[U-Boot] [PATCH v2 12/16] usb: UniPhier: add UniPhier on-chip xHCI host driver support

Masahiro Yamada yamada.m at jp.panasonic.com
Fri Feb 20 13:43:23 CET 2015


Support xHCI host driver used on Panasonic UniPhier platform.

Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
Acked-by: Marek Vasut <marex at denx.de>
---

Changes in v2:
  - add the error check of fdtdec_get_addr()

 doc/README.uniphier              |  3 +-
 drivers/usb/host/Kconfig         |  8 ++++
 drivers/usb/host/Makefile        |  1 +
 drivers/usb/host/xhci-uniphier.c | 90 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 101 insertions(+), 1 deletion(-)
 create mode 100644 drivers/usb/host/xhci-uniphier.c

diff --git a/doc/README.uniphier b/doc/README.uniphier
index aaeb50c..4902533 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -73,7 +73,8 @@ Supported devices
 
  - UART (on-chip)
  - NAND
- - USB (2.0)
+ - USB 2.0 (EHCI)
+ - USB 3.0 (xHCI)
  - LAN (on-board SMSC9118)
  - I2C
  - EEPROM (connected to the on-board I2C bus)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 0e005c2..24a595f 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -17,6 +17,14 @@ config USB_XHCI
 
 if USB_XHCI_HCD
 
+config USB_XHCI_UNIPHIER
+	bool "Support for Panasonic UniPhier on-chip xHCI USB controller"
+	depends on ARCH_UNIPHIER
+	default y
+	---help---
+	  Enables support for the on-chip xHCI controller on Panasonic
+	  UniPhier SoCs.
+
 endif
 
 config USB_EHCI_HCD
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 66d6e9a..eb6f34b 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o
 obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
 obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
 obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
+obj-$(CONFIG_USB_XHCI_UNIPHIER) += xhci-uniphier.o
 
 # designware
 obj-$(CONFIG_USB_DWC2) += dwc2.o
diff --git a/drivers/usb/host/xhci-uniphier.c b/drivers/usb/host/xhci-uniphier.c
new file mode 100644
index 0000000..0dbff2d
--- /dev/null
+++ b/drivers/usb/host/xhci-uniphier.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2015 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m at jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/err.h>
+#include <usb.h>
+#include <fdtdec.h>
+#include "xhci.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define FDT		gd->fdt_blob
+#define COMPAT		"panasonic,uniphier-xhci"
+
+static int get_uniphier_xhci_base(int index, struct xhci_hccr **base)
+{
+	int offset;
+	fdt_addr_t addr;
+
+	for (offset = fdt_node_offset_by_compatible(FDT, 0, COMPAT);
+	     offset >= 0;
+	     offset = fdt_node_offset_by_compatible(FDT, offset, COMPAT)) {
+		if (index == 0) {
+			addr = fdtdec_get_addr(FDT, offset, "reg");
+			if (addr == FDT_ADDR_T_NONE)
+				return -ENODEV;
+
+			*base = (struct xhci_hccr *)addr;
+
+			return 0;
+		}
+		index--;
+	}
+
+	return -ENODEV; /* not found */
+}
+
+#define USB3_RST_CTRL		0x00100040
+#define IOMMU_RST_N		(1 << 5)
+#define LINK_RST_N		(1 << 4)
+
+static void uniphier_xhci_reset(void __iomem *base, int on)
+{
+	u32 tmp;
+
+	tmp = readl(base + USB3_RST_CTRL);
+
+	if (on)
+		tmp &= ~(IOMMU_RST_N | LINK_RST_N);
+	else
+		tmp |= IOMMU_RST_N | LINK_RST_N;
+
+	writel(tmp, base + USB3_RST_CTRL);
+}
+
+int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
+{
+	int ret;
+	struct xhci_hccr *cr;
+	struct xhci_hcor *or;
+
+	ret = get_uniphier_xhci_base(index, &cr);
+	if (ret < 0)
+		return ret;
+
+	uniphier_xhci_reset(cr, 0);
+
+	or = (void *)cr + HC_LENGTH(xhci_readl(&cr->cr_capbase));
+
+	*hccr = cr;
+	*hcor = or;
+
+	return 0;
+}
+
+void xhci_hcd_stop(int index)
+{
+	int ret;
+	struct xhci_hccr *cr;
+
+	ret = get_uniphier_xhci_base(index, &cr);
+	if (ret < 0)
+		return;
+
+	uniphier_xhci_reset(cr, 1);
+}
-- 
1.9.1



More information about the U-Boot mailing list