[U-Boot] [PATCH] edminiv2: switch to SPL
Albert ARIBAUD
albert.u.boot at aribaud.net
Wed Feb 25 09:07:08 CET 2015
On Sat, 31 Jan 2015 22:55:38 +0100, Albert ARIBAUD <albert.u.boot at aribaud.net> wrote:
> ED Mini V2 is based on Orion 5x which boots at fixed
> address 0xFFFF0000 in NOR Flash. Place SPL there, and
> switch U-Boot from .bin to .img format, stored in
> NOR Flash at 0xFFF90000.
>
> Note: this patch was tested on HW and works, i.e.
> it boots U-Boot properly, but SPL console output
> currently does not appear, due to GD being trashed
> by arch/arm/lib/spl.c. This trashing is soon to be
> removed, and then ED Mini V2 SPL console output will
> become visible.
>
> Signed-off-by: Albert ARIBAUD <albert.u.boot at aribaud.net>
> ---
> arch/arm/cpu/arm926ejs/orion5x/Kconfig | 1 +
> arch/arm/cpu/arm926ejs/orion5x/cpu.c | 2 +
> arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S | 14 +++++-
> arch/arm/cpu/arm926ejs/orion5x/u-boot-spl.lds | 61 ++++++++++++++++++++++++++
> arch/arm/include/asm/arch-orion5x/spl.h | 10 +++++
> board/LaCie/edminiv2/edminiv2.c | 20 +++++++++
> configs/edminiv2_defconfig | 7 +--
> include/configs/edminiv2.h | 23 +++++++++-
> 8 files changed, 132 insertions(+), 6 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/orion5x/u-boot-spl.lds
> create mode 100644 arch/arm/include/asm/arch-orion5x/spl.h
>
> diff --git a/arch/arm/cpu/arm926ejs/orion5x/Kconfig b/arch/arm/cpu/arm926ejs/orion5x/Kconfig
> index 5a54262..291c511 100644
> --- a/arch/arm/cpu/arm926ejs/orion5x/Kconfig
> +++ b/arch/arm/cpu/arm926ejs/orion5x/Kconfig
> @@ -5,6 +5,7 @@ choice
>
> config TARGET_EDMINIV2
> bool "LaCie Ethernet Disk mini V2"
> + select SUPPORT_SPL
>
> endchoice
>
> diff --git a/arch/arm/cpu/arm926ejs/orion5x/cpu.c b/arch/arm/cpu/arm926ejs/orion5x/cpu.c
> index f88db3b..2ecd385 100644
> --- a/arch/arm/cpu/arm926ejs/orion5x/cpu.c
> +++ b/arch/arm/cpu/arm926ejs/orion5x/cpu.c
> @@ -234,7 +234,9 @@ int arch_cpu_init(void)
> /* Enable and invalidate L2 cache in write through mode */
> invalidate_l2_cache();
>
> +#ifdef CONFIG_SPL_BUILD
> orion5x_config_adr_windows();
> +#endif
>
> return 0;
> }
> diff --git a/arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S b/arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S
> index 4dacc29..51a8b3c 100644
> --- a/arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S
> +++ b/arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S
> @@ -62,14 +62,16 @@
> /*
> * Low-level init happens right after start.S has switched to SVC32,
> * flushed and disabled caches and disabled MMU. We're still running
> - * from the boot chip select, so the first thing we should do is set
> - * up RAM for us to relocate into.
> + * from the boot chip select, so the first thing SPL should do is to
> + * set up the RAM to copy U-Boot into.
> */
>
> .globl lowlevel_init
>
> lowlevel_init:
>
> +#ifdef CONFIG_SPL_BUILD
> +
> /* Use 'r4 as the base for internal register accesses */
> ldr r4, =ORION5X_REGS_PHY_BASE
>
> @@ -273,5 +275,13 @@ lowlevel_init:
> orr r2, r2, r6
> str r2, [r3, #0x484]
>
> + /* enable for 2 GB DDR; detection should find out real amount */
> + sub r6, r6, r6
> + str r6, [r3, #0x500]
> + ldr r6, =0x7fff0001
> + str r6, [r3, #0x504]
> +
> +#endif /* CONFIG_SPL_BUILD */
> +
> /* Return to U-boot via saved link register */
> mov pc, lr
> diff --git a/arch/arm/cpu/arm926ejs/orion5x/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/orion5x/u-boot-spl.lds
> new file mode 100644
> index 0000000..6f7fca0
> --- /dev/null
> +++ b/arch/arm/cpu/arm926ejs/orion5x/u-boot-spl.lds
> @@ -0,0 +1,61 @@
> +/*
> + * (C) Copyright 2014 Albert ARIBAUD <albert.u.boot at aribaud.net>
> + *
> + * Based on:
> + *
> + * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
> + * Tom Cubie <tangliang at allwinnertech.com>
> + *
> + * Based on omap-common/u-boot-spl.lds:
> + *
> + * (C) Copyright 2002
> + * Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
> + *
> + * (C) Copyright 2010
> + * Texas Instruments, <www.ti.com>
> + * Aneesh V <aneesh at ti.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +MEMORY { .nor : ORIGIN = CONFIG_SPL_TEXT_BASE,\
> + LENGTH = CONFIG_SPL_MAX_SIZE }
> +MEMORY { .bss : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
> + LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
> +
> +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
> +OUTPUT_ARCH(arm)
> +ENTRY(_start)
> +SECTIONS
> +{
> + .text :
> + {
> + __start = .;
> + *(.vectors)
> + CPUDIR/start.o (.text)
> + *(.text*)
> + } > .nor
> +
> + . = ALIGN(4);
> + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.nor
> +
> + . = ALIGN(4);
> + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.nor
> +
> + . = ALIGN(4);
> + .u_boot_list : {
> + KEEP(*(SORT(.u_boot_list*)));
> + } > .nor
> +
> + . = ALIGN(4);
> + __image_copy_end = .;
> + _end = .;
> +
> + .bss :
> + {
> + . = ALIGN(4);
> + __bss_start = .;
> + *(.bss*)
> + . = ALIGN(4);
> + __bss_end = .;
> + } > .bss
> +}
> diff --git a/arch/arm/include/asm/arch-orion5x/spl.h b/arch/arm/include/asm/arch-orion5x/spl.h
> new file mode 100644
> index 0000000..23745bc
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-orion5x/spl.h
> @@ -0,0 +1,10 @@
> +/*
> + * (C) Copyright 2014 Albert ARIBAUD <albert.u.boot at aribaud.net>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _ASM_ARCH_SPL_H_
> +#define _ASM_ARCH_SPL_H_
> +
> +#define BOOT_DEVICE_NOR 1
> diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c
> index 80ec7fa..2983201 100644
> --- a/board/LaCie/edminiv2/edminiv2.c
> +++ b/board/LaCie/edminiv2/edminiv2.c
> @@ -12,6 +12,8 @@
> #include <miiphy.h>
> #include <asm/arch/orion5x.h>
> #include "../common/common.h"
> +#include <spl.h>
> +#include <ns16550.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
> @@ -83,3 +85,21 @@ void reset_phy(void)
> mv_phy_88e1116_init("egiga0", 8);
> }
> #endif /* CONFIG_RESET_PHY_R */
> +
> +/*
> + * SPL serial setup and NOR boot device selection
> + */
> +
> +#ifdef CONFIG_SPL_BUILD
> +
> +void spl_board_init(void)
> +{
> + preloader_console_init();
> +}
> +
> +u32 spl_boot_device(void)
> +{
> + return BOOT_DEVICE_NOR;
> +}
> +
> +#endif /* CONFIG_SPL_BUILD */
> diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig
> index 3b1a6c1..20c1c65 100644
> --- a/configs/edminiv2_defconfig
> +++ b/configs/edminiv2_defconfig
> @@ -1,3 +1,4 @@
> -CONFIG_ARM=y
> -CONFIG_ORION5X=y
> -CONFIG_TARGET_EDMINIV2=y
> +CONFIG_SPL=y
> ++S:CONFIG_ARM=y
> ++S:CONFIG_ORION5X=y
> ++S:CONFIG_TARGET_EDMINIV2=y
> diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
> index 47da4a9..ee5f76b 100644
> --- a/include/configs/edminiv2.h
> +++ b/include/configs/edminiv2.h
> @@ -13,10 +13,31 @@
> #define _CONFIG_EDMINIV2_H
>
> /* general settings */
> -#define CONFIG_SYS_TEXT_BASE 0xfff90000
> #define CONFIG_SYS_GENERIC_BOARD
>
> /*
> + * SPL
> + */
> +
> +#define CONFIG_SPL_FRAMEWORK
> +#define CONFIG_SPL_LIBGENERIC_SUPPORT
> +#define CONFIG_SPL_LIBCOMMON_SUPPORT
> +#define CONFIG_SPL_SERIAL_SUPPORT
> +#define CONFIG_SPL_NOR_SUPPORT
> +#define CONFIG_SPL_TEXT_BASE 0xffff0000
> +#define CONFIG_SPL_MAX_SIZE 0x0000fff0
> +#define CONFIG_SPL_STACK 0x00020000
> +#define CONFIG_SPL_BSS_START_ADDR 0x00020000
> +#define CONFIG_SPL_BSS_MAX_SIZE 0x0001ffff
> +#define CONFIG_SYS_SPL_MALLOC_START 0x00040000
> +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x0001ffff
> +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/orion5x/u-boot-spl.lds"
> +#define CONFIG_SPL_BOARD_INIT
> +#define CONFIG_SYS_UBOOT_BASE 0xfff90000
> +#define CONFIG_SYS_UBOOT_START 0x00800000
> +#define CONFIG_SYS_TEXT_BASE 0x00800000
> +
> +/*
> * Version number information
> */
>
> --
> 2.1.0
>
Applied to u-boot-arm/master.
Amicalement,
--
Albert.
More information about the U-Boot
mailing list