[U-Boot] i.MX28 u-boot SPL fail

[Fabio Estevam]

Hi Marco,

On Fri, Feb 13, 2015 at 5:08 PM, Fabio Estevam <festevam at gmail.com> wrote:

> You could try this patch to have debug output from SPL:
> http://git.denx.de/?p=u-boot.git;a=commitdiff;h=950eaf6230496585e72ebb965c458d35c6c7eac1;hp=e8cdeefc222ff32a80282dd571be0426156cd9d9
>
> Make sure you have DEBUG and CONFIG_SPL_SERIAL_SUPPORT enabled.
>
> Also, double check the DDR initialization for your board.

Another thing you should check if is if you need this patch for your board:
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commitdiff;h=7a086037071401ee781425c382846dddfe80df68;hp=950eaf6230496585e72ebb965c458d35c6c7eac1

,and then define CONFIG_SYS_MXS_VDD5V_ONLY on your board config file.