[U-Boot] [PATCH v2 1/2] mx6sabre: Enable User Mass Storage

[Fabio Estevam]

User Mass Storage is very useful for flashing the on-board eMMC.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v1:
- Remove EXT2/EXT4 and BOUNCE_BUFFER support

 include/configs/mx6sabre_common.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index f0f721e..337b865 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -279,4 +279,18 @@
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
+#define CONFIG_CI_UDC
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET_DUALSPEED
+
+#define CONFIG_USB_GADGET
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW	2
+
+#define CONFIG_G_DNL_VENDOR_NUM		0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER	"FSL"
+
 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */
-- 
1.9.1