[U-Boot] [u-boot 12/40] usb: dwc3: remove pm related operations from dwc3 driver
Lukasz Majewski
l.majewski at samsung.com
Mon Feb 16 11:26:30 CET 2015
Hi Kishon,
> Removed all pm related operations including pm_runtime APIs,
> suspend/resume hooks as support for these are not present in u-boot.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
> drivers/usb/dwc3/core.c | 96
> ------------------------------------------
> drivers/usb/dwc3/core.h | 16 -------
> drivers/usb/dwc3/dwc3-omap.c | 61 +++------------------------
> drivers/usb/dwc3/gadget.c | 55 ------------------------ 4 files
> changed, 5 insertions(+), 223 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index b79a8b3..ebfb6ca 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -20,7 +20,6 @@
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> #include <linux/platform_device.h>
> -#include <linux/pm_runtime.h>
> #include <linux/interrupt.h>
> #include <linux/ioport.h>
> #include <linux/io.h>
> @@ -884,10 +883,6 @@ static int dwc3_probe(struct platform_device
> *pdev) dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask);
> }
>
> - pm_runtime_enable(dev);
> - pm_runtime_get_sync(dev);
> - pm_runtime_forbid(dev);
> -
> dwc3_cache_hwparams(dwc);
>
> ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
> @@ -937,8 +932,6 @@ static int dwc3_probe(struct platform_device
> *pdev) goto err3;
> }
>
> - pm_runtime_allow(dev);
> -
> return 0;
>
> err3:
> @@ -980,97 +973,9 @@ static int dwc3_remove(struct platform_device
> *pdev)
> dwc3_core_exit(dwc);
>
> - pm_runtime_put_sync(&pdev->dev);
> - pm_runtime_disable(&pdev->dev);
> -
> - return 0;
> -}
> -
> -#ifdef CONFIG_PM_SLEEP
> -static int dwc3_suspend(struct device *dev)
> -{
> - struct dwc3 *dwc = dev_get_drvdata(dev);
> - unsigned long flags;
> -
> - spin_lock_irqsave(&dwc->lock, flags);
> -
> - switch (dwc->dr_mode) {
> - case USB_DR_MODE_PERIPHERAL:
> - case USB_DR_MODE_OTG:
> - dwc3_gadget_suspend(dwc);
> - /* FALLTHROUGH */
> - case USB_DR_MODE_HOST:
> - default:
> - dwc3_event_buffers_cleanup(dwc);
> - break;
> - }
> -
> - dwc->gctl = dwc3_readl(dwc->regs, DWC3_GCTL);
> - spin_unlock_irqrestore(&dwc->lock, flags);
> -
> - usb_phy_shutdown(dwc->usb3_phy);
> - usb_phy_shutdown(dwc->usb2_phy);
> - phy_exit(dwc->usb2_generic_phy);
> - phy_exit(dwc->usb3_generic_phy);
> -
> return 0;
> }
>
> -static int dwc3_resume(struct device *dev)
> -{
> - struct dwc3 *dwc = dev_get_drvdata(dev);
> - unsigned long flags;
> - int ret;
> -
> - usb_phy_init(dwc->usb3_phy);
> - usb_phy_init(dwc->usb2_phy);
> - ret = phy_init(dwc->usb2_generic_phy);
> - if (ret < 0)
> - return ret;
> -
> - ret = phy_init(dwc->usb3_generic_phy);
> - if (ret < 0)
> - goto err_usb2phy_init;
> -
> - spin_lock_irqsave(&dwc->lock, flags);
> -
> - dwc3_event_buffers_setup(dwc);
> - dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl);
> -
> - switch (dwc->dr_mode) {
> - case USB_DR_MODE_PERIPHERAL:
> - case USB_DR_MODE_OTG:
> - dwc3_gadget_resume(dwc);
> - /* FALLTHROUGH */
> - case USB_DR_MODE_HOST:
> - default:
> - /* do nothing */
> - break;
> - }
> -
> - spin_unlock_irqrestore(&dwc->lock, flags);
> -
> - pm_runtime_disable(dev);
> - pm_runtime_set_active(dev);
> - pm_runtime_enable(dev);
> -
> - return 0;
> -
> -err_usb2phy_init:
> - phy_exit(dwc->usb2_generic_phy);
> -
> - return ret;
> -}
> -
> -static const struct dev_pm_ops dwc3_dev_pm_ops = {
> - SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
> -};
> -
> -#define DWC3_PM_OPS &(dwc3_dev_pm_ops)
> -#else
> -#define DWC3_PM_OPS NULL
> -#endif
> -
> #ifdef CONFIG_OF
> static const struct of_device_id of_dwc3_match[] = {
> {
> @@ -1102,7 +1007,6 @@ static struct platform_driver dwc3_driver = {
> .name = "dwc3",
> .of_match_table = of_match_ptr(of_dwc3_match),
> .acpi_match_table = ACPI_PTR(dwc3_acpi_match),
> - .pm = DWC3_PM_OPS,
> },
> };
>
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index a7a7082..97f71ad 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1012,20 +1012,4 @@ static inline int
> dwc3_send_gadget_generic_command(struct dwc3 *dwc, { return 0; }
> #endif
>
> -/* power management interface */
> -#if !IS_ENABLED(CONFIG_USB_DWC3_HOST)
> -int dwc3_gadget_suspend(struct dwc3 *dwc);
> -int dwc3_gadget_resume(struct dwc3 *dwc);
> -#else
> -static inline int dwc3_gadget_suspend(struct dwc3 *dwc)
> -{
> - return 0;
> -}
> -
> -static inline int dwc3_gadget_resume(struct dwc3 *dwc)
> -{
> - return 0;
> -}
> -#endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
> -
> #endif /* __DRIVERS_USB_DWC3_CORE_H */
> diff --git a/drivers/usb/dwc3/dwc3-omap.c
> b/drivers/usb/dwc3/dwc3-omap.c index 12b57cf..ce2d6a6 100644
> --- a/drivers/usb/dwc3/dwc3-omap.c
> +++ b/drivers/usb/dwc3/dwc3-omap.c
> @@ -20,7 +20,6 @@
> #include <linux/interrupt.h>
> #include <linux/platform_device.h>
> #include <linux/platform_data/dwc3-omap.h>
> -#include <linux/pm_runtime.h>
> #include <linux/dma-mapping.h>
> #include <linux/ioport.h>
> #include <linux/io.h>
> @@ -509,13 +508,6 @@ static int dwc3_omap_probe(struct
> platform_device *pdev) omap->vbus_reg = vbus_reg;
> dev->dma_mask = &dwc3_omap_dma_mask;
>
> - pm_runtime_enable(dev);
> - ret = pm_runtime_get_sync(dev);
> - if (ret < 0) {
> - dev_err(dev, "get_sync failed with err %d\n", ret);
> - goto err0;
> - }
> -
> dwc3_omap_map_offset(omap);
> dwc3_omap_set_utmi_mode(omap);
>
> @@ -528,38 +520,33 @@ static int dwc3_omap_probe(struct
> platform_device *pdev) if (ret) {
> dev_err(dev, "failed to request IRQ #%d --> %d\n",
> omap->irq, ret);
> - goto err1;
> + goto err0;
> }
>
> dwc3_omap_enable_irqs(omap);
>
> ret = dwc3_omap_extcon_register(omap);
> if (ret < 0)
> - goto err2;
> + goto err1;
>
> ret = of_platform_populate(node, NULL, NULL, dev);
> if (ret) {
> dev_err(&pdev->dev, "failed to create dwc3 core\n");
> - goto err3;
> + goto err2;
> }
>
> return 0;
>
> -err3:
> +err2:
> if (omap->extcon_vbus_dev.edev)
> extcon_unregister_interest(&omap->extcon_vbus_dev);
> if (omap->extcon_id_dev.edev)
> extcon_unregister_interest(&omap->extcon_id_dev);
>
> -err2:
> - dwc3_omap_disable_irqs(omap);
> -
> err1:
> - pm_runtime_put_sync(dev);
> + dwc3_omap_disable_irqs(omap);
>
> err0:
> - pm_runtime_disable(dev);
> -
> return ret;
> }
>
> @@ -573,8 +560,6 @@ static int dwc3_omap_remove(struct
> platform_device *pdev)
> extcon_unregister_interest(&omap->extcon_id_dev);
> dwc3_omap_disable_irqs(omap); device_for_each_child(&pdev->dev, NULL,
> dwc3_omap_remove_core);
> - pm_runtime_put_sync(&pdev->dev);
> - pm_runtime_disable(&pdev->dev);
>
> return 0;
> }
> @@ -590,48 +575,12 @@ static const struct of_device_id
> of_dwc3_match[] = { };
> MODULE_DEVICE_TABLE(of, of_dwc3_match);
>
> -#ifdef CONFIG_PM_SLEEP
> -static int dwc3_omap_suspend(struct device *dev)
> -{
> - struct dwc3_omap *omap = dev_get_drvdata(dev);
> -
> - omap->utmi_otg_status = dwc3_omap_read_utmi_status(omap);
> - dwc3_omap_disable_irqs(omap);
> -
> - return 0;
> -}
> -
> -static int dwc3_omap_resume(struct device *dev)
> -{
> - struct dwc3_omap *omap = dev_get_drvdata(dev);
> -
> - dwc3_omap_write_utmi_status(omap, omap->utmi_otg_status);
> - dwc3_omap_enable_irqs(omap);
> -
> - pm_runtime_disable(dev);
> - pm_runtime_set_active(dev);
> - pm_runtime_enable(dev);
> -
> - return 0;
> -}
> -
> -static const struct dev_pm_ops dwc3_omap_dev_pm_ops = {
> -
> - SET_SYSTEM_SLEEP_PM_OPS(dwc3_omap_suspend, dwc3_omap_resume)
> -};
> -
> -#define DEV_PM_OPS (&dwc3_omap_dev_pm_ops)
> -#else
> -#define DEV_PM_OPS NULL
> -#endif /* CONFIG_PM_SLEEP */
> -
> static struct platform_driver dwc3_omap_driver = {
> .probe = dwc3_omap_probe,
> .remove = dwc3_omap_remove,
> .driver = {
> .name = "omap-dwc3",
> .of_match_table = of_dwc3_match,
> - .pm = DEV_PM_OPS,
> },
> };
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index ca0f0cd..7c932c6 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -2748,58 +2748,3 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
> dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
> dwc->ctrl_req, dwc->ctrl_req_addr);
> }
> -
> -int dwc3_gadget_suspend(struct dwc3 *dwc)
> -{
> - if (dwc->pullups_connected) {
> - dwc3_gadget_disable_irq(dwc);
> - dwc3_gadget_run_stop(dwc, true, true);
> - }
> -
> - __dwc3_gadget_ep_disable(dwc->eps[0]);
> - __dwc3_gadget_ep_disable(dwc->eps[1]);
> -
> - dwc->dcfg = dwc3_readl(dwc->regs, DWC3_DCFG);
> -
> - return 0;
> -}
> -
> -int dwc3_gadget_resume(struct dwc3 *dwc)
> -{
> - struct dwc3_ep *dep;
> - int ret;
> -
> - /* Start with SuperSpeed Default */
> - dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
> -
> - dep = dwc->eps[0];
> - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc,
> NULL, false,
> - false);
> - if (ret)
> - goto err0;
> -
> - dep = dwc->eps[1];
> - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc,
> NULL, false,
> - false);
> - if (ret)
> - goto err1;
> -
> - /* begin to receive SETUP packets */
> - dwc->ep0state = EP0_SETUP_PHASE;
> - dwc3_ep0_out_start(dwc);
> -
> - dwc3_writel(dwc->regs, DWC3_DCFG, dwc->dcfg);
> -
> - if (dwc->pullups_connected) {
> - dwc3_gadget_enable_irq(dwc);
> - dwc3_gadget_run_stop(dwc, true, false);
> - }
> -
> - return 0;
> -
> -err1:
> - __dwc3_gadget_ep_disable(dwc->eps[0]);
> -
> -err0:
> - return ret;
> -}
Reviewed-by: Lukasz Majewski <l.majewski at samsung.com>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
More information about the U-Boot
mailing list