[U-Boot] [PATCH 08/16] cros_ec: Drop unused CONFIG_DM_CROS_EC

Simon Glass sjg at chromium.org
Tue Feb 24 14:24:03 CET 2015


Since all supported boards enable this option now, we can remove it along
with the old code.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 README                            |   8 --
 arch/sandbox/Kconfig              |   3 -
 board/samsung/smdk5420/Kconfig    |   6 -
 common/cros_ec.c                  |  30 +----
 configs/chromebook_link_defconfig |   1 -
 drivers/misc/Kconfig              |   9 --
 drivers/misc/cros_ec.c            | 240 --------------------------------------
 drivers/misc/cros_ec_sandbox.c    |  73 ------------
 include/configs/snow.h            |   1 -
 include/cros_ec.h                 | 130 ---------------------
 10 files changed, 1 insertion(+), 500 deletions(-)

diff --git a/README b/README
index ba57dc5..ca4b2b3 100644
--- a/README
+++ b/README
@@ -708,14 +708,6 @@ The following options need to be configured:
 		enabled together (it is not possible to use driver model
 		for one and not the other).
 
-		CONFIG_DM_CROS_EC
-
-		Enable driver model for the Chrome OS EC interface. This
-		allows the cros_ec SPI driver to operate with CONFIG_DM_SPI
-		but otherwise makes few changes. Since cros_ec also supports
-		I2C and LPC (which don't support driver model yet), a full
-		conversion is not yet possible.
-
 
 		** Code size options: The following options are enabled by
 		default except in SPL. Enable them explicitly to get these
diff --git a/arch/sandbox/Kconfig b/arch/sandbox/Kconfig
index 477a20a..7ea6de7 100644
--- a/arch/sandbox/Kconfig
+++ b/arch/sandbox/Kconfig
@@ -19,9 +19,6 @@ config DM_GPIO
 config DM_SERIAL
 	default y
 
-config DM_CROS_EC
-	default y
-
 config DM_SPI
 	default y
 
diff --git a/board/samsung/smdk5420/Kconfig b/board/samsung/smdk5420/Kconfig
index 576abae..a9d62ff 100644
--- a/board/samsung/smdk5420/Kconfig
+++ b/board/samsung/smdk5420/Kconfig
@@ -22,9 +22,6 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "peach-pi"
 
-config DM_CROS_EC
-	default y
-
 endif
 
 if TARGET_PEACH_PIT
@@ -38,9 +35,6 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "peach-pit"
 
-config DM_CROS_EC
-	default y
-
 endif
 
 if TARGET_SMDK5420
diff --git a/common/cros_ec.c b/common/cros_ec.c
index 64b4679..f9c74ca 100644
--- a/common/cros_ec.c
+++ b/common/cros_ec.c
@@ -15,18 +15,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef CONFIG_DM_CROS_EC
-struct local_info {
-	struct cros_ec_dev *cros_ec_dev;	/* Pointer to cros_ec device */
-	int cros_ec_err;			/* Error for cros_ec, 0 if ok */
-};
-
-static struct local_info local;
-#endif
-
 struct cros_ec_dev *board_get_cros_ec_dev(void)
 {
-#ifdef CONFIG_DM_CROS_EC
 	struct udevice *dev;
 	int ret;
 
@@ -36,30 +26,15 @@ struct cros_ec_dev *board_get_cros_ec_dev(void)
 		return NULL;
 	}
 	return dev_get_uclass_priv(dev);
-#else
-	return local.cros_ec_dev;
-#endif
-}
-
-static int board_init_cros_ec_devices(const void *blob)
-{
-#ifndef CONFIG_DM_CROS_EC
-	local.cros_ec_err = cros_ec_init(blob, &local.cros_ec_dev);
-	if (local.cros_ec_err)
-		return -1;  /* Will report in board_late_init() */
-#endif
-
-	return 0;
 }
 
 int cros_ec_board_init(void)
 {
-	return board_init_cros_ec_devices(gd->fdt_blob);
+	return 0;
 }
 
 int cros_ec_get_error(void)
 {
-#ifdef CONFIG_DM_CROS_EC
 	struct udevice *dev;
 	int ret;
 
@@ -68,7 +43,4 @@ int cros_ec_get_error(void)
 		return ret;
 
 	return 0;
-#else
-	return local.cros_ec_err;
-#endif
 }
diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig
index 0ffdaee..f3196fd 100644
--- a/configs/chromebook_link_defconfig
+++ b/configs/chromebook_link_defconfig
@@ -10,4 +10,3 @@ CONFIG_VIDEO_VESA=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
 CONFIG_DM_PCI=y
-CONFIG_DM_CROS_EC=y
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 813d1c2..e69de29 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -1,9 +0,0 @@
-config DM_CROS_EC
-	bool "Enable Driver Model for Chrome OS EC"
-	depends on DM
-	help
-	  Enable driver model for the Chrome OS EC interface. This
-	  allows the cros_ec SPI driver to operate with CONFIG_DM_SPI
-	  but otherwise makes few changes. Since cros_ec also supports
-	  I2C and LPC (which don't support driver model yet), a full
-	  conversion is not yet possible.
diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c
index 6d4d045..982bac7 100644
--- a/drivers/misc/cros_ec.c
+++ b/drivers/misc/cros_ec.c
@@ -41,10 +41,6 @@ enum {
 	CROS_EC_CMD_HASH_TIMEOUT_MS = 2000,
 };
 
-#ifndef CONFIG_DM_CROS_EC
-static struct cros_ec_dev static_dev, *last_dev;
-#endif
-
 DECLARE_GLOBAL_DATA_PTR;
 
 /* Note: depends on enum ec_current_image */
@@ -211,9 +207,7 @@ static int send_command_proto3(struct cros_ec_dev *dev,
 			       const void *dout, int dout_len,
 			       uint8_t **dinp, int din_len)
 {
-#ifdef CONFIG_DM_CROS_EC
 	struct dm_cros_ec_ops *ops;
-#endif
 	int out_bytes, in_bytes;
 	int rv;
 
@@ -228,28 +222,8 @@ static int send_command_proto3(struct cros_ec_dev *dev,
 	if (in_bytes < 0)
 		return in_bytes;
 
-#ifdef CONFIG_DM_CROS_EC
 	ops = dm_cros_ec_get_ops(dev->dev);
 	rv = ops->packet ? ops->packet(dev->dev, out_bytes, in_bytes) : -ENOSYS;
-#else
-	switch (dev->interface) {
-#ifdef CONFIG_CROS_EC_SPI
-	case CROS_EC_IF_SPI:
-		rv = cros_ec_spi_packet(dev, out_bytes, in_bytes);
-		break;
-#endif
-#ifdef CONFIG_CROS_EC_SANDBOX
-	case CROS_EC_IF_SANDBOX:
-		rv = cros_ec_sandbox_packet(dev, out_bytes, in_bytes);
-		break;
-#endif
-	case CROS_EC_IF_NONE:
-	/* TODO: support protocol 3 for LPC, I2C; for now fall through */
-	default:
-		debug("%s: Unsupported interface\n", __func__);
-		rv = -1;
-	}
-#endif
 	if (rv < 0)
 		return rv;
 
@@ -261,9 +235,7 @@ static int send_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
 			const void *dout, int dout_len,
 			uint8_t **dinp, int din_len)
 {
-#ifdef CONFIG_DM_CROS_EC
 	struct dm_cros_ec_ops *ops;
-#endif
 	int ret = -1;
 
 	/* Handle protocol version 3 support */
@@ -272,38 +244,9 @@ static int send_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
 					   dout, dout_len, dinp, din_len);
 	}
 
-#ifdef CONFIG_DM_CROS_EC
 	ops = dm_cros_ec_get_ops(dev->dev);
 	ret = ops->command(dev->dev, cmd, cmd_version,
 			   (const uint8_t *)dout, dout_len, dinp, din_len);
-#else
-	switch (dev->interface) {
-#ifdef CONFIG_CROS_EC_SPI
-	case CROS_EC_IF_SPI:
-		ret = cros_ec_spi_command(dev, cmd, cmd_version,
-					(const uint8_t *)dout, dout_len,
-					dinp, din_len);
-		break;
-#endif
-#ifdef CONFIG_CROS_EC_I2C
-	case CROS_EC_IF_I2C:
-		ret = cros_ec_i2c_command(dev, cmd, cmd_version,
-					(const uint8_t *)dout, dout_len,
-					dinp, din_len);
-		break;
-#endif
-#ifdef CONFIG_CROS_EC_LPC
-	case CROS_EC_IF_LPC:
-		ret = cros_ec_lpc_command(dev, cmd, cmd_version,
-					(const uint8_t *)dout, dout_len,
-					dinp, din_len);
-		break;
-#endif
-	case CROS_EC_IF_NONE:
-	default:
-		ret = -1;
-	}
-#endif
 
 	return ret;
 }
@@ -681,7 +624,6 @@ static int cros_ec_check_version(struct cros_ec_dev *dev)
 	struct ec_params_hello req;
 	struct ec_response_hello *resp;
 
-#ifdef CONFIG_DM_CROS_EC
 	struct dm_cros_ec_ops *ops;
 	int ret;
 
@@ -691,13 +633,6 @@ static int cros_ec_check_version(struct cros_ec_dev *dev)
 		if (ret)
 			return ret;
 	}
-#else
-#ifdef CONFIG_CROS_EC_LPC
-	/* LPC has its own way of doing this */
-	if (dev->interface == CROS_EC_IF_LPC)
-		return cros_ec_lpc_check_version(dev);
-#endif
-#endif
 
 	/*
 	 * TODO(sjg at chromium.org).
@@ -1027,76 +962,6 @@ int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state)
 	return 0;
 }
 
-#ifndef CONFIG_DM_CROS_EC
-/**
- * Decode EC interface details from the device tree and allocate a suitable
- * device.
- *
- * @param blob		Device tree blob
- * @param node		Node to decode from
- * @param devp		Returns a pointer to the new allocated device
- * @return 0 if ok, -1 on error
- */
-static int cros_ec_decode_fdt(const void *blob, int node,
-		struct cros_ec_dev **devp)
-{
-	enum fdt_compat_id compat;
-	struct cros_ec_dev *dev;
-	int parent;
-
-	/* See what type of parent we are inside (this is expensive) */
-	parent = fdt_parent_offset(blob, node);
-	if (parent < 0) {
-		debug("%s: Cannot find node parent\n", __func__);
-		return -1;
-	}
-
-	dev = &static_dev;
-	dev->node = node;
-	dev->parent_node = parent;
-
-	compat = fdtdec_lookup(blob, parent);
-	switch (compat) {
-#ifdef CONFIG_CROS_EC_SPI
-	case COMPAT_SAMSUNG_EXYNOS_SPI:
-		dev->interface = CROS_EC_IF_SPI;
-		if (cros_ec_spi_decode_fdt(dev, blob))
-			return -1;
-		break;
-#endif
-#ifdef CONFIG_CROS_EC_I2C
-	case COMPAT_SAMSUNG_S3C2440_I2C:
-		dev->interface = CROS_EC_IF_I2C;
-		if (cros_ec_i2c_decode_fdt(dev, blob))
-			return -1;
-		break;
-#endif
-#ifdef CONFIG_CROS_EC_LPC
-	case COMPAT_INTEL_LPC:
-		dev->interface = CROS_EC_IF_LPC;
-		break;
-#endif
-#ifdef CONFIG_CROS_EC_SANDBOX
-	case COMPAT_SANDBOX_HOST_EMULATION:
-		dev->interface = CROS_EC_IF_SANDBOX;
-		break;
-#endif
-	default:
-		debug("%s: Unknown compat id %d\n", __func__, compat);
-		return -1;
-	}
-
-	gpio_request_by_name_nodev(blob, node, "ec-interrupt", 0, &dev->ec_int,
-				   GPIOD_IS_IN);
-	dev->optimise_flash_write = fdtdec_get_bool(blob, node,
-						    "optimise-flash-write");
-	*devp = dev;
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_DM_CROS_EC
 int cros_ec_register(struct udevice *dev)
 {
 	struct cros_ec_dev *cdev = dev_get_uclass_priv(dev);
@@ -1125,94 +990,6 @@ int cros_ec_register(struct udevice *dev)
 
 	return 0;
 }
-#else
-int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp)
-{
-	struct cros_ec_dev *dev;
-	char id[MSG_BYTES];
-#ifdef CONFIG_DM_CROS_EC
-	struct udevice *udev;
-	int ret;
-
-	ret = uclass_find_device(UCLASS_CROS_EC, 0, &udev);
-	if (!ret)
-		device_remove(udev);
-	ret = uclass_get_device(UCLASS_CROS_EC, 0, &udev);
-	if (ret)
-		return ret;
-	dev = dev_get_uclass_priv(udev);
-	return 0;
-#else
-	int node = 0;
-
-	*cros_ecp = NULL;
-	do {
-		node = fdtdec_next_compatible(blob, node,
-					      COMPAT_GOOGLE_CROS_EC);
-		if (node < 0) {
-			debug("%s: Node not found\n", __func__);
-			return 0;
-		}
-	} while (!fdtdec_get_is_enabled(blob, node));
-
-	if (cros_ec_decode_fdt(blob, node, &dev)) {
-		debug("%s: Failed to decode device.\n", __func__);
-		return -CROS_EC_ERR_FDT_DECODE;
-	}
-
-	switch (dev->interface) {
-#ifdef CONFIG_CROS_EC_SPI
-	case CROS_EC_IF_SPI:
-		if (cros_ec_spi_init(dev, blob)) {
-			debug("%s: Could not setup SPI interface\n", __func__);
-			return -CROS_EC_ERR_DEV_INIT;
-		}
-		break;
-#endif
-#ifdef CONFIG_CROS_EC_I2C
-	case CROS_EC_IF_I2C:
-		if (cros_ec_i2c_init(dev, blob))
-			return -CROS_EC_ERR_DEV_INIT;
-		break;
-#endif
-#ifdef CONFIG_CROS_EC_LPC
-	case CROS_EC_IF_LPC:
-		if (cros_ec_lpc_init(dev, blob))
-			return -CROS_EC_ERR_DEV_INIT;
-		break;
-#endif
-#ifdef CONFIG_CROS_EC_SANDBOX
-	case CROS_EC_IF_SANDBOX:
-		if (cros_ec_sandbox_init(dev, blob))
-			return -CROS_EC_ERR_DEV_INIT;
-		break;
-#endif
-	case CROS_EC_IF_NONE:
-	default:
-		return 0;
-	}
-#endif
-
-	if (cros_ec_check_version(dev)) {
-		debug("%s: Could not detect CROS-EC version\n", __func__);
-		return -CROS_EC_ERR_CHECK_VERSION;
-	}
-
-	if (cros_ec_read_id(dev, id, sizeof(id))) {
-		debug("%s: Could not read KBC ID\n", __func__);
-		return -CROS_EC_ERR_READ_ID;
-	}
-
-	/* Remember this device for use by the cros_ec command */
-	*cros_ecp = dev;
-#ifndef CONFIG_DM_CROS_EC
-	last_dev = dev;
-#endif
-	debug("Google Chrome EC CROS-EC driver ready, id '%s'\n", id);
-
-	return 0;
-}
-#endif
 
 int cros_ec_decode_region(int argc, char * const argv[])
 {
@@ -1595,9 +1372,7 @@ static int cros_ec_i2c_passthrough(struct cros_ec_dev *dev, int flag,
 static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	struct cros_ec_dev *dev;
-#ifdef CONFIG_DM_CROS_EC
 	struct udevice *udev;
-#endif
 	const char *cmd;
 	int ret = 0;
 
@@ -1606,15 +1381,11 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	cmd = argv[1];
 	if (0 == strcmp("init", cmd)) {
-#ifdef CONFIG_DM_CROS_EC
 		/* Remove any existing device */
 		ret = uclass_find_device(UCLASS_CROS_EC, 0, &udev);
 		if (!ret)
 			device_remove(udev);
 		ret = uclass_get_device(UCLASS_CROS_EC, 0, &udev);
-#else
-		ret = cros_ec_init(gd->fdt_blob, &dev);
-#endif
 		if (ret) {
 			printf("Could not init cros_ec device (err %d)\n", ret);
 			return 1;
@@ -1622,21 +1393,12 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		return 0;
 	}
 
-#ifdef CONFIG_DM_CROS_EC
 	ret = uclass_get_device(UCLASS_CROS_EC, 0, &udev);
 	if (ret) {
 		printf("Cannot get cros-ec device (err=%d)\n", ret);
 		return 1;
 	}
 	dev = dev_get_uclass_priv(udev);
-#else
-	/* Just use the last allocated device; there should be only one */
-	if (!last_dev) {
-		printf("No CROS-EC device available\n");
-		return 1;
-	}
-	dev = last_dev;
-#endif
 	if (0 == strcmp("id", cmd)) {
 		char id[MSG_BYTES];
 
@@ -1894,10 +1656,8 @@ U_BOOT_CMD(
 );
 #endif
 
-#ifdef CONFIG_DM_CROS_EC
 UCLASS_DRIVER(cros_ec) = {
 	.id		= UCLASS_CROS_EC,
 	.name		= "cros_ec",
 	.per_device_auto_alloc_size = sizeof(struct cros_ec_dev),
 };
-#endif
diff --git a/drivers/misc/cros_ec_sandbox.c b/drivers/misc/cros_ec_sandbox.c
index 282d8d8..fa7d669 100644
--- a/drivers/misc/cros_ec_sandbox.c
+++ b/drivers/misc/cros_ec_sandbox.c
@@ -467,17 +467,10 @@ static int process_cmd(struct ec_state *ec,
 	return len;
 }
 
-#ifdef CONFIG_DM_CROS_EC
 int cros_ec_sandbox_packet(struct udevice *udev, int out_bytes, int in_bytes)
 {
 	struct cros_ec_dev *dev = dev_get_uclass_priv(udev);
 	struct ec_state *ec = dev_get_priv(dev->dev);
-#else
-int cros_ec_sandbox_packet(struct cros_ec_dev *dev, int out_bytes,
-			   int in_bytes)
-{
-	struct ec_state *ec = &s_state;
-#endif
 	struct ec_host_request *req_hdr = (struct ec_host_request *)dev->dout;
 	const void *req_data = req_hdr + 1;
 	struct ec_host_response *resp_hdr = (struct ec_host_response *)dev->din;
@@ -500,18 +493,9 @@ int cros_ec_sandbox_packet(struct cros_ec_dev *dev, int out_bytes,
 	return in_bytes;
 }
 
-int cros_ec_sandbox_decode_fdt(struct cros_ec_dev *dev, const void *blob)
-{
-	return 0;
-}
-
 void cros_ec_check_keyboard(struct cros_ec_dev *dev)
 {
-#ifdef CONFIG_DM_CROS_EC
 	struct ec_state *ec = dev_get_priv(dev->dev);
-#else
-	struct ec_state *ec = &s_state;
-#endif
 	ulong start;
 
 	printf("Press keys for EC to detect on reset (ESC=recovery)...");
@@ -525,7 +509,6 @@ void cros_ec_check_keyboard(struct cros_ec_dev *dev)
 	}
 }
 
-#ifdef CONFIG_DM_CROS_EC
 int cros_ec_probe(struct udevice *dev)
 {
 	struct ec_state *ec = dev->priv;
@@ -569,61 +552,6 @@ int cros_ec_probe(struct udevice *dev)
 	return cros_ec_register(dev);
 }
 
-#else
-
-/**
- * Initialize sandbox EC emulation.
- *
- * @param dev		CROS_EC device
- * @param blob		Device tree blob
- * @return 0 if ok, -1 on error
- */
-int cros_ec_sandbox_init(struct cros_ec_dev *dev, const void *blob)
-{
-	struct ec_state *ec = &s_state;
-	int node;
-	int err;
-
-	node = fdtdec_next_compatible(blob, 0, COMPAT_GOOGLE_CROS_EC);
-	if (node < 0) {
-		debug("Failed to find chrome-ec node'\n");
-		return -1;
-	}
-
-	err = cros_ec_decode_ec_flash(blob, node, &ec->ec_config);
-	if (err)
-		return err;
-
-	node = fdtdec_next_compatible(blob, 0, COMPAT_GOOGLE_CROS_EC_KEYB);
-	if (node < 0) {
-		debug("%s: No cros_ec keyboard found\n", __func__);
-	} else if (keyscan_read_fdt_matrix(ec, blob, node)) {
-		debug("%s: Could not read key matrix\n", __func__);
-		return -1;
-	}
-
-	/* If we loaded EC data, check that the length matches */
-	if (ec->flash_data &&
-	    ec->flash_data_len != ec->ec_config.flash.length) {
-		printf("EC data length is %x, expected %x, discarding data\n",
-		       ec->flash_data_len, ec->ec_config.flash.length);
-		os_free(ec->flash_data);
-		ec->flash_data = NULL;
-	}
-
-	/* Otherwise allocate the memory */
-	if (!ec->flash_data) {
-		ec->flash_data_len = ec->ec_config.flash.length;
-		ec->flash_data = os_malloc(ec->flash_data_len);
-		if (!ec->flash_data)
-			return -ENOMEM;
-	}
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_DM_CROS_EC
 struct dm_cros_ec_ops cros_ec_ops = {
 	.packet = cros_ec_sandbox_packet,
 };
@@ -641,4 +569,3 @@ U_BOOT_DRIVER(cros_ec_sandbox) = {
 	.priv_auto_alloc_size = sizeof(struct ec_state),
 	.ops		= &cros_ec_ops,
 };
-#endif
diff --git a/include/configs/snow.h b/include/configs/snow.h
index ce6676e..7eaa586 100644
--- a/include/configs/snow.h
+++ b/include/configs/snow.h
@@ -22,7 +22,6 @@
 
 #define CONFIG_CROS_EC_I2C		/* Support CROS_EC over I2C */
 #define CONFIG_POWER_TPS65090_I2C
-#define CONFIG_DM_CROS_EC
 
 #define CONFIG_BOARD_COMMON
 #define CONFIG_ARCH_EARLY_INIT_R
diff --git a/include/cros_ec.h b/include/cros_ec.h
index 8457c80..850c09e 100644
--- a/include/cros_ec.h
+++ b/include/cros_ec.h
@@ -15,31 +15,9 @@
 #include <cros_ec_message.h>
 #include <asm/gpio.h>
 
-#ifndef CONFIG_DM_CROS_EC
-/* Which interface is the device on? */
-enum cros_ec_interface_t {
-	CROS_EC_IF_NONE,
-	CROS_EC_IF_SPI,
-	CROS_EC_IF_I2C,
-	CROS_EC_IF_LPC,	/* Intel Low Pin Count interface */
-	CROS_EC_IF_SANDBOX,
-};
-#endif
-
 /* Our configuration information */
 struct cros_ec_dev {
-#ifdef CONFIG_DM_CROS_EC
 	struct udevice *dev;		/* Transport device */
-#else
-	enum cros_ec_interface_t interface;
-	struct spi_slave *spi;		/* Our SPI slave, if using SPI */
-	int node;                       /* Our node */
-	int parent_node;		/* Our parent node (interface) */
-	unsigned int cs;		/* Our chip select */
-	unsigned int addr;		/* Device address (for I2C) */
-	unsigned int bus_num;		/* Bus number (for I2C) */
-	unsigned int max_frequency;	/* Maximum interface frequency */
-#endif
 	struct gpio_desc ec_int;	/* GPIO used as EC interrupt line */
 	int protocol_version;           /* Protocol version to use */
 	int optimise_flash_write;	/* Don't write erased flash blocks */
@@ -240,8 +218,6 @@ int cros_ec_flash_update_rw(struct cros_ec_dev *dev,
  */
 struct cros_ec_dev *board_get_cros_ec_dev(void);
 
-#ifdef CONFIG_DM_CROS_EC
-
 struct dm_cros_ec_ops {
 	int (*check_version)(struct udevice *dev);
 	int (*command)(struct udevice *dev, uint8_t cmd, int cmd_version,
@@ -255,112 +231,6 @@ struct dm_cros_ec_ops {
 
 int cros_ec_register(struct udevice *dev);
 
-#else /* !CONFIG_DM_CROS_EC */
-
-/* Internal interfaces */
-int cros_ec_i2c_init(struct cros_ec_dev *dev, const void *blob);
-int cros_ec_spi_init(struct cros_ec_dev *dev, const void *blob);
-int cros_ec_lpc_init(struct cros_ec_dev *dev, const void *blob);
-int cros_ec_sandbox_init(struct cros_ec_dev *dev, const void *blob);
-
-/**
- * Read information from the fdt for the i2c cros_ec interface
- *
- * @param dev		CROS-EC device
- * @param blob		Device tree blob
- * @return 0 if ok, -1 if we failed to read all required information
- */
-int cros_ec_i2c_decode_fdt(struct cros_ec_dev *dev, const void *blob);
-
-/**
- * Read information from the fdt for the spi cros_ec interface
- *
- * @param dev		CROS-EC device
- * @param blob		Device tree blob
- * @return 0 if ok, -1 if we failed to read all required information
- */
-int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob);
-
-/**
- * Read information from the fdt for the sandbox cros_ec interface
- *
- * @param dev		CROS-EC device
- * @param blob		Device tree blob
- * @return 0 if ok, -1 if we failed to read all required information
- */
-int cros_ec_sandbox_decode_fdt(struct cros_ec_dev *dev, const void *blob);
-
-/**
- * Check whether the LPC interface supports new-style commands.
- *
- * LPC has its own way of doing this, which involves checking LPC values
- * visible to the host. Do this, and update dev->protocol_version accordingly.
- *
- * @param dev		CROS-EC device to check
- */
-int cros_ec_lpc_check_version(struct cros_ec_dev *dev);
-
-/**
- * Send a command to an I2C CROS-EC device and return the reply.
- *
- * This rather complicated function deals with sending both old-style and
- * new-style commands. The old ones have just a command byte and arguments.
- * The new ones have version, command, arg-len, [args], chksum so are 3 bytes
- * longer.
- *
- * The device's internal input/output buffers are used.
- *
- * @param dev		CROS-EC device
- * @param cmd		Command to send (EC_CMD_...)
- * @param cmd_version	Version of command to send (EC_VER_...)
- * @param dout          Output data (may be NULL If dout_len=0)
- * @param dout_len      Size of output data in bytes
- * @param dinp          Returns pointer to response data
- * @param din_len       Maximum size of response in bytes
- * @return number of bytes in response, or -1 on error
- */
-int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
-		     const uint8_t *dout, int dout_len,
-		     uint8_t **dinp, int din_len);
-
-/**
- * Send a command to a LPC CROS-EC device and return the reply.
- *
- * The device's internal input/output buffers are used.
- *
- * @param dev		CROS-EC device
- * @param cmd		Command to send (EC_CMD_...)
- * @param cmd_version	Version of command to send (EC_VER_...)
- * @param dout          Output data (may be NULL If dout_len=0)
- * @param dout_len      Size of output data in bytes
- * @param dinp          Returns pointer to response data
- * @param din_len       Maximum size of response in bytes
- * @return number of bytes in response, or -1 on error
- */
-int cros_ec_lpc_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
-		     const uint8_t *dout, int dout_len,
-		     uint8_t **dinp, int din_len);
-
-int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
-		     const uint8_t *dout, int dout_len,
-		     uint8_t **dinp, int din_len);
-
-/**
- * Send a packet to a CROS-EC device and return the response packet.
- *
- * Expects the request packet to be stored in dev->dout.  Stores the response
- * packet in dev->din.
- *
- * @param dev		CROS-EC device
- * @param out_bytes	Size of request packet to output
- * @param in_bytes	Maximum size of response packet to receive
- * @return number of bytes in response packet, or <0 on error
- */
-int cros_ec_spi_packet(struct cros_ec_dev *dev, int out_bytes, int in_bytes);
-int cros_ec_sandbox_packet(struct cros_ec_dev *dev, int out_bytes,
-			   int in_bytes);
-#endif
-
 /**
  * Dump a block of data for a command.
  *
-- 
2.2.0.rc0.207.ga3a616c



More information about the U-Boot mailing list