[U-Boot] [PATCH v2 12/24] board/BuR/common: Introduce Network Console and common environment for it

[Hannes Petermaier]

It is often necessary to "break in" into boards bootloader commandline if
something fails or even for development purposes some parameters have to be
changed.

So we enable u-boot's CONFIG_NETCONSOLE feature.
We also modify Networksettings to apply with this new use-case.

Signed-off-by: Hannes Petermaier <oe5hpm at oevsv.at>

---
Changes for V2: None
---
 include/configs/bur_am335x_common.h |   23 +++++++++++++++++++++--
 include/configs/tseries.h           |   33 ++++-----------------------------
 2 files changed, 25 insertions(+), 31 deletions(-)

diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index e9d5d01..d7ea1c9 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -12,6 +12,23 @@
 #ifndef __BUR_AM335X_COMMON_H__
 #define __BUR_AM335X_COMMON_H__
 /* ------------------------------------------------------------------------- */
+#define BUR_COMMON_ENV \
+"defaultip=192.168.60.253\0" \
+"defaultsip=192.168.60.254\0" \
+"netconsole=echo switching to network console ...; " \
+"if dhcp; then " \
+"setenv ncip ${serverip}; else " \
+"setenv ncip 192.168.60.254; " \
+"setenv serverip 192.168.60.254; " \
+"setenv gatewayip 192.168.60.254; " \
+"setenv ipaddr 192.168.60.1; " \
+"fi;" \
+"setenv netdisplay0 '" \
+"setcurs 1 9; puts myip; setcurs 10 9; puts ${ipaddr};" \
+"setcurs 1 10;puts serverip; setcurs 10 10; puts ${serverip}\;'" \
+"run netdisplay0; " \
+"setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
+
 #define CONFIG_SYS_GENERIC_BOARD
 
 #define CONFIG_AM33XX
@@ -47,7 +64,7 @@
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_NET_RETRY_COUNT		4
+#define CONFIG_NET_RETRY_COUNT		2
 #define CONFIG_CMD_PING
 #define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
 #define CONFIG_MII			/* Required in net/eth.c */
@@ -57,7 +74,9 @@
 #define CONFIG_SPL_NET_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT		/* used for a fetching MAC-Address */
 #define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
-
+/* Network console */
+#define CONFIG_NETCONSOLE			1
+#define CONFIG_BOOTP_MAY_FAIL		/* if we don't have DHCP environment */
 /*
  * SPL related defines.  The Public RAM memory map the ROM defines the
  * area between 0x402F0400 and 0x4030B800 as a download area and
diff --git a/include/configs/tseries.h b/include/configs/tseries.h
index 986db3f..8e073e0 100644
--- a/include/configs/tseries.h
+++ b/include/configs/tseries.h
@@ -125,35 +125,10 @@
 
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"autoload=0\0" \
-	"loadaddr=0x80200000\0" \
-	"bootfile=zImage\0" \
-	"console=ttyO0,115200n8\0" \
-	"optargs=\0" \
-	"rootpath=/tftpboot/tseries/rootfs-small\0" \
-	"nfsopts=nolock\0" \
-	"netargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"root=/dev/nfs " \
-		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
-		"ip=dhcp\0" \
-	"netboot=echo Booting from network ...; " \
-		"setenv autoload no; " \
-		"dhcp; " \
-		"tftp ${loadaddr} ${bootfile}; " \
-		"run netargs; " \
-		"bootm ${loadaddr}\0" \
-	"usbupdate=echo Updating UBOOT from USB-Stick ...; " \
-		"usb start; " \
-		"fatload usb 0 0x80000000 updateubootusb.img; " \
-		"source;\0" \
-	"netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
-		"setenv autoload 0; " \
-		"dhcp;" \
-		"tftp 0x80000000 updateUBOOT.img;" \
-		"source;\0" \
-	NANDARGS \
-	MMCARGS
+BUR_COMMON_ENV \
+"autoload=0\0" \
+NANDARGS \
+MMCARGS
 #endif /* !CONFIG_SPL_BUILD*/
 
 #define CONFIG_BOOTCOMMAND \
-- 
1.7.10.4