[U-Boot] netconsole: USB Ethernet connection dropping with ping or tftpboot

[Stephen Warren]

On 02/05/2015 03:10 PM, Jörg Krause wrote:
> On Do, 2015-02-05 at 08:33 -0700, Stephen Warren wrote:
>> On 02/05/2015 04:21 AM, Jörg Krause wrote:
...
>>> This reminded me about an issue I had some months ago:
>>> http://lists.denx.de/pipermail/u-boot/2014-July/182885.html
>>>
>>> I enabled debug output in arch/arm/cpu/arm926ejs/cache.c and I get
>>> error:
>>> => tftp u-boot.sb
>>> using ci_udc, OUT ep- IN ep- STATUS ep-
>>> CACHE: Misaligned operation at range [43f7b010, 43f7b070]
>>>
>>> I removed the flush_cache() call in cmd_net.c:netboot_common() as
>>> suggested by Marek in the thread. But the error message is still there.
>>
>> Perhaps make flush_cache() a macro that also passes in the file/line
>> number where it's called from, and print those out along with he
>> "misaligned operation" error message?
>>
>> (or find some other way to perform a stack dump from within that function).
>
> I've added in each function in ci_udc a printf statement before a cache
> function is called, eg:
>
>          static void ci_flush_qh(int ep_num)
>          {
>          	[..]
>          	printf("CACHE: flush_dcache_range %s %d
>          \n",__FUNCTION__,__LINE__);
>          	flush_dcache_range(start, end);
>          }
>
> I've also looked at all calling functions of flush_cache or
> flush_dcache_range, but I think there is nothing of relevance.
>
> This is a snippet of the output:
>
...
>          CACHE: flush_dcache_range ci_bounce 356
>          CACHE: Misaligned operation at range [43f7b010, 43f7b070]
>          timeout sending packets to usb ethernet
>          ping failed; host 10.0.0.1 is not alive

Which git commit did you build, and which board?

I'm curious what values you have for ARCH_DMA_MINALIGN and 
CONFIG_SYS_CACHELINE_SIZE.

Are you sure flush_dcache_range() is the code printing the alignment 
error, not e.g. invalidate_dcache_range()?

The reason I ask most of these questions is that line 356 mentioned in 
your debug spew is in function ci_debounce() in the code I have; no 
doubt I have a different git commit than you have checked out, and the 
debug printfs you added changed the line numbers too.

About the only thing I can think of is that:

a) You're not using an up-to-date ci_udc.c; IIRC I fixed quite a few 
cache issues when I reworked it a while back.

b) In ci_bounce(), the bounce buffer is only allocated if the 
user-buffer is already aligned, and if a large-enough bounce buffer 
wasn't previously allocated. If ci_req->b_buf was uninitialized it could 
be non-zero (thus preventing the expected aligned allocation) yet not 
actually aligned enough.

c) Perhaps ARCH_DMA_MINALIGN or CONFIG_SYS_CACHELINE_SIZE aren't correct 
or are inconsistent.

Ah. I note that check_cache_range() in either arch/arm/cpu/arm1136/cpu.c 
or arch/arm/cpu/arm926ejs/cache.c uses CONFIG_SYS_CACHELINE_SIZE to 
check for alignment, whereas ci_udc.c uses ARCH_DMA_MINALIGN. 
Inconsistency between those two could be at fault.