[U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
sbabic at denx.de
Tue Feb 10 13:19:46 CET 2015
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit ab77f24119e80257de4ab017b877f92f96980562:
Merge branch 'master' of git://git.denx.de/u-boot-ti (2015-01-16
10:25:01 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to aee0013e53b339a573e2a8d66062fe87765aa3bd:
mx53loco: Fix boot hang during reboot stress test (2015-02-10 12:48:50
+0100)
----------------------------------------------------------------
Alexandre Coffignal (1):
mxsboot : Support of 224-bytes OOB area length
Christian Gmeiner (7):
ot1200: select SUPPORT_SPL
ot1200: make use of imx_ddr_size(..)
ot1200: move ccgr and gpr init to c functions
ot1200: enable spi clock directly in ccgr_init(..)
ot1200: add SPL configuration
ot1200: add basic SPL support
ot1200: add ot1200_spl_defconfig file
Fabio Estevam (2):
mx6sxsabresd: Remove unneeded board_late_init()
mx53loco: Fix boot hang during reboot stress test
Graeme Russ (3):
arm: mxs: Add debug outputs and comments to mxs SPL source files
arm: mxs: Enable booting of mx28 without battery
arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode
Heiko Schocher (1):
arm, imx6, aristainetos: board updates
Nikita Kiryanov (14):
arm: mx6: cm-fx6: expand boot sequence
arm: mx6: cm-fx6: change dtb node for ethaddr
compulab: eeprom: allow reading mac address from multiple eeproms
arm: mx6: cm-fx6: pass 2nd nic mac addr to Linux
arm: mx6: cm-fx6: increase size of malloc area
arm: mx6: cm-fx6: add hdmi console support
arm: mx6: cm-fx6: display compulab logo
arm: mx6: cm-fx6: add support for usb keyboard
compulab: splash: use errno values
compulab: splash: refactor splash.c
compulab: splash: support multiple splash sources
compulab: splash: support loading splash from sf
arm: mx6: cm-fx6: add splash screen support
common: convert compulab splash load code to common code
Otavio Salvador (1):
wandboard: Use 32bit color depth for Fusion LCD
Peng Fan (9):
imx:mx6sxsabresd add spl config file
imx:mx6sxsabresd select SUPPORT_SPL
imx:mx6sxsabresd spl support in header file
imx:mx6sx add dram io configure for mx6sx
imx:mx6 add mx6sx in imx spl header file
imx:mx6sxsabresd board spl support
imx:mx6 update fuse_bank0_regs
pmic:pfuze add macro for setting voltage
pmic:pfuz100 add switch mode and more registers
Stefan Roese (1):
arm: mx6: Add Barco platinum-picon and platinum-titanium
Stefano Babic (1):
mx6: fix warning in platinum board
Ye.Li (4):
imx: mx6: Change ENV offset to 512K bytes for larger u-boot image
imx: mx6qsabreauto: Change to use common GPMI IO clock function
imx: imximage: Add QuadSPI boot support
imx: mx6: Fixed AIPS3 base address issue
arch/arm/Kconfig | 13 ++++
arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 6 ++
arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c | 13 +++-
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 18 ++++++
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 110
++++++++++++++++++++++++++++++++--
arch/arm/cpu/armv7/mx6/ddr.c | 96
+++++++++++++++++++++++++-----
arch/arm/cpu/armv7/mx6/soc.c | 2 +-
arch/arm/include/asm/arch-mx6/imx-regs.h | 16 +++--
arch/arm/include/asm/arch-mx6/mx6-ddr.h | 46 ++++++++++++++
arch/arm/include/asm/arch-mxs/sys_proto.h | 17 ++++++
board/aristainetos/aristainetos.c | 8 +--
board/bachmann/ot1200/Makefile | 4 ++
board/bachmann/ot1200/mx6q_4x_mt41j128.cfg | 14 -----
board/bachmann/ot1200/ot1200.c | 34 +++++++++--
board/bachmann/ot1200/ot1200_spl.c | 162
++++++++++++++++++++++++++++++++++++++++++++++++++
board/barco/platinum/Kconfig | 37 ++++++++++++
board/barco/platinum/MAINTAINERS | 7 +++
board/barco/platinum/Makefile | 14 +++++
board/barco/platinum/platinum.c | 217
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/barco/platinum/platinum.h | 89
++++++++++++++++++++++++++++
board/barco/platinum/platinum_picon.c | 244
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/barco/platinum/platinum_titanium.c | 209
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/barco/platinum/spl_picon.c | 182
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/barco/platinum/spl_titanium.c | 185
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/compulab/cm_fx6/cm_fx6.c | 95
++++++++++++++++++++++++++---
board/compulab/cm_t335/cm_t335.c | 2 +-
board/compulab/cm_t35/cm_t35.c | 14 ++++-
board/compulab/cm_t3517/cm_t3517.c | 2 +-
board/compulab/cm_t54/cm_t54.c | 2 +-
board/compulab/common/Makefile | 1 -
board/compulab/common/common.h | 9 ---
board/compulab/common/eeprom.c | 20 ++++---
board/compulab/common/eeprom.h | 4 +-
board/compulab/common/splash.c | 72 ----------------------
board/freescale/mx53loco/imximage.cfg | 3 +-
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 25 +-------
board/freescale/mx6sxsabresd/MAINTAINERS | 1 +
board/freescale/mx6sxsabresd/mx6sxsabresd.c | 171
++++++++++++++++++++++++++++++++++++++++++++++++++--
common/Makefile | 1 +
common/splash_source.c | 176
++++++++++++++++++++++++++++++++++++++++++++++++++++++
configs/mx6sxsabresd_spl_defconfig | 4 ++
configs/ot1200_spl_defconfig | 4 ++
configs/platinum_picon_defconfig | 4 ++
configs/platinum_titanium_defconfig | 4 ++
doc/README.splashprepare | 13 ++++
include/configs/aristainetos.h | 167
++++++++++++++++++++++++++++-----------------------
include/configs/cm_fx6.h | 158
++++++++++++++++++++++++++++---------------------
include/configs/cm_t35.h | 1 +
include/configs/imx6_spl.h | 8 +++
include/configs/mx6slevk.h | 2 +-
include/configs/mx6sxsabresd.h | 9 ++-
include/configs/ot1200.h | 11 +++-
include/configs/platinum.h | 319
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/configs/platinum_picon.h | 31 ++++++++++
include/configs/platinum_titanium.h | 38 ++++++++++++
include/configs/wandboard.h | 2 +-
include/power/pfuze100_pmic.h | 55 +++++++++++++++++
include/splash.h | 11 ++++
tools/imximage.c | 2 +
tools/imximage.h | 2 +
tools/logos/compulab.bmp | Bin 0 -> 31810 bytes
tools/mxsboot.c | 6 ++
62 files changed, 2863 insertions(+), 329 deletions(-)
create mode 100644 board/bachmann/ot1200/ot1200_spl.c
create mode 100644 board/barco/platinum/Kconfig
create mode 100644 board/barco/platinum/MAINTAINERS
create mode 100644 board/barco/platinum/Makefile
create mode 100644 board/barco/platinum/platinum.c
create mode 100644 board/barco/platinum/platinum.h
create mode 100644 board/barco/platinum/platinum_picon.c
create mode 100644 board/barco/platinum/platinum_titanium.c
create mode 100644 board/barco/platinum/spl_picon.c
create mode 100644 board/barco/platinum/spl_titanium.c
delete mode 100644 board/compulab/common/splash.c
create mode 100644 common/splash_source.c
create mode 100644 configs/mx6sxsabresd_spl_defconfig
create mode 100644 configs/ot1200_spl_defconfig
create mode 100644 configs/platinum_picon_defconfig
create mode 100644 configs/platinum_titanium_defconfig
create mode 100644 include/configs/platinum.h
create mode 100644 include/configs/platinum_picon.h
create mode 100644 include/configs/platinum_titanium.h
create mode 100644 tools/logos/compulab.bmp
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list