[U-Boot] [PATCH 2/3] arm: relocation: clear .bss section with arch memset if defined

[Przemyslaw Marczak]

Hello Tom,

On 02/12/2015 04:37 PM, Tom Rini wrote:
> On Sun, Feb 01, 2015 at 03:38:42AM +0100, Albert ARIBAUD wrote:
>> Hello Przemyslaw,
>>
>> On Wed, 28 Jan 2015 13:55:42 +0100, Przemyslaw Marczak
>> <p.marczak at samsung.com> wrote:
>>> For ARM architecture, enable the CONFIG_USE_ARCH_MEMSET/MEMCPY,
>>> will highly increase the memset/memcpy performance. This is able
>>> thanks to the ARM multiple register instructions.
>>>
>>> Unfortunatelly the relocation is done without the cache enabled,
>>> so it takes some time, but zeroing the BSS memory takes much more
>>> longer, especially for the configs with big static buffers.
>>>
>>> A quick test confirms, that the boot time improvement after using
>>> the arch memcpy for relocation has no significant meaning.
>>> The same test confirms that enable the memset for zeroing BSS,
>>> reduces the boot time.
>>>
>>> So this patch enables the arch memset for zeroing the BSS after
>>> the relocation process. For ARM boards, this can be enabled
>>> in board configs by defining: 'CONFIG_USE_ARCH_MEMSET'.
>>
>> Since the issue is that zeroing is done one word at a time, could we
>> not simply clear r3 as well as r2 (possibly even r4 and r5 too) and do
>> a double (possibly quadruple) write loop? That would avoid calling a
>> libc routine from the almost sole file in U-Boot where a C environment
>> is not necessarily granted.
>
> I want to jump up here again.  Note that the arch memset/memcpy routines
> are in asm and I don't belive require a C environment.  Why don't we
> simply use the asm versions for everyone and backport whatever we need
> from the kernel to re-sync there as it's not a choice there and it's a
> performance win too?
>

Right, for ARM the mentioned routines doesn't require C env. But if we 
could achieve some improvement in this place, then maybe it has sense to 
add some new code just for bss.

I will try to combine and make some timing tests on Monday.

Best regards,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com