[U-Boot] [PATCH v3 20/25] tegra: dts: nyan-big: Add definitions for eDP display

[Simon Glass]

Add the various host1x peripherals to allow an eDP display to be connected.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v3: None
Changes in v2: None

 arch/arm/dts/tegra124-nyan-big.dts | 43 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm/dts/tegra124-nyan-big.dts b/arch/arm/dts/tegra124-nyan-big.dts
index 10e1914..8ac770b 100644
--- a/arch/arm/dts/tegra124-nyan-big.dts
+++ b/arch/arm/dts/tegra124-nyan-big.dts
@@ -29,6 +29,35 @@
 		reg = <0x80000000 0x80000000>;
 	};
 
+	host1x at 50000000 {
+		dc at 54200000 {
+			display-timings {
+				timing at 0 {
+					clock-frequency = <69500000>;
+					hactive = <1366>;
+					vactive = <768>;
+					hsync-len = <32>;
+					hfront-porch = <48>;
+					hback-porch = <20>;
+					vfront-porch = <3>;
+					vback-porch = <13>;
+					vsync-len = <6>;
+				};
+			};
+		};
+
+		sor at 54540000 {
+			status = "okay";
+
+			nvidia,dpaux = <&dpaux>;
+			nvidia,panel = <&panel>;
+		};
+
+		dpaux at 545c0000 {
+			status = "okay";
+		};
+	};
+
 	serial at 70006000 {
 		/* Debug connector on the bottom of the board near SD card. */
 		status = "okay";
@@ -256,6 +285,7 @@
 		compatible = "pwm-backlight";
 
 		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_led>;
 		pwms = <&pwm 1 1000000>;
 
 		default-brightness-level = <224>;
@@ -339,6 +369,19 @@
 		backlight = <&backlight>;
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd_led: regulator at 5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "+VDD_LED";
+			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-max98090-nyan-big",
 			     "nvidia,tegra-audio-max98090";
-- 
2.2.0.rc0.207.ga3a616c