[U-Boot] [PATCH v3] fastboot: add support for reboot-bootloader command

Alexey Firago alexey_firago at mentor.com
Wed Feb 25 15:10:47 CET 2015


The "fastboot reboot-bootloader" command is defined to
re-enter into fastboot mode after rebooting into
bootloader. This command is usually used after updating
bootloader via fastboot.

This commit implements only a generic side of the
command - setting of the reset flag and then resetting.
Setting of the reset flag is implemented using __weak
fb_set_reboot_flag() function. The actual setting and
checking of the reset flag should be implemented by
a boot script and/or board/SoC specific code.

Signed-off-by: Alexey Firago <alexey_firago at mentor.com>
---

Changes in v3:
- return -ENOSYS from default fb_set_reboot_flag()

Changes in v2:
- return error in default fb_set_reboot_flag()

 drivers/usb/gadget/f_fastboot.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
index 310175a..a000c25 100644
--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -122,6 +122,7 @@ static struct usb_gadget_strings *fastboot_strings[] = {
 };
 
 static void rx_handler_command(struct usb_ep *ep, struct usb_request *req);
+static int strcmp_l1(const char *s1, const char *s2);
 
 static void fastboot_complete(struct usb_ep *ep, struct usb_request *req)
 {
@@ -317,8 +318,20 @@ static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
 	do_reset(NULL, 0, 0, NULL);
 }
 
+int __weak fb_set_reboot_flag(void)
+{
+	return -ENOSYS;
+}
+
 static void cb_reboot(struct usb_ep *ep, struct usb_request *req)
 {
+	char *cmd = req->buf;
+	if (!strcmp_l1("reboot-bootloader", cmd)) {
+		if (fb_set_reboot_flag()) {
+			fastboot_tx_write_str("FAILCannot set reboot flag");
+			return;
+		}
+	}
 	fastboot_func->in_req->complete = compl_do_reset;
 	fastboot_tx_write_str("OKAY");
 }
-- 
1.9.1



More information about the U-Boot mailing list