[U-Boot] [PATCH] imx6: Added DEK blob generator command

Ruchika Gupta ruchika.gupta at freescale.com
Mon Feb 9 12:37:37 CET 2015


Hi Ulises,

> -----Original Message-----
> From: Ulises.Cardenas at freescale.com [mailto:Ulises.Cardenas at freescale.com]
> Sent: Thursday, February 05, 2015 2:38 AM
> To: Gupta Ruchika-R66431
> Cc: u-boot at lists.denx.de; Estevam Fabio-R49496; sbabic at denx.de; Ulises
> Cardenas Casas; Garg Nitin-B37173
> Subject: [PATCH] imx6: Added DEK blob generator command
> 
> From: Raul Cardenas <Ulises.Cardenas at freescale.com>
> 
> Freescale's SEC block has built-in Data Encryption
> Key(DEK) Blob Protocol which provides a method for protecting a DEK for non-
> secure memory storage.
> SEC block protects data in a data structure called a Secret Key Blob, which
> provides both confidentiality and integrity protection.
> Every time the blob encapsulation is executed, a SHA-256 key is randomly
> generated to encrypt the DEK.
> This key is itself encrypted with the OTP Secret key from SoC. The ending
> blob consists of the encrypted
> SHA-256 key, the encrypted DEK, and a 16-bit MAC.
> 
> During decapsulation, the reverse process is performed to get back the
> original DEK. A caveat to the blob decapsulation process,  is that the DEK is
> decrypted in secure-memory and can only be read by FSL SEC HW.
> The DEK is used to decrypt data during encrypted boot.
> 
> Commands added
> --------------
>   dek_blob - encapsulating DEK as a cryptgraphic blob
> 
> Commands Syntax
> ---------------
>   dek_blob src dst len
> 
>     Encapsulate and create blob of a len-bits DEK at
>     address src and store the result at address dst.
> 
> Signed-off-by: Raul Cardenas <Ulises.Cardenas at freescale.com>
> Signed-off-by: Nitin Garg <nitin.garg at freescale.com>
> ---
> 
>  arch/arm/imx-common/Makefile             |    1 +
>  arch/arm/imx-common/cmd_dek.c            |   89 +++++++++++++++++++
>  arch/arm/imx-common/timer.c              |   17 ++++
>  arch/arm/include/asm/arch-mx6/imx-regs.h |    4 +
>  doc/README.mxc_hab                       |   48 ++++++++++
>  drivers/crypto/fsl/Makefile              |    2 +-
>  drivers/crypto/fsl/desc.h                |   15 ++++
>  drivers/crypto/fsl/fsl_blob.c            |   50 +++++++++++
>  drivers/crypto/fsl/jobdesc.c             |  142
> +++++++++++++++++++++++++++++-
>  drivers/crypto/fsl/jobdesc.h             |    5 ++
>  drivers/crypto/fsl/jr.c                  |   24 ++++-
>  include/fsl_sec.h                        |   60 +++++++++++++
>  12 files changed, 451 insertions(+), 6 deletions(-)  create mode 100644
> arch/arm/imx-common/cmd_dek.c
> 
> diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
> index 25a9d4c..606482f 100644
> --- a/arch/arm/imx-common/Makefile
> +++ b/arch/arm/imx-common/Makefile
> @@ -24,6 +24,7 @@ obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o  endif
>  obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
>  obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
> +obj-$(CONFIG_CMD_DEKBLOB) += cmd_dek.o
> 
>  quiet_cmd_cpp_cfg = CFGS    $@
>        cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $< diff --git
> a/arch/arm/imx-common/cmd_dek.c b/arch/arm/imx-common/cmd_dek.c new file mode
> 100644 index 0000000..e3748d2
> --- /dev/null
> +++ b/arch/arm/imx-common/cmd_dek.c
> @@ -0,0 +1,89 @@
> +/*
> + * Command for encapsulating DEK blob
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <command.h>
> +#include <environment.h>
> +#include <malloc.h>
> +#include <asm/byteorder.h>
> +#include <linux/compiler.h>
> +#include <fsl_sec.h>
> +#include <asm/arch/clock.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/**
> +* blob_dek() - Encapsulate the DEK as a blob using CAM's Key
> +* @src: - Address of data to be encapsulated
> +* @dst: - Address of data to be encapsulated
> +* @len: - Size of data to be encapsulated
> +*
> +* Returns zero on success,and negative on error.
> +*/
> +__weak int blob_encap_dek(u8 *src, u8 *dst, u32 len) {
This should not be a weak function. 
> +	int ret = 0;
> +	u32 jr_size = 4;
> +
> +	u32 out_jr_size = sec_in32(CONFIG_SYS_FSL_JR0_ADDR + 0x102c);
> +	if (out_jr_size != jr_size) {
> +		hab_caam_clock_enable(1);
> +		sec_init();
> +	}
> +
> +	if (!((len == 128)|(len == 192)|(len == 256))) {
> +		debug("Invalid DEK size. Valid sizes are 128, 192 and 256b\n");
> +		return -1;
> +	}
> +
> +	len /= 8;
> +	ret = blob_dek(src, dst, len);
> +
> +	return ret;
> +}
> +
> +/**
> + * do_dek_blob() - Handle the "dek_blob" command-line command
> + * @cmdtp:  Command data struct pointer
> + * @flag:   Command flag
> + * @argc:   Command-line argument count
> + * @argv:   Array of command-line arguments
> + *
> + * Returns zero on success, CMD_RET_USAGE in case of misuse and
> +negative
> + * on error.
> + */
> +static int do_dek_blob(cmd_tbl_t *cmdtp, int flag, int argc, char
> +*const argv[]) {
> +	uint32_t src_addr, dst_addr, len;
> +	uint8_t *src_ptr, *dst_ptr;
> +	int ret = 0;
> +
> +	if (argc != 4)
> +		return CMD_RET_USAGE;
> +
> +	src_addr = simple_strtoul(argv[1], NULL, 16);
> +	dst_addr = simple_strtoul(argv[2], NULL, 16);
> +	len = simple_strtoul(argv[3], NULL, 10);
> +
> +	src_ptr = (uint8_t *)src_addr;
> +	dst_ptr = (uint8_t *)dst_addr;
> +
> +	ret = blob_encap_dek(src_ptr, dst_ptr, len);
> +
> +	return ret;
> +}
> +
> +/***************************************************/
> +static char dek_blob_help_text[] =
> +	"src dst len            - Encapsulate and create blob of data\n"
> +	"                         $len bits long at address $src and\n"
> +	"                         store the result at address $dst.\n";
> +
> +U_BOOT_CMD(
> +	dek_blob, 4, 1, do_dek_blob,
> +	"Data Encryption Key blob encapsulation",
> +	dek_blob_help_text
> +);
> diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c index
> 65ef60b..e522990 100644
> --- a/arch/arm/imx-common/timer.c
> +++ b/arch/arm/imx-common/timer.c
> @@ -176,3 +176,20 @@ ulong get_tbclk(void)  {
>  	return gpt_get_clk();
>  }
> +
> +/*
> + * This function is intended for SHORT delays only.
> + * It will overflow at around 10 seconds @ 400MHz,
> + * or 20 seconds @ 200MHz.
> + */
> +unsigned long usec2ticks(unsigned long usec) {
> +	ulong ticks;
> +
> +	if (usec < 1000)
> +		ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
> +	else
> +		ticks = ((usec / 10) * (get_tbclk() / 100000));
> +
> +	return ticks;
> +}
> diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h
> b/arch/arm/include/asm/arch-mx6/imx-regs.h
> index c968600..8642021 100644
> --- a/arch/arm/include/asm/arch-mx6/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
> @@ -215,6 +215,10 @@
>  #define AIPS2_OFF_BASE_ADDR         (ATZ2_BASE_ADDR + 0x80000)
>  #define CAAM_BASE_ADDR              (ATZ2_BASE_ADDR)
>  #define ARM_BASE_ADDR		    (ATZ2_BASE_ADDR + 0x40000)
> +
> +#define CONFIG_SYS_FSL_SEC_ADDR     (CAAM_BASE_ADDR)
> +#define CONFIG_SYS_FSL_JR0_ADDR     (CAAM_BASE_ADDR + 0x1000)
> +
>  #define USB_PL301_BASE_ADDR         (AIPS2_OFF_BASE_ADDR + 0x0000)
>  #define USB_BASE_ADDR               (AIPS2_OFF_BASE_ADDR + 0x4000)
> 
> diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab index 43e64a2..46ed0df
> 100644
> --- a/doc/README.mxc_hab
> +++ b/doc/README.mxc_hab
> @@ -46,3 +46,51 @@ cat u-boot.imx U-Boot_CSF_pad.bin > u-boot-signed.imx
> 
>  NOTE: U-Boot_CSF.bin needs to be padded to the value specified in  the
> imximage.cfg file.
> +
> +Setup U-Boot Image for Encrypted Boot
> +-------------------------------------
> +An authenticated  U-boot image  is used as starting point for Encrypted
> +Boot. The image is encrypted by Freescale's Code Signing Tool (CST).
> +The CST replaces only the image data of u-boot.imx with the encrypted
> +data. The Initial Vector Table, DCD, and Boot data, remains in
> +plaintext.
> +
> +The image data  is encrypted with a Encryption Key (DEK).
> +Therefore, this key is needed to decrypt the data during the booting
> +process. The DEK is protected by wrapping it in a Blob, which needs to
> +be appended to the U-boot image and specified in the CSF file.
> +
> +The DEK blob is generated by an authenticated U-boot image with the
> +dek_blob cmd enabled. The image used for DEK blob generation needs to
> +have the following configurations enabled:
> +
> +CONFIG_SECURE_BOOT
> +CONFIG_SYS_FSL_SEC_COMPAT    4 /* HAB version */
> +CONFIG_FSL_CAAM
> +CONFIG_CMD_DEKBLOB
> +
> +Note: The encrypted boot feature is only supported by HABv4 or greater.
> +
> +The dek_blob command then can be used to generate the DEK blob of a DEK
> +previously loaded in memory. The command is used as follows:
> +
> +dek_blob <DEK address>  <Output Address> <Key Size in Bits>
> +example:  dek_blob 0x10800000 0x10801000 192
> +
> +The resulting DEK blob then is used to construct the encrypted U-boot
> +image. Note that the blob needs to be transfered back to the host.Then
> +the following commands are used to construct the final image.
> +
> +objcopy -I binary -O binary --pad-to 0x2000 --gap-fill=0x00 \
> +    U-Boot_CSF.bin U-Boot_CSF_pad.bin
> +cat u-boot.imx U-Boot_CSF_pad.bin > u-boot-signed.imx objcopy -I binary
> +-O binary --pad-to <blob_dst> --gap-fill=0x00 \
> +    u-boot-signed.imx u-boot-signed-pad.bin cat u-boot-signed-pad.imx
> +DEK_blob.bin > u-boot-encrypted.imx
> +
> +    NOTE: u-boot-signed.bin needs to be padded to the value
> +    equivalent to the address in which the DEK blob is specified
> +    in the CSF.
> diff --git a/drivers/crypto/fsl/Makefile b/drivers/crypto/fsl/Makefile index
> c0cf642..4aa91e4 100644
> --- a/drivers/crypto/fsl/Makefile
> +++ b/drivers/crypto/fsl/Makefile
> @@ -8,5 +8,5 @@
> 
>  obj-y += sec.o
>  obj-$(CONFIG_FSL_CAAM) += jr.o fsl_hash.o jobdesc.o error.o
> -obj-$(CONFIG_CMD_BLOB) += fsl_blob.o
> +obj-$(CONFIG_CMD_BLOB)$(CONFIG_CMD_DEKBLOB) += fsl_blob.o
>  obj-$(CONFIG_RSA_FREESCALE_EXP) += fsl_rsa.o diff --git
> a/drivers/crypto/fsl/desc.h b/drivers/crypto/fsl/desc.h index
> 504f2b0..bb82734 100644
> --- a/drivers/crypto/fsl/desc.h
> +++ b/drivers/crypto/fsl/desc.h
> @@ -12,11 +12,18 @@
>  #ifndef DESC_H
>  #define DESC_H
> 
> +#define KEY_BLOB_SIZE		32
> +#define MAC_SIZE		16
> +
>  /* Max size of any CAAM descriptor in 32-bit words, inclusive of header */
>  #define MAX_CAAM_DESCSIZE	64
> 
> +/* Size of DEK Blob  descriptor, inclusive of header */
> +#define DEK_BLOB_DESCSIZE	9
> +
>  /* Block size of any entity covered/uncovered with a KEK/TKEK */
>  #define KEK_BLOCKSIZE		16
> +
>  /*
>   * Supported descriptor command types as they show up
>   * inside a descriptor command word.
> @@ -273,6 +280,13 @@
>  #define LDLEN_SET_OFIFO_OFFSET_MASK	(3 << LDLEN_SET_OFIFO_OFFSET_SHIFT)
> 
>  /*
> + * AAD Definitions
> + */
> +#define AES_KEY_SHIFT		8
> +#define LD_CCM_MODE		(0x66)
> +#define KEY_AES_SRC		(0x55 << AES_KEY_SHIFT)
> +
> +/*
>   * FIFO_LOAD/FIFO_STORE/SEQ_FIFO_LOAD/SEQ_FIFO_STORE
>   * Command Constructs
>   */
> @@ -418,6 +432,7 @@
>  #define OP_PCLID_MASK		(0xff << 16)
> 
>  /* Assuming OP_TYPE = OP_TYPE_UNI_PROTOCOL */
> +#define OP_PCLID_SECMEM		(0x08)
>  #define OP_PCLID_BLOB		(0x0d << OP_PCLID_SHIFT)
>  #define OP_PCLID_SECRETKEY	(0x11 << OP_PCLID_SHIFT)
>  #define OP_PCLID_PUBLICKEYPAIR	(0x14 << OP_PCLID_SHIFT)
> diff --git a/drivers/crypto/fsl/fsl_blob.c b/drivers/crypto/fsl/fsl_blob.c
> index bc01075..f9dc85a 100644
> --- a/drivers/crypto/fsl/fsl_blob.c
> +++ b/drivers/crypto/fsl/fsl_blob.c
> @@ -7,6 +7,7 @@
> 
>  #include <common.h>
>  #include <malloc.h>
> +#include <fsl_sec.h>
>  #include "jobdesc.h"
>  #include "desc.h"
>  #include "jr.h"
> @@ -59,3 +60,52 @@ int blob_encrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len)
>  	free(desc);
>  	return ret;
>  }
> +
> +#ifdef CONFIG_CMD_DEKBLOB
> +int blob_dek(u8 *src, u8 *dst, u8 len)
> +{
> +	int ret, size, i = 0;
> +	u32 *desc;
> +
> +	int out_sz =  WRP_HDR_SIZE + len + KEY_BLOB_SIZE + MAC_SIZE;
> +
> +	puts("\nEncapsulating provided DEK to form blob\n");
> +	desc = memalign(ARCH_DMA_MINALIGN,
> +			sizeof(uint32_t) * DEK_BLOB_DESCSIZE);
> +	if (!desc) {
> +		debug("Not enough memory for descriptor allocation\n");
> +		return -1;
> +	}
> +
> +	ret = inline_cnstr_jobdesc_blob_dek(desc, src, dst, len);
> +	if (ret) {
> +		debug("Error in Job Descriptor Construction:  %d\n", ret);
> +	} else {
> +		size = roundup(sizeof(uint32_t) * DEK_BLOB_DESCSIZE,
> +			      ARCH_DMA_MINALIGN);
> +		flush_dcache_range((unsigned long)desc,
> +				   (unsigned long)desc + size);
> +		size = roundup(sizeof(uint8_t) * out_sz, ARCH_DMA_MINALIGN);
> +		flush_dcache_range((unsigned long)dst,
> +				   (unsigned long)dst + size);
> +
> +		ret = run_descriptor_jr(desc);
> +	}
> +
> +	if (ret)
> +		debug("Error in Encapsulation %d\n", ret);
> +
> +	size = roundup(out_sz, ARCH_DMA_MINALIGN);
> +	invalidate_dcache_range((unsigned long)dst, (unsigned long)dst+size);
> +
> +	/* Print DEK Blob */
> +	puts("DEK Blob\n");
> +	for (i = 0; i < out_sz; i++)
> +		printf("%02X", ((uint8_t *)dst)[i]);
> +
> +	puts("\n\n");
> +
> +	free(desc);
> +	return ret;
> +}
> +#endif
> diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c
> index cc0dced..4dc73ae 100644
> --- a/drivers/crypto/fsl/jobdesc.c
> +++ b/drivers/crypto/fsl/jobdesc.c
> @@ -9,12 +9,150 @@
>   */
> 
>  #include <common.h>
> +#include <fsl_sec.h>
>  #include "desc_constr.h"
>  #include "jobdesc.h"
>  #include "rsa_caam.h"
> 
> -#define KEY_BLOB_SIZE			32
> -#define MAC_SIZE			16
> +#ifdef CONFIG_MX6
> +/*!
> + * Secure memory run command.
> + *
> + * @param   sec_mem_cmd  Secure memory command register
> + * @return  cmd_status  Secure memory command status register  */
> +uint32_t secmem_set_cmd(uint32_t sec_mem_cmd) {
> +	uint32_t temp_reg;
> +
> +	sec_out32(CAAM_SMCJR0, sec_mem_cmd);
> +
> +	do {
> +		temp_reg = sec_in32(CAAM_SMCSJR0);
> +	} while (temp_reg & CMD_COMPLETE);
> +
> +	return temp_reg;
> +}
> +
> +/*!
> + * CAAM page allocation.
> + *
> + * @param   page  Number of the page to allocate.
> + * @param   partition  Number of the partition to allocate.
> + */
> +uint32_t caam_page_alloc(uint8_t page_num, uint8_t partition_num) {
> +	uint32_t temp_reg;
> +
> +	/*
> +	 * De-Allocate partition_num if already allocated to ARM core
> +	 */
> +	if (sec_in32(CAAM_SMPO_0) & PARTITION_OWNER(partition_num)) {
> +		temp_reg = secmem_set_cmd(PARTITION(partition_num) |
> +						CMD_PART_DEALLOC);
> +		if (temp_reg & SMCSJR_AERR) {
> +			printf("Error: De-allocation status 0x%X\n", temp_reg);
> +			return ERROR_IN_PAGE_ALLOC;
> +		}
> +	}
> +
> +	/* set the access rights to allow full access */
> +	sec_out32(CAAM_SMAG1JR0(partition_num), 0xF);
> +	sec_out32(CAAM_SMAG2JR0(partition_num), 0xF);
> +	sec_out32(CAAM_SMAPJR0(partition_num), 0xFF);
> +
> +	/* Now need to allocate partition_num of secure RAM. */
> +	/* De-Allocate page_num by starting with a page inquiry command */
> +	temp_reg = secmem_set_cmd(PAGE(page_num) | CMD_INQUIRY);
> +
> +	/* if the page is owned, de-allocate it */
> +	if ((temp_reg & SMCSJR_PO) == PAGE_OWNED) {
> +		temp_reg = secmem_set_cmd(PAGE(page_num) | CMD_PAGE_DEALLOC);
> +		if (temp_reg & SMCSJR_AERR) {
> +			printf("Error: Allocation status 0x%X\n", temp_reg);
> +			return ERROR_IN_PAGE_ALLOC;
> +		}
> +	}
> +
> +	/* Allocate page_num to partition_num */
> +	temp_reg = secmem_set_cmd(PAGE(page_num) | PARTITION(partition_num)
> +						| CMD_PAGE_ALLOC);
> +	if (temp_reg & SMCSJR_AERR) {
> +		printf("Error: Allocation status 0x%X\n", temp_reg);
> +		return ERROR_IN_PAGE_ALLOC;
> +	}
> +	/* page inquiry command to ensure that the page was allocated */
> +	temp_reg = secmem_set_cmd(PAGE(page_num) | CMD_INQUIRY);
> +
> +	/* if the page is not owned => problem */
> +	if ((temp_reg & SMCSJR_PO) != PAGE_OWNED) {
> +		printf("Allocation of page %d in partition %d failed 0x%X\n",
> +		       temp_reg, page_num, partition_num);
> +
> +		return ERROR_IN_PAGE_ALLOC;
> +	}
> +
> +	return 0;
> +}
> +
> +uint32_t inline_cnstr_jobdesc_blob_dek(uint32_t *desc, uint8_t *plain_txt,
> +				       uint8_t *dek_blob, uint32_t in_sz) {
> +	uint32_t ret = 0;
> +	u32 aad_w1, aad_w2;
> +	/* output blob will have 32 bytes key blob in beginning and
> +	 * 16 byte HMAC identifier at end of data blob */
> +	uint32_t out_sz = in_sz + KEY_BLOB_SIZE + MAC_SIZE;
> +	/* Setting HDR for blob */
> +	uint8_t wrapped_key_hdr[8] = {HDR_TAG, 0x00, WRP_HDR_SIZE + out_sz,
> +				     HDR_PAR, HAB_MOD, HAB_ALG, in_sz, HAB_FLG};
> +
> +	/* initialize the blob array */
> +	memset(dek_blob, 0, out_sz + 8);
> +	/* Copy the header into the DEK blob buffer */
> +	memcpy((uint32_t *)dek_blob, wrapped_key_hdr,
> +sizeof(wrapped_key_hdr));
> +
> +	/* allocating secure memory */
> +	ret = caam_page_alloc(PAGE_1, PARTITION_1);
> +	if (ret)
> +		return ret;
> +
> +	/* Write DEK to secure memory */
> +	memcpy((uint32_t *)SEC_MEM_PAGE1, (uint32_t *)plain_txt, in_sz);
> +
> +	unsigned long start = (unsigned long)SEC_MEM_PAGE1 &
> +				~(ARCH_DMA_MINALIGN - 1);
> +	unsigned long end = ALIGN(start + 0x1000, ARCH_DMA_MINALIGN);
> +	flush_dcache_range(start, end);
> +
> +	/* Now configure the access rights of the partition */
> +	sec_out32(CAAM_SMAG1JR0(PARTITION_1), KS_G1); /* set group 1 */
> +	sec_out32(CAAM_SMAG2JR0(PARTITION_1), 0);     /* clear group 2 */
> +	sec_out32(CAAM_SMAPJR0(PARTITION_1), PERM);   /* set perm & locks */
> +
> +	/* construct aad for AES */
> +	aad_w1 = (in_sz << OP_ALG_ALGSEL_SHIFT) | KEY_AES_SRC | LD_CCM_MODE;
> +	aad_w2 = 0x0;
> +
> +	init_job_desc(desc, 0);
> +
> +	append_cmd(desc, CMD_LOAD | CLASS_2 | KEY_IMM | KEY_ENC |
> +				(0x0c << LDST_OFFSET_SHIFT) | 0x08);
> +
> +	append_u32(desc, aad_w1);
> +
> +	append_u32(desc, aad_w2);
> +
> +	append_cmd_ptr(desc, (dma_addr_t)SEC_MEM_PAGE1, in_sz,
> +CMD_SEQ_IN_PTR);
> +
> +	append_cmd_ptr(desc, (dma_addr_t)dek_blob + 8, out_sz,
> +CMD_SEQ_OUT_PTR);
> +
> +	append_operation(desc, OP_TYPE_ENCAP_PROTOCOL | OP_PCLID_BLOB |
> +						OP_PCLID_SECMEM);
> +
> +	return ret;
> +}
> +#endif
> 
>  void inline_cnstr_jobdesc_hash(uint32_t *desc,
>  			  const uint8_t *msg, uint32_t msgsz, uint8_t *digest,
> diff --git a/drivers/crypto/fsl/jobdesc.h b/drivers/crypto/fsl/jobdesc.h
> index 84b3edd..d20c18c 100644
> --- a/drivers/crypto/fsl/jobdesc.h
> +++ b/drivers/crypto/fsl/jobdesc.h
> @@ -14,6 +14,11 @@
> 
>  #define KEY_IDNFR_SZ_BYTES		16
> 
> +#ifdef CONFIG_CMD_DEKBLOB
> +uint32_t inline_cnstr_jobdesc_blob_dek(uint32_t *desc, uint8_t *plain_txt,
> +				uint8_t *enc_blob, uint32_t in_sz); #endif
> +
>  void inline_cnstr_jobdesc_hash(uint32_t *desc,
>  			  const uint8_t *msg, uint32_t msgsz, uint8_t *digest,
>  			  u32 alg_type, uint32_t alg_size, int sg_tbl); diff --git
> a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c index f9d4938..8b76c1b
> 100644
> --- a/drivers/crypto/fsl/jr.c
> +++ b/drivers/crypto/fsl/jr.c
> @@ -90,11 +90,13 @@ static int jr_init(void)
>  	jr.liodn = DEFAULT_JR_LIODN;
>  #endif
>  	jr.size = JR_SIZE;
> -	jr.input_ring = (dma_addr_t *)malloc(JR_SIZE * sizeof(dma_addr_t));
> +	jr.input_ring = (dma_addr_t *)memalign(ARCH_DMA_MINALIGN,
> +				JR_SIZE * sizeof(dma_addr_t));
>  	if (!jr.input_ring)
>  		return -1;
>  	jr.output_ring =
> -	    (struct op_ring *)malloc(JR_SIZE * sizeof(struct op_ring));
> +	    (struct op_ring *)memalign(ARCH_DMA_MINALIGN,
> +				JR_SIZE * sizeof(struct op_ring));
>  	if (!jr.output_ring)
>  		return -1;
> 
> @@ -163,13 +165,22 @@ static int jr_enqueue(uint32_t *desc_addr,
>  	    CIRC_SPACE(jr.head, jr.tail, jr.size) <= 0)
>  		return -1;
> 
> -	jr.input_ring[head] = desc_phys_addr;
>  	jr.info[head].desc_phys_addr = desc_phys_addr;
>  	jr.info[head].desc_addr = (uint32_t)desc_addr;
>  	jr.info[head].callback = (void *)callback;
>  	jr.info[head].arg = arg;
>  	jr.info[head].op_done = 0;
> 
> +	unsigned long start = (unsigned long)jr.info & ~(ARCH_DMA_MINALIGN -
> 1);
> +	unsigned long end = ALIGN(start + sizeof(struct jr_info) * JR_SIZE ,
> +					ARCH_DMA_MINALIGN);
> +	flush_dcache_range(start, end);
> +
> +	jr.input_ring[head] = desc_phys_addr;
> +	start = (unsigned long)jr.input_ring & ~(ARCH_DMA_MINALIGN - 1);
> +	end = ALIGN(start + sizeof(dma_addr_t)*JR_SIZE , ARCH_DMA_MINALIGN);
> +	flush_dcache_range(start, end);
Here the address passed to the 
> +
>  	jr.head = (head + 1) & (jr.size - 1);
> 
>  	sec_out32(&regs->irja, 1);
> @@ -187,6 +198,13 @@ static int jr_dequeue(void)
>  	void *arg = NULL;
> 
>  	while (sec_in32(&regs->orsf) && CIRC_CNT(jr.head, jr.tail, jr.size)) {
> +		unsigned long start = (unsigned long)jr.output_ring &
> +					~(ARCH_DMA_MINALIGN - 1);
> +		unsigned long end = ALIGN(start +
> +					  sizeof(struct op_ring)*JR_SIZE,
> +					  ARCH_DMA_MINALIGN);
> +		invalidate_dcache_range(start, end);
> +
>  		found = 0;
> 
>  		dma_addr_t op_desc = jr.output_ring[jr.tail].desc; diff --git
> a/include/fsl_sec.h b/include/fsl_sec.h index aa850a3..95fbb6b 100644
> --- a/include/fsl_sec.h
> +++ b/include/fsl_sec.h
> @@ -11,6 +11,13 @@
>  #include <common.h>
>  #include <asm/io.h>
> 
> +#ifdef CONFIG_ARM
> +#define sec_in32(a)       __raw_readl(a)
> +#define sec_out32(a, v)   __raw_writel(v, a)
> +#define sec_in16(a)       __raw_readw(a)
> +#define sec_clrbits32     clrbits_le32
> +#define sec_setbits32     setbits_le32
> +#elif CONFIG_PPC
>  #ifdef CONFIG_SYS_FSL_SEC_LE
>  #define sec_in32(a)       in_le32(a)
>  #define sec_out32(a, v)   out_le32(a, v)
> @@ -26,6 +33,7 @@
>  #else
>  #error Neither CONFIG_SYS_FSL_SEC_LE nor CONFIG_SYS_FSL_SEC_BE is defined
> #endif
> +#endif      /* ARCHITECURE */
> 
>  /* Security Engine Block (MS = Most Sig., LS = Least Sig.) */  #if
> CONFIG_SYS_FSL_SEC_COMPAT >= 4 @@ -175,7 +183,59 @@ struct jr_regs {
>  	u32 jrcr;
>  };
> 
> +#ifdef CONFIG_MX6
> +
> +#define SMCSJR_PO		(3 << 6)
> +#define SMCSJR_AERR		(3 << 12)
> +#define SMCSJR_CERR		(3 << 14)
> +#define CAAM_SMPO_0		CONFIG_SYS_FSL_SEC_ADDR + 0x1FBC
> +#define CAAM_SMCJR0		CONFIG_SYS_FSL_SEC_ADDR + 0x10f4
> +#define CAAM_SMCSJR0		CONFIG_SYS_FSL_SEC_ADDR + 0x10fc
> +#define CAAM_SMAPJR0(y)		(CONFIG_SYS_FSL_SEC_ADDR + 0x1104 + y*16)
> +#define CAAM_SMAG2JR0(y)	(CONFIG_SYS_FSL_SEC_ADDR + 0x1108 + y*16)
> +#define CAAM_SMAG1JR0(y)	(CONFIG_SYS_FSL_SEC_ADDR + 0x110C + y*16)
> +
> +#define ERROR_IN_PAGE_ALLOC	(1)
> +#define CMD_PAGE_ALLOC		0x1
> +#define CMD_PAGE_DEALLOC	0x2
> +#define CMD_PART_DEALLOC	0x3
> +#define CMD_INQUIRY		0x5
> +#define CMD_COMPLETE		(3 << 14)
> +#define PAGE_AVAILABLE		0
> +#define PAGE_OWNED		(3 << 6)
> +#define PAGE(x)			(x << 16)
> +#define PARTITION(x)		(x << 8)
> +#define PARTITION_OWNER(x)	(0x3 << (x*2))
> +
> +/* 4kbyte pages */
> +#define SEC_MEM_PAGE0		CAAM_ARB_BASE_ADDR
> +#define SEC_MEM_PAGE1		(CAAM_ARB_BASE_ADDR + 0x1000)
> +#define SEC_MEM_PAGE2		(CAAM_ARB_BASE_ADDR + 0x2000)
> +#define SEC_MEM_PAGE3		(CAAM_ARB_BASE_ADDR + 0x3000)
> +
> +#define JR_MID			2               /* Matches ROM configuration
> */
> +#define KS_G1			(1 << JR_MID)   /* CAAM only */
> +#define PERM			0x0000B008      /* Clear on release, lock
> SMAP
> +						 * lock SMAG group 1 Blob */
> +
> +/* HAB WRAPPED KEY header */
> +#define WRP_HDR_SIZE		0x08
> +#define HDR_TAG			0x81
> +#define HDR_PAR			0x41
> +/* HAB WRAPPED KEY Data */
> +#define HAB_MOD			0x66
> +#define HAB_ALG			0x55
> +#define HAB_FLG			0x00
> +
> +#define PARTITION_1		1
> +#define PAGE_1			1
> +
> +#endif
> +
>  int sec_init(void);
> +
> +int blob_dek(u8 *src, u8 *dst, u8 len);
> +
>  #endif
> 
>  #endif /* __FSL_SEC_H */
> --
> 1.7.9.5
Regards,
Ruchika



More information about the U-Boot mailing list