot] [PATCH 1/2] ARM: UniPhier: move EEPROM device node into a separate DTS   Masahiro Yamada
• [U-Boot] [PATCH 2/2] ARM: UniPhier: set I2C offset length of on-board EEPROM in DTS   Masahiro Yamada
• [U-Boot] Zynq Zybo booting with mainline U-Boot   Masahiro Yamada
• [U-Boot] [PATCH V3] cmd_i2c: Provide option for bulk 'i2c write' in one transaction   Masahiro Yamada
• [U-Boot] [PATCH] powerpc, mpc5xx: fix compiler warning   Masahiro Yamada
• [U-Boot] [PATCH] powerpc, mpc5xx: fix compiler warning   Masahiro Yamada
• [U-Boot] [PATCH] powerpc, mpc5xx: fix compiler warning   Masahiro Yamada
• [U-Boot] [RFC PATCH] dm: Add support for all targets which requires MANUAL_RELOC   Masahiro Yamada
• [U-Boot] [PATCH] cmd_i2c: quit I2C commands immediately on error   Masahiro Yamada
• [U-Boot] [PATCH v2 0/6] ARM: UniPhier: add doc, improve I2C EEPROM access   Masahiro Yamada
• [U-Boot] [PATCH v2 1/6] ARM: UniPhier: use "&&" instead of "; " in commands   Masahiro Yamada
• [U-Boot] [PATCH v2 2/6] ARM: UniPhier: add environment variable to update images in NAND   Masahiro Yamada
• [U-Boot] [PATCH v2 3/6] ARM: UniPhier: add a simple README file for UniPhier platform   Masahiro Yamada
• [U-Boot] [PATCH v2 4/6] MAINTAINERS: claim maintainership of files with "uniphier" pattern   Masahiro Yamada
• [U-Boot] [PATCH v2 5/6] ARM: UniPhier: move EEPROM device node into a separate DTS   Masahiro Yamada
• [U-Boot] [PATCH v2 6/6] ARM: UniPhier: set I2C offset length of on-board EEPROM in DTS   Masahiro Yamada
• [U-Boot] [PATCH 0/7] ARM: UniPhier: code refactoring and I2C pin fix   Masahiro Yamada
• [U-Boot] [PATCH 1/7] ARM: UniPhier: move pin_init() to board_early_init_f()   Masahiro Yamada
• [U-Boot] [PATCH 2/7] ARM: UniPhier: move SPL init functions to spl_board_init()   Masahiro Yamada
• [U-Boot] [PATCH 3/7] ARM: UniPhier: revive support card info   Masahiro Yamada
• [U-Boot] [PATCH 4/7] ARM: UniPhier: remove unused checkboard() functions   Masahiro Yamada
• [U-Boot] [PATCH 5/7] ARM: UniPhier: do not compile unnecessary objects   Masahiro Yamada
• [U-Boot] [PATCH 6/7] ARM: UniPhier: consolidate MEMCONF setting code   Masahiro Yamada
• [U-Boot] [PATCH 7/7] ARM: UniPhier: enable I2C input pins for PH1-sLD8   Masahiro Yamada
• [U-Boot] [PATCH 0/2] ARM: UniPhier: refactor pinmon command   Masahiro Yamada
• [U-Boot] [PATCH 1/2] ARM: UniPhier: refactor pinmon command   Masahiro Yamada
• [U-Boot] [PATCH 2/2] ARM: UniPhier: leave the last element of boot_device_table empty   Masahiro Yamada
• [U-Boot] [PATCH v2 12/19] dm: at91: snapper: Move driver model CONFIGs to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v2 04/19] dm: Expand and complete Kconfig in drivers/   Masahiro Yamada
• [U-Boot] [PATCH v2 03/19] dm: Add Kconfig for driver/demo   Masahiro Yamada
• [U-Boot] [PATCH v2 06/19] dm: test: Add a Kconfig file   Masahiro Yamada
• [U-Boot] [PATCH v2 07/19] dm: Add CMD_DM and CMD_DEMO to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v2 13/19] dm: omap3: Move driver model CONFIGs to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH 0/11] ARM: remove non-generic boards   Masahiro Yamada
• [U-Boot] [PATCH 01/11] ARM: remove mx31ads board support   Masahiro Yamada
• [U-Boot] [PATCH 02/11] ARM: mx31: remove imx31_phycore board   Masahiro Yamada
• [U-Boot] [PATCH 03/11] ARM: remove jadecpu board support   Masahiro Yamada
• [U-Boot] [PATCH 04/11] ARM: remove zmx25 board support   Masahiro Yamada
• [U-Boot] [PATCH 05/11] ARM: remove devkit3250 board support   Masahiro Yamada
• [U-Boot] [PATCH 06/11] ARM: remove dkb board support   Masahiro Yamada
• [U-Boot] [PATCH 07/11] ARM: remove cm4008 and cm41xx board support   Masahiro Yamada
• [U-Boot] [PATCH 08/11] ARM: remove a320evb board support   Masahiro Yamada
• [U-Boot] [PATCH 09/11] ARM: armada100: remove aspenite and gplugd board support   Masahiro Yamada
• [U-Boot] [PATCH 10/11] ARM: remove tnetv107x board support   Masahiro Yamada
• [U-Boot] [PATCH 11/11] ARM: davinci: remove hawkboard support   Masahiro Yamada
• [U-Boot] [PATCH 09/11] ARM: armada100: remove aspenite and gplugd board support   Masahiro Yamada
• [U-Boot] [PATCH v2 0/10] ARM: remove non-generic boards   Masahiro Yamada
• [U-Boot] [PATCH v2 01/10] ARM: remove mx31ads board support   Masahiro Yamada
• [U-Boot] [PATCH v2 02/10] ARM: mx31: remove imx31_phycore board   Masahiro Yamada
• [U-Boot] [PATCH v2 03/10] ARM: remove jadecpu board support   Masahiro Yamada
• [U-Boot] [PATCH v2 04/10] ARM: remove zmx25 board support   Masahiro Yamada
• [U-Boot] [PATCH v2 05/10] ARM: remove devkit3250 board support   Masahiro Yamada
• [U-Boot] [PATCH v2 06/10] ARM: remove dkb board support   Masahiro Yamada
• [U-Boot] [PATCH v2 07/10] ARM: remove cm4008 and cm41xx board support   Masahiro Yamada
• [U-Boot] [PATCH v2 08/10] ARM: remove a320evb board support   Masahiro Yamada
• [U-Boot] [PATCH v2 09/10] ARM: remove tnetv107x board support   Masahiro Yamada
• [U-Boot] [PATCH v2 10/10] ARM: davinci: remove hawkboard support   Masahiro Yamada
• [U-Boot] [PATCH 2/3] bcm2836 SoC support (used in Raspberry Pi 2 model B)   Masahiro Yamada
• [U-Boot] [PATCH v2 07/10] ARM: remove cm4008 and cm41xx board support   Masahiro Yamada
• [U-Boot] [PATCH] ARM: move -march=* and -mtune= options to arch/arm/Makefile   Masahiro Yamada
• [U-Boot] [PATCH 0/3] sh: fix private library and use it by default   Masahiro Yamada
• [U-Boot] [PATCH 1/3] sh: rename some private libraries   Masahiro Yamada
• [U-Boot] [PATCH 2/3] sh: import missing private libraries from Linux 3.19   Masahiro Yamada
• [U-Boot] [PATCH 3/3] sh: enable CONFIG_USE_PRIVATE_LIBGCC by default   Masahiro Yamada
• [U-Boot] [PATCH] ARM: enable CONFIG_USE_PRIVATE_LIBGCC by default   Masahiro Yamada
• [U-Boot] [PATCH v3 0/9] ARM: remove non-generic boards   Masahiro Yamada
• [U-Boot] [PATCH v3 1/9] ARM: remove mx31ads board support   Masahiro Yamada
• [U-Boot] [PATCH v3 2/9] ARM: mx31: remove imx31_phycore board   Masahiro Yamada
• [U-Boot] [PATCH v3 3/9] ARM: remove jadecpu board support   Masahiro Yamada
• [U-Boot] [PATCH v3 4/9] ARM: remove zmx25 board support   Masahiro Yamada
• [U-Boot] [PATCH v3 5/9] ARM: remove dkb board support   Masahiro Yamada
• [U-Boot] [PATCH v3 6/9] ARM: remove cm4008 and cm41xx board support   Masahiro Yamada
• [U-Boot] [PATCH v3 7/9] ARM: remove a320evb board support   Masahiro Yamada
• [U-Boot] [PATCH v3 8/9] ARM: remove tnetv107x board support   Masahiro Yamada
• [U-Boot] [PATCH v3 9/9] ARM: davinci: remove hawkboard support   Masahiro Yamada
• [U-Boot] [PATCH v2 05/10] ARM: remove devkit3250 board support   Masahiro Yamada
• [U-Boot] [PATCH v2 07/10] ARM: remove cm4008 and cm41xx board support   Masahiro Yamada
• [U-Boot] [PATCH] Documentation: gpio: fix bindings document   Masahiro Yamada
• [U-Boot] [PATCH 0/14] ARM: UniPhier: bug fixes, refactorings and new features   Masahiro Yamada
• [U-Boot] [PATCH 01/14] ARM: UniPhier: fix comments in PH1-Pro4 SBC code   Masahiro Yamada
• [U-Boot] [PATCH 02/14] ARM: UniPhier: fix SBC init code   Masahiro Yamada
• [U-Boot] [PATCH 03/14] ARM: UniPhier: split clkrst_init() into two functions   Masahiro Yamada
• [U-Boot] [PATCH 04/14] ARM: UniPhier: enable STDMAC for EHCI   Masahiro Yamada
• [U-Boot] [PATCH 05/14] ARM: UniPhier: remove EHCI platform devices   Masahiro Yamada
• [U-Boot] [PATCH 06/14] ARM: UniPhier: move uniphier_ehci_reset() function   Masahiro Yamada
• [U-Boot] [PATCH 07/14] ARM: UniPhier: replace "usb-ehci" with "generic-ehci"   Masahiro Yamada
• [U-Boot] [PATCH 08/14] ARM: UniPhier: add I/O pin settings for xHCI on PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH 09/14] ARM: UniPhier: enable xHCI and GIO cores for PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH 10/14] ARM: UniPhier: add xHCI device nodes to PH1-Pro4 device tree   Masahiro Yamada
• [U-Boot] [PATCH 11/14] usb: UniPhier: add UniPhier on-chip xHCI host driver support   Masahiro Yamada
• [U-Boot] [PATCH 12/14] ARM: UniPhier: switch to xHCI for PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH 13/14] ARM: UniPhier: support 1CS support card for all the UniPhier SoCs   Masahiro Yamada
• [U-Boot] [PATCH 14/14] ARM: UniPhier: consolidate MEMCONF setting code   Masahiro Yamada
• [U-Boot] [PATCH 0/4] kconfig: turnaround into single .config   Masahiro Yamada
• [U-Boot] [PATCH 1/4] ARM: UniPhier: set CONFIG_SYS_MALLOC_F to the global default value   Masahiro Yamada
• [U-Boot] [PATCH 2/4] malloc_f: fix broken .config caused by CONFIG_SYS_MALLOC_F   Masahiro Yamada
• [U-Boot] [PATCH 3/4] kconfig: switch to single .config configuration   Masahiro Yamada
• [U-Boot] [PATCH 4/4] kconfig: remove unneeded dependency on !SPL_BUILD   Masahiro Yamada
• [U-Boot] [PATCH v2 0/4] kconfig: turnaround into single .config   Masahiro Yamada
• [U-Boot] [PATCH v2 1/4] ARM: UniPhier: set CONFIG_SYS_MALLOC_F to the global default value   Masahiro Yamada
• [U-Boot] [PATCH v2 2/4] malloc_f: fix broken .config caused by CONFIG_SYS_MALLOC_F   Masahiro Yamada
• [U-Boot] [PATCH v2 3/4] kconfig: switch to single .config configuration   Masahiro Yamada
• [U-Boot] [PATCH v2 4/4] kconfig: remove unneeded dependency on !SPL_BUILD   Masahiro Yamada
• [U-Boot] [PATCH V3 3/3] rpi: add support for Raspberry Pi 2 model B   Masahiro Yamada
• [U-Boot] [PATCH v2 17/19] powerpc: ppc4xx: Change from OF_SEPARATE to OF_EMBED   Masahiro Yamada
• [U-Boot] [PATCH 1/2] dm: Correct default value for SYS_MALLOC_F   Masahiro Yamada
• [U-Boot] [PATCH v3 0/7] kconfig: turnaround into single .config   Masahiro Yamada
• [U-Boot] [PATCH v3 1/7] ARM: UniPhier: set CONFIG_SYS_MALLOC_F to the global default value   Masahiro Yamada
• [U-Boot] [PATCH v3 2/7] malloc_f: fix broken .config caused by CONFIG_SYS_MALLOC_F   Masahiro Yamada
• [U-Boot] [PATCH v3 3/7] kconfig: Adjust ordering so that defaults work as expected   Masahiro Yamada
• [U-Boot] [PATCH v3 4/7] malloc_f: add ARCH_MALLOC_F_LEN to specify SoC-default malloc_f_len   Masahiro Yamada
• [U-Boot] [PATCH v3 5/7] kconfig: switch to single .config configuration   Masahiro Yamada
• [U-Boot] [PATCH v3 6/7] kconfig: remove unneeded dependency on !SPL_BUILD   Masahiro Yamada
• [U-Boot] [PATCH v3 7/7] malloc_f: enable SYS_MALLOC_F by default if DM is on   Masahiro Yamada
• [U-Boot] [PATCH 1/2] dm: Correct default value for SYS_MALLOC_F   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 0/19] ARM: start to move SoC code into arch/arm/mach-*   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 01/19] ARM: at91: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 02/19] ARM: prepare for moving SoC sources into mach-*   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 03/19] ARM: at91: collect SoC sources into mach-at91   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 04/19] ARM: tegra: collect SoC sources into mach-tegra   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 05/19] ARM: davinci: move SoC sources to mach-davinci   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 06/19] ARM: kirkwood: move SOC sources to mach-kirkwood   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 07/19] ARM: nomadik: move SoC sources to mach-nomadik   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 08/19] ARM: highbank: move SoC sources to mach-highbank   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 09/19] ARM: orion5x: move SoC sources to mach-orion5x   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 10/19] ARM: versatile: move SoC sources to mach-versatile   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 11/19] ARM: keystone: move SoC sources to mach-keystone   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 12/19] kbuild: prepare for moving headers into mach-*/include/mach   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 13/19] ARM: at91: move SoC headers to mach-at91/include/mach   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 14/19] ARM: davinci: move SoC headers to mach-davinci/include/mach   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 15/19] ARM: kirkwood: move SoC headers to mach-kirkwood/include/mach   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 16/19] ARM: nomadik: move SoC headers to mach-nomadik/include/mach   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 17/19] ARM: orion5x: move SoC headers to mach-orion5x/include/mach   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 18/19] ARM: keystone: move SoC headers to mach-keystone/include/mach   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 19/19] ARM: prepare for including <mach/*.h>   Masahiro Yamada
• [U-Boot] [RFC PATCH v2 0/19] ARM: start to move SoC code into arch/arm/mach-*   Masahiro Yamada
• [U-Boot] [PATCH v2 6/8] kconfig: malloc: add option for skip memset at malloc init   Masahiro Yamada
• [U-Boot] [PATCH v3 0/19] ARM: start to move SoC code into arch/arm/mach-*   Masahiro Yamada
• [U-Boot] [PATCH v3 01/19] ARM: at91: move board select menu and common settings   Masahiro Yamada
• [U-Boot] [PATCH v3 02/19] ARM: prepare for moving SoC sources into mach-*   Masahiro Yamada
• [U-Boot] [PATCH v3 03/19] ARM: at91: collect SoC sources into mach-at91   Masahiro Yamada
• [U-Boot] [PATCH v3 04/19] ARM: tegra: collect SoC sources into mach-tegra   Masahiro Yamada
• [U-Boot] [PATCH v3 05/19] ARM: davinci: move SoC sources to mach-davinci   Masahiro Yamada
• [U-Boot] [PATCH v3 06/19] ARM: kirkwood: move SOC sources to mach-kirkwood   Masahiro Yamada
• [U-Boot] [PATCH v3 07/19] ARM: nomadik: move SoC sources to mach-nomadik   Masahiro Yamada
• [U-Boot] [PATCH v3 08/19] ARM: highbank: move SoC sources to mach-highbank   Masahiro Yamada
• [U-Boot] [PATCH v3 09/19] ARM: orion5x: move SoC sources to mach-orion5x   Masahiro Yamada
• [U-Boot] [PATCH v3 10/19] ARM: versatile: move SoC sources to mach-versatile   Masahiro Yamada
• [U-Boot] [PATCH v3 11/19] ARM: keystone: move SoC sources to mach-keystone   Masahiro Yamada
• [U-Boot] [PATCH v3 12/19] kbuild: prepare for moving headers into mach-*/include/mach   Masahiro Yamada
• [U-Boot] [PATCH v3 13/19] ARM: at91: move SoC headers to mach-at91/include/mach   Masahiro Yamada
• [U-Boot] [PATCH v3 14/19] ARM: davinci: move SoC headers to mach-davinci/include/mach   Masahiro Yamada
• [U-Boot] [PATCH v3 15/19] ARM: kirkwood: move SoC headers to mach-kirkwood/include/mach   Masahiro Yamada
• [U-Boot] [PATCH v3 16/19] ARM: nomadik: move SoC headers to mach-nomadik/include/mach   Masahiro Yamada
• [U-Boot] [PATCH v3 17/19] ARM: orion5x: move SoC headers to mach-orion5x/include/mach   Masahiro Yamada
• [U-Boot] [PATCH v3 18/19] ARM: keystone: move SoC headers to mach-keystone/include/mach   Masahiro Yamada
• [U-Boot] [PATCH v3 19/19] ARM: prepare for including <mach/*.h>   Masahiro Yamada
• [U-Boot] [PATCH 0/2] dm: i2c: make request sequence number optional and disable it for UniPhier   Masahiro Yamada
• [U-Boot] [PATCH 1/2] dm: i2c: add DM_I2C_REQ_ALIAS to make sequence number optional   Masahiro Yamada
• [U-Boot] [PATCH 2/2] ARM: UniPhier: disable DM_I2C_REQ_ALIAS to drop I2C aliases   Masahiro Yamada
• [U-Boot] [PATCH 11/14] usb: UniPhier: add UniPhier on-chip xHCI host driver support   Masahiro Yamada
• [U-Boot] [PATCH v2 0/16] ARM: UniPhier: bug fixes, refactorings and new features   Masahiro Yamada
• [U-Boot] [PATCH v2 01/16] ARM: UniPhier: fix comments in PH1-Pro4 SBC code   Masahiro Yamada
• [U-Boot] [PATCH v2 02/16] ARM: UniPhier: fix SBC init code   Masahiro Yamada
• [U-Boot] [PATCH v2 03/16] ARM: UniPhier: split clkrst_init() into two functions   Masahiro Yamada
• [U-Boot] [PATCH v2 04/16] ARM: UniPhier: reset NAND core in SPL for non-NAND boot mode   Masahiro Yamada
• [U-Boot] [PATCH v2 05/16] ARM: UniPhier: enable STDMAC for EHCI   Masahiro Yamada
• [U-Boot] [PATCH v2 06/16] ARM: UniPhier: remove EHCI platform devices   Masahiro Yamada
• [U-Boot] [PATCH v2 07/16] ARM: UniPhier: move uniphier_ehci_reset() function   Masahiro Yamada
• [U-Boot] [PATCH v2 08/16] ARM: UniPhier: replace "usb-ehci" with "generic-ehci"   Masahiro Yamada
• [U-Boot] [PATCH v2 09/16] ARM: UniPhier: add I/O pin settings for xHCI on PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH v2 10/16] ARM: UniPhier: enable xHCI and GIO cores for PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH v2 11/16] ARM: UniPhier: add xHCI device nodes to PH1-Pro4 device tree   Masahiro Yamada
• [U-Boot] [PATCH v2 12/16] usb: UniPhier: add UniPhier on-chip xHCI host driver support   Masahiro Yamada
• [U-Boot] [PATCH v2 13/16] ARM: UniPhier: switch to xHCI for PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH v2 14/16] ARM: UniPhier: support 1CS support card for all the UniPhier SoCs   Masahiro Yamada
• [U-Boot] [PATCH v2 15/16] ARM: UniPhier: switch to 1CS support card   Masahiro Yamada
• [U-Boot] [PATCH v2 16/16] ARM: UniPhier: consolidate MEMCONF setting code   Masahiro Yamada
• [U-Boot] [PATCH v3 4/6] dlmalloc: add option for skip memset in malloc init   Masahiro Yamada
• [U-Boot] [PATCH 11/14] usb: UniPhier: add UniPhier on-chip xHCI host driver support   Masahiro Yamada
• [U-Boot] [PATCH v4 0/6] kconfig: turnaround into single .config   Masahiro Yamada
• [U-Boot] [PATCH v4 1/6] ARM: UniPhier: set CONFIG_SYS_MALLOC_F to the global default value   Masahiro Yamada
• [U-Boot] [PATCH v4 2/6] malloc_f: fix broken .config caused by CONFIG_SYS_MALLOC_F   Masahiro Yamada
• [U-Boot] [PATCH v4 3/6] kconfig: Adjust ordering so that defaults work as expected   Masahiro Yamada
• [U-Boot] [PATCH v4 4/6] kconfig: switch to single .config configuration   Masahiro Yamada
• [U-Boot] [PATCH v4 5/6] kconfig: remove unneeded dependency on !SPL_BUILD   Masahiro Yamada
• [U-Boot] [PATCH v4 6/6] malloc_f: enable SYS_MALLOC_F by default if DM is on   Masahiro Yamada
• [U-Boot] [PATCH v4 0/9] ARM: remove non-generic boards   Masahiro Yamada
• [U-Boot] [PATCH v4 1/9] ARM: remove mx31ads board support   Masahiro Yamada
• [U-Boot] [PATCH v4 2/9] ARM: mx31: remove imx31_phycore board   Masahiro Yamada
• [U-Boot] [PATCH v4 3/9] ARM: remove jadecpu board support   Masahiro Yamada
• [U-Boot] [PATCH v4 4/9] ARM: remove zmx25 board support   Masahiro Yamada
• [U-Boot] [PATCH v4 5/9] ARM: remove dkb board support   Masahiro Yamada
• [U-Boot] [PATCH v4 6/9] ARM: remove cm4008 and cm41xx board support   Masahiro Yamada
• [U-Boot] [PATCH v4 7/9] ARM: remove a320evb board support   Masahiro Yamada
• [U-Boot] [PATCH v4 8/9] ARM: remove tnetv107x board support   Masahiro Yamada
• [U-Boot] [PATCH v4 9/9] ARM: davinci: remove hawkboard support   Masahiro Yamada
• [U-Boot] Weird error message on buildman   Masahiro Yamada
• [U-Boot] [PATCH v3 0/20] ARM: UniPhier: bug fixes, refactorings and new features   Masahiro Yamada
• [U-Boot] [PATCH v3 01/20] ARM: UniPhier: move SoC sources to mach-uniphier   Masahiro Yamada
• [U-Boot] [PATCH v3 02/20] ARM: UniPhier: move SoC headers to mach-uniphier/include/mach   Masahiro Yamada
• [U-Boot] [PATCH v3 03/20] ARM: UniPhier: include <mach/*.h> instead of <asm/arch/*.h>   Masahiro Yamada
• [U-Boot] [PATCH v3 04/20] ARM: UniPhier: fix comments in PH1-Pro4 SBC code   Masahiro Yamada
• [U-Boot] [PATCH v3 05/20] ARM: UniPhier: fix SBC init code   Masahiro Yamada
• [U-Boot] [PATCH v3 06/20] ARM: UniPhier: split clkrst_init() into two functions   Masahiro Yamada
• [U-Boot] [PATCH v3 07/20] ARM: UniPhier: reset NAND core in SPL for non-NAND boot mode   Masahiro Yamada
• [U-Boot] [PATCH v3 08/20] ARM: UniPhier: enable STDMAC for EHCI   Masahiro Yamada
• [U-Boot] [PATCH v3 09/20] ARM: UniPhier: remove EHCI platform devices   Masahiro Yamada
• [U-Boot] [PATCH v3 10/20] ARM: UniPhier: move uniphier_ehci_reset() function   Masahiro Yamada
• [U-Boot] [PATCH v3 11/20] ARM: UniPhier: replace "usb-ehci" with "generic-ehci"   Masahiro Yamada
• [U-Boot] [PATCH v3 12/20] ARM: UniPhier: add I/O pin settings for xHCI on PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH v3 13/20] ARM: UniPhier: enable xHCI and GIO cores for PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH v3 14/20] ARM: UniPhier: add xHCI device nodes to PH1-Pro4 device tree   Masahiro Yamada
• [U-Boot] [PATCH v3 15/20] usb: UniPhier: add UniPhier on-chip xHCI host driver support   Masahiro Yamada
• [U-Boot] [PATCH v3 16/20] ARM: UniPhier: switch to xHCI for PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH v3 17/20] ARM: UniPhier: support 1CS support card for all the UniPhier SoCs   Masahiro Yamada
• [U-Boot] [PATCH v3 18/20] ARM: UniPhier: switch to 1CS support card   Masahiro Yamada
• [U-Boot] [PATCH v3 19/20] ARM: UniPhier: consolidate MEMCONF setting code   Masahiro Yamada
• [U-Boot] [PATCH v3 20/20] ARM: UniPhier: remove stop_mpll() from PH1-Pro4 PLL initialization   Masahiro Yamada
• [U-Boot] [PATCH v5 0/6] ARM: remove non-generic boards   Masahiro Yamada
• [U-Boot] [PATCH v5 1/6] ARM: remove jadecpu board support   Masahiro Yamada
• [U-Boot] [PATCH v5 2/6] ARM: remove dkb board support   Masahiro Yamada
• [U-Boot] [PATCH v5 3/6] ARM: remove cm4008 and cm41xx board support   Masahiro Yamada
• [U-Boot] [PATCH v5 4/6] ARM: remove a320evb board support   Masahiro Yamada
• [U-Boot] [PATCH v5 5/6] ARM: remove tnetv107x board support   Masahiro Yamada
• [U-Boot] [PATCH v5 6/6] ARM: davinci: remove hawkboard support   Masahiro Yamada
• [U-Boot] [PATCH v4 1/9] ARM: remove mx31ads board support   Masahiro Yamada
• [U-Boot] [PATCH 1/2] dm: i2c: add DM_I2C_REQ_ALIAS to make sequence number optional   Masahiro Yamada
• [U-Boot] [PATCH v4 0/20] ARM: UniPhier: bug fixes, refactorings and new features   Masahiro Yamada
• [U-Boot] [PATCH v4 01/20] ARM: UniPhier: move SoC sources to mach-uniphier   Masahiro Yamada
• [U-Boot] [PATCH v4 02/20] ARM: UniPhier: move SoC headers to mach-uniphier/include/mach   Masahiro Yamada
• [U-Boot] [PATCH v4 03/20] ARM: UniPhier: include <mach/*.h> instead of <asm/arch/*.h>   Masahiro Yamada
• [U-Boot] [PATCH v4 04/20] ARM: UniPhier: fix comments in PH1-Pro4 SBC code   Masahiro Yamada
• [U-Boot] [PATCH v4 05/20] ARM: UniPhier: fix SBC init code   Masahiro Yamada
• [U-Boot] [PATCH v4 06/20] ARM: UniPhier: split clkrst_init() into two functions   Masahiro Yamada
• [U-Boot] [PATCH v4 07/20] ARM: UniPhier: reset NAND core in SPL for non-NAND boot mode   Masahiro Yamada
• [U-Boot] [PATCH v4 08/20] ARM: UniPhier: enable STDMAC for EHCI   Masahiro Yamada
• [U-Boot] [PATCH v4 09/20] ARM: UniPhier: remove EHCI platform devices   Masahiro Yamada
• [U-Boot] [PATCH v4 10/20] ARM: UniPhier: move uniphier_ehci_reset() function   Masahiro Yamada
• [U-Boot] [PATCH v4 11/20] ARM: UniPhier: replace "usb-ehci" with "generic-ehci"   Masahiro Yamada
• [U-Boot] [PATCH v4 12/20] ARM: UniPhier: add I/O pin settings for xHCI on PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH v4 13/20] ARM: UniPhier: enable xHCI and GIO cores for PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH v4 14/20] ARM: UniPhier: add xHCI device nodes to PH1-Pro4 device tree   Masahiro Yamada
• [U-Boot] [PATCH v4 15/20] usb: UniPhier: add UniPhier on-chip xHCI host driver support   Masahiro Yamada
• [U-Boot] [PATCH v4 16/20] ARM: UniPhier: switch to xHCI for PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH v4 17/20] ARM: UniPhier: support 1CS support card for all the UniPhier SoCs   Masahiro Yamada
• [U-Boot] [PATCH v4 18/20] ARM: UniPhier: switch to 1CS support card   Masahiro Yamada
• [U-Boot] [PATCH v4 19/20] ARM: UniPhier: consolidate MEMCONF setting code   Masahiro Yamada
• [U-Boot] [PATCH v4 20/20] ARM: UniPhier: remove stop_mpll() from PH1-Pro4 PLL initialization   Masahiro Yamada
• [U-Boot] [PATCH 11/14] usb: UniPhier: add UniPhier on-chip xHCI host driver support   Masahiro Yamada
• [U-Boot] [PATCH v3 6/7] kconfig: remove unneeded dependency on !SPL_BUILD   Masahiro Yamada
• [U-Boot] [PATCH v2 3/4] kconfig: switch to single .config configuration   Masahiro Yamada
• [U-Boot] [PATCH v3 5/7] kconfig: switch to single .config configuration   Masahiro Yamada
• [U-Boot] [PATCH] MAINTAINERS: add Driver Model repository information   Masahiro Yamada
• [U-Boot] [PATCH v5 0/4] kconfig: turnaround into single .config   Masahiro Yamada
• [U-Boot] [PATCH v5 1/4] ARM: UniPhier: set CONFIG_SYS_MALLOC_F to the global default value   Masahiro Yamada
• [U-Boot] [PATCH v5 2/4] kconfig: Adjust ordering so that defaults work as expected   Masahiro Yamada
• [U-Boot] [PATCH v5 3/4] kconfig: switch to single .config configuration   Masahiro Yamada
• [U-Boot] [PATCH v5 4/4] kconfig: remove unneeded dependency on !SPL_BUILD   Masahiro Yamada
• [U-Boot] [PATCH v3 6/7] kconfig: remove unneeded dependency on !SPL_BUILD   Masahiro Yamada
• [U-Boot] [PATCH v3 5/7] kconfig: switch to single .config configuration   Masahiro Yamada
• [U-Boot] [PATCH] README: remove description about driver model configuration options   Masahiro Yamada
• [U-Boot] [PATCH v5 0/26] ARM: UniPhier: bug fixes, refactorings and new features   Masahiro Yamada
• [U-Boot] [PATCH v5 01/26] ARM: UniPhier: move SoC sources to mach-uniphier   Masahiro Yamada
• [U-Boot] [PATCH v5 02/26] ARM: UniPhier: move SoC headers to mach-uniphier/include/mach   Masahiro Yamada
• [U-Boot] [PATCH v5 03/26] ARM: UniPhier: include <mach/*.h> instead of <asm/arch/*.h>   Masahiro Yamada
• [U-Boot] [PATCH v5 04/26] ARM: UniPhier: update defconfigs using savedefconfig   Masahiro Yamada
• [U-Boot] [PATCH v5 05/26] serial: UniPhier: use 32 bit register access   Masahiro Yamada
• [U-Boot] [PATCH v5 06/26] serial: UniPhier: move LCR register setting to probe function   Masahiro Yamada
• [U-Boot] [PATCH v5 07/26] ARM: UniPhier: fix comments in PH1-Pro4 SBC code   Masahiro Yamada
• [U-Boot] [PATCH v5 08/26] ARM: UniPhier: fix SBC init code   Masahiro Yamada
• [U-Boot] [PATCH v5 09/26] ARM: UniPhier: rename SC_CLKCTRL_CLK_* to SC_SCLKCTRL_CEN_*   Masahiro Yamada
• [U-Boot] [PATCH v5 10/26] ARM: UniPhier: split clkrst_init() into two functions   Masahiro Yamada
• [U-Boot] [PATCH v5 11/26] ARM: UniPhier: reset NAND core in SPL for non-NAND boot mode   Masahiro Yamada
• [U-Boot] [PATCH v5 12/26] ARM: UniPhier: enable STDMAC for EHCI   Masahiro Yamada
• [U-Boot] [PATCH v5 13/26] ARM: UniPhier: remove EHCI platform devices   Masahiro Yamada
• [U-Boot] [PATCH v5 14/26] ARM: UniPhier: move uniphier_ehci_reset() function   Masahiro Yamada
• [U-Boot] [PATCH v5 15/26] ARM: UniPhier: replace "usb-ehci" with "generic-ehci"   Masahiro Yamada
• [U-Boot] [PATCH v5 16/26] ARM: UniPhier: add I/O pin settings for xHCI on PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH v5 17/26] ARM: UniPhier: enable xHCI and GIO cores for PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH v5 18/26] ARM: UniPhier: add xHCI device nodes to PH1-Pro4 device tree   Masahiro Yamada
• [U-Boot] [PATCH v5 19/26] usb: UniPhier: add UniPhier on-chip xHCI host driver support   Masahiro Yamada
• [U-Boot] [PATCH v5 20/26] ARM: UniPhier: switch to xHCI for PH1-Pro4   Masahiro Yamada
• [U-Boot] [PATCH v5 21/26] ARM: UniPhier: support 1CS support card for all the UniPhier SoCs   Masahiro Yamada
• [U-Boot] [PATCH v5 22/26] ARM: UniPhier: switch to 1CS support card   Masahiro Yamada
• [U-Boot] [PATCH v5 23/26] ARM: UniPhier: consolidate MEMCONF setting code   Masahiro Yamada
• [U-Boot] [PATCH v5 24/26] ARM: UniPhier: remove stop_mpll() from PH1-Pro4 PLL initialization   Masahiro Yamada
• [U-Boot] [PATCH v5 25/26] ARM: UniPhier: remove SSC_WAY_SIZE and SSC_NUM_ENTRIES macros   Masahiro Yamada
• [U-Boot] [PATCH v5 26/26] ARM: UniPhier: move CONFIG_SYS_TEXT_BASE to Kconfig   Masahiro Yamada
• [U-Boot] [PATCH v2] ARM: move -march=* and -mtune= options to arch/arm/Makefile   Masahiro Yamada
• [U-Boot] [PATCH] fixdep: remove multiple .config support code   Masahiro Yamada
• [U-Boot] [PATCH] kconfig: remove unneeded U-Boot extension code   Masahiro Yamada
• [U-Boot] [PATCH 1/4] mx6sx: pins: Enable SION for I2C3 iomux setting   Li Ye-B37916
• [U-Boot] [PATCH 2/4] mx6: soc: Add ENET2 support   Li Ye-B37916
• [U-Boot] [PATCH 3/4] mx6: clock: Modify GPMI clock to support mx6sx   Li Ye-B37916
• [U-Boot] [PATCH 4/4] imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO board   Li Ye-B37916
• [U-Boot] [PATCH v2 05/10] ARM: remove devkit3250 board support   Vladimir Zapolskiy
• [U-Boot] [PATCH v2 0/10] ARM: remove non-generic boards   Vladimir Zapolskiy
• [U-Boot] [PATCH v2 05/10] ARM: remove devkit3250 board support   Vladimir Zapolskiy
• [U-Boot] [PATCH] ARM: lpc3250: config: add generic board support   Vladimir Zapolskiy
• [U-Boot] [PATCH v2 05/10] ARM: remove devkit3250 board support   Vladimir Zapolskiy
• [U-Boot] Pull request: u-boot-blackfin   Sonic Zhang
• [U-Boot] [PATCH 00/12] various fixes mainly for pxa and colibri_pxa270   Marcel Ziswiler
• [U-Boot] [PATCH 01/12] pxa: fix wrong comment about vpac270 being the arch number   Marcel Ziswiler
• [U-Boot] [PATCH 02/12] remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ   Marcel Ziswiler
• [U-Boot] [PATCH 03/12] pxa: balloon3: remove nowhere used symbol CONFIG_SYS_MEM_BUF_IMP   Marcel Ziswiler
• [U-Boot] [PATCH 04/12] pxa: balloon3: fix comment about sdram banks   Marcel Ziswiler
• [U-Boot] [PATCH 05/12] pxa: balloon3/colibri_pxa270: fix environment optionally being nowhere   Marcel Ziswiler
• [U-Boot] [PATCH 06/12] pxa: colibri_pxa270: migrate to generic board   Marcel Ziswiler
• [U-Boot] [PATCH 07/12] pxa: colibri_pxa270: disable loadb/s commands and long help   Marcel Ziswiler
• [U-Boot] [PATCH 08/12] pxa: colibri_pxa270: avoid overwriting factory configuration block   Marcel Ziswiler
• [U-Boot] [PATCH 09/12] pxa: colibri_pax270: fix CONFIG_BOOTCOMMAND   Marcel Ziswiler
• [U-Boot] [PATCH 10/12] pxa: colibri_pxa270: fix wrong comment about voipac ethernet chip   Marcel Ziswiler
• [U-Boot] [PATCH 11/12] pxa: colibri_pxa270: remove CONFIG_ENV_ADDR_REDUND   Marcel Ziswiler
• [U-Boot] [PATCH 12/12] pxa: colibri_pxa270: integrate latest validated register settings   Marcel Ziswiler
• [U-Boot] [PATCH 0/4] various fixes for apalis/colibri_t30   Marcel Ziswiler
• [U-Boot] [PATCH 1/4] dm: tegra: dts: add aliases for spi on apalis_t30   Marcel Ziswiler
• [U-Boot] [PATCH 2/4] apalis/colibri_t30: fix MMC/SD card detect GPIOs   Marcel Ziswiler
• [U-Boot] [PATCH 3/4] apalis_t30: enable gigabit ethernet via pcie   Marcel Ziswiler
• [U-Boot] [PATCH 4/4] apalis/colibri_t30: add misc cmds increase buf sizes and max args   Marcel Ziswiler
• [U-Boot] [PATCH] ARM: HYP/non-sec: relocation before enable secondary cores   Marc Zyngier
• [U-Boot] [PATCH v3 06/13] ARM: HYP/non-sec: allow relocation to secure RAM   Marc Zyngier
• [U-Boot] [PATCH v4 04/14] ARM: Factor out reusable psci_cpu_entry   Marc Zyngier
• [U-Boot] [PATCH v4 03/14] ARM: Factor out reusable psci_cpu_off_common   Marc Zyngier
• [U-Boot] [PATCH v4 02/14] ARM: Factor out armv7_get_cpu_id macro   Marc Zyngier
• [U-Boot] unassigned-patches/128: [PATCH] x86: minnowmax: add GPIO mapping support   u-boot at bugs.denx.de
• [U-Boot] unassigned-patches/131: Re: [PATCH] x86: minnowmax: add GPIO mapping support   u-boot at bugs.denx.de
• [U-Boot] unassigned-patches/132: Re: [PATCH] x86: minnowmax: add GPIO mapping support   u-boot at bugs.denx.de
• [U-Boot] unassigned-patches/133: Re: [PATCH] x86: minnowmax: add GPIO mapping support   u-boot at bugs.denx.de
• [U-Boot] unassigned-patches/134: Re: [PATCH] x86: minnowmax: add GPIO mapping support   u-boot at bugs.denx.de
• [U-Boot] unassigned-patches/135: Re: [PATCH] x86: minnowmax: add GPIO mapping support   u-boot at bugs.denx.de
• [U-Boot] unassigned-patches/136: Re: [PATCH] x86: minnowmax: add GPIO mapping support   u-boot at bugs.denx.de
• [U-Boot] [PATCH v2] mtd: nand: omap_gpmc: Make ready/busy pins configurable   sojkam1 at fel.cvut.cz
• [U-Boot] [PATCH v1]dm : spi: Convert Freescale DSPI to driver model   Haikun.Wang at freescale.com
• [U-Boot] [PATCH] imx6: Added DEK blob generator command   Ulises.Cardenas at freescale.com
• [U-Boot] [PATCH v2] imx6: Added DEK blob generator command   Ulises.Cardenas at freescale.com
• [U-Boot] [PATCH v3] imx6: Added DEK blob generator command   Ulises.Cardenas at freescale.com
• [U-Boot] [PATCH v4] imx6: Added DEK blob generator command   Ulises.Cardenas at freescale.com
• [U-Boot] [PATCH v5] imx6: Added DEK blob generator command   Ulises.Cardenas at freescale.com
• [U-Boot] [U-Boot, 1/2, v4] powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041   aneesh.bansal at freescale.com
• [U-Boot] [U-Boot, 1/2, v4] powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041   aneesh.bansal at freescale.com
• [U-Boot] [PATCH] sun7i: Add support for the MK808C board   codekipper at gmail.com
• [U-Boot] [PATCH] sun6i: Add support for the Mele I7 board   codekipper at gmail.com
• [U-Boot] [U-boot][PATCH] keystone2: add support for UART download   menon.nishanth at gmail.com
• [U-Boot] [PATCH V2 8/9] configs: ti_omap3_common: Enable workaround for ARM errata 454179, 430973, 621766   menon.nishanth at gmail.com
• [U-Boot] [PATCH] x86: minnowmax: add GPIO mapping support   gabriel huau
• [U-Boot] [PATCH] arm: mx5: Add support for USB armory board   andrej at inversepath.com
• [U-Boot] [PATCH 18/20] Add Chrome OS config header   thomas.langer at lantiq.com
• [U-Boot] [PATCH] PCI: add 64-bit prefetchable memory support   fenghua at phytium.com.cn
• [U-Boot] [PATCH v2] PCI: add 64-bit prefetchable memory support   fenghua at phytium.com.cn
• [U-Boot] [RFC PATCH] ARMv8: replace CONFIG_ARM64 with builtin __aarch64__   fenghua at phytium.com.cn
• [U-Boot] [RFC PATCH] ARMv8: add Kconfig and CPU_V8 option   fenghua at phytium.com.cn
• [U-Boot] [PATCH] ARMv8: Bug fix of dcache_disable()   fenghua at phytium.com.cn
• [U-Boot] [PATCH v3 06/13] ARM: HYP/non-sec: allow relocation to secure RAM   surya.satyavolu at sirabtech.com