[U-Boot] [PATCH v3 02/19] ARM: prepare for moving SoC sources into mach-*

[Masahiro Yamada]

In U-boot, the directory structure, arch/$(ARCH)/cpu/$(CPU)/$(SOC)/
has been adopted except that $(CPU) is missing from some
architectures and $(SOC) is missing from some CPUs.

This structure did not fit very well in some cases.

[1] AT91

AT91 SoC family have been developed across some ARM processor
generations.  Generally speaking, some IPs are often re-used in the
same SoC family (same SoC vendor) even when the main processor is
updated.  As a result, a SoC-common directory is needed in the upper
level.  Currently, AT91 source files are placed as follows:

  arch/arm/cpu/arm920t/at91/*
  arch/arm/cpu/arm926ejs/at91/*
  arch/arm/cpu/armv7/at91/*
  arch/arm/cpu/at91-common/*

Once directories are split, the motivation for refactorings across
CPU directories is lost.  Some files in arm920t/at91/ and
arm926ejs/at91/ are so similar that they could be merged.

[2] Tegra

Tegra is a little bit special case where different CPUs are used for
SPL and the main U-boot.  To obey the arch/$(ARCH)/cpu/$(CPU)/$(SOC)
structure, the source files must be placed across the CPUs,
again SoC-common directory is necessary in the upper level.

Moreover, there are several families in Tegra: Tegra20, Tegra30,
Tegra114, Tegra124.  Here again, the tegra-common directory is needed
to contain commonly-used files.

Tegra directories have been sprinkled in the directory structure.

  arch/arm/cpu/arm720t/tegra20
  arch/arm/cpu/arm720t/tegra30
  arch/arm/cpu/arm720t/tegra114
  arch/arm/cpu/arm720t/tegra124
  arch/arm/cpu/arm720t/tegra-common
  arch/arm/cpu/armv7/tegra20
  arch/arm/cpu/armv7/tegra30
  arch/arm/cpu/armv7/tegra114
  arch/arm/cpu/armv7/tegra124
  arch/arm/cpu/armv7/tegra-common
  arch/arm/cpu/tegra20-common
  arch/arm/cpu/tegra30-common
  arch/arm/cpu/tegra114-common
  arch/arm/cpu/tegra124-common
  arch/arm/cpu/tegra-common

As you see, splitting SoC code by the CPU is not going well,
especially for ARM.
Why don't we collect SoC-specific files into a single place?

A good example we can follow is Linux's arch/arm/mach-* structure.

This item was discussed in the following thread:
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/188548/

Looks like I got some positive responses and we are almost ready to
start this movement.

This commit prepares arch/arm/Makefile for describing machdirs in it.

After this commit, we can move SoC directory to arch/arm/mach-$(SOC)
in simple steps although some cases such as AT91 and Tegra need more
fixes.

What we generally have to do is:

[1] Move files arch/arm/cpu/$(CPU)/$(SOC)/* to arch/arm/mach-$(SOC)/*
[2] Add machine entry into arch/arm/Makefile
[3] Remove "obj-y += $(SOC)" from arch/arm/cpu/$(CPU)/Makefile
[4] Fix the Kconfig file path in arch/arm/Kconfig
[5] Modify MAINTAINERS if necessary

Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
---

Changes in v3: None

 arch/arm/Makefile | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index ebb7dc3..5da2c23 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -2,6 +2,13 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
+# Machine directory name.  This list is sorted alphanumerically
+# by CONFIG_* macro name.
+
+machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
+
+libs-y += $(machdirs)
+
 head-y := arch/arm/cpu/$(CPU)/start.o
 
 ifeq ($(CONFIG_SPL_BUILD),y)
@@ -27,3 +34,6 @@ endif
 ifneq (,$(filter $(SOC), armada-xp kirkwood))
 libs-y += arch/arm/mvebu-common/
 endif
+
+# deprecated
+-include $(machdirs)/config.mk
-- 
1.9.1