[U-Boot] [RFC PATCH v3 4/7] x86: quark: Add Cache-As-RAM initialization

[Bin Meng]

Quark SoC contains an embedded 512KiB SRAM (eSRAM) that is
initialized by hardware. eSRAM is the ideal place to be used
for Cache-As-RAM (CAR) before system memory is available.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>

---

Changes in v3:
- Use macros from <asm/pci.h> and <asm/arch/quark.h>

Changes in v2:
- Replace upper case register names (EAX etc.) with lower case
- Use some macros from <asm/arch/msg_port.h> and <asm/arch/quark.h>

 arch/x86/cpu/quark/car.S | 105 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)
 create mode 100644 arch/x86/cpu/quark/car.S

diff --git a/arch/x86/cpu/quark/car.S b/arch/x86/cpu/quark/car.S
new file mode 100644
index 0000000..3432ffa
--- /dev/null
+++ b/arch/x86/cpu/quark/car.S
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn at gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm/pci.h>
+#include <asm/post.h>
+#include <asm/arch/quark.h>
+#include <asm/arch/msg_port.h>
+
+.globl car_init
+car_init:
+	post_code(POST_CAR_START)
+
+	/*
+	 * Quark SoC contains an embedded 512KiB SRAM (eSRAM) that is
+	 * initialized by hardware. eSRAM is the ideal place to be used
+	 * for Cache-As-RAM (CAR) before system memory is available.
+	 *
+	 * Relocate this eSRAM to a suitable location in the physical
+	 * memory map and enable it.
+	 */
+
+	/* Host Memory Bound Register P03h:R08h */
+	mov	$((MSG_PORT_HOST_BRIDGE << 16) | (HM_BOUND << 8)), %eax
+	mov	$(DRAM_BASE + DRAM_MAX_SIZE + ESRAM_SIZE), %edx
+	lea	1f, %esp
+	jmp	msg_port_write
+1:
+
+	/* eSRAM Block Page Control Register P05h:R82h */
+	mov	$((MSG_PORT_MEM_MGR << 16) | (ESRAM_BLK_CTRL << 8)), %eax
+	mov	$(ESRAM_BLOCK_MODE | (CONFIG_ESRAM_BASE >> 24)), %edx
+	lea	2f, %esp
+	jmp	msg_port_write
+2:
+
+	post_code(POST_CAR_CPU_CACHE)
+	jmp	car_init_ret
+
+msg_port_read:
+	/*
+	 * Parameter:
+	 *   eax[23:16] - Message Port ID
+	 *   eax[15:08] - Register Address
+	 *
+	 * Return Value:
+	 *   eax - Message Port Register value
+	 *
+	 * Return Address: esp
+	 */
+
+	or	$((MSG_OP_READ << 24) | MSG_BYTE_ENABLE), %eax
+	mov	%eax, %ebx
+
+	/* Write MCR B0:D0:F0:RD0 */
+	mov	$(PCI_CFG_EN | MSG_CTRL_REG), %eax
+	mov	$PCI_REG_ADDR, %dx
+	out	%eax, %dx
+	mov	$PCI_REG_DATA, %dx
+	mov	%ebx, %eax
+	out	%eax, %dx
+
+	/* Read MDR B0:D0:F0:RD4 */
+	mov	$(PCI_CFG_EN | MSG_DATA_REG), %eax
+	mov	$PCI_REG_ADDR, %dx
+	out	%eax, %dx
+	mov	$PCI_REG_DATA, %dx
+	in	%dx, %eax
+
+	jmp	*%esp
+
+msg_port_write:
+	/*
+	 * Parameter:
+	 *   eax[23:16] - Message Port ID
+	 *   eax[15:08] - Register Address
+	 *   edx        - Message Port Register value to write
+	 *
+	 * Return Address: esp
+	 */
+
+	or	$((MSG_OP_WRITE << 24) | MSG_BYTE_ENABLE), %eax
+	mov	%eax, %esi
+	mov	%edx, %edi
+
+	/* Write MDR B0:D0:F0:RD4 */
+	mov	$(PCI_CFG_EN | MSG_DATA_REG), %eax
+	mov	$PCI_REG_ADDR, %dx
+	out	%eax, %dx
+	mov	$PCI_REG_DATA, %dx
+	mov	%edi, %eax
+	out	%eax, %dx
+
+	/* Write MCR B0:D0:F0:RD0 */
+	mov	$(PCI_CFG_EN | MSG_CTRL_REG), %eax
+	mov	$PCI_REG_ADDR, %dx
+	out	%eax, %dx
+	mov	$PCI_REG_DATA, %dx
+	mov	%esi, %eax
+	out	%eax, %dx
+
+	jmp	*%esp
-- 
1.8.2.1