[U-Boot] [PATCH 2/3] ARM: imx6: disable bandgap self-bias after boot

[Stefano Babic]

Hi Peng,

On 15/01/2015 07:22, Peng Fan wrote:
> The self-bias circuit is used by the bandgap during startup.
> Once the bandgap has stabilized, the self-bias circuit should
> be disabled for best noise performance of analog blocks.
> Also this bit should be disabled before the chip enters STOP mode or
> when ever the regular bandgap is disabled.
> 
> Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
> Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan at freescale.com>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================