[U-Boot] [PATCH v3 23/25] tegra: video: support eDP displays on Tegra124 devices
Simon Glass
sjg at chromium.org
Wed Feb 11 15:52:16 CET 2015
Connect up the clocks and the eDP driver to make these displays work with
Tegra124-based devices.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v3:
- Change parameters of update_display_mode()
Changes in v2:
- Rebase on top of u-boot-dm
arch/arm/include/asm/arch-tegra124/display.h | 58 +++++
drivers/video/Kconfig | 8 +
drivers/video/tegra124/Makefile | 2 +
drivers/video/tegra124/display.c | 358 +++++++++++++++++++++++++++
drivers/video/tegra124/tegra124-lcd.c | 94 +++++++
5 files changed, 520 insertions(+)
create mode 100644 arch/arm/include/asm/arch-tegra124/display.h
create mode 100644 drivers/video/tegra124/display.c
create mode 100644 drivers/video/tegra124/tegra124-lcd.c
diff --git a/arch/arm/include/asm/arch-tegra124/display.h b/arch/arm/include/asm/arch-tegra124/display.h
new file mode 100644
index 0000000..ca6644a
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra124/display.h
@@ -0,0 +1,58 @@
+/*
+ * (C) Copyright 2010
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_TEGRA_DISPLAY_H
+#define __ASM_ARCH_TEGRA_DISPLAY_H
+
+/**
+ * Register a new display based on device tree configuration.
+ *
+ * The frame buffer can be positioned by U-Boot or overriden by the fdt.
+ * You should pass in the U-Boot address here, and check the contents of
+ * struct fdt_disp_config to see what was actually chosen.
+ *
+ * @param blob Device tree blob
+ * @param default_lcd_base Default address of LCD frame buffer
+ * @return 0 if ok, -1 on error (unsupported bits per pixel)
+ */
+int tegra_display_probe(const void *blob, void *default_lcd_base);
+
+/**
+ * Return the current display configuration
+ *
+ * @return pointer to display configuration, or NULL if there is no valid
+ * config
+ */
+struct fdt_disp_config *tegra_display_get_config(void);
+
+/**
+ * Perform the next stage of the LCD init if it is time to do so.
+ *
+ * LCD init can be time-consuming because of the number of delays we need
+ * while waiting for the backlight power supply, etc. This function can
+ * be called at various times during U-Boot operation to advance the
+ * initialization of the LCD to the next stage if sufficient time has
+ * passed since the last stage. It keeps track of what stage it is up to
+ * and the time that it is permitted to move to the next stage.
+ *
+ * The final call should have wait=1 to complete the init.
+ *
+ * @param blob fdt blob containing LCD information
+ * @param wait 1 to wait until all init is complete, and then return
+ * 0 to return immediately, potentially doing nothing if it is
+ * not yet time for the next init.
+ */
+int tegra_lcd_check_next_stage(const void *blob, int wait);
+
+/**
+ * Set up the maximum LCD size so we can size the frame buffer.
+ *
+ * @param blob fdt blob containing LCD information
+ */
+void tegra_lcd_early_init(const void *blob);
+
+#endif /*__ASM_ARCH_TEGRA_DISPLAY_H*/
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 62af63a..2544301 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -95,3 +95,11 @@ config DISPLAY_PORT
eDP (Embedded DisplayPort) is a standard widely used in laptops
to drive LCD panels. This framework provides support for enabling
these displays where supported by the video hardware.
+
+config VIDEO_TEGRA124
+ bool "Enable video support on Tegra124"
+ help
+ Tegra124 supports many video output options including eDP and
+ HDMI. At present only eDP is supported by U-Boot. This option
+ enables this support which can be used on devices which
+ have an eDP display connected.
diff --git a/drivers/video/tegra124/Makefile b/drivers/video/tegra124/Makefile
index 7e08ee9..52eedb0 100644
--- a/drivers/video/tegra124/Makefile
+++ b/drivers/video/tegra124/Makefile
@@ -4,5 +4,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
+obj-y += display.o
obj-y += dp.o
obj-y += sor.o
+obj-y += tegra124-lcd.o
diff --git a/drivers/video/tegra124/display.c b/drivers/video/tegra124/display.c
new file mode 100644
index 0000000..372ad3e
--- /dev/null
+++ b/drivers/video/tegra124/display.c
@@ -0,0 +1,358 @@
+/*
+ * Copyright 2014 Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Extracted from Chromium coreboot commit 3f59b13d
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <edid.h>
+#include <errno.h>
+#include <displayport.h>
+#include <edid.h>
+#include <fdtdec.h>
+#include <lcd.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/pwm.h>
+#include <asm/arch-tegra/dc.h>
+#include "displayport.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* return in 1000ths of a Hertz */
+static int tegra_dc_calc_refresh(const struct display_timing *timing)
+{
+ int h_total, v_total, refresh;
+ int pclk = timing->pixelclock.typ;
+
+ h_total = timing->hactive.typ + timing->hfront_porch.typ +
+ timing->hback_porch.typ + timing->hsync_len.typ;
+ v_total = timing->vactive.typ + timing->vfront_porch.typ +
+ timing->vback_porch.typ + timing->vsync_len.typ;
+ if (!pclk || !h_total || !v_total)
+ return 0;
+ refresh = pclk / h_total;
+ refresh *= 1000;
+ refresh /= v_total;
+
+ return refresh;
+}
+
+static void print_mode(const struct display_timing *timing)
+{
+ int refresh = tegra_dc_calc_refresh(timing);
+
+ debug("MODE:%dx%d@%d.%03uHz pclk=%d\n",
+ timing->hactive.typ, timing->vactive.typ, refresh / 1000,
+ refresh % 1000, timing->pixelclock.typ);
+}
+
+static int update_display_mode(struct dc_ctlr *disp_ctrl,
+ const struct display_timing *timing,
+ int href_to_sync, int vref_to_sync)
+{
+ print_mode(timing);
+
+ writel(0x1, &disp_ctrl->disp.disp_timing_opt);
+
+ writel(vref_to_sync << 16 | href_to_sync,
+ &disp_ctrl->disp.ref_to_sync);
+
+ writel(timing->vsync_len.typ << 16 | timing->hsync_len.typ,
+ &disp_ctrl->disp.sync_width);
+
+ writel(((timing->vback_porch.typ - vref_to_sync) << 16) |
+ timing->hback_porch.typ, &disp_ctrl->disp.back_porch);
+
+ writel(((timing->vfront_porch.typ + vref_to_sync) << 16) |
+ timing->hfront_porch.typ, &disp_ctrl->disp.front_porch);
+
+ writel(timing->hactive.typ | (timing->vactive.typ << 16),
+ &disp_ctrl->disp.disp_active);
+
+ /**
+ * We want to use PLLD_out0, which is PLLD / 2:
+ * PixelClock = (PLLD / 2) / ShiftClockDiv / PixelClockDiv.
+ *
+ * Currently most panels work inside clock range 50MHz~100MHz, and PLLD
+ * has some requirements to have VCO in range 500MHz~1000MHz (see
+ * clock.c for more detail). To simplify calculation, we set
+ * PixelClockDiv to 1 and ShiftClockDiv to 1. In future these values
+ * may be calculated by clock_display, to allow wider frequency range.
+ *
+ * Note ShiftClockDiv is a 7.1 format value.
+ */
+ const u32 shift_clock_div = 1;
+ writel((PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT) |
+ ((shift_clock_div - 1) * 2) << SHIFT_CLK_DIVIDER_SHIFT,
+ &disp_ctrl->disp.disp_clk_ctrl);
+ debug("%s: PixelClock=%u, ShiftClockDiv=%u\n", __func__,
+ timing->pixelclock.typ, shift_clock_div);
+ return 0;
+}
+
+static int tegra_depth_for_bpp(int bpp)
+{
+ switch (bpp) {
+ case 32:
+ return COLOR_DEPTH_R8G8B8A8;
+ case 16:
+ return COLOR_DEPTH_B5G6R5;
+ default:
+ debug("Unsupported LCD bit depth");
+ return -1;
+ }
+}
+
+static int update_window(struct dc_ctlr *disp_ctrl,
+ u32 frame_buffer, int fb_bits_per_pixel,
+ const struct display_timing *timing)
+{
+ const u32 colour_white = 0xffffff;
+ int colour_depth;
+ u32 val;
+
+ writel(WINDOW_A_SELECT, &disp_ctrl->cmd.disp_win_header);
+
+ writel(((timing->vactive.typ << 16) | timing->hactive.typ),
+ &disp_ctrl->win.size);
+ writel(((timing->vactive.typ << 16) |
+ (timing->hactive.typ * fb_bits_per_pixel / 8)),
+ &disp_ctrl->win.prescaled_size);
+ writel(((timing->hactive.typ * fb_bits_per_pixel / 8 + 31) /
+ 32 * 32), &disp_ctrl->win.line_stride);
+
+ colour_depth = tegra_depth_for_bpp(fb_bits_per_pixel);
+ if (colour_depth == -1)
+ return -EINVAL;
+
+ writel(colour_depth, &disp_ctrl->win.color_depth);
+
+ writel(frame_buffer, &disp_ctrl->winbuf.start_addr);
+ writel(0x1000 << V_DDA_INC_SHIFT | 0x1000 << H_DDA_INC_SHIFT,
+ &disp_ctrl->win.dda_increment);
+
+ writel(colour_white, &disp_ctrl->disp.blend_background_color);
+ writel(CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT,
+ &disp_ctrl->cmd.disp_cmd);
+
+ writel(WRITE_MUX_ACTIVE, &disp_ctrl->cmd.state_access);
+
+ val = GENERAL_ACT_REQ | WIN_A_ACT_REQ;
+ val |= GENERAL_UPDATE | WIN_A_UPDATE;
+ writel(val, &disp_ctrl->cmd.state_ctrl);
+
+ /* Enable win_a */
+ val = readl(&disp_ctrl->win.win_opt);
+ writel(val | WIN_ENABLE, &disp_ctrl->win.win_opt);
+
+ return 0;
+}
+
+static int tegra_dc_init(struct dc_ctlr *disp_ctrl)
+{
+ /* do not accept interrupts during initialization */
+ writel(0x00000000, &disp_ctrl->cmd.int_mask);
+ writel(WRITE_MUX_ASSEMBLY | READ_MUX_ASSEMBLY,
+ &disp_ctrl->cmd.state_access);
+ writel(WINDOW_A_SELECT, &disp_ctrl->cmd.disp_win_header);
+ writel(0x00000000, &disp_ctrl->win.win_opt);
+ writel(0x00000000, &disp_ctrl->win.byte_swap);
+ writel(0x00000000, &disp_ctrl->win.buffer_ctrl);
+
+ writel(0x00000000, &disp_ctrl->win.pos);
+ writel(0x00000000, &disp_ctrl->win.h_initial_dda);
+ writel(0x00000000, &disp_ctrl->win.v_initial_dda);
+ writel(0x00000000, &disp_ctrl->win.dda_increment);
+ writel(0x00000000, &disp_ctrl->win.dv_ctrl);
+
+ writel(0x01000000, &disp_ctrl->win.blend_layer_ctrl);
+ writel(0x00000000, &disp_ctrl->win.blend_match_select);
+ writel(0x00000000, &disp_ctrl->win.blend_nomatch_select);
+ writel(0x00000000, &disp_ctrl->win.blend_alpha_1bit);
+
+ writel(0x00000000, &disp_ctrl->winbuf.start_addr_hi);
+ writel(0x00000000, &disp_ctrl->winbuf.addr_h_offset);
+ writel(0x00000000, &disp_ctrl->winbuf.addr_v_offset);
+
+ writel(0x00000000, &disp_ctrl->com.crc_checksum);
+ writel(0x00000000, &disp_ctrl->com.pin_output_enb[0]);
+ writel(0x00000000, &disp_ctrl->com.pin_output_enb[1]);
+ writel(0x00000000, &disp_ctrl->com.pin_output_enb[2]);
+ writel(0x00000000, &disp_ctrl->com.pin_output_enb[3]);
+ writel(0x00000000, &disp_ctrl->disp.disp_signal_opt0);
+
+ return 0;
+}
+
+static void dump_config(int panel_bpp, struct display_timing *timing)
+{
+ printf("timing->hactive.typ = %d\n", timing->hactive.typ);
+ printf("timing->vactive.typ = %d\n", timing->vactive.typ);
+ printf("timing->pixelclock.typ = %d\n", timing->pixelclock.typ);
+
+ printf("timing->hfront_porch.typ = %d\n", timing->hfront_porch.typ);
+ printf("timing->hsync_len.typ = %d\n", timing->hsync_len.typ);
+ printf("timing->hback_porch.typ = %d\n", timing->hback_porch.typ);
+
+ printf("timing->vfront_porch.typ %d\n", timing->vfront_porch.typ);
+ printf("timing->vsync_len.typ = %d\n", timing->vsync_len.typ);
+ printf("timing->vback_porch.typ = %d\n", timing->vback_porch.typ);
+
+ printf("panel_bits_per_pixel = %d\n", panel_bpp);
+}
+
+static int display_update_config_from_edid(struct udevice *dp_dev,
+ int *panel_bppp,
+ struct display_timing *timing)
+{
+ u8 buf[EDID_SIZE];
+ int bpc, ret;
+
+ ret = display_port_read_edid(dp_dev, buf, sizeof(buf));
+ if (ret < 0)
+ return ret;
+ ret = edid_get_timing(buf, ret, timing, &bpc);
+ if (ret)
+ return ret;
+
+ /* Use this information if valid */
+ if (bpc != -1)
+ *panel_bppp = bpc * 3;
+
+ return 0;
+}
+
+/* Somewhat torturous method */
+static int get_backlight_info(const void *blob, struct gpio_desc *vdd,
+ struct gpio_desc *enable, int *pwmp)
+{
+ int sor, panel, backlight, power;
+ const u32 *prop;
+ int len;
+ int ret;
+
+ *pwmp = 0;
+ sor = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA124_SOR);
+ if (sor < 0)
+ return -ENOENT;
+ panel = fdtdec_lookup_phandle(blob, sor, "nvidia,panel");
+ if (panel < 0)
+ return -ENOENT;
+ backlight = fdtdec_lookup_phandle(blob, panel, "backlight");
+ if (backlight < 0)
+ return -ENOENT;
+ ret = gpio_request_by_name_nodev(blob, backlight, "enable-gpios", 0,
+ enable, GPIOD_IS_OUT);
+ if (ret)
+ return ret;
+ prop = fdt_getprop(blob, backlight, "pwms", &len);
+ if (!prop || len != 3 * sizeof(u32))
+ return -EINVAL;
+ *pwmp = fdt32_to_cpu(prop[1]);
+
+ power = fdtdec_lookup_phandle(blob, backlight, "power-supply");
+ if (power < 0)
+ return -ENOENT;
+ ret = gpio_request_by_name_nodev(blob, power, "gpio", 0, vdd,
+ GPIOD_IS_OUT);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ dm_gpio_free(NULL, enable);
+ return ret;
+}
+
+int display_init(void *lcdbase, int fb_bits_per_pixel,
+ struct display_timing *timing)
+{
+ struct dc_ctlr *dc_ctlr;
+ const void *blob = gd->fdt_blob;
+ struct udevice *dp_dev;
+ const int href_to_sync = 1, vref_to_sync = 1;
+ int panel_bpp = 18; /* default 18 bits per pixel */
+ u32 plld_rate;
+ struct gpio_desc vdd_gpio, enable_gpio;
+ int pwm;
+ int node;
+ int ret;
+
+ ret = uclass_get_device(UCLASS_DISPLAY_PORT, 0, &dp_dev);
+ if (ret)
+ return ret;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA124_DC);
+ if (node < 0)
+ return -ENOENT;
+ dc_ctlr = (struct dc_ctlr *)fdtdec_get_addr(blob, node, "reg");
+ if (fdtdec_decode_display_timing(blob, node, 0, timing))
+ return -EINVAL;
+
+ ret = display_update_config_from_edid(dp_dev, &panel_bpp, timing);
+ if (ret) {
+ debug("%s: Failed to decode EDID, using defaults\n", __func__);
+ dump_config(panel_bpp, timing);
+ }
+
+ if (!get_backlight_info(blob, &vdd_gpio, &enable_gpio, &pwm)) {
+ dm_gpio_set_value(&vdd_gpio, 1);
+ debug("%s: backlight vdd setting gpio %08x to %d\n",
+ __func__, gpio_get_number(&vdd_gpio), 1);
+ }
+
+ /*
+ * The plld is programmed with the assumption of the SHIFT_CLK_DIVIDER
+ * and PIXEL_CLK_DIVIDER are zero (divide by 1). See the
+ * update_display_mode() for detail.
+ */
+ plld_rate = clock_set_display_rate(timing->pixelclock.typ * 2);
+ if (plld_rate == 0) {
+ printf("dc: clock init failed\n");
+ return -EIO;
+ } else if (plld_rate != timing->pixelclock.typ * 2) {
+ debug("dc: plld rounded to %u\n", plld_rate);
+ timing->pixelclock.typ = plld_rate / 2;
+ }
+
+ /* Init dc */
+ ret = tegra_dc_init(dc_ctlr);
+ if (ret) {
+ debug("dc: init failed\n");
+ return ret;
+ }
+
+ /* Configure dc mode */
+ ret = update_display_mode(dc_ctlr, timing, href_to_sync, vref_to_sync);
+ if (ret) {
+ debug("dc: failed to configure display mode\n");
+ return ret;
+ }
+
+ /* Enable dp */
+ ret = display_port_enable(dp_dev, panel_bpp, timing);
+ if (ret)
+ return ret;
+
+ ret = update_window(dc_ctlr, (ulong)lcdbase, fb_bits_per_pixel, timing);
+ if (ret)
+ return ret;
+
+ /* Set up Tegra PWM to drive the panel backlight */
+ pwm_enable(pwm, 0, 220, 0x2e);
+ udelay(10 * 1000);
+
+ if (dm_gpio_is_valid(&enable_gpio)) {
+ dm_gpio_set_value(&enable_gpio, 1);
+ debug("%s: backlight enable setting gpio %08x to %d\n",
+ __func__, gpio_get_number(&enable_gpio), 1);
+ }
+
+ return 0;
+}
diff --git a/drivers/video/tegra124/tegra124-lcd.c b/drivers/video/tegra124/tegra124-lcd.c
new file mode 100644
index 0000000..55f63b1
--- /dev/null
+++ b/drivers/video/tegra124/tegra124-lcd.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright 2014 Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <lcd.h>
+#include <asm/gpio.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch-tegra/dc.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+ /* Maximum LCD size we support */
+ LCD_MAX_WIDTH = 1920,
+ LCD_MAX_HEIGHT = 1200,
+ LCD_MAX_LOG2_BPP = 4, /* 2^4 = 16 bpp */
+};
+
+vidinfo_t panel_info = {
+ /* Insert a value here so that we don't end up in the BSS */
+ .vl_col = -1,
+};
+
+int tegra_lcd_check_next_stage(const void *blob, int wait)
+{
+ return 0;
+}
+
+void tegra_lcd_early_init(const void *blob)
+{
+ /*
+ * Go with the maximum size for now. We will fix this up after
+ * relocation. These values are only used for memory alocation.
+ */
+ panel_info.vl_col = LCD_MAX_WIDTH;
+ panel_info.vl_row = LCD_MAX_HEIGHT;
+ panel_info.vl_bpix = LCD_MAX_LOG2_BPP;
+}
+
+static int tegra124_lcd_init(void *lcdbase)
+{
+ struct display_timing timing;
+
+ clock_set_up_plldp();
+ clock_adjust_periph_pll_div(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH,
+ 408000000, NULL);
+
+ clock_enable(PERIPH_ID_HOST1X);
+ clock_enable(PERIPH_ID_DISP1);
+ clock_enable(PERIPH_ID_PWM);
+ clock_enable(PERIPH_ID_DPAUX);
+ clock_enable(PERIPH_ID_SOR0);
+
+ udelay(2);
+
+ reset_set_enable(PERIPH_ID_HOST1X, 0);
+ reset_set_enable(PERIPH_ID_DISP1, 0);
+ reset_set_enable(PERIPH_ID_PWM, 0);
+ reset_set_enable(PERIPH_ID_DPAUX, 0);
+ reset_set_enable(PERIPH_ID_SOR0, 0);
+
+ display_init(lcdbase, 1 << LCD_BPP, &timing);
+
+ panel_info.vl_col = roundup(timing.hactive.typ, 16);
+ panel_info.vl_row = timing.vactive.typ;
+
+ lcd_set_flush_dcache(1);
+
+ return 0;
+}
+
+void lcd_ctrl_init(void *lcdbase)
+{
+ ulong start;
+ int ret;
+
+ start = get_timer(0);
+ ret = tegra124_lcd_init(lcdbase);
+ debug("LCD init took %lu ms\n", get_timer(start));
+ if (ret)
+ printf("%s: Error %d\n", __func__, ret);
+}
+
+void lcd_enable(void)
+{
+}
--
2.2.0.rc0.207.ga3a616c
More information about the U-Boot
mailing list