[U-Boot] [PATCH v5 7/7] Exynos: Clock: Cleanup soc_get_periph_rate

[Joonyoung Shim]

Hi Akshay,

On 02/03/2015 05:27 PM, Akshay Saraswat wrote:
> Cleaning up soc_get_periph_rate to make the logic easy to
> comprehend.
> 

Could you give more detailed description?

> Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
> ---
> Changes since v4:
> 	- New patch.
> 
>  arch/arm/cpu/armv7/exynos/clock.c | 76 +++++++++++++++++----------------------
>  1 file changed, 33 insertions(+), 43 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
> index 3884d4b..8724bc7 100644
> --- a/arch/arm/cpu/armv7/exynos/clock.c
> +++ b/arch/arm/cpu/armv7/exynos/clock.c
> @@ -366,8 +366,8 @@ static struct clk_bit_info *get_clk_bit_info(int peripheral)
>  static unsigned long exynos5_get_periph_rate(int peripheral)
>  {
>  	struct clk_bit_info *bit_info = get_clk_bit_info(peripheral);
> -	unsigned long sclk, sub_clk = 0;
> -	unsigned int src, div, sub_div = 0;
> +	unsigned long sclk = 0;
> +	unsigned int src = 0, div = 0, sub_div = 0;
>  	struct exynos5_clock *clk =
>  			(struct exynos5_clock *)samsung_get_base_clock();
>  
> @@ -389,30 +389,30 @@ static unsigned long exynos5_get_periph_rate(int peripheral)
>  		break;
>  	case PERIPH_ID_I2S0:
>  		src = readl(&clk->src_mau);
> -		div = readl(&clk->div_mau);
> +		div = sub_div = readl(&clk->div_mau);
>  	case PERIPH_ID_SPI0:
>  	case PERIPH_ID_SPI1:
>  		src = readl(&clk->src_peric1);
> -		div = readl(&clk->div_peric1);
> +		div = sub_div = readl(&clk->div_peric1);
>  		break;
>  	case PERIPH_ID_SPI2:
>  		src = readl(&clk->src_peric1);
> -		div = readl(&clk->div_peric2);
> +		div = sub_div = readl(&clk->div_peric2);
>  		break;
>  	case PERIPH_ID_SPI3:
>  	case PERIPH_ID_SPI4:
>  		src = readl(&clk->sclk_src_isp);
> -		div = readl(&clk->sclk_div_isp);
> +		div = sub_div = readl(&clk->sclk_div_isp);
>  		break;
>  	case PERIPH_ID_SDMMC0:
>  	case PERIPH_ID_SDMMC1:
>  		src = readl(&clk->src_fsys);
> -		div = readl(&clk->div_fsys1);
> +		div = sub_div = readl(&clk->div_fsys1);
>  		break;
>  	case PERIPH_ID_SDMMC2:
>  	case PERIPH_ID_SDMMC3:
>  		src = readl(&clk->src_fsys);
> -		div = readl(&clk->div_fsys2);
> +		div = sub_div = readl(&clk->div_fsys2);
>  		break;
>  	case PERIPH_ID_I2C0:
>  	case PERIPH_ID_I2C1:
> @@ -422,12 +422,10 @@ static unsigned long exynos5_get_periph_rate(int peripheral)
>  	case PERIPH_ID_I2C5:
>  	case PERIPH_ID_I2C6:
>  	case PERIPH_ID_I2C7:
> -		sclk = exynos5_get_pll_clk(MPLL);
> -		sub_div = ((readl(&clk->div_top1) >> bit_info->div_bit)
> -			    & bit_info->div_mask) + 1;
> -		div = ((readl(&clk->div_top0) >> bit_info->prediv_bit)
> -			& bit_info->prediv_mask) + 1;
> -		return (sclk / sub_div) / div;
> +		src = EXYNOS_SRC_MPLL;
> +		div = readl(&clk->div_top0);
> +		sub_div = readl(&clk->div_top1);
> +		break;
>  	default:
>  		debug("%s: invalid peripheral %d", __func__, peripheral);
>  		return -1;
> @@ -446,29 +444,26 @@ static unsigned long exynos5_get_periph_rate(int peripheral)
>  	case EXYNOS_SRC_VPLL:
>  		sclk = exynos5_get_pll_clk(VPLL);
>  		break;
> -	default:
> -		return 0;

Why remove? I think it's better to use default label and also how about
add debug log?

>  	}
>  
> -	/* Ratio clock division for this peripheral */
> -	if (bit_info->div_bit >= 0) {
> -		sub_div = (div >> bit_info->div_bit) & bit_info->div_mask;
> -		sub_clk = sclk / (sub_div + 1);
> -	}
> +	/* Clock divider ratio for this peripheral */
> +	if (bit_info->div_bit >= 0)
> +		div = (div >> bit_info->div_bit) & bit_info->div_mask;
>  
> -	if (bit_info->prediv_bit >= 0) {
> -		div = (div >> bit_info->prediv_bit) & bit_info->prediv_mask;
> -		return sub_clk / (div + 1);
> -	}
> +	/* Clock pre-divider ratio for this peripheral */
> +	if (bit_info->prediv_bit >= 0)
> +		sub_div = (sub_div >> bit_info->prediv_bit)
> +			  & bit_info->prediv_mask;
>  
> -	return sub_clk;
> +	/* Calculate and return required clock rate */
> +	return (sclk / (div + 1)) / (sub_div + 1);
>  }
>  
>  static unsigned long exynos542x_get_periph_rate(int peripheral)
>  {
>  	struct clk_bit_info *bit_info = get_clk_bit_info(peripheral);
> -	unsigned long sclk, sub_clk = 0;
> -	unsigned int src, div, sub_div = 0;
> +	unsigned long sclk = 0;
> +	unsigned int src = 0, div = 0, sub_div = 0;
>  	struct exynos5420_clock *clk =
>  			(struct exynos5420_clock *)samsung_get_base_clock();
>  
> @@ -516,10 +511,9 @@ static unsigned long exynos542x_get_periph_rate(int peripheral)
>  	case PERIPH_ID_I2C8:
>  	case PERIPH_ID_I2C9:
>  	case PERIPH_ID_I2C10:
> -		sclk = exynos542x_get_pll_clk(MPLL);
> -		sub_div = ((readl(&clk->div_top1) >> bit_info->div_bit)
> -			    & bit_info->div_mask) + 1;
> -		return sclk / sub_div;
> +		src = EXYNOS542X_SRC_MPLL;
> +		div = readl(&clk->div_top1);
> +		break;
>  	default:
>  		debug("%s: invalid peripheral %d", __func__, peripheral);
>  		return -1;
> @@ -541,23 +535,19 @@ static unsigned long exynos542x_get_periph_rate(int peripheral)
>  	case EXYNOS542X_SRC_RPLL:
>  		sclk = exynos542x_get_pll_clk(RPLL);
>  		break;
> -	default:
> -		return 0;

Ditto.

>  	}
>  
> -	/* Ratio clock division for this peripheral */
> -	if (bit_info->div_bit >= 0) {
> +	/* Clock divider ratio for this peripheral */
> +	if (bit_info->div_bit >= 0)
>  		div = (div >> bit_info->div_bit) & bit_info->div_mask;
> -		sub_clk = sclk / (div + 1);
> -	}
>  
> -	if (bit_info->prediv_bit >= 0) {
> +	/* Clock pre-divider ratio for this peripheral */
> +	if (bit_info->prediv_bit >= 0)
>  		sub_div = (sub_div >> bit_info->prediv_bit)
> -						& bit_info->prediv_mask;
> -		return sub_clk / (sub_div + 1);
> -	}
> +			  & bit_info->prediv_mask;
>  
> -	return sub_clk;
> +	/* Calculate and return required clock rate */
> +	return (sclk / (div + 1)) / (sub_div + 1);
>  }
>  
>  unsigned long clock_get_periph_rate(int peripheral)
> 

Thanks.