[U-Boot] [RFC] m68k: generic board

[Angelo Dureghello]

On 06/02/2015 17:02, Tom Rini wrote:
> On Mon, Jan 26, 2015 at 09:39:13AM +0000, Huan Wang wrote:
>> Hi, Tom,
>>
>>> On Thu, Jan 15, 2015 at 04:08:40PM +0100, Angelo Dureghello wrote:
>>>> Dear all,
>>>>
>>>> i would like to post a patch with the m68k generic board support,
>>>> tested and working here, but of course not tested for all the other
>>>> m68k boards except mine.
>>>>
>>>> My coldfire board is the "amcore" board not yet accepted.
>>>>
>>>> http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/193661
>>>> http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/193660
>>>>
>>>> I need some suggestions on how to proceed now.
>>>>
>>>> I already modified my board config to work with generic board support.
>>>>
>>>> So my thought is to post 2 separate patches:
>>>> 1
>>>> - add generic board (1/1). Each board maintainer should then test it
>>>> and report for feedbacks.
>>>> 2
>>>> Re-post a 2/2 patch (v8) of amcore using generic board:
>>>> - amcore board (1),
>>>> - mcf5307 support (2),
>>>>
>>>> This amcore board is the coldfire base i use here for all the general
>>>> m68k tests.
>>>>
>>>> With your help commenting on this patch until it is conformant to the
>>>> last recent coding guidelines could help me and Alison to know what
>>>> has to be purged / changed, (eventually, if needed) in all other m68k
>>>> boards code.
>>>>
>>>> What do you think ?
>>>
>>> Lets go with #2 and we'll purge the rest of the boards that you don't
>>> want to convert and compile test after -rc1.  Thanks!
>>>
>> [Alison Wang] Do you mean you will purge the rest of the boards if
>> they are not converted and tested?
>>
>> I have these boards, such as m52277evb, m5253demo, m53017evb,
>> m5329evb, m5373evb, m54418twr, m54451evb, m54455evb, m547xevb and
>> m548xevb. I think I really need some time to convert and test them.
>
> Please get them converted ASAP and remove the rest of the boards which
> you do not plan to support.  Thanks!

Dear Tom and all,

so basically, i posted a patch with with 1 and 2 together, since 
"amcore" board and m68k generic-board additions was connected.

Alison then added some changes over my generic-board patch.

What is now the correct way to proceed, as m68k custodians ? We need to
wait for feedbacks/ack on the patches or, at what stage could we apply
this patches into the u-boot-coldfire repo ?

Thanks,

Best regards,
Angelo Dureghello