[U-Boot] [PATCH v3 2/9] ARM: mx31: remove imx31_phycore board
Masahiro Yamada
yamada.m at jp.panasonic.com
Thu Feb 12 02:01:03 CET 2015
This is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
Cc: Guennadi Liakhovetski <g.liakhovetski at gmx.de>
---
Changes in v3: None
Changes in v2: None
arch/arm/Kconfig | 5 -
board/imx31_phycore/Kconfig | 12 ---
board/imx31_phycore/MAINTAINERS | 11 --
board/imx31_phycore/Makefile | 9 --
board/imx31_phycore/imx31_phycore.c | 153 ---------------------------
board/imx31_phycore/lowlevel_init.S | 88 ----------------
configs/imx31_phycore_defconfig | 2 -
configs/imx31_phycore_eet_defconfig | 3 -
doc/README.scrapyard | 1 +
include/configs/imx31_phycore.h | 202 ------------------------------------
10 files changed, 1 insertion(+), 485 deletions(-)
delete mode 100644 board/imx31_phycore/Kconfig
delete mode 100644 board/imx31_phycore/MAINTAINERS
delete mode 100644 board/imx31_phycore/Makefile
delete mode 100644 board/imx31_phycore/imx31_phycore.c
delete mode 100644 board/imx31_phycore/lowlevel_init.S
delete mode 100644 configs/imx31_phycore_defconfig
delete mode 100644 configs/imx31_phycore_eet_defconfig
delete mode 100644 include/configs/imx31_phycore.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f12dac9..d49142e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -365,10 +365,6 @@ config TARGET_INTEGRATORCP_CM1136
bool "Support integratorcp_cm1136"
select CPU_ARM1136
-config TARGET_IMX31_PHYCORE
- bool "Support imx31_phycore"
- select CPU_ARM1136
-
config TARGET_QONG
bool "Support qong"
select CPU_ARM1136
@@ -934,7 +930,6 @@ source "board/gumstix/pepper/Kconfig"
source "board/h2200/Kconfig"
source "board/hale/tt01/Kconfig"
source "board/icpdas/lp8x4x/Kconfig"
-source "board/imx31_phycore/Kconfig"
source "board/isee/igep0033/Kconfig"
source "board/jornada/Kconfig"
source "board/karo/tx25/Kconfig"
diff --git a/board/imx31_phycore/Kconfig b/board/imx31_phycore/Kconfig
deleted file mode 100644
index d3d2025..0000000
--- a/board/imx31_phycore/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_IMX31_PHYCORE
-
-config SYS_BOARD
- default "imx31_phycore"
-
-config SYS_SOC
- default "mx31"
-
-config SYS_CONFIG_NAME
- default "imx31_phycore"
-
-endif
diff --git a/board/imx31_phycore/MAINTAINERS b/board/imx31_phycore/MAINTAINERS
deleted file mode 100644
index 41f6cae..0000000
--- a/board/imx31_phycore/MAINTAINERS
+++ /dev/null
@@ -1,11 +0,0 @@
-IMX31_PHYCORE BOARD
-#M: -
-S: Maintained
-F: board/imx31_phycore/
-F: include/configs/imx31_phycore.h
-F: configs/imx31_phycore_defconfig
-
-IMX31_PHYCORE_EET BOARD
-#M: (resigned) Guennadi Liakhovetski <g.liakhovetski at gmx.de>
-S: Orphan (since 2013-09)
-F: configs/imx31_phycore_eet_defconfig
diff --git a/board/imx31_phycore/Makefile b/board/imx31_phycore/Makefile
deleted file mode 100644
index e781c13..0000000
--- a/board/imx31_phycore/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := imx31_phycore.o
-obj-y += lowlevel_init.o
diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c
deleted file mode 100644
index 3f45e4e..0000000
--- a/board/imx31_phycore/imx31_phycore.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer at pengutronix.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-#include <common.h>
-#include <s6e63d6.h>
-#include <netdev.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1,
- PHYS_SDRAM_1_SIZE);
- return 0;
-}
-
-int board_init(void)
-{
-
- gd->bd->bi_arch_number = MACH_TYPE_PCM037; /* board id for linux */
- gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
-
- return 0;
-}
-
-int board_early_init_f(void)
-{
- /* CS0: Nor Flash */
- static const struct mxc_weimcs cs0 = {
- /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
- CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 15, 0, 0, 3),
- /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
- CSCR_L(1, 0, 0, 0, 0, 1, 5, 0, 0, 0, 1, 1),
- /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
- CSCR_A(0, 0, 7, 2, 0, 0, 2, 1, 0, 0, 0, 0, 0, 0)
- };
-
- /* CS1: Network Controller */
- static const struct mxc_weimcs cs1 = {
- /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
- CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 31, 0, 0, 6),
- /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
- CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1),
- /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
- CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0)
- };
-
- /* CS4: SRAM */
- static const struct mxc_weimcs cs4 = {
- /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
- CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 24, 0, 4, 3),
- /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
- CSCR_L(2, 2, 2, 5, 2, 0, 5, 2, 0, 0, 0, 1),
- /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
- CSCR_A(2, 2, 2, 2, 0, 0, 2, 2, 0, 0, 0, 0, 0, 0)
- };
-
- mxc_setup_weimcs(0, &cs0);
- mxc_setup_weimcs(1, &cs1);
- mxc_setup_weimcs(4, &cs4);
-
- /* setup pins for UART1 */
- mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
- mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
- mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
- mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
-
- /* setup pins for I2C2 (for EEPROM, RTC) */
- mx31_gpio_mux(MUX_CSPI2_MOSI__I2C2_SCL);
- mx31_gpio_mux(MUX_CSPI2_MISO__I2C2_SDA);
-
- return 0;
-}
-
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
-#ifdef CONFIG_S6E63D6
- struct s6e63d6 data = {
- /*
- * See comment in mxc_spi.c::decode_cs() for .cs field format.
- * We use GPIO 57 as a chipselect for the S6E63D6 and chipselect
- * 2 of the SPI controller #1, since it is unused.
- */
- .cs = 2 | (57 << 8),
- .bus = 0,
- .id = 0,
- };
- int ret;
-
- /* SPI1 */
- mx31_gpio_mux(MUX_CSPI1_SCLK__CSPI1_CLK);
- mx31_gpio_mux(MUX_CSPI1_SPI_RDY__CSPI1_DATAREADY_B);
- mx31_gpio_mux(MUX_CSPI1_MOSI__CSPI1_MOSI);
- mx31_gpio_mux(MUX_CSPI1_MISO__CSPI1_MISO);
- mx31_gpio_mux(MUX_CSPI1_SS0__CSPI1_SS0_B);
- mx31_gpio_mux(MUX_CSPI1_SS1__CSPI1_SS1_B);
- mx31_gpio_mux(MUX_CSPI1_SS2__CSPI1_SS2_B);
-
- /* start SPI1 clock */
- __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 2);
-
- /* GPIO 57 */
- /* sw_mux_ctl_key_col4_key_col5_key_col6_key_col7 */
- mx31_gpio_mux(IOMUX_MODE(0x63, MUX_CTL_GPIO));
-
- /* SPI1 CS2 is free */
- ret = s6e63d6_init(&data);
- if (ret)
- return ret;
-
- /*
- * This is a "magic" sequence to initialise a C0240QGLA / C0283QGLC
- * OLED display connected to a S6E63D6 SPI display controller in the
- * 18 bit RGB mode
- */
- s6e63d6_index(&data, 2);
- s6e63d6_param(&data, 0x0182);
- s6e63d6_index(&data, 3);
- s6e63d6_param(&data, 0x8130);
- s6e63d6_index(&data, 0x10);
- s6e63d6_param(&data, 0x0000);
- s6e63d6_index(&data, 5);
- s6e63d6_param(&data, 0x0001);
- s6e63d6_index(&data, 0x22);
-#endif
- return 0;
-}
-#endif
-
-int checkboard (void)
-{
- printf("Board: Phytec phyCore i.MX31\n");
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC911X
- rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
- return rc;
-}
diff --git a/board/imx31_phycore/lowlevel_init.S b/board/imx31_phycore/lowlevel_init.S
deleted file mode 100644
index 6ea3878..0000000
--- a/board/imx31_phycore/lowlevel_init.S
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer at pengutronix.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm/arch/imx-regs.h>
-
-.macro REG reg, val
- ldr r2, =\reg
- ldr r3, =\val
- str r3, [r2]
-.endm
-
-.macro REG8 reg, val
- ldr r2, =\reg
- ldr r3, =\val
- strb r3, [r2]
-.endm
-
-.macro DELAY loops
- ldr r2, =\loops
-1:
- subs r2, r2, #1
- nop
- bcs 1b
-.endm
-
-.globl lowlevel_init
-lowlevel_init:
-
- REG IPU_CONF, IPU_CONF_DI_EN
- REG CCM_CCMR, 0x074B0BF5
-
- DELAY 0x40000
-
- REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE
- REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
-
- REG CCM_PDR0, PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0)
-
- REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0xe) | PLL_MFI(9) | PLL_MFN(0xd)
-
- REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(0x43) | PLL_MFI(12) | PLL_MFN(1)
-
- REG 0x43FAC26C, 0 /* SDCLK */
- REG 0x43FAC270, 0 /* CAS */
- REG 0x43FAC274, 0 /* RAS */
- REG 0x43FAC27C, 0x1000 /* CS2 (CSD0) */
- REG 0x43FAC284, 0 /* DQM3 */
- REG 0x43FAC288, 0 /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */
- REG 0x43FAC28C, 0
- REG 0x43FAC290, 0
- REG 0x43FAC294, 0
- REG 0x43FAC298, 0
- REG 0x43FAC29C, 0
- REG 0x43FAC2A0, 0
- REG 0x43FAC2A4, 0
- REG 0x43FAC2A8, 0
- REG 0x43FAC2AC, 0
- REG 0x43FAC2B0, 0
- REG 0x43FAC2B4, 0
- REG 0x43FAC2B8, 0
- REG 0x43FAC2BC, 0
- REG 0x43FAC2C0, 0
- REG 0x43FAC2C4, 0
- REG 0x43FAC2C8, 0
- REG 0x43FAC2CC, 0
- REG 0x43FAC2D0, 0
- REG 0x43FAC2D4, 0
- REG 0x43FAC2D8, 0
- REG 0x43FAC2DC, 0
- REG 0xB8001010, 0x00000004
- REG 0xB8001004, 0x006ac73a
- REG 0xB8001000, 0x92100000
- REG 0x80000f00, 0x12344321
- REG 0xB8001000, 0xa2100000
- REG 0x80000000, 0x12344321
- REG 0x80000000, 0x12344321
- REG 0xB8001000, 0xb2100000
- REG8 0x80000033, 0xda
- REG8 0x81000000, 0xff
- REG 0xB8001000, 0x82226080
- REG 0x80000000, 0xDEADBEEF
- REG 0xB8001010, 0x0000000c
-
- mov pc, lr
diff --git a/configs/imx31_phycore_defconfig b/configs/imx31_phycore_defconfig
deleted file mode 100644
index 563de57..0000000
--- a/configs/imx31_phycore_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_IMX31_PHYCORE=y
diff --git a/configs/imx31_phycore_eet_defconfig b/configs/imx31_phycore_eet_defconfig
deleted file mode 100644
index 9531952..0000000
--- a/configs/imx31_phycore_eet_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="IMX31_PHYCORE_EET"
-CONFIG_ARM=y
-CONFIG_TARGET_IMX31_PHYCORE=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index c6f3d14..cd51249 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
+imx31_phycore arm arm1136 - - Guennadi Liakhovetski <g.liakhovetski at gmx.de>
mx31ads arm arm1136 - - Guennadi Liakhovetski <g.liakhovetski at gmx.de>
icecube_5200 powerpc mpc5xxx 37b608a5 2015-01-23 Wolfgang Denk <wd at denx.de>
Lite5200 powerpc mpc5xxx 37b608a5 2015-01-23
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
deleted file mode 100644
index 4195fa3..0000000
--- a/include/configs/imx31_phycore.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2 at ti.com>
- * Kshitij Gupta <kshitij at ti.com>
- *
- * Configuration settings for the phyCORE-i.MX31 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
-/* High Level Configuration Options */
-#define CONFIG_MX31 /* This is a mx31 */
-#define CONFIG_MX31_CLK32 32000
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 512 * 1024)
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_CLK_OFFSET I2C2_CLK_OFFSET
-
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART1_BASE
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-
-#define CONFIG_BOOTDELAY 3
-
-#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:128k(uboot)ro," \
- "1536k(kernel),-(root)"
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.23.168
-#define CONFIG_SERVERIP 192.168.23.2
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \
- "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
- "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
- "bootargs_flash=setenv bootargs $(bootargs) " \
- "root=/dev/mtdblock2 rootfstype=jffs2\0" \
- "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0" \
- "bootcmd=run bootcmd_net\0" \
- "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs;" \
- "tftpboot 0x80000000 $(uimage);bootm\0" \
- "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash;" \
- "bootm 0x80000000\0" \
- "unlock=yes\0" \
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
- "prg_uboot=tftpboot 0x80000000 $(uboot);" \
- "protect off 0xa0000000 +0x20000;" \
- "erase 0xa0000000 +0x20000;" \
- "cp.b 0x80000000 0xa0000000 $(filesize)\0" \
- "prg_kernel=tftpboot 0x80000000 $(uimage);" \
- "erase 0xa0040000 +0x180000;" \
- "cp.b 0x80000000 0xa0040000 $(filesize)\0" \
- "prg_jffs2=tftpboot 0x80000000 $(jffs2);" \
- "erase 0xa01c0000 0xa1ffffff;" \
- "cp.b 0x80000000 0xa01c0000 $(filesize)\0" \
- "videomode=video=ctfb:x:240,y:320,depth:16,mode:0," \
- "pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1," \
- "sync:1241513985,vmode:0\0"
-
-
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE 0xa8000000
-#define CONFIG_SMC911X_32_BIT
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "uboot> "
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x10000
-
-#define CONFIG_SYS_LOAD_ADDR 0 /* default load address */
-
-#define CONFIG_CMDLINE_EDITING
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x80000000
-#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SYS_TEXT_BASE 0xA0000000
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_GBL_DATA_OFFSET)
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_BASE 0xa0000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max # of sectors/chip */
-/* Monitor at beginning of flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_ENV_OFFSET 0x00 /* env. starts here */
-#define CONFIG_ENV_SIZE 4096
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10 ms delay */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* byte addr. lenght */
-
-/*
- * CFI FLASH driver setup
- */
-#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/mtd/cfi_flash.c */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */
-
-/*
- * Timeout for Flash Erase and Flash Write
- * timeout values are in ticks
- */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ)
-
-/*
- * JFFS2 partitions
- */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-
-/* EET platform additions */
-#ifdef CONFIG_IMX31_PHYCORE_EET
-#define CONFIG_BOARD_LATE_INIT
-
-#define CONFIG_MXC_GPIO
-
-#define CONFIG_HARD_SPI
-#define CONFIG_MXC_SPI
-#define CONFIG_CMD_SPI
-
-#define CONFIG_S6E63D6
-
-#define CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_MX3
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_CMD_BMP
-#define CONFIG_BMP_16BPP
-#endif
-
-#endif /* __CONFIG_H */
--
1.9.1
More information about the U-Boot
mailing list