[U-Boot] [PATCH 1/4] ARM: OMAP: Change set_pl310_ctrl_reg to be generic

Nishanth Menon nm at ti.com
Wed Feb 18 00:14:53 CET 2015


set_pl310_ctrl_reg does use the Secure Monitor Call (SMC) to setup
PL310 control register, however, that is something that is generic
enough to be used for OMAP5 generation of processors as well. The
only difference being the service being invoked for the function.

So, convert the service to a macro and use a generic name (same as
that used in Linux for some consistency). While at that, also add
a data barrier which is necessary as per recommendation.

Signed-off-by: Nishanth Menon <nm at ti.com>
---
 arch/arm/cpu/armv7/omap-common/lowlevel_init.S |    8 +++++---
 arch/arm/cpu/armv7/omap4/hwinit.c              |    4 ++--
 arch/arm/include/asm/arch-omap4/sys_proto.h    |    5 ++++-
 3 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 86c0e4217478..cc3603d798e9 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -22,11 +22,13 @@ ENTRY(save_boot_params)
 	bx	lr
 ENDPROC(save_boot_params)
 
-ENTRY(set_pl310_ctrl_reg)
+ENTRY(omap_smc1)
 	PUSH	{r4-r11, lr}	@ save registers - ROM code may pollute
 				@ our registers
-	LDR	r12, =0x102	@ Set PL310 control register - value in R0
+	MOV	r12, r0		@ Service
+	MOV	r0, r1		@ Argument
+	DSB
 	.word	0xe1600070	@ SMC #0 - hand assembled because -march=armv5
 				@ call ROM Code API to set control register
 	POP	{r4-r11, pc}
-ENDPROC(set_pl310_ctrl_reg)
+ENDPROC(omap_smc1)
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
index db16548fac49..9792761d40a0 100644
--- a/arch/arm/cpu/armv7/omap4/hwinit.c
+++ b/arch/arm/cpu/armv7/omap4/hwinit.c
@@ -159,11 +159,11 @@ void init_omap_revision(void)
 #ifndef CONFIG_SYS_L2CACHE_OFF
 void v7_outer_cache_enable(void)
 {
-	set_pl310_ctrl_reg(1);
+	omap_smc1(OMAP4_SERVICE_PL310_CONTROL_REG_SET, 1);
 }
 
 void v7_outer_cache_disable(void)
 {
-	set_pl310_ctrl_reg(0);
+	omap_smc1(OMAP4_SERVICE_PL310_CONTROL_REG_SET, 0);
 }
 #endif /* !CONFIG_SYS_L2CACHE_OFF */
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index e19975efaf50..f425e3af54f5 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -37,7 +37,7 @@ void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
 void set_muxconf_regs_essential(void);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
-void set_pl310_ctrl_reg(u32 val);
+void omap_smc1(u32 service, u32 val);
 void setup_clocks_for_console(void);
 void prcm_init(void);
 void bypass_dpll(u32 const base);
@@ -57,4 +57,7 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
 u32 warm_reset(void);
 void force_emif_self_refresh(void);
 void setup_warmreset_time(void);
+
+#define OMAP4_SERVICE_PL310_CONTROL_REG_SET	0x102
+
 #endif
-- 
1.7.9.5



More information about the U-Boot mailing list