[U-Boot] [PATCH 3/4] sunxi: video: Add support for tl059wv5c0 lcd panels

[Hans de Goede]

Add support for the 6" 480x800 tl059wv5c0 panel used on e.g. Utoo P66 and
Aigo M60/M608/M606 tablets.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 board/sunxi/Kconfig           | 8 ++++++++
 drivers/video/sunxi_display.c | 7 +++++++
 2 files changed, 15 insertions(+)

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index ef59e21..19e7286 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -411,6 +411,14 @@ config VIDEO_LCD_PANEL_HITACHI_TX18D42VM
 	---help---
 	7.85" 1024x768 Hitachi tx18d42vm LCD panel support
 
+config VIDEO_LCD_TL059WV5C0
+	bool "tl059wv5c0 LCD panel"
+	select VIDEO_LCD_PANEL_I2C
+	select VIDEO_LCD_IF_PARALLEL
+	---help---
+	Say Y here to add support for the 6" 480x800 tl059wv5c0 panel used
+	on e.g. Utoo P66 and Aigo M60/M608/M606 tablets.
+
 endchoice
 
 
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index 7f01401..4e12150 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -18,6 +18,7 @@
 #include <errno.h>
 #include <fdtdec.h>
 #include <fdt_support.h>
+#include <i2c.h>
 #include <video_fb.h>
 #include "videomodes.h"
 #include "hitachi_tx18d42vm_lcd.h"
@@ -1030,6 +1031,12 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode,
 			mdelay(50); /* Wait for lcd controller power on */
 			hitachi_tx18d42vm_init();
 		}
+		if (IS_ENABLED(CONFIG_VIDEO_LCD_TL059WV5C0)) {
+			unsigned int orig_i2c_bus = i2c_get_bus_num();
+			i2c_set_bus_num(CONFIG_VIDEO_LCD_I2C_BUS);
+			i2c_reg_write(0x5c, 0x04, 0x42); /* Turn on the LCD */
+			i2c_set_bus_num(orig_i2c_bus);
+		}
 		sunxi_composer_mode_set(mode, address);
 		sunxi_lcdc_tcon0_mode_set(mode, false);
 		sunxi_composer_enable();
-- 
2.1.0