[U-Boot] [PATCH] keystone2: ddr3: eliminate using global ddr3_size variable
Nishanth Menon
nm at ti.com
Sun Feb 15 19:05:44 CET 2015
On 14:07-20150211, Vitaly Andrianov wrote:
> KS2 ddr3 initialization uses ddr3_size global variable before u-boot
> relocation. Even if the variable is not being used after relocation,
> writing to it corrupts relocation table.
>
> This patch removes the global ddr3_size variable and uses local one
> instead.
>
> Signed-off-by: Vitaly Andrianov <vitalya at ti.com>
> ---
This patch is necesasry for Keystone2 platforms to boot to u-boot shell.
Tested-by: Nishanth Menon <nm at ti.com>
Tested on v2015.01 tag (which is broke).
> arch/arm/cpu/armv7/keystone/ddr3.c | 5 +----
> arch/arm/include/asm/arch-keystone/ddr3.h | 5 ++---
> board/ti/ks2_evm/board.c | 6 ++++--
> board/ti/ks2_evm/ddr3_k2e.c | 14 ++++++--------
> board/ti/ks2_evm/ddr3_k2hk.c | 11 ++---------
> board/ti/ks2_evm/ddr3_k2l.c | 12 ++----------
> 6 files changed, 17 insertions(+), 36 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/cpu/armv7/keystone/ddr3.c
> index 923906a..dfb27b5 100644
> --- a/arch/arm/cpu/armv7/keystone/ddr3.c
> +++ b/arch/arm/cpu/armv7/keystone/ddr3.c
> @@ -263,17 +263,14 @@ static void ddr3_map_ecc_cic2_irq(u32 base)
> }
> #endif
>
> -void ddr3_init_ecc(u32 base)
> +void ddr3_init_ecc(u32 base, u32 ddr3_size)
> {
> - u32 ddr3_size;
> -
> if (!ddr3_ecc_support_rmw(base)) {
> ddr3_disable_ecc(base);
> return;
> }
>
> ddr3_ecc_init_range(base);
> - ddr3_size = ddr3_get_size();
> ddr3_reset_data(CONFIG_SYS_SDRAM_BASE, ddr3_size);
>
> /* mapping DDR3 ECC system interrupt from CIC2 to GIC */
> diff --git a/arch/arm/include/asm/arch-keystone/ddr3.h b/arch/arm/include/asm/arch-keystone/ddr3.h
> index b044d6f..a22c237 100644
> --- a/arch/arm/include/asm/arch-keystone/ddr3.h
> +++ b/arch/arm/include/asm/arch-keystone/ddr3.h
> @@ -48,10 +48,9 @@ struct ddr3_emif_config {
> unsigned int sdrfc;
> };
>
> -void ddr3_init(void);
> -int ddr3_get_size(void);
> +u32 ddr3_init(void);
> void ddr3_reset_ddrphy(void);
> -void ddr3_init_ecc(u32 base);
> +void ddr3_init_ecc(u32 base, u32 ddr3_size);
> void ddr3_disable_ecc(u32 base);
> void ddr3_check_ecc_int(u32 base);
> int ddr3_ecc_support_rmw(u32 base);
> diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c
> index 04ec675..8892a28 100644
> --- a/board/ti/ks2_evm/board.c
> +++ b/board/ti/ks2_evm/board.c
> @@ -35,12 +35,14 @@ static struct aemif_config aemif_configs[] = {
>
> int dram_init(void)
> {
> - ddr3_init();
> + u32 ddr3_size;
> +
> + ddr3_size = ddr3_init();
>
> gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
> CONFIG_MAX_RAM_BANK_SIZE);
> aemif_init(ARRAY_SIZE(aemif_configs), aemif_configs);
> - ddr3_init_ecc(KS2_DDR3A_EMIF_CTRL_BASE);
> + ddr3_init_ecc(KS2_DDR3A_EMIF_CTRL_BASE, ddr3_size);
> return 0;
> }
>
> diff --git a/board/ti/ks2_evm/ddr3_k2e.c b/board/ti/ks2_evm/ddr3_k2e.c
> index 40fd966..35ffb42 100644
> --- a/board/ti/ks2_evm/ddr3_k2e.c
> +++ b/board/ti/ks2_evm/ddr3_k2e.c
> @@ -11,11 +11,11 @@
> #include "ddr3_cfg.h"
> #include <asm/arch/ddr3.h>
>
> -static int ddr3_size;
> static struct pll_init_data ddr3_400 = DDR3_PLL_400;
>
> -void ddr3_init(void)
> +u32 ddr3_init(void)
> {
> + u32 ddr3_size;
> char dimm_name[32];
>
> if (~(readl(KS2_PLL_CNTRL_BASE + KS2_RSTCTRL_RSTYPE) & 0x1))
> @@ -43,13 +43,11 @@ void ddr3_init(void)
> printf("DRAM: 4 GiB\n");
> ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_4g);
> ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_4g);
> + } else {
> + printf("Unknown SO-DIMM. Cannot configure DDR3\n");
> + while (1)
> + ;
> }
> -}
>
> -/**
> - * ddr3_get_size - return ddr3 size in GiB
> - */
> -int ddr3_get_size(void)
> -{
> return ddr3_size;
> }
> diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c
> index a1c3d05..b36eb27 100644
> --- a/board/ti/ks2_evm/ddr3_k2hk.c
> +++ b/board/ti/ks2_evm/ddr3_k2hk.c
> @@ -12,14 +12,13 @@
> #include <asm/arch/ddr3.h>
> #include <asm/arch/hardware.h>
>
> -static int ddr3_size;
> -
> struct pll_init_data ddr3a_333 = DDR3_PLL_333(A);
> struct pll_init_data ddr3a_400 = DDR3_PLL_400(A);
>
> -void ddr3_init(void)
> +u32 ddr3_init(void)
> {
> char dimm_name[32];
> + u32 ddr3_size;
>
> ddr3_get_dimm_params(dimm_name);
>
> @@ -93,12 +92,6 @@ void ddr3_init(void)
> /* Apply the workaround for PG 1.0 and 1.1 Silicons */
> if (cpu_revision() <= 1)
> ddr3_err_reset_workaround();
> -}
>
> -/**
> - * ddr3_get_size - return ddr3 size in GiB
> - */
> -int ddr3_get_size(void)
> -{
> return ddr3_size;
> }
> diff --git a/board/ti/ks2_evm/ddr3_k2l.c b/board/ti/ks2_evm/ddr3_k2l.c
> index 15a14f2..00fc194 100644
> --- a/board/ti/ks2_evm/ddr3_k2l.c
> +++ b/board/ti/ks2_evm/ddr3_k2l.c
> @@ -11,28 +11,20 @@
> #include "ddr3_cfg.h"
> #include <asm/arch/ddr3.h>
>
> -static int ddr3_size;
> static struct pll_init_data ddr3_400 = DDR3_PLL_400;
>
> -void ddr3_init(void)
> +u32 ddr3_init(void)
> {
> init_pll(&ddr3_400);
>
> /* No SO-DIMM, 2GB discreet DDR */
> printf("DRAM: 2 GiB\n");
> - ddr3_size = 2;
>
> /* Reset DDR3 PHY after PLL enabled */
> ddr3_reset_ddrphy();
>
> ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_2g);
> ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_2g);
> -}
>
> -/**
> - * ddr3_get_size - return ddr3 size in GiB
> - */
> -int ddr3_get_size(void)
> -{
> - return ddr3_size;
> + return 2;
> }
> --
> 1.9.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
Regards,
Nishanth Menon
More information about the U-Boot
mailing list