[U-Boot] [PATCH] sunxi: Make CONFIG_DRAM_TPR3 apply to sun[57]i

[Adam Sampson]

The tpr3 (timing skew) parameter is used in all supported versions of
the sunxi DRAM controller, but it was only enabled for sun4i in
47e3501a76894f4ba08bc61f33774bd5d39ff464.

Signed-off-by: Adam Sampson <ats at offog.org>
---
 board/sunxi/dram_sun5i_auto.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/sunxi/dram_sun5i_auto.c b/board/sunxi/dram_sun5i_auto.c
index e52d54c..660b18e 100644
--- a/board/sunxi/dram_sun5i_auto.c
+++ b/board/sunxi/dram_sun5i_auto.c
@@ -24,7 +24,7 @@ static struct dram_para dram_para = {
 #	include "dram_timings_sun4i.h"
 	.active_windowing = 1,
 #endif
-	.tpr3 = 0,
+	.tpr3 = CONFIG_DRAM_TPR3,
 	.tpr4 = 0,
 	.tpr5 = 0,
 	.emr1 = CONFIG_DRAM_EMR1,
-- 
1.7.10.4