[U-Boot] [linux-sunxi] [PATCH] sunxi: Make CONFIG_DRAM_TPR3 apply to sun[57]i

[Siarhei Siamashka]

On Mon, 23 Feb 2015 20:44:10 +0000
Adam Sampson <ats at offog.org> wrote:

> The tpr3 (timing skew) parameter is used in all supported versions of
> the sunxi DRAM controller, but it was only enabled for sun4i in
> 47e3501a76894f4ba08bc61f33774bd5d39ff464.
> 
> Signed-off-by: Adam Sampson <ats at offog.org>
> ---
>  board/sunxi/dram_sun5i_auto.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/board/sunxi/dram_sun5i_auto.c b/board/sunxi/dram_sun5i_auto.c
> index e52d54c..660b18e 100644
> --- a/board/sunxi/dram_sun5i_auto.c
> +++ b/board/sunxi/dram_sun5i_auto.c
> @@ -24,7 +24,7 @@ static struct dram_para dram_para = {
>  #	include "dram_timings_sun4i.h"
>  	.active_windowing = 1,
>  #endif
> -	.tpr3 = 0,
> +	.tpr3 = CONFIG_DRAM_TPR3,
>  	.tpr4 = 0,
>  	.tpr5 = 0,
>  	.emr1 = CONFIG_DRAM_EMR1,

Oops. Thanks for spotting this.

Acked-by: Siarhei Siamashka <siarhei.siamashka at gmail.com>

-- 
Best regards,
Siarhei Siamashka