[U-Boot] [PATCH v1 1/1] usb: gadget: fastboot: Add fastboot erase
Dileep Katta
dileep.katta at linaro.org
Thu Feb 12 09:29:58 CET 2015
Hi Steve,
On 11 February 2015 at 05:25, Steve Rae <srae at broadcom.com> wrote:
>
> Hi, Dileep
>
>
> On 15-02-10 12:49 AM, Dileep Katta wrote:
>>
>> Adds the fastboot erase functionality, to erase a partition
>> specified by name. The erase is performed based on erase group size,
>> to avoid erasing other partitions. The start address and the size
>> is aligned to the erase group size for this.
>>
>> Currently only supports erasing from eMMC.
>>
>> Signed-off-by: Dileep Katta <dileep.katta at linaro.org>
>> ---
>> Note: The changes are on top of oem command support added by robh at kernel.org
>>
>> common/fb_mmc.c | 58 +++++++++++++++++++++++++++++++++++++++++
>> drivers/usb/gadget/f_fastboot.c | 23 ++++++++++++++++
>> include/fb_mmc.h | 1 +
>> 3 files changed, 82 insertions(+)
>>
>> diff --git a/common/fb_mmc.c b/common/fb_mmc.c
>> index 6ea3938..3911989 100644
>> --- a/common/fb_mmc.c
>> +++ b/common/fb_mmc.c
>> @@ -10,6 +10,7 @@
>> #include <part.h>
>> #include <aboot.h>
>> #include <sparse_format.h>
>> +#include <mmc.h>
>>
>> #ifndef CONFIG_FASTBOOT_GPT_NAME
>> #define CONFIG_FASTBOOT_GPT_NAME GPT_ENTRY_NAME
>> @@ -110,3 +111,60 @@ void fb_mmc_flash_write(const char *cmd, void *download_buffer,
>> write_raw_image(dev_desc, &info, cmd, download_buffer,
>> download_bytes);
>> }
>> +
>> +void fb_mmc_erase(const char *cmd, char *response)
>> +{
>> + int ret;
>> + block_dev_desc_t *dev_desc;
>> + disk_partition_t info;
>> + lbaint_t blks, blks_start, blks_size, grp_size;
>> + struct mmc *mmc = find_mmc_device(CONFIG_FASTBOOT_FLASH_MMC_DEV);
>> +
>> + if (mmc == NULL) {
>> + error("invalid mmc device\n");
>
> no newline with error()
Will remove
>
>> + fastboot_fail("invalid mmc device");
>> + return;
>> + }
>> +
>> + /* initialize the response buffer */
>> + response_str = response;
>> +
>> + dev_desc = get_dev("mmc", CONFIG_FASTBOOT_FLASH_MMC_DEV);
>> + if (!dev_desc || dev_desc->type == DEV_TYPE_UNKNOWN) {
>> + error("invalid mmc device\n");
>
> no newline with error()
Will remove
>
>
>> + fastboot_fail("invalid mmc device");
>> + return;
>> + }
>> +
>> + ret = get_partition_info_efi_by_name(dev_desc, cmd, &info);
>> + if (ret) {
>> + error("cannot find partition: '%s'\n", cmd);
>
> no newline with error()
Will remove
>
>> + fastboot_fail("cannot find partition");
>> + return;
>> + }
>> +
>> + puts("Erasing partition\n");
>> +
>> + /* Align blocks to erase group size to avoid erasing other partitions */
>> + grp_size = mmc->erase_grp_size;
>> + blks_start = (info.start + grp_size - 1) & ~(grp_size - 1);
>> + if (info.size >= grp_size)
>> + blks_size = (info.size - (blks_start - info.start)) &
>> + (~(grp_size - 1));
>> + else
>> + blks_size = 0;
>
>
> Is this logic correct??? Isn't the "erase_grp_size" in bytes? and the info.start & info.size in LBA's?
Yes, the math will take care of it. Ref: mmc_berase()
>
>
>> +
>> + printf("Erasing blocks " LBAFU " to " LBAFU " due to alignment\n",
>> + blks_start, blks_start + blks_size);
>> +
>> + blks = dev_desc->block_erase(dev_desc->dev, blks_start, blks_size);
>> + if (blks != blks_size) {
>> + error("failed erasing from device %d\n", dev_desc->dev);
>
> no newline with error()
Will remove
>
>> + fastboot_fail("failed erasing from device");
>> + return;
>> + }
>> +
>> + printf("........ erased " LBAFU " bytes from '%s'\n",
>> + blks_size * info.blksz, cmd);
>> + fastboot_okay("");
>> +}
>> diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
>> index f7d84bf..a8d8205 100644
>> --- a/drivers/usb/gadget/f_fastboot.c
>> +++ b/drivers/usb/gadget/f_fastboot.c
>> @@ -535,6 +535,26 @@ static void cb_oem(struct usb_ep *ep, struct usb_request *req)
>> }
>> }
>>
>> +static void cb_erase(struct usb_ep *ep, struct usb_request *req)
>> +{
>> + char *cmd = req->buf;
>> + char response[RESPONSE_LEN];
>> +
>> + strsep(&cmd, ":");
>> + if (!cmd) {
>> + error("missing partition name\n");
>
> no newline with error()
Will remove
>
>> + fastboot_tx_write_str("FAILmissing partition name");
>> + return;
>> + }
>> +
>> + strcpy(response, "FAILno flash device defined");
>> +
>> +#ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV
>> + fb_mmc_erase(cmd, response);
>> +#endif
>> + fastboot_tx_write_str(response);
>> +}
>> +
>> struct cmd_dispatch_info {
>> char *cmd;
>> void (*cb)(struct usb_ep *ep, struct usb_request *req);
>> @@ -566,6 +586,9 @@ static const struct cmd_dispatch_info cmd_dispatch_info[] = {
>> {
>> .cmd = "oem",
>> .cb = cb_oem,
>> + }, {
>> + .cmd = "erase",
>> + .cb = cb_erase,
>> },
>> };
>>
>> diff --git a/include/fb_mmc.h b/include/fb_mmc.h
>> index 1ad1d13..402ba9b 100644
>> --- a/include/fb_mmc.h
>> +++ b/include/fb_mmc.h
>> @@ -6,3 +6,4 @@
>>
>> void fb_mmc_flash_write(const char *cmd, void *download_buffer,
>> unsigned int download_bytes, char *response);
>> +void fb_mmc_erase(const char *cmd, char *response);
>>
Thanks for the review. Will send v2 with changes.
Regards,
Dileep
More information about the U-Boot
mailing list