[U-Boot] [PATCH 3/4] mx6: clock: Modify GPMI clock to support mx6sx

[Stefano Babic]

Hi Ye.Li,

On 11/02/2015 04:14, Li Ye-B37916 wrote:

>>
> I feel you misunderstand the patch.

Thanks for clarifications.

> On i.MX6sx, the QSPI2 and GPMI shares the same clock root of QSPI2. So you can see the register bits are
> named with "MXC_CCM_CS2CDR_QSPI2_xxx". Actually, not only the name, there is a little different in the CS2CDR register bits layout.  The patch is used to fix the gap. 
> 
> Also the the GPMI pins are multiplexed with QSPI2 pins, so either NAND or QSPI2 can work,  there is no conflict.

Ok, understood - then it is fine with me.

Best regards,
Stefano Babic



-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================