[U-Boot] [PATCH v3 04/12] ARM: Put target PC for PSCI CPU_ON on per-CPU stack

Jan Kiszka jan.kiszka at siemens.com
Wed Feb 18 09:13:58 CET 2015


Use a per-CPU variable for saving the target PC during CPU_ON
operations. This allows us to run this service independently on targets
that have more than 2 cores and also core-local power control.

Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---
 arch/arm/cpu/armv7/psci.S       | 8 ++------
 arch/arm/cpu/armv7/sunxi/psci.S | 9 ++++++---
 2 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/arch/arm/cpu/armv7/psci.S b/arch/arm/cpu/armv7/psci.S
index da47934..9674503 100644
--- a/arch/arm/cpu/armv7/psci.S
+++ b/arch/arm/cpu/armv7/psci.S
@@ -179,6 +179,7 @@ ENTRY(psci_get_cpu_stack_top)
 	add	r5, r5, #0x2000			@ Skip two pages
 	lsr	r5, r5, #12			@ Align to start of page
 	lsl	r5, r5, #12
+	sub	r5, r5, #4			@ reserve 1 word for target PC
 	sub	r5, r5, r4			@ here's our stack!
 
 	bx	lr
@@ -194,13 +195,8 @@ ENTRY(psci_cpu_entry)
 	bl	_nonsec_init
 	bl	psci_arch_init
 
-	adr	r0, _psci_target_pc
-	ldr	r0, [r0]
+	ldr	r0, [sp]			@ target PC at stack top
 	b	_do_nonsec_entry
 ENDPROC(psci_cpu_entry)
 
-.globl _psci_target_pc
-_psci_target_pc:
-	.word	0
-
 	.popsection
diff --git a/arch/arm/cpu/armv7/sunxi/psci.S b/arch/arm/cpu/armv7/sunxi/psci.S
index 4372022..8d964d0 100644
--- a/arch/arm/cpu/armv7/sunxi/psci.S
+++ b/arch/arm/cpu/armv7/sunxi/psci.S
@@ -138,8 +138,11 @@ out:	mcr	p15, 0, r7, c1, c1, 0
 	@ r2 = target PC
 .globl	psci_cpu_on
 psci_cpu_on:
-	ldr	r0, =_psci_target_pc
-	str	r2, [r0]
+	push	{lr}
+
+	mov	r4, r1
+	bl	psci_get_cpu_stack_top	@ get stack top of target CPU
+	str	r2, [r5]		@ store target PC at stack top
 	dsb
 
 	movw	r0, #(SUN7I_CPUCFG_BASE & 0xffff)
@@ -194,7 +197,7 @@ psci_cpu_on:
 	str	r6, [r0, #0x1e4]
 
 	mov	r0, #ARM_PSCI_RET_SUCCESS	@ Return PSCI_RET_SUCCESS
-	mov	pc, lr
+	pop	{pc}
 
 .globl	psci_cpu_off
 psci_cpu_off:
-- 
2.1.4



More information about the U-Boot mailing list