[U-Boot] [PATCH V3 07/11] ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1

Nishanth Menon nm at ti.com
Wed Feb 25 21:55:15 CET 2015


omap_smc1 is now generic enough to remove duplicate
omap3_gp_romcode_call logic that omap3 introduced.

As part of this change, move to using the generic lowlevel_init.S for
omap3 as well.

Signed-off-by: Nishanth Menon <nm at ti.com>
---
 arch/arm/cpu/armv7/omap-common/Makefile        |    2 +-
 arch/arm/cpu/armv7/omap-common/lowlevel_init.S |    2 ++
 arch/arm/cpu/armv7/omap3/board.c               |    6 ++----
 arch/arm/cpu/armv7/omap3/lowlevel_init.S       |   11 -----------
 arch/arm/include/asm/arch-omap3/sys_proto.h    |    2 +-
 5 files changed, 6 insertions(+), 17 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 7695e16d36f5..f3725b267c99 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -28,7 +28,7 @@ endif
 
 ifeq ($(CONFIG_OMAP34XX),)
 obj-y	+= boot-common.o
-obj-y	+= lowlevel_init.o
 endif
+obj-y	+= lowlevel_init.o
 
 obj-y	+= mem-common.o
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 9b24369e4dc1..7d0f09496d85 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -16,11 +16,13 @@
 #include <asm/arch/spl.h>
 #include <linux/linkage.h>
 
+#ifndef CONFIG_OMAP34XX
 ENTRY(save_boot_params)
 	ldr	r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS
 	str	r0, [r1]
 	bx	lr
 ENDPROC(save_boot_params)
+#endif
 
 ENTRY(omap_smc1)
 	PUSH	{r4-r12, lr}	@ save registers - ROM code may pollute
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 90d6ae7bb5f5..51abc4b09e36 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -418,8 +418,7 @@ static void omap3_update_aux_cr_secure(u32 set_bits, u32 clear_bits)
 	acr |= set_bits;
 
 	if (get_device_type() == GP_DEVICE) {
-		omap3_gp_romcode_call(OMAP3_GP_ROMCODE_API_WRITE_ACR,
-				       acr);
+		omap_smc1(OMAP3_GP_ROMCODE_API_WRITE_ACR, acr);
 	} else {
 		struct emu_hal_params emu_romcode_params;
 		emu_romcode_params.num_params = 1;
@@ -459,8 +458,7 @@ static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
 static void omap3_invalidate_l2_cache_secure(void)
 {
 	if (get_device_type() == GP_DEVICE) {
-		omap3_gp_romcode_call(OMAP3_GP_ROMCODE_API_L2_INVAL,
-				      0);
+		omap_smc1(OMAP3_GP_ROMCODE_API_L2_INVAL, 0);
 	} else {
 		struct emu_hal_params emu_romcode_params;
 		emu_romcode_params.num_params = 1;
diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
index 78577b1d1c75..84591b8b5bab 100644
--- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
@@ -27,17 +27,6 @@ ENTRY(save_boot_params)
 ENDPROC(save_boot_params)
 #endif
 
-ENTRY(omap3_gp_romcode_call)
-	PUSH {r4-r12, lr} @ Save all registers from ROM code!
-	MOV r12, r0	@ Copy the Service ID in R12
-	MOV r0, r1	@ Copy parameter to R0
-	mcr     p15, 0, r0, c7, c10, 4	@ DSB
-	mcr     p15, 0, r0, c7, c10, 5	@ DMB
-	.word	0xe1600070	@ SMC #0 to enter monitor - hand assembled
-				@ because we use -march=armv5
-	POP {r4-r12, pc}
-ENDPROC(omap3_gp_romcode_call)
-
 /*
  * Funtion for making PPA HAL API calls in secure devices
  * Input:
diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
index bcf92fbe658b..c06605d533d3 100644
--- a/arch/arm/include/asm/arch-omap3/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
@@ -73,6 +73,6 @@ void power_init_r(void);
 void dieid_num_r(void);
 void get_dieid(u32 *id);
 void do_omap3_emu_romcode_call(u32 service_id, u32 parameters);
-void omap3_gp_romcode_call(u32 service_id, u32 parameter);
+void omap_smc1(u32 service, u32 val);
 u32 warm_reset(void);
 #endif
-- 
1.7.9.5



More information about the U-Boot mailing list