[U-Boot] [PATCH 5/9] ARM: tegra: pinmux: partially handle varying register layouts
Stephen Warren
swarren at wwwdotorg.org
Tue Feb 24 22:08:27 CET 2015
From: Stephen Warren <swarren at nvidia.com>
Tegra210 moves some bits around in the pinmux registers. Update the code
to handle this.
This doesn't attempt to address the issues with the group-to-group varying
drive group register layout mentioned earlier. This patch handles the
SoC-to-SoC differences in the mux register layout.
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
arch/arm/cpu/tegra-common/pinmux-common.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/cpu/tegra-common/pinmux-common.c b/arch/arm/cpu/tegra-common/pinmux-common.c
index 843c688200b3..1730d20312b0 100644
--- a/arch/arm/cpu/tegra-common/pinmux-common.c
+++ b/arch/arm/cpu/tegra-common/pinmux-common.c
@@ -101,11 +101,23 @@
#define DRV_REG(group) _R(0x868 + ((group) * 4))
+/*
+ * We could force arch-tegraNN/pinmux.h to define all of these. However,
+ * that's a lot of defines, and for now it's manageable to just put a
+ * special case here. It's possible this decision will change with future
+ * SoCs.
+ */
+#ifdef CONFIG_TEGRA210
+#define IO_SHIFT 6
+#define LOCK_SHIFT 7
+#define OD_SHIFT 11
+#else
#define IO_SHIFT 5
#define OD_SHIFT 6
#define LOCK_SHIFT 7
#define IO_RESET_SHIFT 8
#define RCV_SEL_SHIFT 9
+#endif
#ifdef TEGRA_PMX_SOC_HAS_IO_CLAMPING
/* This register/field only exists on Tegra114 and later */
--
1.9.1
More information about the U-Boot
mailing list