[U-Boot] [PATCH v2 3/8] lpc32xx: i2c: add LPC32xx I2C interface support

Heiko Schocher hs at denx.de
Fri Feb 13 11:48:26 CET 2015


Hello Albert,

Am 12.02.2015 18:37, schrieb Albert ARIBAUD (3ADEV):
> Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud at 3adev.fr>
> ---
>
> Changes in v2: None
>
>   arch/arm/cpu/arm926ejs/lpc32xx/devices.c      |  11 ++
>   arch/arm/include/asm/arch-lpc32xx/clk.h       |   4 +
>   arch/arm/include/asm/arch-lpc32xx/cpu.h       |   2 +
>   arch/arm/include/asm/arch-lpc32xx/sys_proto.h |   1 +
>   drivers/i2c/Makefile                          |   1 +
>   drivers/i2c/lpc32xx_i2c.c                     | 249 ++++++++++++++++++++++++++
>   6 files changed, 268 insertions(+)
>   create mode 100644 drivers/i2c/lpc32xx_i2c.c

Acked-by: Heiko Schocher <hs at denx.de>

Do you have a chance to use DM on this HW?

bye,
Heiko
>
> diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
> index be4c93d..81b53ea 100644
> --- a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
> +++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
> @@ -50,3 +50,14 @@ void lpc32xx_mlc_nand_init(void)
>   	/* Enable NAND interface */
>   	writel(CLK_NAND_MLC | CLK_NAND_MLC_INT, &clk->flashclk_ctrl);
>   }
> +
> +void lpc32xx_i2c_init(unsigned int devnum)
> +{
> +	/* Enable I2C interface */
> +	uint32_t ctrl = readl(&clk->i2cclk_ctrl);
> +	if (devnum == 1)
> +		ctrl |= CLK_I2C1_ENABLE;
> +	if (devnum == 2)
> +		ctrl |= CLK_I2C2_ENABLE;
> +	writel(ctrl, &clk->i2cclk_ctrl);
> +}
> diff --git a/arch/arm/include/asm/arch-lpc32xx/clk.h b/arch/arm/include/asm/arch-lpc32xx/clk.h
> index bc7d33d..781ac07 100644
> --- a/arch/arm/include/asm/arch-lpc32xx/clk.h
> +++ b/arch/arm/include/asm/arch-lpc32xx/clk.h
> @@ -123,6 +123,10 @@ struct clk_pm_regs {
>   #define CLK_MAC_SLAVE			(1 << 1)
>   #define CLK_MAC_REG			(1 << 0)
>
> +/* I2C Clock Control Register bits	*/
> +#define CLK_I2C2_ENABLE			(1 << 1)
> +#define CLK_I2C1_ENABLE			(1 << 0)
> +
>   /* Timer Clock Control1 Register bits */
>   #define CLK_TIMCLK_MOTOR		(1 << 6)
>   #define CLK_TIMCLK_TIMER3		(1 << 5)
> diff --git a/arch/arm/include/asm/arch-lpc32xx/cpu.h b/arch/arm/include/asm/arch-lpc32xx/cpu.h
> index 199b4a0..1067107 100644
> --- a/arch/arm/include/asm/arch-lpc32xx/cpu.h
> +++ b/arch/arm/include/asm/arch-lpc32xx/cpu.h
> @@ -37,6 +37,8 @@
>   #define UART4_BASE	0x40088000	/* UART 4 registers base            */
>   #define UART5_BASE	0x40090000	/* UART 5 registers base            */
>   #define UART6_BASE	0x40098000	/* UART 6 registers base            */
> +#define I2C1_BASE	0x400A0000	/* I2C  1 registers base            */
> +#define I2C2_BASE	0x400A8000	/* I2C  2 registers base            */
>
>   /* External SDRAM Memory Bank base addresses */
>   #define EMC_DYCS0_BASE	0x80000000	/* SDRAM DYCS0 base address         */
> diff --git a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
> index 0c4e712..a4a05d1 100644
> --- a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
> +++ b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
> @@ -10,5 +10,6 @@
>   void lpc32xx_uart_init(unsigned int uart_id);
>   void lpc32xx_mac_init(void);
>   void lpc32xx_mlc_nand_init(void);
> +void lpc32xx_i2c_init(unsigned int devnum);
>
>   #endif /* _LPC32XX_SYS_PROTO_H */
> diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
> index 774bc94..26ea854 100644
> --- a/drivers/i2c/Makefile
> +++ b/drivers/i2c/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
>   obj-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
>   obj-$(CONFIG_SYS_I2C_IHS) += ihs_i2c.o
>   obj-$(CONFIG_SYS_I2C_KONA) += kona_i2c.o
> +obj-$(CONFIG_SYS_I2C_LPC32XX) += lpc32xx_i2c.o
>   obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o
>   obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
>   obj-$(CONFIG_SYS_I2C_MXS) += mxs_i2c.o
> diff --git a/drivers/i2c/lpc32xx_i2c.c b/drivers/i2c/lpc32xx_i2c.c
> new file mode 100644
> index 0000000..78d26e4
> --- /dev/null
> +++ b/drivers/i2c/lpc32xx_i2c.c
> @@ -0,0 +1,249 @@
> +/*
> + * LPC32xx I2C interface driver
> + *
> + * (C) Copyright 2014  DENX Software Engineering GmbH
> + * Written-by: Albert ARIBAUD - 3ADEV <albert.aribaud at 3adev.fr>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <i2c.h>
> +#include <asm/errno.h>
> +#include <asm/arch/clk.h>
> +
> +/*
> + * Provide default speed and slave if target did not
> + */
> +
> +#if !defined(CONFIG_SYS_I2C_LPC32XX_SPEED)
> +#define CONFIG_SYS_I2C_LPC32XX_SPEED 350000
> +#endif
> +
> +#if !defined(CONFIG_SYS_I2C_LPC32XX_SLAVE)
> +#define CONFIG_SYS_I2C_LPC32XX_SLAVE 0
> +#endif
> +
> +/* i2c register set */
> +struct lpc32xx_i2c_registers {
> +	union {
> +		u32 rx;
> +		u32 tx;
> +	};
> +	u32 stat;
> +	u32 ctrl;
> +	u32 clk_hi;
> +	u32 clk_lo;
> +	u32 adr;
> +	u32 rxfl;
> +	u32 txfl;
> +	u32 rxb;
> +	u32 txb;
> +	u32 stx;
> +	u32 stxfl;
> +};
> +
> +/* TX register fields */
> +#define LPC32XX_I2C_TX_START		0x00000100
> +#define LPC32XX_I2C_TX_STOP		0x00000200
> +
> +/* Control register values */
> +#define LPC32XX_I2C_SOFT_RESET		0x00000100
> +
> +/* Status register values */
> +#define LPC32XX_I2C_STAT_TFF		0x00000400
> +#define LPC32XX_I2C_STAT_RFE		0x00000200
> +#define LPC32XX_I2C_STAT_DRMI		0x00000008
> +#define LPC32XX_I2C_STAT_NAI		0x00000004
> +#define LPC32XX_I2C_STAT_TDI		0x00000001
> +
> +static struct lpc32xx_i2c_registers *lpc32xx_i2c[] = {
> +	(struct lpc32xx_i2c_registers *)I2C1_BASE,
> +	(struct lpc32xx_i2c_registers *)I2C2_BASE
> +};
> +
> +/* Set I2C bus speed */
> +static unsigned int lpc32xx_i2c_set_bus_speed(struct i2c_adapter *adap,
> +			unsigned int speed)
> +{
> +	int half_period;
> +
> +	if (speed == 0)
> +		return -EINVAL;
> +
> +	half_period = (105000000 / speed) / 2;
> +
> +	if ((half_period > 255) || (half_period < 0))
> +		return -EINVAL;
> +
> +	writel(half_period, &lpc32xx_i2c[adap->hwadapnr]->clk_hi);
> +	writel(half_period, &lpc32xx_i2c[adap->hwadapnr]->clk_lo);
> +	return 0;
> +}
> +
> +/* I2C init called by cmd_i2c when doing 'i2c reset'. */
> +static void _i2c_init(struct i2c_adapter *adap,
> +	int requested_speed, int slaveadd)
> +{
> +	struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr];
> +
> +	/* soft reset (auto-clears) */
> +	writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl);
> +	/* set HI and LO periods for about 350 kHz */
> +	lpc32xx_i2c_set_bus_speed(adap, requested_speed);
> +}
> +
> +/* I2C probe called by cmd_i2c when doing 'i2c probe'. */
> +static int lpc32xx_i2c_probe(struct i2c_adapter *adap, u8 dev)
> +{
> +	struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr];
> +	int stat;
> +
> +	/* Soft-reset the controller */
> +	writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl);
> +	while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET)
> +		;
> +	/* Addre slave for write with start before and stop after */
> +	writel((dev<<1) | LPC32XX_I2C_TX_START | LPC32XX_I2C_TX_STOP,
> +	       &i2c->tx);
> +	/* wait for end of transation */
> +	while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI))
> +		;
> +	/* was there no acknowledge? */
> +	return (stat & LPC32XX_I2C_STAT_NAI) ? -1 : 0;
> +}
> +
> +/*
> + * I2C read called by cmd_i2c when doing 'i2c read' and by cmd_eeprom.c
> + * Begin write, send address byte(s), begin read, receive data bytes, end.
> + */
> +static int lpc32xx_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr,
> +			 int alen, u8 *data, int length)
> +{
> +	struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr];
> +	int stat, wlen;
> +
> +	/* Soft-reset the controller */
> +	writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl);
> +	while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET)
> +		;
> +	/* do we need to write an address at all? */
> +	if (alen) {
> +		/* Address slave in write mode */
> +		writel((dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx);
> +		/* write address bytes */
> +		while (alen--) {
> +			/* compute address byte + stop for the last one */
> +			int a = (addr >> (8 * alen)) & 0xff;
> +			if (!alen)
> +				a |= LPC32XX_I2C_TX_STOP;
> +			/* Send address byte */
> +			writel(a, &i2c->tx);
> +		}
> +		/* wait for end of transation */
> +		while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI))
> +			;
> +		/* clear end-of-transaction flag */
> +		writel(1, &i2c->stat);
> +	}
> +	/* do we have to read data at all? */
> +	if (length) {
> +		/* Address slave in read mode */
> +		writel(1 | (dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx);
> +		wlen = length;
> +		/* get data */
> +		while (length | wlen) {
> +			/* read status for TFF and RFE */
> +			stat = readl(&i2c->stat);
> +			/* must we, can we write a trigger byte? */
> +			if ((wlen > 0)
> +			   & (!(stat & LPC32XX_I2C_STAT_TFF))) {
> +				wlen--;
> +				/* write trigger byte + stop if last */
> +				writel(wlen ? 0 :
> +				LPC32XX_I2C_TX_STOP, &i2c->tx);
> +			}
> +			/* must we, can we read a data byte? */
> +			if ((length > 0)
> +			   & (!(stat & LPC32XX_I2C_STAT_RFE))) {
> +				length--;
> +				/* read byte */
> +				*(data++) = readl(&i2c->rx);
> +			}
> +		}
> +	}
> +	/* wait for end of transation */
> +	while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI))
> +		;
> +	/* clear end-of-transaction flag */
> +	writel(1, &i2c->stat);
> +	/* success */
> +	return 0;
> +}
> +
> +/*
> + * I2C write called by cmd_i2c when doing 'i2c write' and by cmd_eeprom.c
> + * Begin write, send address byte(s), send data bytes, end.
> + */
> +static int lpc32xx_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr,
> +			  int alen, u8 *data, int length)
> +{
> +	struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr];
> +	int stat;
> +
> +	/* Soft-reset the controller */
> +	writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl);
> +	while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET)
> +		;
> +	/* do we need to write anything at all? */
> +	if (alen | length)
> +		/* Address slave in write mode */
> +		writel((dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx);
> +	/* write address bytes */
> +	while (alen) {
> +		/* wait for transmit fifo not full */
> +		stat = readl(&i2c->stat);
> +		if (!(stat & LPC32XX_I2C_STAT_TFF)) {
> +			alen--;
> +			int a = (addr >> (8 * alen)) & 0xff;
> +			if (!(alen | length))
> +				a |= LPC32XX_I2C_TX_STOP;
> +			/* Send address byte */
> +			writel(a, &i2c->tx);
> +		}
> +	}
> +	while (length) {
> +		/* wait for transmit fifo not full */
> +		stat = readl(&i2c->stat);
> +		if (!(stat & LPC32XX_I2C_STAT_TFF)) {
> +			/* compute data byte, add stop if length==0 */
> +			length--;
> +			int d = *(data++);
> +			if (!length)
> +				d |= LPC32XX_I2C_TX_STOP;
> +			/* Send data byte */
> +			writel(d, &i2c->tx);
> +		}
> +	}
> +	/* wait for end of transation */
> +	while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI))
> +		;
> +	/* clear end-of-transaction flag */
> +	writel(1, &i2c->stat);
> +	return 0;
> +}
> +
> +U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_0, _i2c_init, lpc32xx_i2c_probe,
> +			 lpc32xx_i2c_read, lpc32xx_i2c_write,
> +			 lpc32xx_i2c_set_bus_speed,
> +			 CONFIG_SYS_I2C_LPC32XX_SPEED,
> +			 CONFIG_SYS_I2C_LPC32XX_SLAVE,
> +			 0)
> +
> +U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_1, _i2c_init, lpc32xx_i2c_probe,
> +			 lpc32xx_i2c_read, lpc32xx_i2c_write,
> +			 lpc32xx_i2c_set_bus_speed,
> +			 CONFIG_SYS_I2C_LPC32XX_SPEED,
> +			 CONFIG_SYS_I2C_LPC32XX_SLAVE,
> +			 1)
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


More information about the U-Boot mailing list