[U-Boot] [PATCH 3/4] mx6: clock: Modify GPMI clock to support mx6sx
Stefano Babic
sbabic at denx.de
Tue Feb 10 11:26:40 CET 2015
Hi Ye,
On 12/01/2015 09:46, Ye.Li wrote:
> On mx6sx, the CCM register bits for GPMI are different as other
> mx6 platforms. Modify the GPMI clock function to support mx6sx.
>
> Signed-off-by: Ye.Li <B37916 at freescale.com>
> ---
> arch/arm/cpu/armv7/mx6/clock.c | 12 ++++++++++++
> 1 files changed, 12 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
> index fd57f22..ce7f0f7 100644
> --- a/arch/arm/cpu/armv7/mx6/clock.c
> +++ b/arch/arm/cpu/armv7/mx6/clock.c
> @@ -47,6 +47,17 @@ void setup_gpmi_io_clk(u32 cfg)
> MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
> MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
>
> +#if defined(CONFIG_MX6SX)
> + clrbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK);
> +
> + clrsetbits_le32(&imx_ccm->cs2cdr,
> + MXC_CCM_CS2CDR_QSPI2_CLK_PODF_MASK |
> + MXC_CCM_CS2CDR_QSPI2_CLK_PRED_MASK |
> + MXC_CCM_CS2CDR_QSPI2_CLK_SEL_MASK,
> + cfg);
> +
> + setbits_le32(&imx_ccm->CCGR4, MXC_CCM_CCGR4_QSPI2_ENFC_MASK);
> +#els
If I have well understood, this code is protected by CONFIG_NAND_MXS,
and that conflicts with what you are willing to do (setting clocks for
QSPI). I suggest to split setup_gpmi_io_clk() function, that at the
moment is ony for NAND, having something like:
void setup_gpmi_io_clk()
{
#ifdef CONFIG_NAND_MXS
...setup nand
#endif
...setup qspi
}
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list