[U-Boot] [PATCH V2 9/9] ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration

[Nishanth Menon]

Update to existing recommendation for L2ACTLR configuration to prevent
system instability and optimize performance.

These apply to both OMAP5 and DRA7.

Reported-by: Vivek Chengalvala <vchengalvala at ti.com>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
 arch/arm/cpu/armv7/omap5/hwinit.c           |   16 ++++++++++++++++
 arch/arm/include/asm/arch-omap5/sys_proto.h |    3 +++
 2 files changed, 19 insertions(+)

diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index a8a474a88be9..632df4f0bfae 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -304,6 +304,21 @@ void config_data_eye_leveling_samples(u32 emif_base)
 		       (*ctrl)->control_emif2_sdram_config_ext);
 }
 
+void init_cpu_configuration(void)
+{
+	u32 l2actlr;
+
+	asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r"(l2actlr));
+	/*
+	 * L2ACTLR: Ensure to enable the following:
+	 * 3: Disable clean/evict push to external
+	 * 4: Disable WriteUnique and WriteLineUnique transactions from master
+	 * 8: Disable DVM/CMO message broadcast
+	 */
+	l2actlr |= 0x118;
+	omap_smc1(OMAP5_SERVICE_L2ACTLR_SET, l2actlr);
+}
+
 void init_omap_revision(void)
 {
 	/*
@@ -342,6 +357,7 @@ void init_omap_revision(void)
 	default:
 		*omap_si_rev = OMAP5430_SILICON_ID_INVALID;
 	}
+	init_cpu_configuration();
 }
 
 void reset_cpu(ulong ignored)
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index 0a7a52d138df..e2e186859373 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -67,4 +67,7 @@ static inline u32 usec_to_32k(u32 usec)
 {
 	return div_round_up(32768 * usec, 1000000);
 }
+
+#define OMAP5_SERVICE_L2ACTLR_SET    0x104
+
 #endif
-- 
1.7.9.5