[U-Boot] rpi_2 builds fine with make, fails with buildman

[Albert ARIBAUD]

Hello Stephen,

On Tue, 24 Feb 2015 09:51:56 -0700, Stephen Warren
<swarren at wwwdotorg.org> wrote:
> On 02/24/2015 01:48 AM, Albert ARIBAUD wrote:
> > Hello,
> >
> > Can anyone confirm that on current u-boot/master, rpi_2 build fine with
> >
> > 	git clean -xfd; make rpi_2_defconfig; make
> >
> > but fails with
> >
> > 	tools/buildman/buildman rpi_2
> >
> > with the following error:
> >
> >>         arm: +   rpi_2
> >> +make[3]: *** No rule to make target 'arch/arm/cpu/armv7/bcm2835/../../arm1176/bcm2835//init.o', needed by 'arch/arm/cpu/armv7/bcm2835/built-in.o'.  Stop.
> >> +make[2]: *** [arch/arm/cpu/armv7/bcm2835] Error 2
> >> +make[1]: *** [arch/arm/cpu/armv7] Error 2
> >> +make: *** [sub-make] Error 2
> >
> > My gut feeling is that the problem lies with the fact that
> > arch/arm/cpu/armv7/bcm2835/ contains a Makefile which refers to
> > init.o, reset.o, timer.o and mbox.o but the source code for these
> > resides in another directory, arch/arm/cpu/arm1176/bcm2835/.
> >
> > CC:ing Stephen as directory arch/arm/cpu/armv7/bcm2835/ was introduced
> > by his commit db75356f (committed by Tom, also cc:) and Simon, since
> > the issue is related to buildman.
> 
> This problem exists with quite a few boards, including the rpi port 
> before the addition of rpi_2 support. It's a bit intermittent which may 
> be why you didn't notice before.
> 
> See the following, and replies:
> http://lists.denx.de/pipermail/u-boot/2015-February/205255.html

Thanks. Indeed it hadn't bitten me so far.

Amicalement,
-- 
Albert.